arXiv subjects

Christian Koos

Publications and source records attributed to Christian Koos.

At least 37 records · Page 2Linked to original sources

arXiv2022

Transformation-optics modeling of 3D-printed freeform waveguides

Multi-photon lithography allows to complement planar photonic integrated circuits (PIC) by in-situ 3D-printed freeform waveguide structures. However, design and optimization of such freeform waveguides using time-domain Maxwell's equations solvers often requires comparatively large computational volumes, within which the structure of interest only occupies a small fraction, thus leading to poor computational efficiency. In this paper, we present a solver-independent transformation-optics-(TO-) based technique that allows to greatly reduce the computational effort related to modeling of 3D freeform waveguides. The concept relies on transforming freeform waveguides with curved trajectories into equivalent waveguide structures with modified material properties but geometrically straight trajectories, that can be efficiently fit into rather small cuboid-shaped computational volumes. We demonstrate the viability of the technique and benchmark its performance using a series of different freeform waveguides, achieving a reduction of the simulation time by a factor of 3-6 with a significant potential for further improvement. We also fabricate and experimentally test the simulated waveguides by 3D-printing on a silicon photonic chip, and we find good agreement between the simulated and the measured transmission at $λ= 1550 \textrm{ nm}$.

physics.optics↗

arXiv2021

Ultra-broadband polarization beam splitter and rotator based on 3D-printed waveguides

Multi-photon lithography has emerged as a powerful tool for photonic integration, allowing to complement planar photonic circuits by 3D-printed freeform structures such as waveguides or micro-optical elements. These structures can be fabricated with high precision on the facets of optical devices and lend themselves to highly efficient package-level chip-chip-connections in photonic assemblies. However, plain light transport and efficient coupling is far from exploiting the full geometrical design freedom that is offered by 3D laser lithography. Here, we extend the functionality of 3D-printed optical structures to manipulation of optical polarization states. We demonstrate compact ultra-broadband polarization beam splitters (PBS) that can be combined with polarization rotators (PR) and mode-field adapters into a monolithic 3D-printed structure, fabricated directly on the facets of optical devices. In a proof-of-concept experiment, we demonstrate measured polarization extinction ratios beyond 11 dB over a bandwidth of 350 nm at near-infrared (NIR) telecommunication wavelengths around 1550 nm. We demonstrate the viability of the device by receiving a 640 Gbit/s dual-polarization data signal using 16-state quadrature amplitude modulation (16QAM), without any measurable optical-signal-to-noise-ratio (OSNR) penalty compared to a commercial PBS.

physics.optics↗

arXiv2021

Superconducting Nanowire Single-Photon Detector (SNSPD) with 3D-Printed Free-Form Microlenses

We present an approach to increase the effective light-receiving area of superconducting nanowire single-photon detectors (SNSPD) by means of free-form microlenses that are printed in situ on top of the sensitive detector area using high-resolution multi-photon lithography. We demonstrate a detector based on a niobium-nitride (NbN) nanowire with a 4.5 $\mathrm μ$m $\times$ 4.5 $\mathrm μ$m sensitive area, supplemented with a lens of 60 $\mathrm μ$m diameter. For free-space illumination at a wavelength of 1550 nm, the lensed sensor has a 100-fold-increased effective collection area, which leads to strongly enhanced system detection efficiency without the need for long nanowires. Our approach can be readily applied to a wide range of sensor types and effectively overcomes the inherent design conflict between high counting speed due to short sensor reset time, high timing accuracy, and high fabrication yield on the one hand and high collection efficiency through large effective detection areas on the other hand.

physics.ins-det↗

arXiv2021

On-sky results for the novel integrated micro-lens ring tip-tilt sensor

We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $λ$/D in both tip and tilt, of which approximately 50% of the power originates at frequencies below 10 Hz. We show the reconstruction accuracy is highly dependent on the estimated Strehl ratio and simulations support the assumption that residual adaptive optics aberrations are the main limit to the reconstruction accuracy. We conclude that this sensor is ideally suited to remove post-adaptive optics non-common path tip tilt residuals. We discuss the next steps for the concept development, including optimizations of the lens and fiber, tuning of the correction algorithm and selection of optimal science cases.

astro-ph.IM↗

arXiv2021

3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets

By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demonstrate the potential of the instrument via initial results from the first on-sky runs at the 8.2 m Subaru Telescope with a spectrograph using off-the-shelf optics, allowing for rapid development with low cost.

