arXiv subjects

Chinmoy Nath Saha

Publications and source records attributed to Chinmoy Nath Saha.

11 recordsLinked to original sources

arXiv2026

4 MV/cm (010) $β$-Ga$_2$O$_3$ Heterojunction Diodes Realized by Low-Damage e-Beam NiO$_x$ Interlayers

We report on the utilization of a low-damage e-beam NiO$_x$ deposition process to realize field-plated heterojunction diodes (FP-HJDs) on (010) $β$-Ga$_2$O$_3$ films with high critical breakdown field strengths beyond 4 MV/cm and power figure of merits (PFOM) of >1 GW/cm$^2$. Diodes were fabricated on a 2.67 $\times$ 10$^{16}$ cm$^{-3}$ intentionally doped 6.2 $μ$m thick epitaxial layer grown by metalorganic chemical vapor deposition (MOCVD) on a conductive Sn-doped $β$-Ga$_2$O$_3$ (010) substrate using TMGa, O$_2$, Ar carrier gas, and SiH$_4$ as the silicon dopant source. The mesa etched FP-HJD devices utilized a thin 7 nm e-beam NiO$_x$ interlayer before the sputtered NiO$_x$ layers to eliminate the effects of sputter-induced ion damage on the (010) epilayers. Current-Voltage measurements resulted in a forward current density of 700 A/cm$^2$ at 4 V, HJD ideality factor of 1.29, a V$_{bi}$ of 2 V, rectification ratio of 10$^{11}$, and a differential specific on resistance (R$_{on,sp}$) value of 2.36 m$Ω$ $\times$ cm$^2$. Breakdown of the (010) FP-HJDs was 1.64 kV, leading to a parallel plane electric field at breakdown (E$_{||,max}$) of 4.02 MV/cm and a PFOM of 1.14 GW/cm$^2$, which is a state-of-the-art result for diodes on MOCVD-grown (010) drift layers.

cond-mat.mtrl-sci↗

arXiv2026

Beta-AlGaO/Ga2O3 Tri-Gate MOSHEMT with 70GHz fT and 55GHz fmax

We report Beta-AlGaO/Ga2O3 tri-gate heterostructure MOSHEMTs incorporating a thin 5 nm Al2O3 gate oxide layer for improved gate control and reduced leakage. The devices were fabricated on AlGaO/GaO heterostructures grown by ozone MBE on Fe-doped Ga2O3 (010) substrates. The tri-gate MOSHEMTs, with 1 micron-wide fins and Lg=155 nm, exhibit a peak current-gain cut-off frequency fT=70 GHz and a power-gain cut-off frequency fMAX=55 GHz.The fT.L product of 10.85 GHz-micron is the highest among reported Ga2O3 FETs to date. The devices show Vth =-0.5 V, an on/off ratio 10^6 I=80 mA/mm, a peak gm=60 mS/mm, and a low gate leakage current of 10^(-10) mA/mm at Vgs=0.5 V. Passivation with a 100 nm ALD Al2O3 layer effectively removes DC/RF dispersion and maintains stable operation under pulsed IV and repeated RF measurements. These results demonstrate the potential of tri-gate AlGaO/GaO MOSHEMTs for next-generation high-frequency and high-power applications.

cond-mat.mtrl-sci↗

arXiv2026

VBr >10 kV E-Beam/Sputtered Vertical NiOx/(011) β-Ga2O3 HJDs with PFOM >2.3 GW/cm2

Beta-gallium oxide (β-Ga2O3) holds enormous potential for medium voltage range power electronic applications. This work reports VBr > 10 kV/Ron,sp = 43 mΩ*cm2 class edge terminated vertical heterojunction diodes (HJDs) with e-beam/sputtered nickel oxide (NiOx) stack on epitaxial (011) β-Ga2O3. The power figure of merit (PFOM) of the HJD exceeds 2.3 GW/cm2. The extracted parallel plane breakdown field is > 5.3 MV/cm, which is the highest reported electric field for thick (011) β-Ga2O3 epitaxial drift layer.

physics.app-ph↗

arXiv2026

Evidence of Micron-Scale Ion Damage in (010), (110), and (011) $β-Ga_2O_3$ Epitaxial Layers

