arXiv subjects

Chenyang Cui

Publications and source records attributed to Chenyang Cui.

14 recordsLinked to original sources

arXiv2026

Quantum speed limits based on quantifiers of quantum-state texture

Quantum speed limits impose intrinsic lower bounds on the shortest time scale for quantum system evolution. As an emerging paradigm in quantum resource theory, quantum-state texture has attracted research interest amid the rapid advancement of quantum theory. Herein, we investigate the interplay between quantum speed limits and quantum-state texture via several canonical quantifiers, including trace distance, state rugosity and Jensen-Shannon divergence. To demonstrate our findings, we analyze the minimum evolution time of physical systems subject to dephasing and dissipative dynamics. For the Jensen-Shannon divergence, we further explore nonunitary dynamics described by completely positive and trace-preserving maps, taking the amplitude damping channel as a typical example. In addition, we explore the tightness of these bounds in the considered dynamical models. Our results reveal that quantum speed limits derived from quantum-state texture capture the fundamental constraints on quantum evolutionary speed, with promising applications in quantum computing, quantum control and quantum metrology.

quant-ph↗

arXiv2026

Quantum-state block texture and its quantification

Quantum-state texture (QST) is an emerging quantum resource that has garnered increasing attention amid advances in quantum theory. In this work, we generalize the QST to quantum-state block texture (QSBT). This generalization provides profound operational interpretations for quantifying the advantages of quantum states in quantum information processing. We pioneer an alternative framework for characterizing and quantifying quantum-state block texture, and propose three types of block texture measures. By comparing these QSBT measures, we investigate their distinctions and interrelationships. We demonstrate that the geometric measure serves as an upper bound for the trace distance-based measure. For a specific family of quantum states, we evaluate the values of two trace distance-based measures. Then we sample four sets of data from this family of states, with each set comprising $5\times 10^4, 10^5, 5\times 10^5$ and $10^6 $ samples, respectively, and present the corresponding distributions. Our results reveal that the QSBT measures constructed via different approaches show distinct characteristics, indicating their potential roles in quantifying the block texture of quantum states.

quant-ph↗

arXiv2026

Identifying local unitary equivalence based on reduction of quantum states

Local unitary equivalence is central to entanglement quantification and classification. Identifying the local unitary equivalence remains a formidable challenge. We address this problem for a class of quantum states with one highly degenerate eigenvalue and the rest non-degenerate simple eigenvalues that are pivotal to structured resources in quantum resource theory. We introduce a ``reduction" procedure that maps each state to a ``reduced state" by nullifying the highest-multiplicity eigenvalue and prove that the local unitary equivalence of the original states is equivalent to that of their reduced counterparts. For the resulting pure or non-degenerate reduced states, we employ the existing invariants or fixed-point subgroup criteria to establish a complete discrimination framework, although the existing criteria can not directly identify the local unitary equivalence of the original states. We also verify the local unitary equivalence of two families of single-parameterized multipartite mixed states constructed by perturbing absolutely maximally entangled states from distinct combinatorial origins, demonstrating the efficacy and generality of our approach.

quant-ph↗

arXiv2026

Final assessment of radioactive impurities in the JUNO detector

The Jiangmen Underground Neutrino Observatory (JUNO) collaboration has completed the construction of the 20,000-ton liquid scintillator detector and the associated muon veto detector system. To meet the physics objectives, the materials used in the detector must exhibit low radioactive contamination. The single-event rate in the fiducial volume (R $<$ 17.2 m) of the scintillator is required to be approximately 7 Hz for energies above 0.7 MeV, resulting in an accidental coincidence background of about 1 event per day for reactor neutrino physics analyses. Since the beginning of the construction phase, we have screened the natural radioactivity content of thousands of materials, to select those that meet the design background budget. The radioactive impurity concentrations of the materials ultimately used in the JUNO detector are summarized in this paper. The construction of the entire detector and the subsequent filling of the liquid scintillator were completed in August 2025. From the initial data, the total count rate of natural radioactivity within the detector's fiducial volume has met the requirements and is sufficient to support the reactor antineutrino analysis.

physics.ins-det↗

arXiv2026

A Low-energy Threshold and Multi-messenger Trigger System for the JUNO Experiment

