arXiv subjects

Christopher J. K. Richardson

Publications and source records attributed to Christopher J. K. Richardson.

15 recordsLinked to original sources

arXiv2026

Voltage-tunable Josephson Junctions on Germanium Quantum Wells with in-situ Aluminum Contacts

Voltage-tunable Josephson junctions (VT-JJs) are an emerging element in superconducting quantum electronics with potential to expand the functionality of conventional designs. While VT-JJs are largely compatible with wafer-scale semiconductor processing, their integration into quantum circuits remains a challenge due to unmitigated semiconductor microwave loss. Here, a deep mesa etch process, wherein the epitaxial material is removed except the VT-JJ device, will facilitate the integration of VT-JJs with low-microwave-loss circuit elements by allowing these circuit elements to be placed directly on a low-loss substrate. A Germanium quantum well is grown by Molecular Beam Epitaxy (MBE) on a float zone silicon substrate with in-situ deposited aluminum contacts. This combination allows the formation of an oxide-free superconductor-semiconductor interface. The deep mesa etch process is optimized to produce a sidewall taper sufficient for continuous metal deposition from the substrate to the top of the mesa for electrostatic gate electrodes and interconnects. The fabricated Josephson junctions demonstrate gate-tunable supercurrents with a maximum critical current over 100 nA and critical-current normal-resistance product of $8.63~μV$. These results demonstrate a pathway toward improved integration of voltage-tunable superconducting circuit elements with quantum electronic building blocks such as couplers and qubits.

cond-mat.mes-hall↗

arXiv2026

Magnetic Field-Mediated Superconducting Logic

While superconductors are highly attractive for energy-efficient computing, fundamental limitations in their logic circuit integration have hindered scaling and led to increased energy consumption. We therefore propose and experimentally demonstrate a novel superconducting switching device utilizing the proximity magnetization from a spin-orbit torque-switched magnet to control the resistivity of a superconductor. We further propose a complete logic family comprised solely of these devices. This novel implementation has the potential to drastically outperform existing superconducting logic families in terms of energy efficiency and scalability.

cs.ET↗

arXiv2026

Low-loss Nb on Si superconducting resonators from a dual-use spintronics deposition chamber and with acid-free post-processing

Magnetic impurities are known to degrade superconductivity. For this reason, physical vapor deposition chambers that have previously been used for magnetic materials have generally been avoided for making high-quality superconducting resonator devices. In this article, we show by example that such chambers can be used for this purpose; with Nb films sputtered in a chamber that continues to be used for magnetic materials, we demonstrate compact (\SI{3}{\micro\meter} gap) coplanar waveguide resonators with low-power internal quality factors near one million. We achieve this using a resist strip bath with no post-fabrication acid treatment, which results in performance comparable to previous strip baths with acid treatments. We also find evidence that this improved resist strip bath provides a better surface chemical template for post-fabrication hydrogen fluoride processing. These results are consistent across three Si substrate preparation methods, including a \SI{700}{\celsius} anneal. These results will inform nanofabrication for other superconducting materials and the integration of magnetic materials for hybrid systems.

quant-ph↗

arXiv2025

Power and temperature dependent model for High Q superconductors

Measuring the internal quality factor of coplanar waveguide superconducting resonators is an established method of determining small losses in superconducting devices. Traditionally, the resonator losses are only attributed to two-level system (TLS) defects using a power dependent model for the quality factor. However, excess non-equilibrium quasiparticles can also limit the quality factor of the planar superconducting resonators used in circuit quantum electrodynamics. At millikelvin temperatures, quasiparticles can be generated by breaking Cooper pairs via a single high-energy or multiple sub-gap photons. Here a two-temperature, power and temperature dependent model is proposed to evaluate resonator losses for isolating TLS and quasiparticle loss simultaneously. The model combines the conventional TLS power and temperature dependence with an effective temperature non-equilibrium quasiparticle description of the superconducting loss. The quasiparticle description is based on the quasiparticle number density calculated using rate equations for an external quasiparticle generation source, recombination, and trapping. The number density is translated to an effective temperature using a thermal distribution that may be different from the bath. Experimental measurements of high-quality factor resonators fabricated from single crystal aluminum and titanium nitride thin films on silicon are interpreted with the presented model. This approach enables identification of quasiparticle and TLS loss, resulting in the determination that the TiN resonator has comparable TLS and quasiparticle loss at low power and low-temperature, while the low-temperature Al resonator behavior is dominated by non-equilibrium quasiparticle loss.

