arXiv subjects

Christian Klinke

Publications and source records attributed to Christian Klinke.

89 records · Page 5Linked to original sources

arXiv2010

Synthesis of InP nanoneedles and their use as Schottky devices

Indium phosphide (InP) nanostructures have been synthesized by means of colloidal chemistry. Under appropriate conditions needle-shaped nanostructures composed of an In head and an InP tail with lengths up to several micrometers could be generated in a one-pot synthesis. The growth is interpreted in terms of simultaneous decomposition of the In precursor and in situ generation of In and InP nanostructures. Owing to their specific design such In/InP nanoneedles suit the use as ready-made Schottky transistors. Their transfer and output characteristics are presented.

cond-mat.mtrl-sci↗

arXiv2009

On the electric conductivity of highly ordered monolayers of monodisperse metal nanoparticles

Monolayers of colloidally synthesized cobalt-platinum nanoparticles of different diameters characterized by TEM (transmission electron microscopy) were deposited on structured silicon oxide substrates and characterized by SEM (scanning electron microscopy), GISAXS (grazing incidence x-ray scattering), and electric transport measurements. The highly ordered nanoparticle films show a thermally activated electron hopping between spatially adjacent particles at room temperature and Coulomb blockade at low temperatures. We present a novel approach to experimentally determine the particles charging energies giving values of 6.7-25.4 meV dependent on the particles size and independent of the interparticle distance. These observations are supported by FEM (finite element method) calculations showing the self-capacitance to be the determining value which only depends on the permittivity constant of the surrounding space and the particles radius.

cond-mat.mtrl-sci↗

arXiv2009

Carbon supported CdSe nanocrystals

Insights to the mechanism of CdSe nanoparticle attachment to carbon nanotubes following the hot injection method are discussed. It was observed that the presence of water improves the nanotube coverage while Cl containing media are responsible for the shape transformation of the nanoparticles and further attachment to the carbon lattice. The experiments also show that the mechanism taking place involves the right balance of several factors, namely, low passivated nanoparticle surface, particles with well-defined crystallographic facets, and interaction with an organics-free sp2 carbon lattice. Furthermore, this procedure can be extended to cover graphene by quantum dots.

cond-mat.mtrl-sci↗

arXiv2009

3D characterization of CdSe nanoparticles attached to carbon nanotubes

The crystallographic structure of CdSe nanoparticles attached to carbon nanotubes has been elucidated by means of high resolution transmission electron microscopy and high angle annular dark field scanning transmission electron microscopy tomography. CdSe rod-like nanoparticles, grown in solution together with carbon nanotubes, undergo a morphological transformation and become attached to the carbon surface. Electron tomography reveals that the nanoparticles are hexagonal-based with the (001) planes epitaxially matched to the outer graphene layer.

cond-mat.mtrl-sci↗

arXiv2009

Preparation and electrical properties of cobalt-platinum nanoparticle monolayers deposited by the Langmuir-Blodgett technique

The Langmuir-Blodgett technique was utilized and optimized to produce closed monolayers of cobalt-platinum nanoparticles over vast areas. It is shown that sample preparation, "dipping angle", and subphase type have a strong impact on the quality of the produced films. The amount of ligands on the nanoparticles surface must be minimized, the dipping angle must be around 105$^{\circ}$, while the glycol subphase is necessary to obtain nanoparticle monolayers. The achieved films were characterized by scanning electron microscopy (SEM) and grazing incidence x-ray scattering (GISAXS). The electrical properties of the deposited films were studied by direct current (DC) measurements showing a discrepancy to the variable range hopping transport from the granular metal model, and favoring the simple thermal activated charge transport. SEM, GISAXS as well as DC measurements confirm a narrow size distribution and high ordering of the deposited films.

