arXiv subjects

Claas Abert

Publications and source records attributed to Claas Abert.

At least 37 records · Page 2Linked to original sources

arXiv2025

Thermal Stoner-Wohlfarth Model for Magnetodynamics of Single Domain Nanoparticles: Implementation and Validation

We present the thermal Stoner-Wohlfarth (tSW) model and apply it in the context of Molecular Dynamics simulations. The model is validated against an ensemble of immobilized, randomly oriented uniaxial particles (solid superparamagnet) and a classical dilute ferrofluid for different combinations of anisotropy strength and magnetic field/moment coupling, at a fixed temperature. We compare analytical and simulation results to quantify the viability of the tSW model in reproducing the equilibrium (with and without dipole-dipole interactions) and dynamic (without dipole-dipole interactions) properties of magnetic soft matter systems. We show that if the anisotropy of a particle is more than five times higher than the thermal fluctuations, tSW is applicable and efficient. This approach allows one to consider the interplay between Néel and Brownian relaxation, often neglected in the fixed point-dipole representation-based magnetic soft matter theoretical investigations.

physics.comp-ph↗

arXiv2024

Damping Enhancement in YIG at Millikelvin Temperatures due to GGG Substrate

Quantum magnonics aims to exploit the quantum mechanical properties of magnons for nanoscale quantum information technologies. Ferrimagnetic yttrium iron garnet (YIG), which offers the longest magnon lifetimes, is a key material typically grown on gadolinium gallium garnet (GGG) substrates for structural compatibility. However, the increased magnetic damping in YIG/GGG systems below 50$\,$K poses a challenge for quantum applications. Here, we study the damping in a 97$\,$nm-thick YIG film on a 500$\,μ$m-thick GGG substrate at temperatures down to 30$\,$mK using ferromagnetic resonance (FMR) spectroscopy. We show that the dominant physical mechanism for the observed tenfold increase in FMR linewidth at millikelvin temperatures is the non-uniform bias magnetic field generated by the partially magnetized paramagnetic GGG substrate. Numerical simulations and analytical theory show that the GGG-driven linewidth enhancement can reach up to 6.7 times. In addition, at low temperatures and frequencies above 18$\,$GHz, the FMR linewidth deviates from the viscous Gilbert-damping model. These results allow the partial elimination of the damping mechanisms attributed to GGG, which is necessary for the advancement of solid-state quantum technologies.

cond-mat.mes-hall↗

arXiv2024

Realization of inverse-design magnonic logic gates

Magnonic logic gates represent a crucial step toward realizing fully magnonic data processing systems without reliance on conventional electronic or photonic elements. Recently, a universal and reconfigurable inverse-design device has been developed, featuring a 7$\times$7 array of independent current loops that create local inhomogeneous magnetic fields to scatter spin waves in a Yttrium-Iron-Garnet film. While initially used for linear RF components, we now demonstrate key non-linear logic gates, NOT, OR, NOR, AND, NAND, and a half-adder, sufficient for building a full processor. In this system, binary data ("0" and "1") are encoded in the spin-wave amplitude. The contrast ratio, representing the difference between logic states, achieved values of 34, 53.9, 11.8, 19.7, 17, and 9.8 dB for these gates, respectively.

cond-mat.other↗

arXiv2024

Wavenumber-dependent magnetic losses in YIG-GGG heterostructures at millikelvin temperatures

Magnons have inspired potential applications in modern quantum technologies and hybrid quantum systems due to their intrinsic nonlinearity, nanoscale scalability, and a unique set of experimentally accessible parameters for manipulating their dispersion. Such magnon-based quantum technologies demand long decoherence times, millikelvin temperatures, and minimal dissipation. Due to its low magnetic damping, the ferrimagnet yttrium iron garnet (YIG), grown on gadolinium gallium garnet (GGG), is the most promising material for this objective. To comprehend the magnetic losses of propagating magnons in such YIG-GGG heterostructures at cryogenic temperatures, we investigate magnon transport in a micrometer-thick YIG sample via propagating spin-wave spectroscopy (PSWS) measurements for temperatures between 4K to 26mK. We demonstrate an increase in the dissipation rate with wavenumber at cryogenic temperatures, caused by dipolar coupling to the partially magnetized GGG substrate. Additionally, we observe a temperature-dependent decrease in spin-wave transmission, attributed to rare earth ion relaxations. The critical role of the additional dissipation channels at cryogenic temperatures is underpinned by the comparison of the experimental results with theoretical calculations and micromagnetic simulations. Our findings strengthen the understanding of magnon losses at millikelvin temperatures, which is essential for the future detection of individual propagating magnons.

cond-mat.mes-hall↗

arXiv2024

NeuralMag: an open-source nodal finite-difference code for inverse micromagnetics

