arXiv subjects

Chenjia Tang

Publications and source records attributed to Chenjia Tang.

13 recordsLinked to original sources

arXiv2025

Shubnikov-de Haas quantum oscillations with large spin splitting in highmobility Al0.8Ga0.2Sb/InAs/ Al0.8Ga0.2Sb quantum-well heterostructures

We report the epitaxial growth of high-quality Al0.8Ga0.2Sb-InAs-Al0.8Ga0.2Sb quantum well films featured by high carrier mobility and strong spin-orbit coupling. By appropriately optimizing the Al-to-Ga ratio in the AlGaSb barrier layer, the quantum confinement of the heterostructure is significantlyenhanced, which results in both an ultra-high electron mobility of 924000 cm2/Vs and a giant magnetoresistance ratio of 365000 at low temperatures. Meanwhile, pronounced Shubnikov-deHaas quantum oscillations persist up to 30 K, and their single-frequency feature indicates a well defined Fermi surface without subband mixing in the two-dimensional electron gas channel. Moreover, the large effective g-factor of 12.93 leads to the observation of Zeeman splitting at large magnetic fields. Our results validate the AlGaSb/InAs quantum well heterostructures as a suitable candidate for constructing energy-efficient topological spintronic devices.

cond-mat.mes-hall↗

arXiv2024

Tunable interfacial Rashba spin-orbit coupling in asymmetric Al$_x$In$_{1-x}$Sb/InSb/CdTe quantum well heterostructures

The manipulation of Rashba-type spin-orbit coupling (SOC) in molecular beam epitaxy-grown Al$_x$In$_{1-x}$Sb/InSb/CdTe quantum well heterostructures is reported. The effective band bending provides robust two-dimensional quantum confinement, while the unidirectional built-in electric field from the asymmetric hetero-interfaces results in pronounced Rashba SOC strength. By tuning the Al concentration in the top Al$_x$In$_{1-x}$Sb barrier layer, the optimal structure with $x = 0.15$ shows the largest Rashba coefficient of 0.23 eV-Angstrom. and the highest low-temperature electron mobility of 4400 cm$^2$/Vs . Quantitative investigations of the weak anti-localization effect further confirm the dominant D'yakonov-Perel (DP) spin relaxation mechanism during charge-to-spin conversion. These findings highlight the significance of quantum well engineering in shaping magneto-resistance responses, and narrow bandgap semiconductor-based heterostructures may offer a reliable platform for energy-efficient spintronic applications.

cond-mat.mtrl-sci↗

arXiv2023

Interplay between moment-dependent and field-driven unidirectional magnetoresistance in CoFeB/InSb/CdTe heterostructures

Magnetoresistance effects are crucial for understanding the charge/spin transport as well as propelling the advancement of spintronic applications. Here we report the coexistence of magnetic moment-dependent (MD) and magnetic field-driven (FD) unidirectional magnetoresistance (UMR) effects in CoFeB/InSb/CdTe heterostructures. The strong spin-orbital coupling of InSb and the matched impedance at the CoFeB/InSb interface warrant a distinct MD-UMR effect at room temperature, while the interaction between the in-plane magnetic field and the Rashba effect at the InSb/CdTe interface induces the marked FD-UMR signal that dominates the high-field region. Moreover, owning to the different spin transport mechanisms, these two types of nonreciprocal charge transport show opposite polarities with respect to the magnetic field direction, which further enable an effective phase modulation of the angular-dependent magnetoresistance. Besides, the demonstrations of both the tunable UMR response and two-terminal spin-orbit torque-driven magnetization switching validate our CoFeB/InSb/CdTe system as a suitable integrated building block for multifunctional spintronic device design.

physics.app-ph↗

arXiv2022

Room Temperature Gate Tunable Non Reciprocal Charge Transport in Lattice Matched InSb/CdTe Heterostructures

The manipulation of symmetry provides an effective way to tailor the physical orders in solid-state systems. With the breaking of both the inversion and time-reversal symmetries, non-reciprocal magneto-transport may emerge in assorted non-magnetic systems to enrich spintronic physics. Here, we report the observation of the uni-directional magneto-resistance (UMR) in the lattice-matched InSb/CdTe film up to room temperature. Benefiting from the strong built-in electric field of $0.13 \mathrm{~V} \cdot \mathrm{nm}^{-1}$ in the hetero-junction region, the resulting Rashba-type spin-orbit coupling and quantum confinement warrant stable angular-dependent second-order charge current with the non-reciprocal coefficient 1-2 orders of magnitude larger than most non-centrosymmetric materials at 298 K. More importantly, this heterostructure configuration enables highly-efficient gate tuning of the rectification response in which the enhancement of the UMR amplitude by 40% is realized. Our results advocate the narrow-gap semiconductor-based hybrid system with the robust two-dimensional interfacial spin texture as a suitable platform for the pursuit of controllable chiral spin-orbit devices and applications.