cond-mat.mtrl-sci↗

arXiv2008

Quantum dot attachment and morphology control by carbon nanotubes

Novel applications in nanotechnology rely on the design of tailored nano-architectures. For this purpose, carbon nanotubes and nanoparticles are intensively investigated. In this work we study the influence of non-functionalized carbon nanotubes on the synthesis of CdSe nanoparticles by means of organometallic colloidal routes. This new synthesis methodology does not only provide an effective path to attach nanoparticles non-covalently to carbon nanotubes but represents also a new way to control the shape of nanoparticles.

cond-mat.mtrl-sci↗

arXiv2008

Iron nanoparticle formation in a metal-organic matrix: from ripening to gluttony

A simple method for the fabrication of metal nanoparticles is introduced. Heating metal-organic crystals in vacuum results in the formation of well defined metal particles embedded in a carbon matrix. The method is demonstrated for iron-phthalocyanine. At 500C homogeneously distributed iron nanoparticles with a reasonably narrow size distribution form by nucleation and ripening. After this initial phase the formation kinetics changes drastically. The particles move in the matrix to incorporate material. The "gluttony" phase shows astonishing similarities with the search for nutrition of living micro-organisms. Particle formation, ripening and gluttony are followed in-situ by transmission electron microscopy.

cond-mat.mtrl-sci↗

arXiv2007

Interaction of solid organic acids with carbon nanotube field effect transistors

A series of solid organic acids were used to p-dope carbon nanotubes. The extent of doping is shown to be dependent on the pKa value of the acids. Highly fluorinated carboxylic acids and sulfonic acids are very effective in shifting the threshold voltage and making carbon nanotube field effect transistors to be more p-type devices. Weaker acids like phosphonic or hydroxamic acids had less effect. The doping of the devices was accompanied by a reduction of the hysteresis in the transfer characteristics. In-solution doping survives standard fabrication processes and renders p-doped carbon nanotube field effect transistors with good transport characteristics.

cond-mat.mtrl-sci↗

arXiv2006

Field-effect transistors assembled from functionalized carbon nanotubes

We have fabricated field effect transistors from carbon nanotubes using a novel selective placement scheme. We use carbon nanotubes that are covalently bound to molecules containing hydroxamic acid functionality. The functionalized nanotubes bind strongly to basic metal oxide surfaces, but not to silicon dioxide. Upon annealing, the functionalization is removed, restoring the electronic properties of the nanotubes. The devices we have fabricated show excellent electrical characteristics.

cond-mat.mtrl-sci↗

arXiv2006

Enhanced field emission from multiwall carbon nanotube films by secondary growth

We have studied nickel, gold, and ferritin coatings on catalytically grown multiwall carbon nanotubes, as well as the generation of secondary nanotubes by resubmitting the decorated nanotubes to the chemical vapor deposition process. Nickel layers sputtered on nanotubes show a stronger interaction with the nanotube walls than gold coatings. At ambient temperature this results in a metal film that is more homogeneous for Ni than for Au. Surface mass transport at elevated temperatures leads to a transformation of the coating to nanoscale clusters on the nanotube surface. The resulting Au clusters are sphere-like with a very small contact area with the nanotube whereas the Ni clusters are stretched along the tube axis and have a large contact area. Secondary nanotubes were established by growing nanotubes directly on the walls of primary nanotubes. Thin Ni layers or ferritin served as catalyst. We compared the field emission properties of samples with and without secondary nanotubes. The presence of secondary nanotubes enhances the field emission substantially.

cond-mat.mtrl-sci↗

arXiv2006

Tungsten oxide nanowire growth by chemically-induced strain

We have investigated the formation of tungsten oxide nanowires under different CVD conditions. We find that exposure of oxidized tungsten films to hydrogen and methane at 900C leads to the formation of a dense array of typically 10 nm diameter nanowires. Structural and chemical analysis shows that the wires are crystalline WO3. We propose a chemically-driven whisker growth mechanism in which interfacial strain associated with the formation of tungsten carbide stimulates nanowire growth. This might be a general concept, applicable also in other nanowire systems.