astro-ph.IM↗

arXiv2021

An innovative integral field unit upgrade with 3D-printed micro-lenses for the RHEA at Subaru

In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance.

astro-ph.IM↗

arXiv2020

Hybrid Electro-Optic Modulator Combining Silicon Photonic Slot Waveguides with High-k Radio-Frequency Slotlines

Electro-optic (EO) modulators rely on interaction of optical and electrical signals with second-order nonlinear media. For the optical signal, this interaction can be strongly enhanced by using dielectric slot-waveguide structures that exploit a field discontinuity at the interface between a high-index waveguide core and the low-index EO cladding. In contrast to this, the electrical signal is usually applied through conductive regions in the direct vicinity of the optical waveguide. To avoid excessive optical loss, the conductivity of these regions is maintained at a moderate level, thus leading to inherent RC-limitations of the modulation bandwidth. In this paper, we show that these limitations can be overcome by extending the slot-waveguide concept to the modulating radio-frequency (RF) signal. Our device combines an RF slotline that relies on BaTiO3 as a high-k dielectric material with a conventional silicon photonic slot waveguide and a highly efficient organic EO cladding material. In a proof-of-concept experiment, we demonstrate a 1 mm-long Mach-Zehnder modulator that offers a 3 dB-bandwidth of 76 GHz and a 6 dB-bandwidth of 110 GHz along with a small π-voltage of 1.3 V (UπL = 1.3 V mm). To the best of our knowledge, this represents the largest EO bandwidth so far achieved with a silicon photonic modulator based on dielectric waveguides. We further demonstrate the viability of the device in a data transmission experiment using four-state pulse-amplitude modulation (PAM4) at line rates up to 200 Gbit/s. Our first-generation devices leave vast room for further improvement and may open an attractive route towards highly efficient silicon photonic modulators that combine sub-1 mm device lengths with sub-1 V drive voltages and modulation bandwidths of more than 100 GHz.

physics.app-ph↗

arXiv2020

Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit

Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact and easy to integrate into current and future direct imaging instruments for exoplanet characterization. This achieved by making use of recent progress in photonic manufacturing to create a single-mode fiber-fed image reformatter. The fiber-link is created with 3D printed lenses on top of a single-mode multi-core fiber that feeds an ultrafast laser inscribed photonic chip that reformats the fiber into a pseudo-slit. We then couple it to a first-order spectrograph with a triple stacked volume phase holographic grating for a high efficiency over a large bandwidth. The prototype system has had a successful first-light observing run at the 4.2 meter William Herschel Telescope. The measured on-sky resolving power is between 2500 and 3000, depending on the wavelength. With our observations we show that single-mode integral-field spectroscopy is a viable option for current and future exoplanet imaging instruments.

astro-ph.IM↗

arXiv2020

Mode-locked laser timing jitter limitation in optically enabled, spectrally sliced ADCs

Novel analog-to-digital converter (ADC) architectures are motivated by the demand for rising sampling rates and effective number of bits (ENOB). The main limitation on ENOB in purely electrical ADCs lies in the relatively high jitter of oscillators, in the order of a few tens of fs for state-of-the-art components. When compared to the extremely low jitter obtained with best-in-class Ti:sapphire mode-locked lasers (MLL), in the attosecond range, it is apparent that a mixed electrical-optical architecture could significantly improve the converters' ENOB. We model and analyze the ENOB limitations arising from optical sources in optically enabled, spectrally sliced ADCs, after discussing the system architecture and implementation details. The phase noise of the optical carrier, serving for electro-optic signal transduction, is shown not to propagate to the reconstructed digitized signal and therefore not to represent a fundamental limit. The optical phase noise of the MLL used to generate reference tones for individual slices also does not fundamentally impact the converted signal, so long as it remains correlated among all the comb lines. On the other hand, the timing jitter of the MLL, as also reflected in its RF linewidth, is fundamentally limiting the ADC performance, since it is directly mapped as jitter to the converted signal. The hybrid nature of a photonically enabled, spectrally sliced ADC implies the utilization of a number of reduced bandwidth electrical ADCs to convert parallel slices, resulting in the propagation of jitter from the electrical oscillator supplying their clock. Due to the reduced sampling rate of the electrical ADCs, as compared to the overall system, the overall noise performance of the presented architecture is substantially improved with respect to a fully electrical ADC.

eess.SP↗

arXiv2020

Silicon-Organic Hybrid (SOH) Mach-Zehnder Modulators for 100 GBd PAM4 Signaling With Sub-1 dB Phase-Shifter Loss

