arXiv subjects

Chengxin Zhao

Publications and source records attributed to Chengxin Zhao.

13 recordsLinked to original sources

arXiv2026

In-situ operation of amorphous circuits under heavy-ion irradiation

Radiation-hardened electronics using semiconductors beyond silicon are essential for computation and control in extreme environments. Yet complex digital circuits based on such material platforms operating in situ under heavy-ion irradiation remain largely unexplored. Here, we show a timing circuit based on amorphous thin-film semiconductors at the 100-transistor scale, and demonstrate its robust operation through a functional "Hello World" ASCII output sequence. Beyond static device characterization, we evaluate the circuit under powered heavy-ion irradiation using tantalum ions, providing an operationally relevant assessment of radiation tolerance at the system level. Under a high particle flux of 2.5 x 10^3 ions cm^-2 s^-1, the circuit maintains stable operation during the irradiation test, achieving a total fluence of 1 x 10^6 ions cm^-2, establishing a milestone of prolonged powered digital operation under extreme conditions. Our work expands the design space of radiation-tolerant electronics, highlighting amorphous semiconductors as a promising foundation for digital circuits deployed in harsh environments.

cond-mat.mtrl-sci↗

arXiv2025

Huizhou Hadron Spectrometer -- a Proposed High-rate Experimental Setup at the High Intensity Heavy-ion Accelerator Facility

The High-Intensity Heavy-Ion Accelerator Facility (HIAF), currently under construction in Huizhou, Guangdong Province, China, is projected to be completed by 2025. This facility will be capable of producing proton and heavy-ion beams with energies reaching several GeV, thereby offering a versatile platform for advanced fundamental physics research. Key scientific objectives include exploring physics beyond the Standard Model through the search for novel particles and interactions, testing fundamental symmetries, investigating exotic hadronic states such as di-baryons, pentaquark states and multi-strange hypernuclei, conducting precise measurements of hadron and hypernucleus properties, and probing the phase boundary and critical point of nuclear matter. To facilitate these investigations, we propose the development of a dedicated experimental apparatus at HIAF - the Huizhou Hadron Spectrometer (HHaS). This paper presents the conceptual design of HHaS, comprising a solenoid magnet, a five-dimensional silicon pixel tracker, a Low-Gain Avalanche Detector (LGAD) for time-of-flight measurements, and a Cherenkov-scintillation dual-readout electromagnetic calorimeter. The design anticipates an unprecedented event rate of 1-100 MHz, extensive particle acceptance, a track momentum resolution at 1% level, an electromagnetic energy resolution of ~3% @ 1 GeV and multi-particle identification capabilities. Such capabilities position HHaS as a powerful instrument for advancing experimental studies in particle and nuclear physics. The successful realization of HHaS is expected to significantly bolster the development of medium- and high-energy physics research within China.

hep-ex↗

arXiv2025

Simulation of radiation environment for the beam monitor of CEE experiment

The cooling storage ring external-target experiment is a large-scale nuclear physics experiment, which aims to study the physics of heavy-ion collisions at low temperatures and high baryon densities. A beam monitor (BM) is placed in the beam line to monitor the beam status and to improve the reconstruction resolution of the primary vertices. The radiation dose and particle fluence stemming from the beam interactions with gases and detector materials affect the performance of the sensors and electronics of BM. This paper uses FLUKA Monte Carlo code to simulate the radiation environment of BM detector. Radiation quantities including the total ionizing dose, 1 MeV neutron equivalent fluence, high-energy hadron flux, thermal neutron flux, and nuclear fragment flux are presented. Results of alternative simulation setups, including adding shielding layers inside the BM, are also investigated.

physics.ins-det↗

arXiv2025

Design and performance of the prototype gaseous beam monitor with GEM and pixel sensors for the CSR external-target experiment

A gaseous beam monitor utilizing gas electron multiplier (GEM) and pixel sensors is being developed for the Cooling Storage Ring (CSR) External-target Experiment (CEE) at Heavy Ion Research Facility in Lanzhou (HIRFL). The beam monitor is mainly used to track each beam particle, providing an accurate reconstruction of the primary vertex of the collision. Two generations of the pixel sensors (named Topmetal-CEE) were produced, with the second generation's performance improving over the first one. The design and performance of the prototype are described in the paper. Characterization of the prototype with heavy-ion beams and laser beams are presented, showing a spatial resolution better than 50 $\mum$ and a time resolution better than 15 ns.

