arXiv subjects

Christian Klinke

Publications and source records attributed to Christian Klinke.

At least 73 records · Page 4Linked to original sources

arXiv2013

Field-effect transistors made of individual colloidal PbS nanosheets

Two-dimensional materials are considered for future quantum devices and are usually produced by extensive methods like molecular beam epitaxy. We report on the fabrication of field-effect transistors using individual ultra-thin lead sulfide nanostructures with lateral dimensions in the micrometer range and a height of a few nanometers as conductive channel produced by a comparatively fast, inexpensive, and scalable colloidal chemistry approach. Contacted with gold electrodes, such devices exhibit p-type behavior and temperature-dependent photoconductivity. Trap states play a crucial role in the conduction mechanism. The performance of the transistors is among the ones of the best devices based on colloidal nanostructures.

cond-mat.mtrl-sci↗

arXiv2013

Metal nanoparticle field-effect transistor

We demonstrate that by means of a local top-gate current oscillations can be observed in extended, monolayered films assembled from monodisperse metal nanocrystals -- realizing transistor function. The oscillations in this metal-based system are due to the occurrence of a Coulomb energy gap in the nanocrystals which is tunable via the nanocrystal size. The nanocrystal assembly by the Langmuir-Blodgett method yields homogeneous monolayered films over vast areas. The dielectric oxide layer protects the metal nanocrystal field-effect transistors from oxidation and leads to stable function for months. The transistor function can be reached due to the high monodispersity of the nanocrystals and the high super-crystallinity of the assembled films. Due to the fact that the film consists of only one monolayer of nanocrystals and all nanocrystals are simultaneously in the state of Coulomb blockade the energy levels can be influenced efficiently (limited screening).

cond-mat.mtrl-sci↗

arXiv2013

Sliding on a Nanotube: Interplay of Friction, Deformations and Structure

The frictional properties of individual carbon nanotubes (CNTs) are studied by sliding an atomic force microscopy tip across and along its principle axis. This direction-dependent frictional behavior is found to correlate strongly with the presence of structural defects, surface chemistry, and CNT chirality. This study shows that it is experimentally possible to tune the frictional/adhesion properties of a CNT by controlling the CNT structure and surface chemistry, as well as use friction force to predict its structural and chemical properties.

cond-mat.mtrl-sci↗

arXiv2013

Morphology dependence of radial elasticity in multiwalled boron nitride nanotubes

We report on the measurement of the effective radial modulus of multiwalled Boron Nitride nanotubes with external radii in the range 3.7 to 36 nm and number of layers in between 5 and 48. These Boron Nitride nanotubes are radially much stiffer than previously reported thinner and smaller Boron Nitride nanotubes. Here, we show the key role of the morphology of the nanotubes in determining their radial rigidity, in particular we find that the external and internal radii, R_ext and R_int, have a stronger influence on the radial modulus than the NT's thickness, t. We find that the effective radial modulus decreases nonlinearly with 1/R_ext until reaching, for a large number of layers and a large radius, the transverse elastic modulus of bulk hexagonal-Boron Nitride.

cond-mat.mtrl-sci↗

arXiv2013

CdS nanoparticles capped with 1-substituted 5-thiotetrazoles: Synthesis, characterization, and thermolysis of the surfactant

We propose a new type of surfactants, namely, tetrazole derivatives which can be controllably removed from the nanoparticle surface. Tetrazoles are a peculiar class of heterocyclic compounds. The presence of four nitrogen atoms in the tetrazole ring determines their interesting physical and chemical properties. Tetrazoles show high thermal stability below 200C while decomposing at higher temperature with formation of gaseous products and no or very little solid residue. Moreover, the tetrazole group is known as an important ligand in coordination chemistry. Its donor nitrogen atoms can bind to various metal ions leading to stable complexes with diverse coordination modes of the heteroring. We report the synthesis of CdS NPs capped with 1-R-5-thiotetrazoles using two different synthetic schemes: solution-phase and solventless single precursor approaches. In both synthetic procedures cadmium thiotetrazolates were used as cadmium precursors and sources of surfactant.

cond-mat.mtrl-sci↗

arXiv2013

Adhesion and size dependent friction anisotropy in boron nitride nanotubes

The frictional properties of individual multiwalled boron nitride nanotubes (BN-NTs) synthesized by chemical vapor deposition (CVD) and deposited on a silicon substrate are investigated using an atomic force microscope tip sliding along (longitudinal sliding) and across (transverse sliding) the tube's principal axis. Because of the tube transverse deformations during the tip sliding, a larger friction coefficient is found for the transverse sliding as compared to the longitudinal sliding. Here, we show that the friction anisotropy in BN-NTs, defined as the ratio between transverse and longitudinal friction forces per unit area, increases with the nanotube-substrate contact area. Larger contact area denotes stronger surface adhesion, resulting in a longitudinal friction coefficient closer to the value expected in absence of transverse deformations. Compared to carbon nanotubes (C-NT), BN-NTs display a friction coefficient in each sliding direction with intermediate values between CVD and arc discharge C-NTs. CVD BN-NTs with improved tribological properties and higher oxidation temperature might be a better candidate than CVD C-NTs for applications in extreme environments.