We report on the experimental observation of up to 11.5 $μm$ deep charge depletion in (010), (110), and (011) $β-Ga_2O_3$ epitaxial layers due to ion damage from sputtering and inductively coupled plasma (ICP) etching processes whereas charge depletion in (001) $β-Ga_2O_3$ epitaxial layers was minimal. The orientation-dependent reduction in CV-measured charge density was first observed in $NiO_x$ reactively sputtered heterojunction p-n diodes (HJDs). When compared to reference low-damage Schottky barrier diodes (SBDs), the sputtered HJDs showed a $9.4{\times}$ increase in the specific on resistance $(R_{on,sp})$ and 85% reduction in net donor concentration $(N_D - N_A)$ at zero bias for sputter-damaged HJDs on (010) epitaxial layers whereas HJDs on (001) remained unchanged. Similarly, sputtered SiO2 caused a reduction of $N_D - N_A$ 11.5 $μm$ deep into the (010) material. Next, SBDs were fabricated on $β-Ga_2O_3$ surfaces previously etched via a BCl3 based ICP process and compared to SBDs on un-etched surfaces. The (010) SBDs on etched surfaces exhibited a $7.7{\times}$ increase in $R_{on,sp}$ and a 91% reduction in $N_D - N_A$ at zero bias where the (001) etched diodes exhibited little change. Additionally, (110) and (011) diodes fabricated on ICP damaged surfaces also saw a ~82% reduction in $N_D - N_A$ at zero bias, indicating (110) and (011) are also susceptible to ion damage. Damage in the (010), (110), and (011) diodes is potentially caused by energetic ions that travel into the open channels present along the [010] direction and create compensating point defects which could potentially diffuse further.

physics.app-ph↗

arXiv2025

Electrical Stability of Cr2O3/\b{eta}-Ga2O3 and NiOx/\b{eta}-Ga2O3 Heterojunction Diodes

This work reports the electrical characteristics comparison study between Cr2O3 and NiOx based heterojunction diodes (HJD) on halide vapor phase epitaxy (HVPE) grown \b{eta}-Ga2O3 epitaxial layers. Both as-fabricated Cr2O3 and NiOx HJDs exhibited forward current density in a range of 130-150 A/cm^2 at 5 V with rectifying ratios >10^10 and a reverse leakage current density at 10^-8 A/cm^2 at -5 V. The differential specific on-resistance of Cr2O3 and NiOx HJDs was 12.01 mΩ*cm^2 and 12.05 mΩ*cm^2, respectively. Breakdown voltages of Cr2O3 HJDs ranged from 1.4-1.9 kV and 1.5-2.3 kV for NiOx HJDs. Theoretical band alignment between Cr2O3 and \b{eta}-Ga2O3 was calculated from first principles. The ambient exposed NiOx/HVPE \b{eta}-Ga2O3 HJDs forward current density degraded after 10 days while that of Cr2O3/HVPE \b{eta}-Ga2O3 HJDs remained nearly unchanged after the same amount of time. It was later confirmed that the ambient exposed sputtered NiOx sheet resistance (Rsh) degradation gave rise to the reduction of the forward current density of the NiOx based HJDs, and water (H2O) was qualitatively determined to be the agent attributed to the forward conduction degradation by measuring the Rsh of NiOx-on-sapphire reference wafer after exposing it to different environments. The Cr2O3/HVPE \b{eta}-Ga2O3 HJD also exhibited enhanced thermal stability compared to the NiOx/\b{eta}-Ga2O3 heterostructures at elevated temperatures. Interfacial nickel gallate (Ga2NiO4) phase formation expected from phase diagrams can explain the reduced thermal stability of NiOx/\b{eta}-Ga2O3 HJDs. This study indicates that Cr2O3 is a stable p-type oxide for the realization of robust multi-kV \b{eta}-Ga2O3 HJDs.

physics.app-ph↗

arXiv2025

2.34 kV \b{eta}-Ga2O3 Vertical Trench RESURF Schottky Barrier Diode with sub-micron fin width

