arXiv subjects

Christine Silberhorn

Publications and source records attributed to Christine Silberhorn.

At least 55 records · Page 3Linked to original sources

arXiv2024

Self-guided tomography of time-frequency qudits

High-dimensional time-frequency encodings have the potential to significantly advance quantum information science; however, practical applications require precise knowledge of the encoded quantum states, which becomes increasingly challenging for larger Hilbert spaces. Self-guided tomography (SGT) has emerged as a practical and scalable technique for this purpose in the spatial domain. Here, we apply SGT to estimate time-frequency states using a multi-output quantum pulse gate. We achieve fidelities of more than 99\% for 3- and 5-dimensional states without the need for calibration or post-processing. We demonstrate the robustness of SGT against statistical and environmental noise, highlighting its efficacy in the photon-starved regime typical of quantum information applications.

quant-ph↗

arXiv2024

Cryogenic Feedforward of a Photonic Quantum State

Modulation conditioned on measurements on entangled photonic quantum states is a cornerstone technology of optical quantum information processing. Performing this task with low latency requires combining single-photon-level detectors with both electronic logic processing and optical modulation in close proximity. In the technologically relevant telecom wavelength band, detection of photonic quantum states is best performed with high-efficiency, low-noise, and high-speed detectors based on the photon-induced breakdown of superconductivity. Therefore, using these devices for feedforward requires mutual compatibility of all components under cryogenic conditions. Here, we demonstrate low-latency feedforward using a quasi-photon-number-resolved measurement on a quantum light source. Specifically, we use a multipixel superconducting nanowire single-photon detector, amplifier, logic, and an integrated electro-optic modulator in situ below 4K. We modulate the signal mode of a spontaneous parametric down-conversion source, conditional on a photon-number measurement of the idler mode, with a total latency of (23+/-3)ns. The photon-number discrimination actively manipulates the signal mode photon statistics, which is itself a central component in photonic quantum computing reliant on heralded single-photon sources. This represents an important benchmark for the fastest quantum photonic feedforward experiments comprising measurement, amplification, logic and modulation. This has direct applications in quantum computing, communication, and simulation protocols.

quant-ph↗

arXiv2024

Programmable time-frequency mode-sorting of single photons with a multi-output quantum pulse gate

We demonstrate a high-dimensional mode-sorter for single photons based on a multi-output quantum pulse gate, which we can program to switch between different temporal-mode encodings including pulse modes, frequency bins, time bins, and their superpositions. This device can facilitate practical realizations of quantum information applications such as high-dimensional quantum key distribution, and thus enables secure communication with enhanced information capacity. We characterize the mode-sorter through a detector tomography in 3 and 5 dimensions and find a fidelity up to $0.958\pm 0.030$ at the single-photon level.

quant-ph↗

arXiv2024

Surface-near domain engineering in multi-domain x-cut lithium niobate tantalate mixed crystals

Lithium niobate and lithium tantalate are among the most widespread materials for nonlinear, integrated photonics. Mixed crystals with arbitrary Nb-Ta ratios provide a new degree of freedom to tune materials properties, such as the birefringence, but also leverage the advantages of the singular compounds, for example, by combining the thermal stability of lithium tantalate with the larger nonlinear or piezoelectric constants of lithium niobate. Periodic poling is the prerequisite for any nonlinear optical application. For mixed crystals this has been challenging so far due to the lack of homogeneous, mono-domain crystals, which severely inhibit domain growth and nucleation. In this work we demonstrate that surface-near ($< 1$~$μ$m depth) periodic poling on x-cut lithium niobate tantalate mixed crystals can be achieved via electric field poling and lithographically structured electrodes. We find that naturally occurring head-to-head or tail-to-tail domain walls in the as-grown crystal inhibit domain inversion at a larger scale. However, periodic poling is possible, if the gap size between the poling electrodes is of the same order of magnitude or smaller than the average size of naturally occurring domains. This work provides the basis for the nonlinear optical application of lithium niobate tantalate mixed crystals.