We report on compact and efficient silicon-organic hybrid (SOH) Mach-Zehnder modulators (MZM) with low phase shifter insertion loss of 0.7 dB. The 280 $μ$m-long phase shifters feature a $π$-voltage-length product of 0.41 Vmm and a loss-efficiency product as small as $aU_πL = 1.0\space\rm{VdB}$. The device performance is demonstrated in a data transmission experiment, where we generate on-off-keying (OOK) and four-level pulse-amplitude modulation (PAM4) signals at symbol rates of 100 GBd, resulting in line rates of up to 200 Gbit/s. Bit error ratios are below the threshold for hard-decision forward error correction (HD-FEC) with 7 % coding overhead, leading to net data rates of 187 Gbit/s. This is the highest PAM4 data rate ever achieved for a sub-1 mm silicon photonic MZM.

physics.app-ph↗

arXiv2019

Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring

Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam drifts and higher-frequency tip-tilt aberrations caused by telescope mechanics and vibrations. These residual aberrations are not always sensed and corrected by the AO system, leading to unacceptable losses. This is particularly severe for the Extremely Large Telescopes, where their huge structure will mean vibrations increase and optimal AO solutions are even more difficult to implement. We have created a focal plane sensor to correct for residual aberrations by surrounding the SMF with six Multi-mode fibers (MMFs). On each of the MMFs sits a printed freeform lens, making up a six-element micro-lens ring to refract the light into these surrounding MMFs and thus minimizing light loss in the gap between the fiber cores. This means when the beam is near diffraction limited and centered almost all light couples to the SMF. When the beam is misaligned, it couples to the surrounding cores, which are read out by a detector and processed by the DARC software driving a tip-tilt mirror. Currently we are aiming to detect and correct only tip-tilt aberrations. However, choosing to surround the central fiber with six sensing locations potentially allows us to investigate higher order correction modes. Here we present the design and performance our prototype system. This has been designed for use with the iLocater fiber injection system at the LBT and can easily be scaled to larger telescopes. We present test results from the KOOL laboratory and initial integration with the iLocater instrument.

astro-ph.IM↗

arXiv2019

Hardwire-Configurable Photonic Integrated Circuits Enabled by 3D Nano-Printing

Photonic integrated circuits (PIC) currently rely on application-specific designs that are geared towards a particular functionality. Development of such application-specific PIC requires considerable effort and often involves several design, fabrication, and characterization iterations, each with cycle times of several months, to reach acceptable performance. At the same time, the number of chips that is eventually needed to serve a certain application is often too small to benefit from the scalability of advanced photonic integration platforms. As a consequence, large-scale photonic integration has hitherto been unable to unfold its full economic advantages within the highly fragmented application space of photonics. Here we introduce a novel approach to configurable PIC that can overcome these challenges. The concept exploits generic PIC designs consisting of standard building blocks that can be concatenated to provide an application-specific functionality. Configuration of the PIC relies on establishing hardwired optical connections between suitable ports of an optical wire board using highly flexible 3D direct-write laser lithography. Hardwire-configurable PIC allow to exploit high-throughput production of generic chips in large-scale fabrication facilities for serving a wide variety of applications with small or medium volumes of specifically configured devices.

physics.app-ph↗

arXiv2019

A verified equivalent-circuit model for slotwaveguide modulators

We formulate and experimentally validate an equivalent-circuit model based on distributed elements to describe the electric and electro-optic (EO) properties of travellingwave silicon-organic hybrid (SOH) slot-waveguide modulators. The model allows to reliably predict the small-signal EO frequency response of the modulators exploiting purely electrical measurements of the frequency-dependent RF transmission characteristics. We experimentally verify the validity of our model, and we formulate design guidelines for an optimum trade-off between optical loss due to free-carrier absorption (FCA), electro-optic bandwidth, and π-voltage of SOH slot-waveguide modulators.

physics.app-ph↗

arXiv2019

Lasing in $\mathrm{Si}_3\mathrm{N}_4$-organic hybrid (SiNOH) waveguides

Lasers that operate in the visible wavelength range and can be easily integrated on a chip together with photonic integrated circuits are of particular interest for biophotonic applications. We present a new class of laser sources that emit at 600 nm wavelength and can be efficiently integrated on the $\mathrm{Si}_3\mathrm{N}_4$ platform using low-cost fabrication techniques. The $\mathrm{Si}_3\mathrm{N}_4$-organic hybrid lasers are optically pumped from top without the need of a precise alignment. We investigate different laser geometries based on spiral shaped ring resonators and distributed feedback resonators. We discuss the laser properties with a focus on their application in the field of bioscience.