In this letter, we present a kilovolt-class \b{eta}-Ga2O3 vertical trench Schottky barrier diode with a field plate incorporating narrow fin width (Wfin) structures of sub-micron dimensions. We used a nanolaminate dielectric comprising a stack of multiple thin TiO2 and Al2O3 layers as RESURF dielectric and for field plate edge termination. Both Wfin of 200 nm and 500 nm demonstrate excellent on-state performance with specific on-resistance (Ron,sp) of 9.8-12 mohmcm2, and 10^10 rectification ratio. A self-aligned photoresist planarization and etch-back process was employed to expose the top of the fins for Schottky contact formation, eliminating critical lithographic alignment challenges in sub-micron scale processing. We achieved a breakdown of 2.34 kV with very low leakage currents before catastrophic breakdown. The measured breakdown voltage is limited by dielectric breakdown at the trench bottom corner as verified by metal-oxide-semiconductor (MOS) test structure. TCAD simulation shows a reduced electric field at the surface of the metal-semiconductor junction due to the RESURF effect, resulting in very low reverse leakage before breakdown. The parallel plane electric field in the \b{eta} -Ga2O3 is extracted to be 3.8 MV/cm from TCAD simulations using accurately extracted drift layer doping profile from high voltage CV measurements. A power figure of merit of 0.867 GW/cm2(0.56 GW/cm2 with current spreading) was calculated. Enhanced RESURF by integration of high-k dielectrics with self-aligned photoresist planarization, offers a promising pathway towards high figure of merit, low leakage high-performance vertical devices.

physics.app-ph↗

arXiv2025

Kilovolt-Class $β-Ga_2O_3$ Field-Plated Schottky Barrier Diodes with MOCVD-Grown Intentionally $10^{15}$ $cm^{-3}$ Doped Drift Layers

We report on the growth optimization of intentionally low-doped ($10^{15}$ $cm^{-3}$) high-quality $β-Ga_2O_3$ drift layers up to 10 $μm$ thick via MOCVD and the fabrication of kilovolt-class field plated Schottky barrier diodes on these thick drift layers. Homoepitaxial growth was performed on (010) $10^{15}$ $cm^{-3}$ substrates using TMGa as the Ga precursor. Growth parameters were systematically optimized to determine the best conditions for high quality thick growths with the given reactor geometry. Chamber pressure was found to improve the growth rate, mobility, and roughness of the samples. Growth rates of up to 7.2 $μm$/hr., thicknesses of up to 10 $μm$, Hall mobilities of up to 176 $cm^2$/Vs, RMS roughness down to 5.45 nm, UID concentrations as low as $2 \times$ $10^{15}$ $cm^{-3}$, and controllable intentional doping down to $3 \times$ $10^{15}$ $cm^{-3}$ were achieved. Field plated Schottky barrier diodes (FP-SBDs) were fabricated on a $6.5 \times$ $10^{15}$ $cm^{-3}$ intentionally doped 10 $μm$ thick film to determine the electrical performance of the MOCVD-grown material. The FP-SBD was found to have current density $>$100 A/$cm^2$ at 3 V forward bias with a specific differential on resistance ($R_{on,sp}$) of 16.22 m$Ω$.$cm^2$ and a turn on voltage of 1 V. The diodes were found to have high quality anode metal/semiconductor interfaces with an ideality factor of 1.04, close to unity. Diodes had a maximum breakdown voltage of 1.50 kV, leading to a punch-through maximum field of 2.04 MV/cm under the anode metal, which is a state-of-the-art result for SBDs on MOCVD-grown (010) drift layers.

physics.app-ph↗

arXiv2025

High performance vacuum annealed beta-(AlxGa1-x)2O3/Ga2O3 HFET with f_T/f_MAX of 32/65 GHz

This letter reports high performance beta-(AlxGa1-x)2O3/Ga2O3 Heterostructure FET (HFET) with improved regrowth process. Highly scaled I shaped gate have been fabricated with degenerately doped (N++) source/drain contact regrown by ozone molecular beam epitaxy (MBE). Aiming to address the limitations observed in previous generation devices, this work incorporates a low-power BCl3/Ar and SF6/Ar plasma etching process to remove the AlGaO barrier layer and Ga2O3 layer respectively before regrowth. Additionally, the surface was cleaned and vacuum annealing was carried out before MBE regrowth to reduce any interface resistance between highly doped regrowth N++ and 2DEG layer. These meticulously designed fabrication steps enabled us to achieve the high DC current 0.5 A/mm at 5V drain bias with 6.1 $\mathrmΩ$.mm on resistance (R\textsubscript{ON}) at V_GS=3V, peak transconductance (g_m) of 110 mS/mm at room temperature (V_DS=15V) and around 0.8 A/mm (V_DS=5V) peak I_ON} at low temperature (100K). Current gain cut-off frequency (f_T) of 32 GHz and peak power gain cut-off frequency (f_MAX) of 65 GHz were extracted from RF measurements. f_T.L_G product was estimated to be 6.1 GHz-$μ$m for 191 nm L_G and 32 GHz f_T, which is one of the highest reported among Ga2O3 devices. With thicker Al2O3, device shows no current collapse demonstrating first time successful traps passivation with Al2O3 for Ga2O3 devices.