We present NeuralMag, a flexible and high-performance open-source Python library for micromagnetic simulations. NeuralMag leverages modern machine learning frameworks, such as PyTorch and JAX, to perform efficient tensor operations on various parallel hardware, including CPUs, GPUs, and TPUs. The library implements a novel nodal finite-difference discretization scheme that provides improved accuracy over traditional finite-difference methods without increasing computational complexity. NeuralMag is particularly well-suited for solving inverse problems, especially those with time-dependent objectives, thanks to its automatic differentiation capabilities. Performance benchmarks show that NeuralMag is competitive with state-of-the-art simulation codes while offering enhanced flexibility through its Python interface and integration with high-level computational backends.

physics.comp-ph↗

arXiv2024

Energy landscape of noncollinear exchange coupled magnetic multilayers

We conduct an exploration of the energy landscape of two coupled ferromagnetic layers with perpendicular-to-plane uniaxial anisotropy using finite-element micromagnetic simulations. These multilayers can be used to produce noncollinearity in spin-transfer torque magnetic random-access memory cells, which has been shown to increase the performance of this class of computer memory. We show that there exists a range of values of the interlayer exchange coupling constants for which the magnetic state of these multilayers can relax into two energy minima. The size of this region is determined by the difference in the magnitude of the layer anisotropies and is minimized when this difference is large. In this case, there is a wide range of experimentally achievable coupling constants that can produce desirable and stable noncollinear alignment. We investigate the energy barriers separating the local and global minima using string method simulations, showing that the stabilities of the minima increase with increasing difference in the anisotropy of the ferromagnetic layers. We provide an analytical solution to the location of the minima in the energy landscape of coupled macrospins, which has good agreement with our micromagnetic results for a case involving ferromagnetic layers with the same thickness and anisotropy, no demagnetization field, and large exchange stiffness. These results are important to understand how best to employ noncollinear coupling in the next generation of thin film magnetic devices.

cond-mat.mes-hall↗

arXiv2024

Transition from ferromagnetic to noncollinear to paramagnetic state with increasing Ru concentration in FeRu films

The structural and magnetic properties of sputter-deposited Fe$_{100-x}$Ru$_x$ films were studied for $x \leq 50$. The crystal structure of Fe$_{100-x}$Ru$_x$ is shown to be predominantly body-centered cubic for $x<13$ and to undergo a gradual transition to hexagonal close-packed in the concentration range $13 \lesssim x \lesssim 20$. Magnetic measurements indicate that the addition of Ru induces a noncollinear magnetic order in the body-centered cubic FeRu alloys, while the hexagonal close-packed FeRu alloys exhibit paramagnetic behavior. Increasing the Ru concentration in body-centered cubic FeRu alloys decreases the size of magnetic domains, approaching the size of magnetic grains. A simple atomistic model was used to show that antiferromagnetic coupling of Fe atoms across Ru atoms can be responsible for inducing noncollinear order in the FeRu cubic structures. Magnetic multilayer structures used in thin-film magnetic devices make extensive use of both Fe and Ru layers. Our results reveal that the presence of even a small amount of Ru in Fe influences the magnetic order of Fe, which could impact the performance of these devices.

cond-mat.mtrl-sci↗

arXiv2024

Experimental realisation of a universal inverse-design magnonic device

In the field of magnonics, which uses magnons, the quanta of spin waves, for energy-efficient data processing, significant progress has been made leveraging the capabilities of the inverse design concept. This approach involves defining a desired functionality and employing a feedback-loop algorithm to optimise the device design. In this study, we present the first experimental demonstration of a reconfigurable, lithography-free, and simulation-free inverse-design device capable of implementing various RF components. The device features a square array of independent direct current loops that generate a complex reconfigurable magnetic medium atop a Yttrium-Iron-Garnet (YIG) rectangular film for data processing in the gigahertz range. Showcasing its versatility, the device addresses inverse problems using two algorithms to create RF notch filters and demultiplexers. Additionally, the device holds promise for binary, reservoir, and neuromorphic computing applications.

physics.app-ph↗

arXiv2024

Vortex motion in reconfigurable three-dimensional superconducting nanoarchitectures

When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in technologies. Here, we harness three-dimensional (3D) nanopatterning to fabricate and control the emergent properties of a 3D superconducting nanostructure. Not only are we able to demonstrate the existence and motion of superconducting vortices in 3D but, with simulations, we show that the confinement leads to a well-defined bending of the vortices within the volume of the structure. Moreover, we experimentally observe a strong geometrical anisotropy of the critical field, through which we achieve the reconfigurable coexistence of superconducting and normal states in our 3D superconducting architecture, and the local definition of weak links. In this way, we uncover an intermediate regime of nanosuperconductivity, where the vortex state is truly three-dimensional and can be designed and manipulated by geometrical confinement. This insight into the influence of 3D geometries on superconducting properties offers a route to local reconfigurable control for future computing devices, sensors, and quantum technologies.