cond-mat.mtrl-sci↗

arXiv2006

Charge Transfer Induced Polarity Switching in Carbon Nanotube Transistors

We probed the charge transfer interaction between the amine-containing molecules: hydrazine, polyaniline and aminobutyl phosphonic acid, and carbon nanotube field effect transistors (CNTFETs). We successfully converted p-type CNTFETs to n-type and drastically improved the device performance in both the ON- and OFF- transistor states utilizing hydrazine as dopant. We effectively switched the transistor polarity between p- and n- type by accessing different oxidation states of polyaniline. We also demonstrated the flexibility of modulating the threshold voltage (Vth) of a CNTFET by engineering various charge-accepting and -donating groups in the same molecule.

cond-mat.mtrl-sci↗

arXiv2005

Formation of metallic nano-crystals from gel-like precursor films for CVD nanotube growth: An in-situ TEM characterization

The evolution of a continuous Fe(NO3)3 catalyst film was observed by in-situ annealing in a Transmission Electron Microscope (TEM). Such catalysts are routinely used in the catalytic growth of carbon nanotubes. The experiments reveal that crystalline particles form from the gel-like film already around 300C. At usual carbon nanotube growth temperatures of 700C, the particles are single-crystalline with a log-normal size distribution. The observations furthermore show that in spite of the crystalline structure of the particles there is a high mobility. The experiments allow to obtain detailed information about the chemistry and the crystallinity of the catalyst film, which provides valuable information for the interpretation of the carbon nanotube growth by chemical vapor deposition.

cond-mat.mtrl-sci↗

arXiv2005

Thermodynamic calculations on the catalytic growth of multiwall carbon nanotubes

We have developed a thermodynamic model of the catalytic growth of multiwall carbon nanotubes from hydrocarbon precursors at elevated temperature. Using this model we have computed the heat distribution, and carbon concentration in the catalyst. Calculations delivered a analytical formula for the growth time and growth rate. We find that the growth is mainly driven by a concentration gradient within the catalyst, rather than a temperature gradient.

cond-mat.mtrl-sci↗

arXiv2005

Comparative study of the catalytic growth of patterned carbon nanotube films

Three different catalysts (Fe, Ni, Co nitrates dissolved in ethanol) were patterned on a SiO2/Si substrate and multi-wall carbon nanotubes were grown by catalytic decomposition of acetylene. We compare the growth of the carbon nanostructures in the temperature range between 580C and 1000C. With our experimental set-up the catalyst solutions of cobalt and nickel were found to be less efficient than the one of iron. An optimal production of multi-wall nanotubes was observed at temperatures between 650C and 720C with the iron solution as catalyst. We found a tendency towards thicker structures with higher temperatures. Finally, we suggest a mechanism for the growth of these carbon structures.

cond-mat.mtrl-sci↗

arXiv2005

Raman spectroscopy and field emission measurements on catalytically grown carbon nanotubes

We used microcontact printing to pattern a silicon surface with an iron-containing catalytic solution. Multi-wall carbon nanotubes were subsequently grown on the patterned areas by chemical vapor deposition at temperatures between 650 and 1000C. We demonstrate that the diameter of the catalytically grown multi-wall nanotubes increases with the deposition temperature. Raman spectroscopy has been used to investigate the crystalline character of the obtained structures and it is found that the fraction of the nano-crystalline shell increases with the temperatures. The measurement of the field emission properties shows a correlation between the tube diameter and the emission field values.

cond-mat.mtrl-sci↗

arXiv2005

Self-aligned carbon nanotube transistors with charge transfer doping

This letter reports a charge transfer p-doping scheme which utilizes one-electron oxidizing molecules to obtain stable, unipolar carbon nanotube transistors with a self-aligned gate structure. This doping scheme allows one to improve carrier injection, tune the threshold voltage Vth, and enhance the device performance in both the ON- and OFF- transistor states. Specifically, the nanotube transistor is converted from ambipolar to unipolar, the device drive current is increased by 2-3 orders of magnitude, the device OFF current is suppressed and an excellent Ion/Ioff ratio of six order of magnitude is obtained. The important role played by metal-nanotube contacts modification through charge transfer is demonstrated.

cond-mat.mtrl-sci↗