arXiv subjects

Christian Seassal

Publications and source records attributed to Christian Seassal.

At least 19 recordsLinked to original sources

arXiv2026

All-optical programming of polarization singularities in a photonic-crystal laser

Singular optics has emerged as an important research area with diverse applications, yet controlling optical singularities in nanophotonic emitters remains largely constrained by the fixed subwavelength geometry of optical resonators. Here, we circumvent this limitation and demonstrate all-optical programming of real-space polarization singularities in a photonic-crystal laser, while preserving a momentum-space vortex inherited from a symmetry-protected bound state in the continuum. The principle is to use a shaped optical pump to create a smooth mesoscopic potential, whose spatial variations are slow compared with the lattice period. This potential localizes a negative-mass Bloch band into trapped lasing states whose envelope functions, and therefore far-field singularity textures, are defined by the pump geometry. Using a honeycomb photonic crystal supporting a symmetry-protected bound state in the continuum, we achieve room-temperature telecom-band lasing with real-space polarization singularities pinned to the critical points of the envelope function, where its gradient vanishes, and reconfigurable in number and position by pump shaping, while the intrinsic momentum-space singularity at the $\Gamma$ point remains fixed. The experimental observations agree quantitatively with an analytical framework combining the Bloch mode of the photonic crystal with envelope-function theory, establishing optical envelope engineering as a route to programmable structured emission from active photonic lattices.

physics.optics↗

arXiv2026

Multi-wavelength UV Upconversion in Lanthanides assisted by Photonic Crystals

Upconversion luminescence consists of the absorption of low-energies photons followed by the emission of a higher energy photon. The process has mainly been studied in lanthanides to upconvert monochromatic near-infrared excitation to near-infrared or visible light, and has been exploited only to a limited extent to upconvert broad excitations to ultra-violet. In addition, upconverting near-infrared and visible light to ultra-violet is crucial for applications such as solar-to-fuel conversion or environmental remediation. However, upconversion luminescence is limited by the low absorption cross-sections of lanthanides. In this work, we engineered Bloch modes in a photonic crystal to assist a multi-wavelength upconversion mechanism and demonstrated a 28-fold enhancement of ultra-violet upconversion luminescence of Yb3+-Tm3+ doped thin films. Materials were selected and optimized to design nanostructures without parasitic absorption losses. The geometric parameters of the photonic crystals were scanned to match a slow-light resonance with an excited-state transition of Tm3+ and thus enhance incident visible light absorption. Ultra-violet light extraction was also enhanced by photonic crystal Bloch modes. Each of these two contributions were quantified and the measured photonic band structures were well reproduced by electromagnetic simulations.

physics.optics↗

arXiv2025

Homogeneous All-Inorganic Perovskite Films via High-Pressure Recrystallization

Metal halide perovskites are promising materials for optoelectronic applications owing to their outstanding optical and electronic properties. Among them, all-inorganic perovskites such as CsPbBr$_3$ offer superior thermal and chemical stability. However, obtaining high-quality CsPbBr$_3$ thin films via solution processing remains challenging due to the precursor's low solubility, and current additive or solvent engineering strategies are often complex and poorly reproducible. High-pressure recrystallization has recently emerged as a promising route to improve film quality, yet its impact on film properties remains insufficiently explored. Here, we systematically investigate the morphological, structural, and optical properties of CsPbBr$_3$ thin films prepared by high-pressure recrystallization, in comparison with standard non-recrystallized films. Optimized recrystallization at 300 bar produces smooth, pinhole-free, single-phase 3D perovskite layers with sub-nanometer roughness, while the film thickness is precisely tunable via precursor concentration. The process enhances both grain and crystallite sizes, leading to amplified spontaneous emission with a reduced excitation threshold and improved photostability. Temperature-dependent X-ray diffraction further reveals the orthorhombic--tetragonal--cubic phase transition, consistent with single-crystal behavior. This study provides fundamental insights into pressure-driven recrystallization and establishes a reproducible, scalable approach for fabricating high-quality CsPbBr$_3$ films for optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Long-range ballistic propagation of 80$\%$-excitonic-fraction polaritons in a perovskite metasurface at room temperature

Exciton-polaritons, hybrid light-matter elementary excitations arising from the strong coupling regime between excitons in semiconductors and photons in photonic nanostructures, offer a fruitful playground to explore the physics of quantum fluids of light as well as to develop all-optical devices. However, achieving room temperature propagation of polaritons with a large excitonic fraction, which would be crucial, e.g., for nonlinear light transport in prospective devices, remains a significant challenge. } Here we report on experimental studies of exciton-polariton propagation at room temperature in resonant metasurfaces made from a sub-wavelength lattice of perovskite pillars. Thanks to the large Rabi splitting, an order of magnitude larger than the optical phonon energy, the lower polariton band is completely decoupled from the phonon bath of perovskite crystals. The long lifetime of these cooled polaritons, in combination with the high group velocity achieved through the metasurface design, enables long-range propagation regardless of the polariton excitonic fraction. Remarkably, we observed propagation distances exceeding hundreds of micrometers at room temperature, even when the polaritons possess a very high excitonic component, approximately {80}$\%$. Furthermore, the design of the metasurface introduces an original mechanism for directing uni-directional propagation through polarization control. This discovery of a ballistic propagation mode, leveraging high-speed cooled polaritons, heralds a promising avenue for the development of advanced polaritonic devices.