cond-mat.mes-hall↗

arXiv2024

Tailoring the energy landscape of a Bloch point singularity with curvature

Topological defects, or singularities, play a key role in the statics and dynamics of complex systems. In magnetism, Bloch point singularities represent point defects that mediate the nucleation of textures such as skyrmions and hopfions. However, while the textures are typically stabilised in chiral magnets, the influence of chirality on the Bloch point singularities remains relatively unexplored. Here we harness advanced three-dimensional nanofabrication to explore the influence of chirality on Bloch point singularities by introducing curvature-induced symmetry breaking in a ferromagnetic nanowire. Combining X-ray magnetic microscopy with the application of in situ magnetic fields, we demonstrate that Bloch point singularity-containing domain walls are stabilised in straight regions of the sample, and determine that curvature can be used to tune the energy landscape of the Bloch points. Not only are we able to pattern pinning points but, by controlling the gradient of curvature, we define asymmetric potential wells to realise a robust Bloch point shift-register with non-reciprocal behaviour. These insights into the influence of symmetry and chirality on singularities offers a route to the controlled nucleation and propagation of topological textures, providing opportunities for logic and computing devices.

cond-mat.mes-hall↗

arXiv2024

Field-free switching of perpendicular magnetic elements by using two orthogonal sub nanosecond spin orbit torque pulses

We propose a field-free switching mechanism that utilizes two spatially orthogonal spin-orbit torque (SOT) currents. Initially applied simultaneously, one of the currents is subsequently switched off. The superposition of these two currents results in an in-plane magnetization, which is not orthogonal to the remaining SOT current after the second one is deactivated. This symmetry-breaking procedure leads to reproducible and rapid switching, with field pulse durations as short as 0.25 nanoseconds.

cond-mat.mes-hall↗

arXiv2024

Skyrmionic device for three dimensional magnetic field sensing enabled by spin-orbit torques

Magnetic skyrmions are topologically protected local magnetic solitons that are promising for storage, logic or general computing applications. In this work, we demonstrate that we can use a skyrmion device based on [W/CoFeB/MgO] 1 0 multilayers for three-dimensional magnetic field sensing enabled by spin-orbit torques (SOT). We stabilize isolated chiral skyrmions and stripe domains in the multilayers, as shown by magnetic force microscopy images and micromagnetic simulations. We perform magnetic transport measurements to show that we can sense both in-plane and out-of-plane magnetic fields by means of a differential measurement scheme in which the symmetry of the SOT leads to cancelation of the DC offset. With the magnetic parameters obtained by vibrating sample magnetometry and ferromagnetic resonance measurements, we perform finite-temperature micromagnetic simulations, where we investigate the fundamental origin of the sensing signal. We identify the topological transformation between skyrmions, stripes and type-II bubbles that leads to a change in the resistance that is read-out by the anomalous Hall effect. Our study presents a novel application for skyrmions, where a differential measurement sensing concept is applied to quantify external magnetic fields paving the way towards more energy efficient applications in skyrmionics based spintronics.

cond-mat.mes-hall↗

arXiv2024

Steerable current-driven emission of spin waves in magnetic vortex pairs

The efficient excitation of spin waves is a key challenge in the realization of magnonic devices. We demonstrate the current-driven generation of spin waves in antiferromagnetically coupled magnetic vortices. We employ time-resolved scanning transmission X-ray microscopy (TR-STXM) to directly image the emission of spin waves upon the application of an alternating current flowing directly through the magnetic stack. Micromagnetic simulations allow us to identify the origin of the excitation to be the current-driven Oersted field, which in the present system proves to be orders of magnitude more efficient than the commonly used excitation via stripline antennas. Our numerical studies also reveal that the spin-transfer torque can lead to the emission of spin waves as well, yet only at much higher current amplitudes. By using magnetostrictive materials, we futhermore demonstrate that the direction of the magnon propagation can be steered by increasing the excitation amplitude, which modifies the underlying magnetization profile through an additional anisotropy in the magnetic layers. The demonstrated methods allow for the efficient and tunable excitation of spin waves, marking a significant advance in the generation and control of spin waves in magnonic devices.

cond-mat.mes-hall↗

arXiv2024

Magnetic anisotropy and GGG substrate stray field in YIG films down to millikelvin temperatures