quant-ph↗

arXiv2024

Outcomes from a Workshop on a National Center for Quantum Education

In response to numerous programs seeking to advance quantum education and workforce development in the United States, experts from academia, industry, government, and professional societies convened for a National Science Foundation-sponsored workshop in February 2024 to explore the benefits and challenges of establishing a national center for quantum education. Broadly, such a center would foster collaboration and build the infrastructure required to develop a diverse and quantum-ready workforce. The workshop discussions centered around how a center could uniquely address gaps in public, K-12, and undergraduate quantum information science and engineering (QISE) education. Specifically, the community identified activities that, through a center, could lead to an increase in student awareness of quantum careers, boost the number of educators trained in quantum-related subjects, strengthen pathways into quantum careers, enhance the understanding of the U.S. quantum workforce, and elevate public engagement with QISE. Core proposed activities for the center include professional development for educators, coordinated curriculum development and curation, expanded access to educational laboratory equipment, robust evaluation and assessment practices, network building, and enhanced public engagement with quantum science.

physics.ed-ph↗

arXiv2023

Tunable quantum emitters on large-scale foundry silicon photonics

Controlling large-scale many-body quantum systems at the level of single photons and single atomic systems is a central goal in quantum information science and technology. Intensive research and development has propelled foundry-based silicon-on-insulator photonic integrated circuits to a leading platform for large-scale optical control with individual mode programmability. However, integrating atomic quantum systems with single-emitter tunability remains an open challenge. Here, we overcome this barrier through the hybrid integration of multiple InAs/InP microchiplets containing high-brightness infrared semiconductor quantum dot single photon emitters into advanced silicon-on-insulator photonic integrated circuits fabricated in a 300~mm foundry process. With this platform, we achieve single photon emission via resonance fluorescence and scalable emission wavelength tunability through an electrically controlled non-volatile memory. The combined control of photonic and quantum systems opens the door to programmable quantum information processors manufactured in leading semiconductor foundries.

physics.optics↗

arXiv2022

Plug-and-play quantum devices with efficient fiber-quantum dot interface

Incorporating solid-state quantum emitters into optical fiber networks enables the long-distance transmission of quantum information and the remote connection of distributed quantum nodes. However, interfacing quantum emitters with fiber optics encounters several challenges, including low coupling efficiency and stability. Here, we demonstrate a highly efficient fiber-interfacing photonic device that directly launches single photons from quantum dots into a standard FC/PC-connectorized single-mode fiber (SMF28). Optimally designed photonic structures based on hole gratings produce an ultra-narrow directional beam that matches the small numerical aperture of a single-mode fiber. A pick-and-place technique selectively integrates a single miniaturized device into the core of the fiber. Our approach realizes a plug-and-play single-photon device that does not require any optical alignment and thus guarantees long-term stability. The results thus represent a major step toward practical and reliable quantum lights across a fiber network.

quant-ph↗

arXiv2020

Achieving a quantum smart workforce

Interest in building dedicated Quantum Information Science and Engineering (QISE) education programs has greatly expanded in recent years. These programs are inherently convergent, complex, often resource intensive and likely require collaboration with a broad variety of stakeholders. In order to address this combination of challenges, we have captured ideas from many members in the community. This manuscript not only addresses policy makers and funding agencies (both public and private and from the regional to the international level) but also contains needs identified by industry leaders and discusses the difficulties inherent in creating an inclusive QISE curriculum. We report on the status of eighteen post-secondary education programs in QISE and provide guidance for building new programs. Lastly, we encourage the development of a comprehensive strategic plan for quantum education and workforce development as a means to make the most of the ongoing substantial investments being made in QISE.