cond-mat.mes-hall↗

arXiv2024

Nanoimprinted Exciton-Polaritons Metasurfaces: Cost-Effective, Large-Scale, High Homogeneity, and Room Temperature Operation

Exciton-polaritons represent a promising platform that combines the strengths of both photonic and electronic systems for future optoelectronic devices. However, their application is currently limited to laboratory research due to the high cost and complexity of fabrication methods, which are not compatible with the mature CMOS technology developed for microelectronics. In this work, we develop an innovative, low-cost, and CMOS-compatible method for fabricating large surface polaritonic devices. This is achieved by direct patterning of a halide-perovskite thin film via thermal nanoimprint. As a result, we observe highly homogeneous polaritonic modes of quality factor $Q\approx 300$ at room temperature across a centimetric scale. Impressively, the process provides high reproducibility and fidelity, as the same mold can be reused more than 10 times to imprint the perovskite layer on different types of substrates. Our results could pave the way for the production of low-cost integrated polaritonic devices operating at room temperature.

physics.optics↗

arXiv2023

Direct Observation of Exceptional Points in Photonic Crystal by Cross-Polarization Imaging in Momentum Space

This study explores exceptional points (EPs) in photonic crystals (PhCs) and introduces a novel method for their single-shot observation. Exceptional points are spectral singularities found in non-Hermitian systems, such as leaky PhC slabs. However, directly observing EPs in PhC systems using regular reflectivity spectroscopy is a considerable challenge due to interference between guided resonances and background signals. In this work, we present a simple, nondestructive technique that employs crossed polarizations to directly observe EPs in momentum-resolved resonant scattering. This approach effectively suppresses the background signal, enabling exclusive probing of the guided resonances where EPs manifest. Our results demonstrate the formation of EPs in both energy-momentum mapping and isofrequency imaging. All experimental findings align seamlessly with numerical simulations and analytical models. Our approach holds great potential as a robust tool for studying non-Hermitian physics in PhC platform.

physics.optics↗

arXiv2022

Taming Friedrich-Wintgen interference in resonant metasurface: vortex laser emitting at on-demand tilted-angle

Friedrich-Wintgen (FW) interference is an atypical coupling mechanism that grants loss exchange between leaky resonances in non-Hermitian classical and quantum systems. Intriguingly, such an mechanism makes it possible for destructive interference scenario in which a radiating wave becomes a bound state in the continuum (BIC) by giving away all of its losses. Here we propose and demonstrate experimentally an original concept to tailor FW-BICs as polarization singularity at on-demand wavevectors in optical metasurface. As a proof-of-concept, using hybrid organic-inorganic halide perovskite as active material, we empower this novel polarization singularity to obtain lasing emission exhibiting both highly directional emission at oblique angles and polarization vortex in momentum space. Our results pave the way to steerable coherent emission with tailored polarization pattern for applications in optical communication/manipulation in free-space, high-resolution imaging /focusing and data storage.

physics.optics↗

arXiv2022

Light Management in Perovskite Photovoltaic Solar Cells: a perspective

Light Management (LM) is essential for metal-halide perovskite solar cells in their race for record performance. In this review, criteria on materials, processes and photonic engineering are established such as to enhance mainly the short circuit current density, towards high energy yields. These criteria are used to analyse a large panel of solutions envisaged in the literature for single junction cells. Moreover, a perspective based on rigorous electromagnetic simulations performed on various comparable structures is proposed in order to clarify the conclusions, and to pave the way to further performance enhancement in the case of all-perovskite, two-terminal tandem cells.

physics.optics↗

arXiv2021

Realization of room temperature polaritonic vortex in momentum space with hybrid Perovskite metasurface