physics.optics↗

arXiv2024

Experimental retrieval of photon statistics from click detection

We utilize click-counting theory for the reconstruction of photon statistics. Our approach employs an analytic pseudo-inversion method to estimate photon counts from measured click counts. A reconfigurable time-bin multiplexing, click-counting detector is set up that renders it possible to alter the photon-number resolution as needed. A detector tomography is carried out, yielding vital measurement features, such as quantum efficiencies, cross-talk rates, etc. We gauge the success of the pseudo-inversion by applying the Mandel and binomial parameters, resulting in an additional interpretation of these parameters for the discrimination of distinct quantum statistics. In addition, we apply a loss deconvolution technique to account for detection losses.

quant-ph↗

arXiv2024

Ultra-broadband non-degenerate guided-wave bi-photon source in the near and mid-infrared

The latest applications in ultrafast quantum metrology require bright, broadband bi-photon sources with one of the photons in the mid-infrared and the other in the visible to near infrared. However, existing sources based on bulk crystals are limited in brightness due to the short interaction length and only allow for limited dispersion engineering. Here, we present an integrated PDC source based on a Ti:LiNbO$_3$ waveguide that generates broadband bi-photons with central wavelengths at $860\,\mathrm{nm}$ and $2800\,\mathrm{nm}$. Their spectral bandwidth exceeds $25\,\mathrm{THz}$ and is achieved by simultaneous matching of the group velocities and cancellation of group velocity dispersion for the signal and idler field. We provide an intuitive understanding of the process by studying our source's behaviour at different temperatures and pump wavelengths, which agrees well with simulations.

quant-ph↗

arXiv2024

Pulse characterization at the single-photon level through chronocyclic $Q$-function measurements

The characterization of the complex spectral amplitude that is, the spectrum and spectral phase, of single-photon-level light fields is a crucial capability for modern photonic quantum technologies. Since established pulse characterisation techniques are not applicable at low intensities, alternative approaches are required. Here, we demonstrate the retrieval of the complex spectral amplitude of single-photon-level light pulses through measuring their chronocyclic $Q-$function. Our approach draws inspiration from quantum state tomography by exploiting the analogy between quadrature phase space and time-frequency phase space. In the experiment, we perform time-frequency projections with a quantum pulse gate, which directly yield the chronocyclic $Q-$function. We evaluate the data with maximum likelihood estimation, which is the established technique for quantum state tomography. This yields not only an unambigious estimate of the complex spectral amplitude of the state under test that does not require any \textit{a priori} information, but also allows for, in principle, estimating the spectral-temporal coherence properties of the state. Our method accurately recovers features such as jumps in the spectral phase and is resistant against regions with zero spectral intensity, which makes it immediately beneficial also for classical pulse characterization problems.

quant-ph↗

arXiv2024

Photonic Entanglement and Polarization Nonclassicality: Two Manifestations, One Nature

We demonstrate in theory and experiment the strict equivalence between nonclassical polarization and the entanglement of indistinguishable photons, thereby unifying these two phenomena that appear dissimilar at first sight. This allows us to analyze nonclassicality and multi-photon entanglement within the same framework. We experimentally verify this double-sided form of quantumness and its independence from the polarization basis, contrasting other notions of coherence that are highly basis-dependent. Our findings show how nonclassical polarization turns out to be equally resourceful for quantum protocols as entanglement, emphasizing its importance in practical applications.

quant-ph↗

arXiv2024

Certifying the Topology of Quantum Networks: Theory and Experiment

Distributed quantum information in networks is paramount for global secure quantum communication. Moreover, it finds applications as a resource for relevant tasks, such as clock synchronization, magnetic field sensing, and blind quantum computation. For quantum network analysis and benchmarking of implementations, however, it is crucial to characterize the topology of networks in a way that reveals the nodes between which entanglement can be reliably distributed. Here, we demonstrate an efficient scheme for this topology certification. Our scheme allows for distinguishing, in a scalable manner, different networks consisting of bipartite and multipartite entanglement sources. It can be applied to semi-device independent scenarios also, where the measurement devices and network nodes are not well characterized and trusted. We experimentally demonstrate our approach by certifying the topology of different six-qubit networks generated with polarized photons, employing active feed-forward and time multiplexing. Our methods can be used for general simultaneous tests of multiple hypotheses with few measurements, being useful for other certification scenarios in quantum technologies.