physics.ed-ph↗

arXiv2019

A fiber-integrated single photon source emitting at telecom wavelengths

Fiber-coupled single photon sources are essential components of photonics-based quantum information processors. Most fiber-coupled single photon sources require careful alignment between fibers and quantum emitters. In this work, we present an alignment-free fiber-integrated single photon source based on an InAs/InP quantum dot emitting at telecom wavelengths. We designed a nanobeam containing the quantum dots attached to a fiber taper. The adiabatic tapered coupler of the nanobeam enables efficient light coupling to the fiber taper. Using a tungsten probe in a focused ion beam system, we transferred the nanobeam to the fiber taper. The observed fiber-coupled single photon emission occurs with a brightness of 1.5% and purity of 86%. This device provides a building block for fiber-optic quantum circuits that have various applications, such as quantum communication and distributed quantum computing.

cond-mat.mes-hall↗

arXiv2018

Large Stark Tuning of InAs/InP Quantum Dots

InAs/InP quantum dots are excellent sources of telecom single-photon emission and are among the most promising candidates for scalable quantum photonic circuits. However, geometric differences in each quantum dot leads to slightly different emission wavelengths and hinders the possibility of generating multiple identical quantum emitters on the same chip. Stark tuning is an efficient technique to overcome this issue as it can control the emission energy of individual quantum dots through the quantum-confined Stark effect. Realizing this technique in InAs/InP quantum dots has previously been limited to shifts of less than 0.8 meV due to jumps in the emission energy because of additional charges at high electric field intensities. We demonstrate up to 5.1 meV of Stark tuning in the emission wavelength of InAs/InP quantum dots. To eliminate undesirable jumps to charged state, we use a thin oxide insulator to prevent carrier injection from the contacts, thereby significantly improves the tuning range of the Stark effect. Moreover, the single-photon nature and narrow linewidth of the quantum dot emission is preserved under a wide range of applied electric fields. Using photoluminescence intensity measurements and time-resolved lifetime spectroscopy we confirmed that this Stark tuning range is limited by carrier tunneling at high electric fields. This result is an important step toward integrating multiple identical quantum emitters at telecom wavelengths on-a-chip, which is crucial for realizing complex quantum photonic circuits for quantum information processing.

cond-mat.mes-hall↗

arXiv2018

Integration of Quantum Emitters with Lithium Niobate Photonics

The integration of quantum emitters with integrated photonics enables complex quantum photonic circuits that are necessary for photonic implementation of quantum simulators, computers, and networks. Thin-film lithium niobate is an ideal material substrate for quantum photonics because it can tightly confine light in small waveguides and has a strong electro-optic effect that can switch and modulate single photons at low power and high speed. However, lithium niobite lacks efficient single-photon emitters, which are essential for scalable quantum photonic circuits. We demonstrate deterministic coupling of single-photon emitters with a lithium niobate photonic chip. The emitters are composed of InAs quantum dots embedded in an InP nanobeam, which we transfer to a lithium niobate waveguide with nanoscale accuracy using a pick-and place approach. An adiabatic taper transfers single photons emitted into the nanobeam to the lithium niobate waveguide with high efficiency. We verify the single photon nature of the emission using photon correlation measurements performed with an on-chip beamsplitter. Our results demonstrate an important step toward fast, reconfigurable quantum photonic circuits for quantum information processing.