The Jiangmen Underground Neutrino Observatory (JUNO) is a 20-kiloton liquid scintillator neutrino detector, located 650 meters (1800 m.w.e.) underground in Jiangmen, Guangdong, China. JUNO is primarily designed for reactor neutrino measurements and has been taking data since 2025. With the largest mass of its kind and an excellent energy resolution, JUNO is a leading observatory for high-precision measurements of MeV neutrinos. The standard global trigger system serves as the primary trigger for JUNO. We present a newly developed multi-messenger trigger system that extends the capabilities of the global trigger by providing a lower energy threshold and an independent monitoring capability. During the 2025 operation, it achieved an effective energy threshold of approximately 110 +/- 10 keV, providing a lower threshold configuration suitable for low-energy event analysis. The system shows the potential to further reduce the threshold to well below 100 keV. Based on the multi-messenger trigger system, an astrophysical monitor has been developed to receive and process external alerts from other messengers, such as gravitational-wave observations. A Transient Neutrino Burst Monitor is integrated to detect short-time-scale neutrino burst events and enables real-time monitoring of transient astrophysical phenomena. The system is sensitive to neutrino bursts from core-collapse supernovae within a distance of about 250 kpc.

hep-ex↗

arXiv2026

Embedded underwater front-end electronics for the 3-inch photomultipliers in the JUNO experiment

The Jiangmen Underground Neutrino Observatory (JUNO) is a 20-kton liquid scintillator-based, low-radioactivity, multi-purpose neutrino detector located 693 meters (1800 m.w.e.) underground in the Guangdong province, China. To detect scintillation light produced in the target, the detector is equipped with 17,612 20-inch photomultipliers (PMTs), forming the Large PMT system (LPMT). In addition, 25,600 3-inch photomultipliers (the Small Photomultiplier System or SPMT) are deployed in the gaps between the LPMTs. This paper presents the design and performance of the underwater front-end electronics developed for the SPMT system. It details the individual electronics boards and their key components, the inter-board interfaces, the system-level design, and the firmware architecture that supports data acquisition and control. It also outlines mechanical and thermal integration, board validation procedures, and system performance metrics. The readout chain includes digitization of 128 PMT channels per unit, synchronized time-stamping, charge measurement, event packaging, and bandwidth management. Comprehensive validation confirms the system's readiness to meet JUNO's stringent physics goals. The underwater electronics achieve noise levels as low as 0.04 photoelectrons with minimal crosstalk (below 0.4%) and a bandwidth of 57 MB/s, ensuring reliable single photo-electron detection and operation under high-rate conditions. The SPMT system has now been fully integrated and installed in JUNO. Its commissioning and physics performance will be reported in a future publication.

physics.ins-det↗

arXiv2025

Prospects for geoneutrino detection with JUNO

Geoneutrinos, which are antineutrinos emitted during the decay of long-lived radioactive elements inside Earth, serve as a unique tool for studying the composition and heat budget of our planet. The Jiangmen Underground Neutrino Observatory (JUNO) experiment in China, which has recently completed construction, is expected to collect a sample comparable in size to the entire existing world geoneutrino dataset in less than a year. This paper presents an updated estimation of sensitivity to geoneutrinos of JUNO using the best knowledge available to date about the experimental site, the surrounding nuclear reactors, the detector response uncertainties, and the constraints expected from the TAO satellite detector. To facilitate comparison with present and future geological models, our results cover a wide range of predicted signal strengths. Despite the significant background from reactor antineutrinos, the experiment will measure the total geoneutrino flux with a precision comparable to that of existing experiments within its first few years, ultimately achieving a world-leading precision of about 8% over ten years. The large statistics of JUNO will also allow separation of the Uranium-238 and Thorium-232 contributions with unprecedented precision, providing crucial constraints on models of formation and composition of Earth. Observation of the mantle signal above the lithospheric flux will be possible but challenging. For models with the highest predicted mantle concentrations of heat-producing elements, a 3-sigma detection over six years requires knowledge of the lithospheric flux to within 15%. Together with complementary measurements from other locations, the geoneutrino results of JUNO will offer cutting-edge, high-precision insights into the interior of Earth, of fundamental importance to both the geoscience and neutrino physics communities.