physics.ins-det↗

arXiv2025

Development of a simulation and analysis framework for N{\nu}DEx experiment

N$\nu$DEx aims to search for the neutrinoless double beta decay in $^{82}$Se using a high pressure $^{82}$SeF$_6$ gas time projection chamber (TPC). This paper presents a simulation and analysis framework developed specifically for the N$\nu$DEx experiment. Using density functional theory and two-temperature theory, the reduced mobilities of SeF$_5^-$ and SeF$_6^-$ ions in SeF$_6$ were calculated, yielding values of 0.444 and 0.430 $\mathrm{cm^2V^{-1}s^{-1}}$ respectively, with an estimated uncertainty within 3\%. The TPC geometry, featuring a cathode, focusing plane, and anode structure, was modeled in COMSOL to compute electric fields. Signal and background events were generated using BxDecay0 and Geant4, while Garfield++ was employed to simulate charge transport and signal induction. Three-dimensional tracks were reconstructed from drift-time differences between the two assumed ion species using a breadth-first search algorithm. To demonstrate the framework's analytical capability, topological variables were taken from reconstructed tracks and used to define selection criteria. A boosted decision tree was then implemented to benchmark the signal-background separation. This simulation framework successfully validates the complete experimental workflow, serving as a robust tool for detector design and future sensitivity studies in the N$\nu$DEx experiment.

physics.ins-det↗

arXiv2024

END$^2$: Robust Dual-Decoder Watermarking Framework Against Non-Differentiable Distortions

DNN-based watermarking methods have rapidly advanced, with the ``Encoder-Noise Layer-Decoder'' (END) framework being the most widely used. To ensure end-to-end training, the noise layer in the framework must be differentiable. However, real-world distortions are often non-differentiable, leading to challenges in end-to-end training. Existing solutions only treat the distortion perturbation as additive noise, which does not fully integrate the effect of distortion in training. To better incorporate non-differentiable distortions into training, we propose a novel dual-decoder architecture (END$^2$). Unlike conventional END architecture, our method employs two structurally identical decoders: the Teacher Decoder, processing pure watermarked images, and the Student Decoder, handling distortion-perturbed images. The gradient is backpropagated only through the Teacher Decoder branch to optimize the encoder thus bypassing the problem of non-differentiability. To ensure resistance to arbitrary distortions, we enforce alignment of the two decoders' feature representations by maximizing the cosine similarity between their intermediate vectors on a hypersphere. Extensive experiments demonstrate that our scheme outperforms state-of-the-art algorithms under various non-differentiable distortions. Moreover, even without the differentiability constraint, our method surpasses baselines with a differentiable noise layer. Our approach is effective and easily implementable across all END architectures, enhancing practicality and generalizability.

cs.CV↗

arXiv2024

Measurement of gas properties for the ion-TPC of N$\nu$DEx experiment

In the N$\nu$DEx collaboration, a high-pressure gas TPC is being developed to search for the neutrinoless double beta decay. The use of electronegative $\mathrm{^{82}SeF_{6}}$ gas mandates an ion-TPC. The reconstruction of $z$ coordinate is to be realized exploiting the feature of multiple species of charge carriers. As the initial stage of the development, we studied the properties of the $\mathrm{SF_{6}}$ gas, which is non-toxic and has similar molecular structure to $\mathrm{SeF_{6}}$. In the paper we present the measurement of drift velocities and mobilities of the majority and minority negative charge carriers found in $\mathrm{SF_{6}}$ at a pressure of 750 Torr, slightly higher than the local atmospheric pressure. The reduced fields range between 3.0 and 5.5 Td. It was performed using a laser beam to ionize the gas inside a small TPC, with a drift length of 3.7 cm. A customized charge sensitive amplifier was developed to read out the anode signals induced by the slowly drifting ions. The reconstruction of $z$ coordinate using the difference in the velocities of the two carriers was also demonstrated.

physics.ins-det↗

arXiv2024

Picking watermarks from noise (PWFN): an improved robust watermarking model against intensive distortions

Digital watermarking is the process of embedding secret information by altering images in an undetectable way to the human eye. To increase the robustness of the model, many deep learning-based watermarking methods use the encoder-noise-decoder architecture by adding different noises to the noise layer. The decoder then extracts the watermarked information from the distorted image. However, this method can only resist weak noise attacks. To improve the robustness of the decoder against stronger noise, this paper proposes to introduce a denoise module between the noise layer and the decoder. The module aims to reduce noise and recover some of the information lost caused by distortion. Additionally, the paper introduces the SE module to fuse the watermarking information pixel-wise and channel dimensions-wise, improving the encoder's efficiency. Experimental results show that our proposed method is comparable to existing models and outperforms state-of-the-art under different noise intensities. In addition, ablation experiments show the superiority of our proposed module.

cs.MM↗

arXiv2024

DBDH: A Dual-Branch Dual-Head Neural Network for Invisible Embedded Regions Localization