quant-ph↗

arXiv2024

Women for Quantum -- Manifesto of Values

Data show that the presence of women in quantum science is affected by a number of detriments and their percentage decreases even further for higher positions. Beyond data, from our shared personal experiences as female tenured quantum physics professors, we believe that the current model of scientific leadership, funding, and authority fails to represent many of us. It is time for a real change that calls for a different kind of force and for the participation of everyone. Women for quantum calls for a joint effort and aims with this initiative to contribute to such a transformation.

physics.soc-ph↗

arXiv2024

Orchestrating time and color: a programmable source of high-dimensional entanglement

High-dimensional encodings based on temporal modes (TMs) of photonic quantum states provide the foundations for a highly versatile and efficient quantum information science (QIS) framework. Here, we demonstrate a crucial building block for any QIS applications based on TMs: a programmable source of maximally entangled high-dimensional TM states. Our source is based on a parametric down-conversion process driven by a spectrally shaped pump pulse, which facilitates the generation of maximally entangled TM states with a well-defined dimensionality that can be chosen programmatically. We characterize the effective dimensionality of the generated states via measurements of second-order correlation functions and joint spectral intensities, demonstrating the generation of bi-photon TM states with a controlled dimensionality in up to 20 dimensions.

quant-ph↗

arXiv2024

Integrated, bright, broadband parametric down-conversion source for quantum metrology and spectroscopy

Broadband quantum light is a vital resource for quantum metrology and spectroscopy applications such as quantum optical coherence tomography or entangled two photon absorption. For entangled two photon absorption in particular, very high photon flux combined with high time-frequency entanglement is crucial for observing a signal. So far these conditions could be met by using high power lasers driving degenerate, type 0 bulk-crystal spontaneous parametric down conversion (SPDC) sources. This naturally limits the available wavelength ranges and precludes deterministic splitting of the generated output photons. In this work we demonstrate an integrated two-colour SPDC source utilising a group-velocity matched lithium niobate waveguide, reaching both exceptional brightness $1.52\cdot10^6\frac{\mathrm{pairs}}{\mathrm{s\,mW\,GHz}}$ and large bandwidth ($7.8\,$THz FWHM) while pumped with a few mW of continuous wave (CW) laser light. By converting a narrow band pump to broadband pulses the created photon pairs show correlation times of $Δτ\approx 120\,\text{fs}$ while maintaining the narrow bandwidth $Δω_p \ll 1\,\text{MHz}$ of the CW pump light, yielding strong time-frequency entanglement. Furthermore our process can be adapted to a wide range of central wavelengths.

quant-ph↗

arXiv2024

Realization of high-fidelity unitary operations on up to 64 frequency bins

The ability to apply user-chosen large-scale unitary operations with high fidelity to a quantum state is key to realizing future photonic quantum technologies. Here, we realize the implementation of programmable unitary operations on up to 64 frequency-bin modes. To benchmark the performance of our system, we probe different quantum walk unitary operations, in particular Grover walks on four-dimensional hypercubes with similarities exceeding 95\% and quantum walks with 400 steps on circles and finite lines with similarities of 98\%. Our results open a new path towards implementing high-quality unitary operations, which can form the basis for applications in complex tasks, such as Gaussian boson sampling.

quant-ph↗

arXiv2024

A scheme for fully programmable linear quantum networks based on frequency conversion

Linear optical quantum networks, consisting of a quantum input state and a multi-port interferometer, are an important building block for many quantum technological concepts, e.g., Gaussian boson sampling. Here, we propose the implementation of such networks based on frequency conversion by utilising a so called multi-output quantum pulse gate (mQPG). This approach allows the resource efficient and therefore scalable implementation of frequency-bin based, fully programmable interferometers in a single spatial and polarization mode. Quantum input states for this network can be provided by utilising the strong frequency entanglement of a type-0 parametric down conversion (PDC) source. Here, we develop a theoretical framework to describe linear networks based on a mQPG and PDC and utilize it to investigate the limits and scalabilty of our approach.

quant-ph↗

arXiv2023

How well can superconducting nanowire single-photon detectors resolve photon number?