hep-ex↗

arXiv2025

Design, waterproofing, and mass production of the 3-inch PMT frontend system of JUNO

Over 25,600 3-inch photomultiplier tubes (PMTs) have been instrumented for the central detector of the Jiangmen Underground Neutrino Observatory. Each PMT is equipped with a high-voltage divider and a frontend cable with waterproof sealing. Groups of sixteen PMTs are connected to the underwater frontend readout electronics via specialized multi-channel waterproof connectors. This paper outlines the design and mass production processes for the high-voltage divider, the cable and connector, as well as the waterproof potting of the PMT bases. The results of the acceptance tests of all the integrated PMTs are also presented.

physics.ins-det↗

arXiv2025

Quantitative U/Th deposition and cleanliness control strategies in the JUNO site air

The Jiangmen Underground Neutrino Observatory (JUNO) employs a 20 kt liquid scintillator (LS) detector located 700 m underground. To meet its physics objectives, the LS must achieve an ultra-low $^{238}$U/$^{232}$Th content of 10$^{-17}$ g/g. Given that airborne dust exhibits radioactivity about 12 orders of magnitude higher, exceptional cleanliness is essential during on-site installation. The total permissible dust mass in the 20 kt LS is only about 8 mg. To attain this, the acrylic vessel interior must comply with class 1,000 cleanliness. Pre-filling water spray cleaning improves cleanliness by roughly two orders of magnitude, requiring the overall environment to be maintained between class 10,000 and 100,000. At JUNO, a cleanroom management system has been implemented across the 120,000 m$^3$ underground experimental hall. Since May 2022, continuous laser particle monitoring has consistently achieved an average cleanliness class of 74,000. Furthermore, we developed a method to directly measure $^{238}$U/$^{232}$Th deposition rates on detector surfaces. Using ICP-MS, sensitivity reaches sub-ppt levels ($<$10$^{-12}$ g/g), enabling effective cleanliness control and assessment of external contamination during detector construction.

physics.ins-det↗

arXiv2025

Simulation of the Background from $^{13}$C$(\alpha, n)^{16}$O Reaction in the JUNO Scintillator

Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($\alpha, n$) reactions. In organic liquid scintillator detectors, $\alpha$ particles emitted from intrinsic contaminants such as $^{238}$U, $^{232}$Th, and $^{210}$Pb/$^{210}$Po, can be captured on $^{13}$C nuclei, followed by the emission of a MeV-scale neutron. Three distinct interaction mechanisms can produce prompt energy depositions preceding the delayed neutron capture, leading to a pair of events correlated in space and time within the detector. Thus, ($\alpha, n$) reactions represent an indistinguishable background in liquid scintillator-based antineutrino detectors, where their expected rate and energy spectrum are typically evaluated via Monte Carlo simulations. This work presents results from the open-source SaG4n software, used to calculate the expected energy depositions from the neutron and any associated de-excitation products. Also simulated is a detailed detector response to these interactions, using a dedicated Geant4-based simulation software from the JUNO experiment. An expected measurable $^{13}$C$(\alpha, n)^{16}$O event rate and reconstructed prompt energy spectrum with associated uncertainties, are presented in the context of JUNO, however, the methods and results are applicable and relevant to other organic liquid scintillator neutrino detectors.

physics.ins-det↗

arXiv2024

JUNO Sensitivity to Invisible Decay Modes of Neutrons

We explore the decay of bound neutrons into invisible particles (e.g., $n\rightarrow 3 \nu$ or $nn \rightarrow 2 \nu$) in the JUNO liquid scintillator detector, which do not produce an observable signal. The invisible decay includes two decay modes: $ n \rightarrow { inv} $ and $ nn \rightarrow { inv} $. The invisible decays of $s$-shell neutrons in $^{12}{\rm C}$ will leave a highly excited residual nucleus. Subsequently, some de-excitation modes of the excited residual nuclei can produce a time- and space-correlated triple coincidence signal in the JUNO detector. Based on a full Monte Carlo simulation informed with the latest available data, we estimate all backgrounds, including inverse beta decay events of the reactor antineutrino $\bar{\nu}_e$, natural radioactivity, cosmogenic isotopes and neutral current interactions of atmospheric neutrinos. Pulse shape discrimination and multivariate analysis techniques are employed to further suppress backgrounds. With two years of exposure, JUNO is expected to give an order of magnitude improvement compared to the current best limits. After 10 years of data taking, the JUNO expected sensitivities at a 90% confidence level are $\tau/B( n \rightarrow { inv} ) > 5.0 \times 10^{31} \, {\rm yr}$ and $\tau/B( nn \rightarrow { inv} ) > 1.4 \times 10^{32} \, {\rm yr}$.