Embedding invisible hyperlinks or hidden codes in images to replace QR codes has become a hot topic recently. This technology requires first localizing the embedded region in the captured photos before decoding. Existing methods that train models to find the invisible embedded region struggle to obtain accurate localization results, leading to degraded decoding accuracy. This limitation is primarily because the CNN network is sensitive to low-frequency signals, while the embedded signal is typically in the high-frequency form. Based on this, this paper proposes a Dual-Branch Dual-Head (DBDH) neural network tailored for the precise localization of invisible embedded regions. Specifically, DBDH uses a low-level texture branch containing 62 high-pass filters to capture the high-frequency signals induced by embedding. A high-level context branch is used to extract discriminative features between the embedded and normal regions. DBDH employs a detection head to directly detect the four vertices of the embedding region. In addition, we introduce an extra segmentation head to segment the mask of the embedding region during training. The segmentation head provides pixel-level supervision for model learning, facilitating better learning of the embedded signals. Based on two state-of-the-art invisible offline-to-online messaging methods, we construct two datasets and augmentation strategies for training and testing localization models. Extensive experiments demonstrate the superior performance of the proposed DBDH over existing methods.

cs.CV↗

arXiv2024

SSyncOA: Self-synchronizing Object-aligned Watermarking to Resist Cropping-paste Attacks

Modern image processing tools have made it easy for attackers to crop the region or object of interest in images and paste it into other images. The challenge this cropping-paste attack poses to the watermarking technology is that it breaks the synchronization of the image watermark, introducing multiple superimposed desynchronization distortions, such as rotation, scaling, and translation. However, current watermarking methods can only resist a single type of desynchronization and cannot be applied to protect the object's copyright under the cropping-paste attack. With the finding that the key to resisting the cropping-paste attack lies in robust features of the object to protect, this paper proposes a self-synchronizing object-aligned watermarking method, called SSyncOA. Specifically, we first constrain the watermarked region to be aligned with the protected object, and then synchronize the watermark's translation, rotation, and scaling distortions by normalizing the object invariant features, i.e., its centroid, principal orientation, and minimum bounding square, respectively. To make the watermark embedded in the protected object, we introduce the object-aligned watermarking model, which incorporates the real cropping-paste attack into the encoder-noise layer-decoder pipeline and is optimized end-to-end. Besides, we illustrate the effect of different desynchronization distortions on the watermark training, which confirms the necessity of the self-synchronization process. Extensive experiments demonstrate the superiority of our method over other SOTAs.

cs.CV↗

arXiv2022

A gate-programmable van der Waals metal-ferroelectric-semiconductor memory

Ferroelecticity, one of the keys to realize nonvolatile memories owing to the remanent electric polarization, has been an emerging phenomenon in the two-dimensional (2D) limit. Yet the demonstrations of van der Waals (vdW) memories using 2D ferroelectric materials as an ingredient are very limited. Especially, gate-tunable ferroelectric vdW memristive device, which holds promises in future neuromorphic applications, remains challenging. Here, we show a prototype gate-programmable memory by vertically assembling graphite, CuInP2S6, and MoS2 layers into a metal-ferroelectric-semiconductor architecture. The resulted devices exhibit two-terminal switchable electro-resistance with on-off ratios exceeding 105 and long-term retention, akin to a conventional memristor but strongly coupled to the ferroelectric characteristics of the CuInP2S6 layer. By controlling the top gate, Fermi level of MoS2 can be set inside (outside) of its band gap to quench (enable) the memristive behaviour, yielding a three-terminal gate programmable nonvolatile vdW memory. Our findings pave the way for the engineering of ferroelectric-mediated memories in future implementations of nanoelectronics.

cond-mat.mtrl-sci↗

arXiv2022

Topmetal-M: a novel pixel sensor for compact tracking applications

The Topmetal-M is a large area pixel sensor (18 mm * 23 mm) prototype fabricated in a new 130 nm high-resistivity CMOS process in 2019. It contains 400 rows * 512 columns square pixels with the pitch of 40 μm. In Topmetal-M, a novel charge collection method combing the Monolithic Active Pixel Sensor (MAPS) and the Topmetal sensor has been proposed for the first time. Both the ionized charge deposited by the particle in the sensor and along the track over the sensor can be collected. The in-pixel circuit mainly consists of a low-noise charge sensitive amplifier to establish the signal for the energy reconstruction, and a discriminator with a Time-to-Amplitude Converter (TAC) for the Time of Arrival (TOA) measurement. With this mechanism, the trajectory, particle hit position, energy and arrival time of the particle can be measured. The analog signal from each pixel is accessible through time-shared multiplexing over the entire pixel array. This paper will discuss the design and preliminary test results of the Topmetal-M sensor.

physics.ins-det↗

arXiv2020

Development of readout electronics a novel beam monitoring system for ion research facility accelerator

This article presents the readout electronics of a novel beam monitoring system for ion research facility accelerator. The readout electronics are divided into Front-end Card (FEC) and Readout Control Unit (RCU). FEC uses Topmetal II minus to processes the energy of the hitting particles and convert it into a voltage signal. The main function of RCU is to digitize the analog output signal of FEC and format the raw data. On the other hand, the RCU also processes the control commands from the host and distributes the commands according to the mapping. The readout electronic has been characterized and calibrated in the laboratory, and have been installed with the detector. Implementation and testing of readout electronics have been discussed.

physics.ins-det↗