Exciton-polaritons are mixed light-matter excitations that result from the strong coupling regime between an active excitonic material and photonic resonances. Harnessing these hybrid excitations provides a rich playground to explore fascinating fundamental features, such as out-of-equilibrium Bose-Einstein condensation and quantum fluids of light, as well as novel mechanisms to be exploited in optoelectronic devices. Here, we investigate experimentally the formation of exciton-polaritons arising from the mixing between hybrid inorganic-organic perovskite excitons and an optical Bound state In a Continuum (BIC) of a subwavelength-scale metasurface, at room temperature. These polaritonic eigenmodes, hereby called polariton BICs (pol-BICs) are revealed in both reflectivity, resonant scattering, and photoluminescence measurements. Although pol-BICs only exhibit a finite quality factor that is bounded by the non-radiative losses of the excitonic component, they fully inherit BIC peculiar features: a full uncoupling from the radiative continuum in the vertical direction, which is associated to a locally vanishing farfield radiation in momentum space. Most importantly, our experimental results confirm that the topological nature of the photonic BIC is perfectly transferred to the pol-BIC. This is evidenced with the observation of a polarization vortex in the farfield of polaritonic emission. Our results pave the way to engineer BIC physics of interacting bosons, as well as novel room temperature polaritonic devices.

physics.optics↗

arXiv2020

Directing random lasing emission using cavity exciton-polaritons

Random lasing is an intriguing phenomenon occurring in disordered structures with optical gain. In such lasers, the scattering of light provides the necessary feedback for lasing action. Because of the light scattering, the random lasing systems emit in all the directions in contrast with the directional emission of the conventional lasers. While this property can be desired in some cases, the control of the emission directionality remains required for most of the applications. Besides, it is well known that the excitation of cavity exciton-polaritons is intrinsically directional. Each wavelength (energy) of the cavity polariton, which is a superposition of an excitonic state and a cavity mode, corresponds to a well-defined propagation direction. We demonstrate in this article that coupling the emission of a 2D random laser with a cavity polaritonic resonance permits to control the direction of emission of the random laser. This results in a directional random lasing whose emission angle with respect to the microcavity axis can be tuned in a large range of angles by varying the cavity detuning. The emission angles reached experimentally in this work are 15.8$^\circ$ and 22.4$^\circ$.

physics.optics↗

arXiv2020

Tailoring dispersion of room temperature exciton-polaritons with perovskite-based subwavelength metasurfaces

Exciton-polaritons, elementary excitations arising from the strong coupling regime between photons and excitons in insulators or semiconductors, represent a promising platform for studying quantum fluids of light and realizing prospective all-optical devices. Among different materials for room temperature polaritonic devices, two-dimensional (2D) layered perovskites have recently emerged as one of the promising candidates thanks to their prominent excitonic features at room temperature. Here we report on the experimental demonstration of exciton-polaritons at room temperature in resonant metasurfaces made from a subwavelength 2D lattice of perovskite pillars. These metasurfaces are obtained via spincoating, followed by crystallization of the perovskite solution in a pre-patterned glass backbone. The strong coupling regime is revealed by both angular-resolved reflectivity and photoluminescence measurements, showing anticrossing between photonic modes and the exciton resonance with a Rabi splitting in the 200 meV range. Moreover, we show that the polaritonic dispersion can be engineered by tailoring the photonic Bloch mode to which perovskite excitons are coupled. Linear, parabolic, and multi-valley polaritonic dispersions are experimentally demonstrated. All of our results are perfectly reproduced by both numerical simulations based on a rigorous coupled wave analysis and an elementary model based on a quantum theory of radiation-matter interaction. Our results suggest a new approach to study exciton-polaritons and pave the way towards large-scale and low-cost integrated polaritonic devices operating at room temperature.

physics.optics↗

arXiv2019

Unified Weak-to-Strong Coupling Transitions and Radiation Interference Induced by Vertical-Symmetry Breaking in Photonic Crystal Slabs

Vertical-symmetry breaking provides a versatile means of coupling leaky photonic-crystal resonances that are otherwise protected by opposite out-of-plane parity. Here, we develop a unified two-mode framework for the weak-to-strong coupling transition induced by vertical-symmetry breaking in photonic crystal slabs. The symmetry-breaking perturbation simultaneously generates a near-field coherent coupling and modifies the overlap of the radiation channels of the two parent resonances. Their interplay drives the transition from frequency crossings to avoided crossings through an exceptional point (EP), while also governing radiative linewidth exchange through Friedrich-Wintgen interference. Using a radiation-vector description resolved into the upper and lower half-spaces, we show that total radiation cancellation and one-sided radiation cancellation correspond, respectively, to quasi-bound states in the continuum (quasi-BIC) and quasi-unidirectional guided resonances (quasi-UGR). This framework distinguishes the spectral condition for EP formation from the far-field conditions controlling linewidth suppression and directional emission. We validate this picture numerically and experimentally in square-lattice photonic crystal slabs. Tuning the superstrate index drives a weak-to-strong coupling transition through an EP, while partial etching yields a broad off-$\Gamma$ quasi-BIC regime with strongly asymmetric top and bottom radiation. We further apply the same radiation-vector framework to a laterally shifted bilayer grating, where quasi-BICs and quasi-UGR emerge along a continuous symmetry-breaking pathway. These results establish vertical-symmetry breaking as a general route for controlling hybridization, radiation interference, and directional leakage in photonic crystal slabs.