hep-ex↗

arXiv2024

Prediction of Energy Resolution in the JUNO Experiment

This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components of the JUNO detector. Various factors affecting the detection of inverse beta decay signals have an impact on the energy resolution, extending beyond the statistical fluctuations of the detected number of photons, such as the properties of the liquid scintillator, performance of photomultiplier tubes, and the energy reconstruction algorithm. To account for these effects, a full JUNO simulation and reconstruction approach is employed. This enables the modeling of all relevant effects and the evaluation of associated inputs to accurately estimate the energy resolution. The results of study reveal an energy resolution of 2.95\% at 1~MeV. Furthermore, this study assesses the contribution of major effects to the overall energy resolution budget. This analysis serves as a reference for interpreting future measurements of energy resolution during JUNO data collection. Moreover, it provides a guideline for comprehending the energy resolution characteristics of liquid scintillator-based detectors.

hep-ex↗

arXiv2024

Sliding ferroelectric memories and synapses

Ferroelectric materials with switchable electric polarization hold great promise for a plethora of emergent applications, such as post-Moore's law nanoelectronics, beyond-Boltzmann transistors, non-volatile memories, and above-bandgap photovoltaic devices. Recent advances have uncovered an exotic sliding ferroelectric mechanism, which endows to design atomically thin ferroelectrics from non-ferroelectric parent monolayers. Although notable progress has been witnessed in understanding its fundamental properties, functional devices based on sliding ferroelectrics, the key touchstone toward applications, remain elusive. Here, we demonstrate the rewritable, non-volatile memory devices at room-temperature utilizing a two-dimensional (2D) sliding ferroelectric semiconductor of rhombohedral-stacked bilayer molybdenum disulfide. The 2D sliding ferroelectric memories (SFeMs) show superior performances with a large memory window of >8V, a high conductance ratio of above 106, a long retention time of >10 years, and a programming endurance greater than 104 cycles. Remarkably, flexible SFeMs are achieved with state-of-the-art performances competitive to their rigid counterparts and maintain their performances post bending over 103 cycles. Furthermore, synapse-specific Hebbian forms of plasticity and image recognition with a high accuracy of 97.81% are demonstrated based on flexible SFeMs. Our work demonstrates the sliding ferroelectric memories and synaptic plasticity on both rigid and flexible substrates, highlighting the great potential of sliding ferroelectrics for emerging technological applications in brain-inspired in-memory computing, edge intelligence and energy-efficient wearable electronics.

cond-mat.mes-hall↗

arXiv2023

Environmental radon control in the 700-m underground laboratory at JUNO

The Jiangmen Underground Neutrino Observatory is building the world's largest liquid scintillator detector with a 20 kt target mass and about 700 m overburden. The total underground space of civil construction is about 300,000 m$^3$ with the main hall volume of about 120,000 m$^3$, which is the biggest laboratory in the world. Radon concentration in the underground air is quite important for not only human beings' health but also the background of experiments with rare decay detection, such as neutrino and dark matter experiments. The radon concentration is the main hall is required to be around 100 Bq/m$^3$. Optimization of the ventilation with fresh air is effective to control the radon underground. To find the radon sources in the underground laboratory, we made a benchmark experiment in the refuge room near the main hall. The result shows that the radon emanating from underground water is one of the main radon sources in the underground air. The total underground ventilation rate is about 160,000 m$^3$/h fresh air with about 30 Bq/m$^3$ $^{222}$Rn from the bottom of the vertical tunnel after optimization, and 55,000 m$^3$/h is used for the ventilation in the main hall. Finally, the radon concentration inside the main hall decreased from 1600 Bq/m$^3$ to around 100 Bq/m$^3$. The suggested strategies for controlling radon concentration in the underground air are described in this paper.

physics.ins-det↗