quant-ph↗

arXiv2018

Super-radiant emission from quantum dots in a nanophotonic waveguide

Future scalable photonic quantum information processing relies on the ability of integrating multiple interacting quantum emitters into a single chip. Quantum dots provide ideal on-chip quantum light sources. However, achieving quantum interaction between multiple quantum dots on-a-chip is a challenging task due to the randomness in their frequency and position, requiring local tuning technique and long-range quantum interaction. Here, we demonstrate quantum interactions between distant two quantum dots on a nanophotonic waveguide. We achieve a photon-mediated long-range interaction by integrating the quantum dots to the same optical mode of a nanophotonic waveguide and overcome spectral mismatch by incorporating on-chip thermal tuners. We observe their quantum interactions of the form of super-radiant emission, where the two dots collectively emit faster than each dot individually. Creating super-radiant emission from integrated quantum emitters could enable compact chip-integrated photonic structures that exhibit long-range quantum interactions. Therefore, these results represent a major step towards establishing photonic quantum information processors composed of multiple interacting quantum emitters on a semiconductor chip.

quant-ph↗

arXiv2017

Hybrid integration of solid-state quantum emitters on a silicon photonic chip

Scalable quantum photonic systems require efficient single photon sources coupled to integrated photonic devices. Solid-state quantum emitters can generate single photons with high efficiency, while silicon photonic circuits can manipulate them in an integrated device structure. Combining these two material platforms could, therefore, significantly increase the complexity of integrated quantum photonic devices. Here, we demonstrate hybrid integration of solid-state quantum emitters to a silicon photonic device. We develop a pick-and-place technique that can position epitaxially grown InAs/InP quantum dots emitting at telecom wavelengths on a silicon photonic chip deterministically with nanoscale precision. We employ an adiabatic tapering approach to transfer the emission from the quantum dots to the waveguide with high efficiency. We also incorporate an on-chip silicon-photonic beamsplitter to perform a Hanbury-Brown and Twiss measurement. Our approach could enable integration of pre-characterized III-V quantum photonic devices into large-scale photonic structures to enable complex devices composed of many emitters and photons.

quant-ph↗

arXiv2016

Two-photon interference from independent cavity-coupled emitters on-a-chip

Interactions between solid-state quantum emitters and cavities are important for a broad range of applications in quantum communication, linear optical quantum computing, nonlinear photonics, and photonic quantum simulation. These applications often require combining many devices on a single chip with identical emission wavelengths in order to generate two-photon interference, the primary mechanism for achieving effective photon-photon interactions. Such integration remains extremely challenging due to inhomogeneous broadening and fabrication errors that randomize the resonant frequencies of both the emitters and cavities. In this letter we demonstrate two-photon interference from independent cavity-coupled emitters on the same chip, providing a potential solution to this long-standing problem. We overcome spectral mismatch between different cavities due to fabrication errors by depositing and locally evaporating a thin layer of condensed nitrogen. We integrate optical heaters to tune individual dots within each cavity to the same resonance with better than 3 μeV of precision. Combining these tuning methods, we demonstrate two-photon interference between two devices spaced by less than 15 μm on the same chip with a post-selected visibility of 33%. These results pave the way to integrate multiple quantum light sources on the same chip to develop quantum photonic devices.

quant-ph↗

arXiv2016

Two-photon interference from a bright single photon source at telecom wavelengths

Long-distance quantum communication relies on the ability to efficiently generate and prepare single photons at telecom wavelengths. In many applications these photons must also be indistinguishable such that they exhibit interference on a beamsplitter, which implements effective photon-photon interactions. However, deterministic generation of indistinguishable single photons with high brightness remains a challenging problem. We demonstrate two-photon interference at telecom wavelengths using an InAs/InP quantum dot in a nanophotonic cavity. The cavity enhances the quantum dot emission, resulting in a nearly Gaussian transverse mode profile with high out-coupling efficiency exceeding 36% after multi-photon correction. We also observe Purcell enhanced spontaneous emission rate up to 4. Using this source, we generate linearly polarized, high purity single photons at 1.3 micron wavelength and demonstrate the indistinguishable nature of the emission using a two-photon interference measurement, which exhibits indistinguishable visibilities of 18% without post-selection and 67% with post-selection. Our results provide a promising approach to generate bright, deterministic single photons at telecom wavelength for applications in quantum networking and quantum communication.

quant-ph↗