Searcharxiv⌕ Search

arXiv subjects

Christian Koos

Publications and source records attributed to Christian Koos.

At least 19 recordsLinked to original sources
arXiv2026

Long-term performance of the MLR-TT sensor: two-photon polymerization validation in the telescope environment

We report on the long-term optical performance of a two-photon polmerized microlens ring tip-tilt sensor. The study is backed by repeated measurements over the last six years, since the sensor was first tested in the sky at the Large Binocular Telescope. The goal of the study is to assess the feasibility of the underlying technology of two-photon polymerization for future instrumentation in the realistic environments experienced at astronomical telescopes.

astro-ph.IM↗
arXiv2026

Broadband suspended lithium tantalate Mach-Zehnder modulator achieving a 460 Gbit/s net data rate

Thin-film lithium tantalate photonic integrated circuits have recently been demonstrated as a promising next-generation electro-optic platform, offering favorable properties including reduced DC drift, higher optical power handling, and lower birefringence compared to lithium niobate. However, high-speed LiTaO3 modulators reported to date have predominantly relied on silicon substrates, whose large dielectric constant compromises microwave velocity matching and imposes RF conductor losses that limit the achievable electro-optic bandwidth. Here, we implement a silicon substrate undercut technique to suspend the electrode region of lithium-tantalate-on-insulator (LTOI) Mach-Zehnder modulators (MZMs), effectively decoupling the traveling-wave electrodes from the high-permittivity silicon handle wafer, thereby reducing microwave losses. In addition, the undercut removes any susceptibility to parasitic surface conductance (PSC) induced losses of the oxide-silicon interface. The fabricated MZM achieves a 3 dB electro-optic bandwidth of 110 GHz, with a half-wave voltage of 5.1 V for an 8 mm-long device. Exploiting the extended bandwidth, we demonstrate a high single-lane intensity-modulation and direct-detection (IMDD) net data rate of 460 Gbit/s using PAM8 signaling. These results establish silicon substrate undercut as an effective and process-compatible pathway to unlock the full electro-optic potential of lithium tantalate on its native silicon-based wafer platform.

physics.optics↗
arXiv2026

Low voltage and high-bandwidth thin-film lithium tantalate modulator on a silicon dioxide substrate

Modern communication networks demand ever-increasing transmission bandwidth, placing stringent requirements on low-cost, high-performance electro-optic modulators. Substantial advances have been made in integrated photonics employing lithium niobate on insulator. In contrast, photonic integrated circuits based on lithium tantalate -- a material already commercially adopted for wireless filters -- have been developed, offering reduced DC drift, higher optical power handling, and lower birefringence. These advantages enable more complex and dense photonic integrated circuits, and make lithium tantalate a promising material platform for next-generation integrated electro-optic modulators. However, in contrast to the extensively studied thin-film lithium niobate platform, thin-film lithium tantalate modulators have only been explored on silicon substrates. Here, we report the first fabrication and characterization of thin-film lithium tantalate electro-optic modulators manufactured on a 4-inch (100 mm) fused-silica substrate for adapting a low-loss slow-wave microwave electrode to improve the electro-optic bandwidth. By employing a slow-wave electrode design to achieve velocity matching between microwave and optical signals, the demonstrated modulator achieves a 3-dB electro-optic bandwidth of 64 GHz with a low half-wave voltage of 1.53 V, with potential to operate at the measured 100 GHz electrical bandwidth, if the employed spectral biasing is removed. The modulator moreover exhibits low bias drift, with a constant switching voltage down to 10 mHz. This performance enables high-speed data transmission comparable to state-of-the-art lithium niobate modulators fabricated on quartz substrates. Using the fabricated devices, a net single lane data rate of 440.6 Gbps is achieved using PAM8 signaling.

physics.optics↗
arXiv2025

Heterogeneously integrated lithium tantalate-on-silicon nitride modulators for high-speed communications