cond-mat.mes-hall↗

arXiv2020

Origin of the Electronic Structure in Single-Layer FeSe/SrTiO3 Films

The accurate theoretical description of the underlying electronic structures is essential for understanding the superconducting mechanism of iron-based superconductors. Compared to bulk FeSe, the superconducting single-layer FeSe/SrTiO3 films exhibit a distinct electronic structure consisting of only electron Fermi pockets, due to the formation of a new band gap at the Brillouin zone (BZ) corners and an indirect band gap between the BZ center and corners. Although intensive studies have been carried out, the origin of such a distinct electronic structure and its connection to bulk FeSe remain unclear. Here we report a systematic study on the temperature evolution of the electronic structure in single-layer FeSe/SrTiO3 films by angle-resolved photoemission spectroscopy. A temperature-induced electronic phase transition was clearly observed at 200 K, above which the electronic structure of single-layer FeSe/SrTiO3 films restored to that of bulk FeSe, characterized by the closing of the new band gap and the vanishing of the indirect band gap. Moreover, the interfacial charge transfer effect induced band shift of ~ 60 meV was determined for the first time. These observations not only show the first direct evidence that the electronic structure of single-layer FeSe/SrTiO3 films originates from bulk FeSe through a combined effect of an electronic phase transition and an interfacial charge transfer, but also provide a quantitative basis for theoretical models in describing the electronic structure and understanding the superconducting mechanism in single-layer FeSe/SrTiO3 films.

cond-mat.supr-con↗

arXiv2017

An extensive impurity-scattering study on the pairing symmetry of monolayer FeSe films on SrTiO3

Determination of the pairing symmetry in monolayer FeSe films on SrTiO3 is a requisite for understanding the high superconducting transition temperature in this system, which has attracted intense theoretical and experimental studies but remains controversial. Here, by introducing several types of point defects in FeSe monolayer films, we conduct a systematic investigation on the impurity-induced electronic states by spatially resolved scanning tunneling spectroscopy. Ranging from surface adsorption, chemical substitution to intrinsic structural modification, these defects generate a variety of scattering strength, which renders new insights on the pairing symmetry.

cond-mat.supr-con↗

arXiv2016

Interface induced high temperature superconductivity in single unit-cell FeSe films on SrTiO3(110)

We report high temperature superconductivity in one unit-cell (1-UC) FeSe films grown on STO(110) substrate by molecular beam epitaxy. By in-situ scanning tunneling spectroscopy measurement, we observed a superconducting gap as large as 17 meV. Transport measurements on 1-UC FeSe/STO(110) capped with FeTe layers reveal superconductivity with an onset TC of 31.6 K and an upper critical magnetic field of 30.2 T. We also find that the TC can be further increased by an external electric field, but the effect is smaller than that on STO(001) substrate. The study points out the important roles of interface related charge transfer and electron-phonon coupling in the high temperature superconductivity of FeSe/STO.

cond-mat.supr-con↗

arXiv2015

Atomically Resolved FeSe/SrTiO3(001) Interface Structure by Scanning Transmission Electron Microscopy

Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe films on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. By combined in-situ scanning tunneling microscopy/spectroscopy (STM/STS) and ex-situ scanning transmission electron microscopy (STEM) studies, we report on atomically resolved structure including both lattice constants and actual atomic positions of the FeSe/STO interface under both non-superconducting and superconducting states. We observed TiO2 double layers (DLs) and significant atomic displacements in the top two layers of STO, lattice compression of the Se-Fe-Se triple layer, and relative shift between bottom Se and topmost Ti atoms. By imaging the interface structures under various superconducting states, we unveil a close correlation between interface structure and superconductivity. Our atomic-scale identification of FeSe/STO interface structure provides useful information on investigating the pairing mechanism of this interface-enhanced high-temperature superconducting system.

cond-mat.supr-con↗

arXiv2015

Superconductivity dichotomy in K-coated single and double unit cell FeSe films on SrTiO3

We report the superconductivity evolution of one unit cell (1-UC) and 2-UC FeSe films on SrTiO3(001) substrates with potassium (K) adsorption. By in situ scanning tunneling spectroscopy measurement, we find that the superconductivity in 1-UC FeSe films is continuously suppressed with increasing K coverage, whereas non-superconducting 2-UC FeSe films become superconducting with a gap of ~17 meV or ~11 meV depending on whether the underlying 1-UC films are superconducting or not. This work explicitly reveals that the interface electron-phonon coupling is strongly related to the charge transfer at FeSe/STO interface and plays vital role in enhancing Cooper pairing in both 1-UC and 2-UC FeSe films.

cond-mat.supr-con↗

arXiv2015

Interface enhanced electron-phonon coupling and high temperature superconductivity in potassium-coated ultra-thin FeSe films on SrTiO3