cond-mat.mtrl-sci↗

arXiv2013

Tailoring the diameter of decorated CN nanotubes by temperature variations using HF-CVD

Patterned films of decorated nitrogenated carbon (C-N) nanotubes were catalytically synthesised by hot filament chemical vapour deposition (HF-CVD) in a nitrogen-methane-ammonia environment. The systematic study of a transition between different kinds of C-N nanostructures as a function of the local substrate temperature ranging from 700 up to 820C is presented. The morphology, the diameter as well as the properties of the generated tubular structures showed strong dependence on this parameter. By means of electron microscopy a new type of decoration covering all tubular structures was observed. Buckled lattice fringes revealed the disordered graphitic-like character of the hollow C-N nanotubes. Raman spectroscopy confirmed a transition in the microscopic order as a function of temperature. Furthermore field emission in vacuum was studied and showed a spectacular correlation to the deposition temperature and therefore the diameter of the C-N tubes. For arrays of tubes thinner than 50 nm an onset field below 4 V/um was observed.

cond-mat.mtrl-sci↗

arXiv2013

Influence of the deposition conditions on the field emission properties of patterned nitrogenated carbon nanotube films

The electron field emission of patterned films of nitrogenated carbon nanotubes is shown to be decisively influenced by the deposition conditions. The growth was carried out by decomposing methane in a nitrogen/ammonia atmosphere using hot filament chemical vapor deposition (CVD). The diameter of the produced tubes depended critically on the distance between substrate and filament, and the field emission properties applied fields needed for electron emission, field amplification factor) could be directly correlated to the film morphology. This demonstrates the possibility of tuning the field emission properties of such film emitters. For arrays of nanotubes thinner than 50 nm, the onset of field emission was observed at about 4 V/um, and a current density of 10 mA/cm2 was obtained for an applied field of 7.2 V/um.

cond-mat.mtrl-sci↗

arXiv2013

Oxygen and light sensitive field-effect transistors based on ZnO nanoparticles attached to individual double-wall carbon nanotubes

The attachment of semiconducting nanoparticles to carbon nanotubes is one of the most challenging subjects in nanotechnology. Successful high coverage attachment and control over the charge transfer mechanism and photo-current generation opens a wide field of new applications such as highly effective solar cells and fibre-enhanced polymers. In this work we study the charge transfer in individual double-wall carbon nanotubes highly covered with uniform ZnO nanoparticles. The synthetic colloidal procedure was chosen to avoid long-chained ligands at the nanoparticle-nanotube interface. The resulting composite material was used as conductive channel in a field effect transistor device and the electrical photo-response was analysed under various conditions. By means of the transfer characteristics we could elucidate the mechanism of charge transfer from non-covalently attached semiconducting nanoparticles to carbon nanotubes. The role of positive charges remaining on the nanoparticles is discussed in terms of a gating effect.

cond-mat.mtrl-sci↗

arXiv2012

Thermoelectric properties of lead chalcogenide core-shell nanostructures

We present the full thermoelectric characterization of nanostructured bulk PbTe and PbTe-PbSe samples fabricated from colloidal core-shell nanoparticles followed by spark plasma sintering. An unusually large thermopower is found in both materials, and the possibility of energy filtering as opposed to grain boundary scattering as an explanation is discussed. A decreased Debye temperature and an increased molar specific heat are in accordance with recent predictions for nanostructured materials. On the basis of these results we propose suitable core-shell material combinations for future thermoelectric materials of large electric conductivities in combination with an increased thermopower by energy filtering.

cond-mat.mtrl-sci↗

arXiv2012

Hindered rolling and friction anisotropy in supported carbon nanotubes

Carbon nanotubes (CNTs) are well known for their exceptional thermal, mechanical and electrical properties. For many CNT applications it is of the foremost importance to know their frictional properties. However, very little is known about the frictional forces between an individual nanotube and a substrate or tip. Here, we present a combined theoretical and experimental study of the frictional forces encountered by a nanosize tip sliding on top of a supported multiwall CNT along a direction parallel or transverse to the CNT axis. Surprisingly, we find a higher friction coefficient in the transverse direction compared with the parallel direction. This behaviour is explained by a simulation showing that transverse friction elicits a soft 'hindered rolling' of the tube and a frictional dissipation that is absent, or partially absent for chiral CNTs, when the tip slides parallel to the CNT axis. Our findings can help in developing better strategies for large-scale CNT assembling and sorting on a surface.

cond-mat.mtrl-sci↗

arXiv2012

Radial elasticity of multi-walled carbon nanotubes

We report an experimental and a theoretical study of the radial elasticity of multi-walled carbon nanotubes as a function of external radius. We use atomic force microscopy and apply small indentation amplitudes in order to stay in the linear elasticity regime. The number of layers for a given tube radius is inferred from transmission electron microscopy, revealing constant ratios of external to internal radii. This enables a comparison with molecular dynamics results, which also shed some light onto the applicability of Hertz theory in this context. Using this theory, we find a radial Young modulus strongly decreasing with increasing radius and reaching an asymptotic value of 30 +/- 10 GPa.