Driven by the prospects of higher bandwidths for optical interconnects, integrated modulators involving materials beyond those available in silicon manufacturing increasingly rely on the Pockels effect. For instance, wafer-scale bonding of lithium niobate films onto ultralow loss silicon nitride photonic integrated circuits provides heterogeneous integrated devices with low modulation voltages operating at higher speeds than silicon photonics. However, in spite of its excellent electro-optic modulation capabilities, lithium niobate suffers from drawbacks such as birefringence and long-term bias instability. Among other available electro-optic materials, lithium tantalate can overcome these shortcomings with its comparable electro-optic coefficient, significantly improved photostability, low birefringence, higher optical damage threshold, and enhanced DC bias stability. Here, we demonstrate wafer-scale heterogeneous integration of lithium tantalate films on low-loss silicon nitride photonic integrated circuits. With this hybrid platform, we implement modulators that combine the ultralow optical loss ($\sim$ 14.2 dB/m), mature processing and wide transparency of silicon nitride waveguides with the ultrafast electro-optic response of thin-film lithium tantalate. The resulting devices achieve a 6 V half-wave voltage, and support modulation bandwidths of up to 100 GHz. We use single intensity modulators and in-phase/quadrature (IQ) modulators to transmit PAM4 and 16-QAM signals reaching up to 333 and 581 Gbit/second net data rates, respectively. Our results demonstrate that lithium tantalate is a viable approach to broadband photonics sustaining extended optical propagation, which can uniquely contribute to technologies such as RF photonics, interconnects, and analog signal processors.

physics.optics↗
arXiv2025

Copper Damascene Process-Based High-Performance Thin Film Lithium Tantalate Modulators

Interfacing electrical and optical systems is a ubiquitous requirement for modern networks. Competitive footprint, efficiency, and bandwidth figures have propelled interest in deploying integrated electro-optic modulators based on Pockels materials for such tasks. Due to its wide usage in legacy bulk electro-optic modulators, and triggered by the availability of 'on insulator' wafers, lithium niobate based devices have seen major advances. Recently, even more favorable properties have been demonstrated in lithium tantalate based devices, featuring similar Pockels effect, but exhibiting lower bias drift and lower birefringence, while equally benefiting from existing volume usage in wireless RF filters. Despite major progress in integrated modulators, these newly emerged ferro-electrical modulators cannot be integrated tightly with electronics yet using standardized processes, such as flip-chip bonding. Here, we overcome this bottleneck by incorporating the copper Damascene process in the fabrication of integrated lithium tantalate modulators. We demonstrate modulators featuring microwave losses that are ~10% lower than in designs relying on conventional gold electrodes. Our results allow us to reach data transmission figures on par with those of electro-optic modulators fabricated with other low-resistivity, yet less common, metals. Specifically, our fabricated modulators are able to achieve data transmission rates of 416 and 540 Gbit/s while preserving bit error ratios below the 25% SD-FEC threshold in a PAM4 and PAM8 transmission schemes, respectively. Together with the commercial availability of lithium tantalate as a Pockels material, our results open a path towards scalable and direct chip-on-wafer embedding of EO modulators with micro-electronic integrated circuits.

physics.optics↗
arXiv2025

Bistable soliton optical frequency combs in a second harmonic generation Kerr cavity

We study the dynamics and stability of soliton optical frequency comb generation in a dissipative, coherently pumped cavity with both second and third-order nonlinearity. Cavity sweep simulations and linear stability analysis based on path continuation reveal the existence of bistable solitons. These families of solutions represent a continuous transition between a purely quadratic and a Kerr cavity soliton frequency comb. Perspective demonstrations of these novel optical sources is an ongoing relevant subject within the frequency comb community.

nlin.CD↗
arXiv2024

First Sub-MeV Dark Matter Search with the QROCODILE Experiment Using Superconducting Nanowire Single-Photon Detectors

We present the first results from the Quantum Resolution-Optimized Cryogenic Observatory for Dark matter Incident at Low Energy (QROCODILE). The QROCODILE experiment uses a microwire-based superconducting nanowire single-photon detector (SNSPD) as a target and sensor for dark matter scattering and absorption, and is sensitive to energy deposits as low as 0.11 eV. We introduce the experimental configuration and report new world-leading constraints on the interactions of sub-MeV dark matter particles with masses as low as 30 keV. The thin-layer geometry of the system provides anisotropy in the interaction rate, enabling directional sensitivity. In addition, we leverage the coupling between phonons and quasiparticles in the detector to simultaneously constrain interactions with both electrons and nucleons. We discuss the potential for improvements to both the energy threshold and effective volume of the experiment in the coming years.