Quantum magnonics investigates the quantum-mechanical properties of magnons such as quantum coherence or entanglement for solid-state quantum information technologies at the nanoscale. The most promising material for quantum magnonics is the ferrimagnetic yttrium iron garnet (YIG), which hosts magnons with the longest lifetimes. YIG films of the highest quality are grown on a paramagnetic gadolinium gallium garnet (GGG) substrate. The literature has reported that ferromagnetic resonance (FMR) frequencies of YIG/GGG decrease at temperatures below 50 K despite the increase in YIG magnetization. We investigated a 97 nm-thick YIG film grown on 500 $\mathrmμ$m-thick GGG substrate through a series of experiments conducted at temperatures as low as 30 mK, and using both analytical and numerical methods. Our findings suggest that the primary factor contributing to the FMR frequency shift is the stray magnetic field created by the partially magnetized GGG substrate. This stray field is antiparallel to the applied external field and is highly inhomogeneous, reaching up to 40 mT in the center of the sample. At temperatures below 500 mK, the GGG field exhibits a saturation that cannot be described by the standard Brillouin function for a paramagnet. Including the calculated GGG field in the analysis of the FMR frequency versus temperature dependence allowed the determination of the cubic and uniaxial anisotropies. We find that the total anisotropy increases more than three times with the decrease in temperature down to 2 K. Our findings enable accurate predictions of the YIG/GGG magnetic systems behavior at low and ultra-low millikelvin temperatures, crucial for developing quantum magnonic devices.

cond-mat.mes-hall↗

arXiv2023

Parallel-in-Time Integration of the Landau-Lifshitz-Gilbert Equation with the Parallel Full Approximation Scheme in Space and Time

Speeding up computationally expensive problems, such as numerical simulations of large micromagnetic systems, requires efficient use of parallel computing infrastructures. While parallelism across space is commonly exploited in micromagnetics, this strategy performs poorly once a minimum number of degrees of freedom per core is reached. We use magnum.pi, a finite-element micromagnetic simulation software, to investigate the Parallel Full Approximation Scheme in Space and Time (PFASST) as a space- and time-parallel solver for the Landau-Lifshitz-Gilbert equation (LLG). Numerical experiments show that PFASST enables efficient parallel-in-time integration of the LLG, significantly improving the speedup gained from using a given number of cores as well as allowing the code to scale beyond spatial limits.

physics.comp-ph↗

arXiv2023

Laser-induced real-space topology control of spin wave resonances

Femtosecond laser excitation of materials that exhibit magnetic spin textures promises advanced magnetic control via the generation of ultrafast and non-equilibrium spin dynamics. We explore such possibilities in ferrimagnetic [Fe(0.35 nm)/Gd(0.40 nm)]$_{160}$ multilayers, which host a rich diversity of magnetic textures from stripe domains at low magnetic fields, a dense bubble/skyrmion lattice at intermediate fields, and a single domain state for high magnetic fields. Using femtosecond magneto-optics, we observe distinct coherent spin wave dynamics in response to a weak laser excitation allowing us to unambiguously identify the different magnetic spin textures. Moreover, employing strong laser excitation we show that we achieve versatile control of the coherent spin dynamics via non-equilibrium and ultrafast transformation of magnetic spin textures by both creating and annihilating bubbles/skyrmions. We corroborate our findings by micromagnetic simulations and by Lorentz transmission electron microscopy before and after laser exposure.

cond-mat.mtrl-sci↗

arXiv2023

Single device offset-free magnetic field sensing principle with tunable sensitivity and linear range based on spin-orbit-torques

We propose a novel device concept using spin-orbit-torques to realize a magnetic field sensor, where we eliminate the sensor offset using a differential measurement concept. We derive a simple analytical formulation for the sensor signal and demonstrate its validity with numerical investigations using macrospin simulations. The sensitivity and the measurable linear sensing range in the proposed concept can be tuned by either varying the effective magnetic anisotropy or by varying the magnitude of the injected currents. We show that undesired perturbation fields normal to the sensitive direction preserve the zero-offset property and only slightly modulate the sensitivity of the proposed sensor. Higher-harmonics voltage analysis on a Hall cross experimentally confirms the linearity and tunability via current strength. Additionally, the sensor exhibits a non-vanishing offset in the experiment which we attribute to the anomalous Nernst effect.

cond-mat.mes-hall↗

arXiv2023

magnum.np -- A PyTorch based GPU enhanced Finite Difference Micromagnetic Simulation Framework for High Level Development and Inverse Design

magnum.np is a micromagnetic finite-difference library completely based on the tensor library PyTorch. The use of such a high level library leads to a highly maintainable and extensible code base which is the ideal candidate for the investigation of novel algorithms and modeling approaches. On the other hand magnum.np benefits from the devices abstraction and optimizations of PyTorch enabling the efficient execution of micromagnetic simulations on a number of computational platforms including GPU and potentially TPU systems. We demonstrate a competitive performance to state-of-the art micromagnetic codes such a mumax3 and show how our code enables the rapid implementation of new functionality. Furthermore, handling inverse problems becomes possible by using PyTorch's autograd feature.

physics.comp-ph↗