cond-mat.mtrl-sci↗

arXiv2023

Sub-100 nm β-Ga2O3 MOSFET with 55 GHz fMAX and >100 V breakdown

This letter reports a highly scaled 90 nm gate length beta-Ga2O3 T-gate MOSFET with no current collapse and record power gain cut off frequency (fMAX). The epitaxial stack of 60 nm thin channel MOSFET was grown by Molecular Beam Epitaxy (MBE) and highly doped (n++) contact regrowth was carried out by Metal Organic Chemical Vapour Deposition (MOCVD) in the source/drain region. Maximum on current (IDS, MAX) of 160 mA/mm and transconductance (gm) around 36 mS/mm was measured at VDS= 10 V for LSD= 1.5 micrometer channel length. Transconductance is limited by higher channel sheet resistance (Rsheet). We observed no current collapse for both drain and gate lag measurement even at higher VDG,Q quiescent bias points. This is the first report of Ga2O3 FET showing no current collapse without any external passivation. Breakdown voltage around 125 V was reported for LGD= 1.2 micrometer. We extracted 27 GHz current gain cut off frequency (fT) and 55 GHz fMAX for 20 V drain bias. fMAX value mentioned here is the highest for Ga2O3 and the first demonstration of 55 GHz operation. fT. VBR product of 3.375 THz.V has been calculated which is comparable with state-of-art GaN HEMT. This letter suggests that Ga2O3 can be a suitable candidate for X-band application.

cond-mat.mtrl-sci↗

arXiv2023

Electrical Characteristics of in situ Mg-doped beta-Ga2O3 Current-Blocking Layer for Vertical Devices

The lack of p-type doping has impeded the development of vertical gallium oxide (Ga2O3) devices. Current blocking layers (CBL) using implanted deep acceptors has been used to demonstrate vertical devices. This paper presents the first demonstration of in situ Mg-doped beta-Ga2O3 CBLs grown using metalorganic chemical vapor deposition. Device structures were designed with in-situ Mg doped layers with varied targeted Mg doping concentrations, which were calibrated by quantitative secondary ion mass spectroscopy (SIMS). The effectiveness of the CBL is characterized using temperature dependent current-voltage measurements using n-Mg-doped-n structures, providing crucial insight into the underlying mechanisms. To further validate the experimental results, a TCAD simulation is performed and the electrically active effective doping is found to be dependent on the Mg-doping density, offering a new perspective on the optimization of CBL performance. Breakdown measurements show a 3.4 MV/cm field strength. This study represents a significant step forward in the development of Ga2O3-based devices and paves the way for future advancements in this exciting field.

cond-mat.mtrl-sci↗

arXiv2022

Beta-Ga2O3 MOSFETs with near 50 GHz fMAX and 5.4 MV/cm average breakdown field

This letter reports high-performance $\mathrmβ Ga2O3 thin channel MOSFETs with T-gate and degenerately doped source/drain contacts regrown by MOCVD. Gate length scaling (LG= 160-200 nm) leads to a peak drain current (ID,MAX) of 285 mA/mm and peak trans-conductance (gm) of 52 mS/mm at 10 V drain bias with 23.5 Ohm mm on resistance (Ron). A low metal/n+ contact resistance of 0.078 Ohm mm was extracted from TLM measurement. Ron is dominated by interface resistance between channel and regrown layer. A gate-to-drain breakdown voltage of 192 V is measured for LGD = 355 nm resulting in average breakdown field (E_AVG) of 5.4 MV/cm. This E_AVG is the highest reported among all sub-micron gate length lateral FETs. RF measurements on 200 nm Silicon Nitride (Si3N4) passivated device shows a current gain cut off frequency (f_T) of 11 GHz and record power gain cut off frequency (f_MAX) of 48 GHz. The f_T.V_Br product is 2.11 THz.V for 192 V breakdown voltage. The switching figure of merit exceeds that of silicon and is comparable to mature wide-band gap devices.

cond-mat.mtrl-sci↗