hep-ph↗
arXiv2024

Optical Arbitrary Waveform Generation (OAWG) Using Actively Phase-Stabilized Spectral Stitching

The conventional way of generating optical waveforms relies on the in-phase and quadrature (IQ) modulation of a continuous wave (CW) laser tone. In this case, the bandwidth of the resulting optical waveform is limited by the underlying electronic components, in particular by the digital-to-analog converters (DACs) generating the drive signals for the IQ modulator. This bandwidth bottleneck can be overcome by using a concept known as optical arbitrary waveform generation (OAWG), where multiple IQ modulators and DACs are operated in parallel to first synthesize individual spectral slices, which are subsequently combined to form a single ultra-broadband arbitrary optical waveform. However, targeted synthesis of arbitrary optical waveforms from multiple spectral slices has so far been hampered by difficulties to maintain the correct optical phase relationship between the slices. In this paper, we propose and demonstrate spectrally sliced OAWG with active phase stabilization, which permits targeted synthesis of truly arbitrary optical waveforms. We demonstrate the viability of the scheme by synthesizing optical waveforms with record-high bandwidths of up to 325 GHz from four individually generated optical tributaries. In a proof-of-concept experiment, we use the OAWG system to generate 32QAM data signals at symbol rates of up to 320 GBd, which we transmit over 87 km of single-mode fiber and receive by a two-channel non-sliced optical arbitrary waveform measurement (OAWM) system, achieving excellent signal quality. We believe that our scheme can unlock the full potential of OAWG and disrupt a wide range of applications in high-speed optical communications, photonic-electronic digital-to-analog conversion, as well as advanced test and measurement in science and industry.

physics.optics↗
arXiv2024

Ultrabroadband thin-film lithium tantalate modulator for high-speed communications

The continuous growth of global data traffic over the past three decades, along with advances in disaggregated computing architectures, presents significant challenges for optical transceivers in communication networks and high-performance computing systems. Specifically, there is a growing need to significantly increase data rates while reducing energy consumption and cost. High-performance optical modulators based on materials such as InP, thin-film lithium niobate (LiNbO3), or plasmonics have been developed, with LiNbO3 excelling in high-speed and low-voltage modulation. Nonetheless, the widespread industrial adoption of thin film LiNbO3 remains compounded by the rather high cost of the underlying 'on insulator' substrates -- in sharp contrast to silicon photonics, which can benefit from strong synergies with high-volume applications in conventional microelectronics. Here, we demonstrate an integrated 110 GHz modulator using thin-film lithium tantalate (LiTaO3) -- a material platform that is already commercially used for millimeter-wave filters and that can hence build upon technological and economic synergies with existing high-volume applications to offer scalable low-cost manufacturing. We show that the LiTaO3 photonic integrated circuit based modulator can support 176 GBd PAM8 transmission at net data rates exceeding 400 Gbit/s. Moreover, we show that using silver electrodes can reduce microwave losses compared to previously employed gold electrodes. Our demonstration positions LiTaO3 modulator as a novel and highly promising integration platform for next-generation high-speed, energy-efficient, and cost-effective transceivers.

physics.optics↗
arXiv2024

Freeform terahertz structures fabricated by multi-photon lithography and metal coating

Direct-write multi-photon laser lithography (MPL) combines highest resolution on the nanoscale with essentially unlimited 3D design freedom. Over the previous years, the groundbreaking potential of this technique has been demonstrated in various application fields, including micromechanics, material sciences, microfluidics, life sciences as well as photonics, where in-situ printed optical coupling elements offer new perspectives for package-level system integration. However, millimeter-wave (mmW) and terahertz (THz) devices could not yet leverage the unique strengths of MPL, even though the underlying devices and structures could also greatly benefit from 3D freeform microfabrication. One of the key challenges in this context is the fact that functional mmW and THz structures require materials with high electrical conductivity and low dielectric losses, which are not amenable to structuring by multi-photon polymerization. In this work, we introduce and experimentally demonstrate a novel approach that allows to leverage MPL for fabricating high-performance mmW and THz structures with hitherto unachieved functionalities. Our concept exploits in-situ printed polymer templates that are selectively coated through highly directive metal deposition techniques in combination with precisely aligned 3D-printed shadowing structures. The resulting metal-coated freeform structures offer high surface quality in combination with low dielectric losses and conductivities comparable to bulk material values, while lending themselves to fabrication on planar mmW/THz circuits. We experimentally show the viability of our concept by demonstrating a series of functional THz structures such as THz interconnects, probe tips, and suspended antennas. We believe that our approach offers disruptive potential in the field of mmW and THz technology and may unlock an entirely new realm of laser-based 3D manufacturing.