physics.optics↗

arXiv2018

Room temperature cavity polaritons with 3D hybrid perovskite - Towards low-cost polaritonic devices

Hybrid halide perovskites are now considered as low-cost materials for contemporary research in photovoltaics and nanophotonics. In particular, because these materials can be solution processed, they represent a great hope for obtaining low-cost devices. While the potential of 2D layered hybrid perovskites for polaritonic devices operating at room temperature has been demonstrated in the past, the potential of the 3D perovskites has been much less explored for this particular application. Here, we report the strong exciton-photon coupling with 3D bromide hybrid perovskite. Cavity polaritons are experimentallly demonstrated from both reflectivity and photoluminescence experiments, at room temperature, in a 3$λ$/2 planar microcavity containing a large surface spin-coated $CH_3NH_3PbBr_3$ thin film. A microcavity quality factor of 92 was found and a large Rabi splitting of 70 meV was measured. This result paves the way to low-cost polaritonic devices operating at room temperature, potentially electrically injectable as 3D hybrid perovskites present good transport properties.

physics.optics↗

arXiv2017

Symmetry Breaking in Photonic Crystals: On-Demand Dispersion from Flatband to Dirac Cones

We demonstrate that symmetry breaking opens a new degree of freedom to tailor the energy-momentum dispersion in photonic crystals. Using a general theoretical framework in two illustrative practical structures, we show that breaking symmetry enables an on-demand tuning of the local density of states of a same photonic band from zero (Dirac cone dispersion) to infinity (flatband dispersion), as well as any constant density over an adjustable spectral range. As a proof-of-concept, we experimentally demonstrate the transformation of a very same photonic band from conventional quadratic shape to Dirac dispersion, flatband dispersion and multivaley one, by finely tuning the vertical symmetry breaking. Our results provide an unprecedented degree of freedom for optical dispersion engineering in planar integrated photonic devices.

physics.optics↗

arXiv2014

Inhibition of light emission in a 2.5D photonic structure

We analyse inhibition of emission in a 2.5D photonic structures made up a photonic crystal (PhC) and Bragg mirrors using FDTD simulations. A comparison is made between an isolated PhC membrane and the same PhC suspended onto a Bragg mirror or sandwiched between 2 Bragg mirrors. Strong inhibition of the Purcell factor is observed in a broad spectral range, whatever the in-plane orientation and location of the emitting dipole. We analysed these results numerically and theoretically by simulating the experimentally observed lifetime of a collection of randomly distributed emitters, showing that their average emission rate is decreased by more than one decade, both for coupled or isolated emitters.

physics.optics↗

arXiv2014

Absorption enhancement in photonic crystal thin films by pseudo disordered perturbations

The effects resulting from the introduction of a controlled perturbation in a single pattern membrane on its absorption are first studied and then analyzed on the basis of band folding considerations. The interest of this approach for photovoltaic applications is finally demonstrated by overcoming the integrated absorption of an optimized single pattern membrane through the introduction of a proper pseudo disordered perturbation.

physics.optics↗

arXiv2014

Blue light absorption enhancement based on vertically channelling modes in nano-holes arrays

We investigate the specific optical regime occurring at short wavelengths, in the high absorption regime, in silicon thin-films patterned by periodically arranged nano-holes. Near-field scanning optical microscopy indicates that the incoming light is coupled to vertically channelling modes. Optical modelling and simulations show that the light, travelling inside the low-index regions, is absorbed at the direct vicinity of the nano-holes sidewalls. This channelling regime should be taken into account for light management in optoelectronic devices.

physics.optics↗

arXiv2013

Down Converter Device Combining Rare-Earth Doped Thin Layer and Photonic Crystal for c-Si Based Solar Cell

The aim of the study is to develop ultra-compact structures enabling an efficient conversion of single high energy photon (UV) to two lower energy photons (IR). The proposed structure combines rare-earths doped thin layer allowing the down-conversion process with a photonic crystal (PhC), in order to control and enhance the down-conversion using optical resonances. On the top of the rare-earths doped layer, a silicon nitride (SiN) 2D planar PhC is synthesized. For that, SiN is first deposited by PECVD. After holographic lithography and reactive ion etching, a periodic square lattice of holes is generated on the SiN layer. The PhC topographical parameters as well as the layers thickness are optimized using Finite-Difference-Time-Domain simulations. The design and realization of such PhC-assisted down-converter structures is presented. Optical simulations demonstrate that the PhC leads to the establishment of resonant modes located in the underneath doped layer, allowing a drastic enhancement of the absorption of the rare-earth ions without disturbing the transmission in the visible and near-IR parts of the spectrum, hence demonstrating the relevance of such an approach.

physics.optics↗