cond-mat.mtrl-sci↗

arXiv2012

Tunable electrical transport through annealed monolayers of monodisperse cobalt-platinum nanoparticles

We synthesized monodisperse cobalt-platinum nanoparticles Co(0.14-0.22)Pt(0.86-0.78) of 9 nm in diameter by colloidal chemistry methods and deposited them by the Langmuir-Blodgett technique as highly ordered monolayers onto substrates with e-beam defined gold electrodes. Upon annealing we observe an increase of conductivity over more than 4 orders of magnitude. A first attempt of explanation of this unanticipated effect, a nanoparticle displacement, could not be confirmed for annealing temperatures below 400C. A second approach, a carbonization of the ligands, however, could be confirmed by Raman spectroscopy. The simple thermal treatment allows tuning essential properties of electronic devices based on nanoparticles by the manipulation of the interparticle coupling, namely the electrical conductivity, the Coulomb blockade characteristic, and the activation energy of the system.

cond-mat.mtrl-sci↗

arXiv2011

Growth and reductive transformation of a gold shell around pyramidal cadmium selenide nanocrystals

We report the growth of an unstable shell-like gold structure around dihexagonal pyramidal CdSe nanocrystals in organic solution and the structural transformation to spherical domains by two means: i) electron beam irradiation (in situ) and (ii) addition of a strong reducing agent during synthesis. By varying the conditions of gold deposition, such as ligands present or the geometry of the CdSe nanocrystals, we were able to tune the gold domain size between 1.4 nm to 3.9 nm and gain important information on the role of surface chemistry in hetero nanoparticle synthesis and seed reactivity, both of which are crucial points regarding the chemical design of new materials for photocatalysis and optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2011

Ultra-thin PbS sheets by two-dimensional oriented attachment

Controlling anisotropy is a key concept to generate complex functionality in advanced materials. For this, oriented attachment of nanocrystal building blocks, a self assembly of particles into larger single crystalline objects, is one of the most promising approaches in nanotechnology. We report here the 2D oriented attachment of PbS nanocrystals into ultra-thin single crystal sheets with dimensions on the micrometer scale. We found that this process is initiated by co-solvents which alter nucleation and growth rates during the primary nanocrystal formation and finally driven by dense packing of oleic acid ligands on {100} facets of PbS. The obtained nanosheets can be readily integrated in a photo-detector device without further treatment.

cond-mat.mtrl-sci↗

arXiv2011

ZT enhancement in solution-grown Sb(2-x)Bi(x)Te3 nanoplatelets

We report a solution-processed, ligand supported synthesis of 15-20 nm thick Sb(2-x)Bi(x)Te3 nanoplatelets. After complete ligand removal by a facile NH3-based etching procedure, the platelets are spark plasma sintered to a p-type nanostructured bulk material with preserved crystal grain sizes. Due to this nanostructure, the total thermal conductivity is reduced by 60 % in combination with a reduction in electric conductivity of as low as 20 % as compared to the bulk material demonstrating the feasibility of the phonon-glass electron-crystal concept. An enhancement in the dimensionless thermoelectric figure of merit of up to 15 % over state-of-the-art bulk materials is achieved meanwhile shifting the maximum to significantly higher temperatures.

cond-mat.mtrl-sci↗

arXiv2011

Reversible attachment of platinum alloy nanoparticles to non-functionalized carbon nanotubes

The formation of monodisperse, tunable sized, alloyed nanoparticles of Ni, Co, or Fe with Pt and pure Pt nanoparticles attached to carbon nanotubes has been investigated. Following homogeneous nucleation, nanoparticles attach directly to non-functionalized singlewall and multiwall carbon nanotubes during nanoparticle synthesis as a function of ligand nature and the nanoparticle work function. These ligands do not only provide a way to tune the chemical composition, size and shape of the nanoparticles but also control a strong reversible interaction with carbon nanotubes and permit controlling the nanoparticle coverage. Raman spectroscopy reveals that the sp2 hybridization of the carbon lattice is not modified by the attachment. In order to better understand the interaction between the directly attached nanoparticles and the non-functionalized carbon nanotubes we employed first-principles calculations on model systems of small Pt clusters and both zig-zag and armchair singlewall carbon nanotubes. The detailed comprehension of such systems is of major importance since they find applications in catalysis and energy storage.

cond-mat.mtrl-sci↗

arXiv2010

Synthesis and thermoelectric characterization of Bi2Te3 nanoparticles

We report a novel synthesis for near monodisperse, sub-10-nm Bi2Te3 nanoparticles. At first, a new reduction route to bismuth nanoparticles is described which are applied as starting materials in the formation of rhombohedral Bi2Te3 nanoparticles. After ligand removal by a novel hydrazine hydrate etching procedure, the nanoparticle powder is spark plasma sintered to a pellet with preserved crystal grain sizes. Unlike previous works on the properties of Bi2Te3 nanoparticles, the full thermoelectric characterization of such sintered pellets shows a highly reduced thermal conductivity and the same electric conductivity as bulk n-type Bi2Te3.

cond-mat.mtrl-sci↗