physics.optics↗
arXiv2023

Non-sliced Optical Arbitrary Waveform Measurement (OAWM) Using a Silicon Photonic Receiver Chip

Comb-based optical arbitrary waveform measurement (OAWM) techniques can overcome the bandwidth limitations of conventional coherent detection schemes and may have disruptive impact on a wide range of scientific and industrial applications. Over the previous years, different OAWM schemes have been demonstrated, showing the performance and the application potential of the concept in laboratory experiments. However, these demonstrations still relied on discrete fiber-optic components or on combinations of discrete coherent receivers with integrated optical slicing filters that require complex tuning procedures to achieve the desired performance. In this paper, we demonstrate the first wavelength-agnostic OAWM front-end that is integrated on a compact silicon photonic chip and that neither requires slicing filters nor active controls. Our OAWM system comprises four IQ receivers, which are accurately calibrated using a femtosecond mode-locked laser and which offer a total acquisition bandwidth of 170 GHz. Using sinusoidal test signals, we measure a signal-to-noise-and-distortion ratio (SINAD) of 30 dB for the reconstructed signal, which corresponds to an effective number of bits (ENOB) of 4.7 bit, where the underlying electronic analog-to-digital converters (ADC) turn out to be the main limitation. The performance of the OAWM system is further demonstrated by receiving 64QAM data signals at symbol rates of up to 100 GBd, achieving constellation signal-to-noise ratios (CSNR) that are on par with those obtained for conventional coherent receivers. In a theoretical scalability analysis, we show that increasing the channel count of non-sliced OAWM systems can improve both the acquisition bandwidth and the signal quality. We believe that our work represents a key step towards out-of-lab use of highly compact OAWM systems that rely on chip-scale integrated optical front-ends.

eess.SP↗
arXiv2023

Slice-Less Optical Arbitrary Waveform Measurement (OAWM) in a Bandwidth of More than 600 GHz Using Soliton Microcombs

We propose and demonstrate a novel scheme for optical arbitrary waveform measurement (OAWM) that exploits chip-scale Kerr soliton combs as highly scalable multiwavelength local oscillators (LO) for ultra-broadband full-field waveform acquisition. In contrast to earlier concepts, our approach does not require any optical slicing filters and thus lends itself to efficient implementation on state-of-the-art high-index-contrast integration platforms such as silicon photonics. The scheme allows to measure truly arbitrary waveforms with high accuracy, based on a dedicated system model which is calibrated by means of a femtosecond laser with known pulse shape. We demonstrated the viability of the approach in a proof-of-concept experiment by capturing an optical waveform that contains multiple 16 QAM and 64 QAM wavelength-division multiplexed (WDM) data signals with symbol rates of up to 80 GBd, reaching overall line rates of up to 1.92 Tbit/s within an optical acquisition bandwidth of 610 GHz. To the best of our knowledge, this is the highest bandwidth that has so far been demonstrated in an OAWM experiment.

physics.optics↗
arXiv2022

Sub-kHz-linewidth external-cavity laser (ECL) with Si$_{3}$N$_{4}$ resonator used as a tunable pump for a Kerr frequency comb