Alkali-metal (potassium) adsorption on FeSe thin films with thickness from two unit cells (UC) to 4-UC on SrTiO3 grown by molecular beam epitaxy is investigated with a low-temperature scanning tunneling microscope. At appropriate potassium coverage (0.2-0.3 monolayer), the tunneling spectra of the films all exhibit a superconducting-like gap larger than 11 meV (five times the gap value of bulk FeSe), and two distinct features of characteristic phonon modes at 11 meV and 21 meV. The results reveal the critical role of the interface enhanced electron-phonon coupling for possible high temperature superconductivity in the system and is consistent with recent theories. Our study provides compelling evidence for the conventional pairing mechanism for this type of heterostructure superconducting systems.

cond-mat.supr-con↗

arXiv2014

Dichotomy of Electronic Structure and Superconductivity between Single-Layer and Double-Layer FeSe/SrTiO3 Films

The latest discovery of possible high temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate, together with the observation of its unique electronic structure and nodeless superconducting gap, has generated much attention. Initial work also found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer FeSe/SrTiO3 film shows an insulating behavior. Such a dramatic difference between the single-layer and double-layer FeSe/SrTiO3 films is surprising and the underlying origin remains unclear. Here we report our comparative study between the single-layer and double-layer FeSe/SrTiO3 films by performing a systematic angle-resolved photoemission study on the samples annealed in vacuum. We find that, like the single-layer FeSe/SrTiO3 film, the as-prepared double-layer FeSe/SrTiO3 film is insulating and possibly magnetic, thus establishing a universal existence of the magnetic phase in the FeSe/SrTiO3 films. In particular, the double-layer FeSe/SrTiO3 film shows a quite different doping behavior from the single-layer film in that it is hard to get doped and remains in the insulating state under an extensive annealing condition. The difference originates from the much reduced doping efficiency in the bottom FeSe layer of the double-layer FeSe/SrTiO3 film from the FeSe-SrTiO3 interface. These observations provide key insights in understanding the origin of superconductivity and the doping mechanism in the FeSe/SrTiO3 films. The property disparity between the single-layer and double-layer FeSe/SrTiO3 films may facilitate to fabricate electronic devices by making superconducting and insulating components on the same substrate under the same condition.

cond-mat.supr-con↗

arXiv2014

Electronic Evidence of an Insulator-Superconductor Transition in Single-Layer FeSe/SrTiO3 Films

In high temperature cuprate superconductors, it is now generally agreed that the parent compound is a Mott insulator and superconductivity is realized by doping the antiferromagnetic Mott insulator. In the iron-based superconductors, however, the parent compound is mostly antiferromagnetic metal, raising a debate on whether an appropriate starting point should go with an itinerant picture or a localized picture. It has been proposed theoretically that the parent compound of the iron-based superconductors may be on the verge of a Mott insulator, but so far no clear experimental evidence of doping-induced Mott transition has been available. Here we report an electronic evidence of an insulator-superconductor transition observed in the single-layer FeSe films grown on the SrTiO3 substrate. By taking angle-resolved photoemission measurements on the electronic structure and energy gap, we have identified a clear evolution of an insulator to a superconductor with the increasing doping. This observation represents the first example of an insulator-superconductor transition via doping observed in the iron-based superconductors. It indicates that the parent compound of the iron-based superconductors is in proximity of a Mott insulator and strong electron correlation should be considered in describing the iron-based superconductors.

cond-mat.supr-con↗

arXiv2013

Direct observation of high temperature superconductivity in one-unit-cell FeSe films

Heterostructure based interface engineering has been proved an effective method for finding new superconducting systems and raising superconductivity transition temperature (TC). In previous work on one unit-cell (UC) thick FeSe films on SrTiO3 (STO) substrate, a superconducting-like energy gap as large as 20 meV, was revealed by in situ scanning tunneling microscopy/spectroscopy (STM/STS). Angle resolved photoemission spectroscopy (ARPES) further revealed a nearly isotropic gap of above 15 meV, which closes at a temperature of ~ 65 K. If this transition is indeed the superconducting transition, then the 1-UC FeSe represents the thinnest high TC superconductor discovered so far. However, up to date direct transport measurement of the 1-UC FeSe films has not been reported, mainly because growth of large scale 1-UC FeSe films is challenging and the 1-UC FeSe films are too thin to survive in atmosphere. In this work, we successfully prepared 1-UC FeSe films on insulating STO substrates with non-superconducting FeTe protection layers. By direct transport and magnetic measurements, we provide definitive evidence for high temperature superconductivity in the 1-UC FeSe films with an onset TC above 40 K and a extremely large critical current density JC ~ 1.7*106 A/cm2 at 2 K. Our work may pave the way to enhancing and tailoring superconductivity by interface engineering.

cond-mat.supr-con↗