physics.optics↗

arXiv2019

Coherent WDM transmission using quantum-dash mode-locked laser diodes as multi-wavelength source and local oscillator

Quantum-dash (QD) mode-locked laser diodes (MLLD) lend themselves as chip-scale frequency comb generators for highly scalable wavelength-division multiplexing (WDM) links in future data-center, campus-area, or metropolitan networks. Driven by a simple DC current, the devices generate flat broadband frequency combs, containing tens of equidistant optical tones with line spacings of tens of GHz. Here we show that QD-MLLDs can not only be used as multi-wavelength light sources at a WDM transmitter, but also as multi-wavelength local oscillators (LO) for parallel coherent reception. In our experiments, we demonstrate transmission of an aggregate data rate of 4.1 Tbit/s (23x45 GBd PDM-QPSK) over 75 km standard single-mode fiber (SSMF). To the best of our knowledge, this represents the first demonstration of a coherent WDM link that relies on QD-MLLD both at the transmitter and the receiver.

physics.app-ph↗

arXiv2019

Electrically packaged silicon-organic hybrid (SOH) I/Q-modulator for 64 GBd operation

Silicon-organic hybrid (SOH) electro-optic (EO) modulators combine small footprint with low operating voltage and hence low power dissipation, thus lending themselves to on-chip integration of large-scale device arrays. Here we demonstrate an electrical packaging concept that enables high-density radio-frequency (RF) interfaces between on-chip SOH devices and external circuits. The concept combines high-resolution $\mathrm{Al_2O_3}$ printed-circuit boards with technically simple metal wire bonds and is amenable to packaging of device arrays with small on-chip bond pad pitches. In a set of experiments, we characterize the performance of the underlying RF building blocks and we demonstrate the viability of the overall concept by generation of high-speed optical communication signals. Achieving line rates (symbols rates) of 128 Gbit/s (64 GBd) using quadrature-phase-shiftkeying (QPSK) modulation and of 160 Gbit/s (40 GBd) using 16-state quadrature-amplitudemodulation (16QAM), we believe that our demonstration represents an important step in bringing SOH modulators from proof-of-concept experiments to deployment in commercial environments.

physics.app-ph↗

arXiv2019

Generalized Kramers-Kronig Receiver for Coherent THz Communications

High-speed communication systems rely on spectrally efficient modulation formats that encode information both on the amplitude and on the phase of an electromagnetic carrier. Coherent detection of such signals typically uses rather complex receiver schemes, requiring a continuous-wave (c.w.) local oscillator (LO) as a phase reference and a mixer circuit for spectral down-conversion. In optical communications, the so-called Kramers-Kronig (KK) scheme has been demonstrated to greatly simplify the receiver, reducing the hardware to a single photodiode. In this approach, an LO tone is transmitted along with the signal, and the amplitude and phase of the complex signal envelope are reconstructed from the photocurrent by digital signal processing. This reconstruction exploits the fact that the real and the imaginary part, or, equivalently, the amplitude and the phase of an analytic signal are connected by a KK-type relation. Here, we transfer the KK scheme to high-speed wireless communications at THz carrier frequencies. We use a Schottky-barrier diode (SBD) as a nonlinear element and generalize the theory of KK processing to account for the non-quadratic characteristics of this device. Using 16-state quadrature amplitude modulation (16QAM), we transmit a net data rate of 115 Gbit/s at a carrier frequency of 0.3 THz over a distance of 110 m.

physics.app-ph↗

arXiv2019

OSNR limitations of chip-based optical frequency comb sources for WDM coherent communications

Optical frequency combs have the potential to become key building blocks of optical communication subsystems. The strictly equidistant, narrow-band spectral lines of a frequency comb can serve both as carriers for massively parallel data transmission and as local oscillator for coherent reception. Recent experiments have demonstrated the viability of various chip-based comb generator concepts for communication applications, offering transmission capacities of tens of Tbit/s. Here, we investigate the influence of the comb line power and of the carrier-to-noise power ratio on the performance of a frequency comb in a WDM system. We distinguish two regimes of operation depending on whether the comb source or the transmission link limits the performance of the system, i.e., defines the link reach, restricts the choice of modulation format and sets the maximum symbol rate. Finally, we investigate the achievable OSNR and channel capacity when using the tones of a soliton Kerr frequency comb as multi-wavelength carriers for WDM systems.

eess.SP↗