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. External feedback circuits can be efficiently implemented using low-loss silicon nitride (Si$_{3}$N$_{4}$) waveguides, which do not suffer from two-photon absorption and can thus handle much higher power levels than conventional silicon photonics. However, co-integrating III-V-based gain elements with tunable external feedback circuits in chip-scale modules still represents a challenge, requiring either technologically demanding heterogeneous integration techniques or costly high-precision multi-chip assembly. In this work, we demonstrate Si$_{3}$N$_{4}$-based hybrid integrated ECL that exploit 3D-printed structures such as intra-cavity photonic wire bonds and facet-attached microlenses for low-loss optical coupling with relaxed alignment tolerances, thereby overcoming the need for active alignment while maintaining the full flexibility of multi-chip integration techniques. In a proof-of-concept experiment, we demonstrate an ECL offering a 90 nm tuning range (1480 nm - 1570 nm) with on-chip output powers above 12 dBm and side-mode suppression ratios of up to 59 dB. We achieve an intrinsic linewidth of 979 Hz, which is among the lowest values reported for comparable feedback architectures. The optical loss of the intra-cavity photonic wire bond between the III-V gain element and the Si$_{3}$N$_{4}$-based tunable feedback circuit amounts to approximately (1.6 $\pm$ 0.2) dB. We use the ECL as a tunable pump laser to generate a dissipative Kerr soliton frequency comb. To the best of our knowledge, our experiments represent the first demonstration of a single-soliton Kerr comb generated with a pump that is derived from a hybrid ECL.

physics.optics↗
arXiv2022

Bandwidth and Conversion-Efficiency Analysis of Kerr Soliton Combs in Dual-Pumped Resonators with Anomalous Dispersion

Kerr frequency combs generated in high-Q microresonators offer an immense potential in many applications, and predicting and quantifying their behavior, performance and stability is key to systematic device design. Based on an extension of the Lugiato-Lefever equation we investigate in this paper the perspectives of changing the pump scheme from the well-understood monochromatic pump to a dual-tone configuration simultaneously pumping two modes. For the case of anomalous dispersion we give a detailed study of the optimal choices of detuning offsets and division of total pump power between the two modes in order to optimize single-soliton comb states with respect to performance metrics like power conversion efficiency and bandwidth. Our approach allows also to quantify the performance metrics of the optimal single-soliton comb states and determine their trends over a wide range of technically relevant parameters.

physics.optics↗
arXiv2022

3D-printed facet-attached optical elements for connecting VCSEL and photodiodes to fiber arrays and multi-core fibers

Multicore optical fibers and ribbons based on fiber arrays allow for massively parallel transmission of signals via spatially separated channels, thereby offering attractive bandwidth scaling with linearly increasing technical effort. However, low-loss coupling of light between fiber arrays or multicore fibers and standard linear arrays of vertical-cavity surface-emitting lasers (VCSEL) or photodiodes (PD) still represents a challenge. In this paper, we demonstrate that 3D-printed facet-attached microlenses (FaML) offer an attractive path for connecting multimode fiber arrays as well as individual cores of multimode multicore fibers to standard arrays of VCSEL or PD. The freeform coupling elements are printed in situ with high precision on the device and fiber facets by high-resolution multi-photon lithography. We demonstrate coupling losses down to 0.35 dB along with lateral 1 dB alignment tolerances in excess of 10 $\mu$m, allowing to leverage fast passive assembly techniques that rely on industry-standard machine vision. To the best of our knowledge, our experiments represent the first demonstration of a coupling interface that connects individual cores of a multicore fiber to VCSEL or PD arranged in a standard linear array without the need for additional fiber-based or waveguide-based fan-out structures. Using this approach, we build a 3 x 25 Gbit/s transceiver assembly which fits into a small form-factor pluggable module and which fulfills many performance metrics specified in the IEEE 802.3 standard.

physics.optics↗
arXiv2022

3D-printed facet-attached optical elements for beam shaping in optical phased arrays

We demonstrate an optical phased-array (OPA) equipped with a 3D-printed facet-attached element for shaping and deflection of the emitted beam. The beam shaper combines freeform refractive surfaces with total-internal-reflection (TIR) mirrors and is in-situ printed to edge-emitting waveguide facets using high-resolution multi-photon lithography, thereby ensuring precise alignment with respect to on-chip waveguide structures. In a proof-of-concept experiment, we achieve a grating-lobe free steering range of $\pm 30{\deg}$ and a full-width-halfmaximum (FWHM) beam divergence of approximately $2{\deg}$. The concept opens an attractive alternative to currently used grating structures and is applicable to a wide range of integration platforms.

physics.optics↗