We apply principal component analysis (PCA) to a set of electrical output signals from a commercially available superconducting nanowire single-photon detector (SNSPD) to investigate their photon-number-resolving capability. We find that the rising edge as well as the amplitude of the electrical signal have the most dependence on photon number. Accurately measuring the rising edge while simultaneously measuring the voltage of the pulse amplitude maximizes the photon-number resolution of SNSPDs. Using an optimal basis of principle components, we show unambiguous discrimination between one- and two-photon events, as well as partial resolution up to five photons. This expands the use-case of SNSPDs to photon-counting experiments, without the need of detector multiplexing architectures.

quant-ph↗

arXiv2023

Pyroelectric Influence on Lithium Niobate During the Thermal Transition for Cryogenic Integrated Photonics

Lithium niobate has emerged as a promising platform for integrated quantum optics, enabling efficient generation, manipulation, and detection of quantum states of light. However, integrating single-photon detectors requires cryogenic operating temperatures, since the best performing detectors are based on narrow superconducting wires. While previous studies have demonstrated the operation of quantum light sources and electro-optic modulators in LiNbO3 at cryogenic temperatures, the thermal transition between room temperature and cryogenic conditions introduces additional effects that can significantly influence device performance. In this paper, we investigate the generation of pyroelectric charges and their impact on the optical properties of lithium niobate waveguides when changing from room temperature to 25K, and vice versa. We measure the generated pyroelectric charge flow and correlate this with fast changes in the birefringence acquired through the Senarmont method. Both electrical and optical influence of the pyroelectric effect occurs predominantly at temperatures above 100K.

physics.optics↗

arXiv2023

Fully guided and phase locked Ti:PPLN waveguide squeezing for applications in quantum sensing

This work reports a fully guided setup for single-mode squeezing generation on integrated titanium-indiffused periodically poled nonlinear resonators. A continuous wave laser beam is delivered and the squeezed field is collected by single-mode fibers, where up to -3.17(9) dB of useful squeezing is available in fibers. To showcase the usefulness of such a fiber-coupled device, we applied the generated squeezed light in a fiber-based phase sensing experiment, showing a quantum enhancement in the signal-to-noise ratio of 0.35 dB. Moreover, our investigation of photorefraction's impact on the cavity resonance condition suggests that it causes system instabilities at high powers.

quant-ph↗

arXiv2023

All optical operation of a superconducting photonic interface

Advanced electro-optic processing combines electrical control with optical modulation and detection. For quantum photonic applications these processes must be carried out at the single photon level with high efficiency and low noise. Integrated quantum photonics has made great strides achieving single photon manipulation by combining key components on integrated chips which are operated by external driving electronics. Nevertheless, electrical interconnects between driving electronics and the electro-optic components, some of which require cryogenic operating conditions, can introduce parasitic effects. Here we show an all-optical interface which simultaneously delivers the operation power to, and extracts the measurement signal from, an advanced photonic circuit, namely, bias and readout of a superconducting nanowire single photon detector (SNSPD) on a single stage in a 1K cryostat. To do so, we supply all power for the single photon detector, output signal conditioning, and electro-optic readout using optical interconnects alone, thereby fully decoupling the cryogenic circuitry from the external environment. This removes the need to heatsink electrical connections, and potentially offers low-loss, high-bandwidth signal processing. This method opens the possibility to operate other advanced electrically decoupled photonic circuits such as optical control and readout of superconducting circuits, and feedforward for photonic quantum computing.

quant-ph↗