arXiv subjects

Claas Abert

Publications and source records attributed to Claas Abert.

At least 55 records · Page 3Linked to original sources

arXiv2022

Self-consistent solution of magnetic and friction energy losses of a magnetic nanoparticle

We present a simple simulation model for analysing magnetic and frictional losses of magnetic nano-particles in viscous fluids subject to alternating magnetic fields. Assuming a particle size below the single-domain limit, we use a macrospin approach and solve the Landau-Lifshitz-Gilbert equation coupled to the mechanical torque equation. Despite its simplicity the presented model exhibits surprisingly rich physics and enables a detailed analysis of the different loss processes depending on field parameters and initial arrangement of the particle and the field. Depending on those parameters regions of different steady states emerge: a region with dominating Néel relaxation and high magnetic losses and another region region with high frictional losses at low fields or low frequencies. The energy increases continuously even across regime boundaries up to frequencies above the Brownian relaxation limit. At those higher frequencies the steady state can also depend on the initial orientation of the particle in the external field. The general behavior and special cases and their specific absorption rates are compared and discussed.

physics.atm-clus↗

arXiv2022

Generation and annihilation of skyrmions and antiskyrmions in magnetic heterostructures

We demonstrate the controlled generation and annihilation of (anti)skyrmions with tunable chirality in magnetic heterostructures by means of micromagnetic simulations. By making use of magnetic (anti)vortices in patterned ferromagnetic layer, we stabilize full lattices of (anti)skyrmions in an underlying skyrmionic thin film in a reproducible manner. The stability of the (anti)skyrmion depends on the polarization of the (anti)vortex, whereas their chirality is given by those of the (anti)vortices. Furthermore, we demonstrate that the core coupling between the (anti)vortices and (anti)skyrmions allows to annihilate the spin-objects in a controlled fashion by applying short pulses of in-plane external magnetic fields, representing a new key paradigm in skyrmionic devices.

cond-mat.mes-hall↗

arXiv2022

Accurate finite-difference micromagnetics of magnets including RKKY interaction -- analytical solution and comparison to standard micromagnetic codes

Within this paper we show the importance of accurate implementations of the RKKY interactions for antiferromagnetically coupled ferromagnetic layers with thicknesses exceeding the exchange length. In order to evaluate the performance of different implementations of RKKY interaction, we develop a benchmark problem by deriving the analytical formula for the saturation field of two infinitely thick magnetic layers that are antiparallelly coupled. This benchmark problem shows that state-of-the-art implementations in commonly used finite-difference codes lead to errors of the saturation field that amount to more than 20% for mesh sizes of 2 nm which is well below the exchange length of the material. In order to improve the accuracy, we develop higher order cell based and nodal based finite-difference codes that significantly reduce the error compared to state-of-the-art implementations. For the second order cell based and first order nodal based finite element approach the error of the saturation field is reduced by about a factor of 10 (2% error) for the same mesh size of 2 nm.

cond-mat.mtrl-sci↗

arXiv2022

On the origin of noncollinear magnetization coupling across RuX layers

We present a simple atomistic model for the description of noncollinear coupling in magnetic multilayers with hybrid spacer layers made of Ru alloyed to ferromagnetic atoms such as Fe. In contrast to previous analytical and micromagnetic models that explain the noncollinear coupling by means of lateral fluctuations in the coupling constant, the presented model accounts for atom-atom coupling in all three spatial dimensions within the spacer layer. The new model is able to accurately predict the dependence of the macroscopic bilinear and biquadratic coupling constants on the spacer-layer composition and thickness, showing much better quantitative agreement than lateral-fluctuation models. Moreover, it predicts noncollinear coupling even for infinitely stiff ferromagnetic layers which goes beyond the predictions of previous models.

cond-mat.mtrl-sci↗

arXiv2022

In-situ alignment of anisotropic hard magnets of 3D printed magnets

Within this work, we demonstrate in-situ easy-axis alignment of single-crystal magnetic particles inside a polymer matrix using fused filament fabrication. Two different magnetic materials are investigated: (i) Strontium hexaferrite inside a PA6 matrix, fill grade: 49 vol% and (ii) Samarium iron nitride inside a PA12 matrix, fill grade: 44 vol%. In the presence of the external alignment field, the strontium hexaferrite particles inside the PA6 matrix can be well aligned with a ratio of remanent magnetization to saturation magnetization of 0.7. No significant alignment for samarium iron nitride could be achieved. The results show the feasibility to fabricate magnets with arbitrary and locally defined easy axis using fused filament fabrication since the permanent magnets used for the alignment (or alternatively an electromagnet) can be mounted on a rotatable platform.

cond-mat.mtrl-sci↗

arXiv2021

Full analytical solution for the magnetic field of uniformly magnetized cylinder tiles

We present an analytical solution for the magnetic field of a homogeneously magnetized cylinder tile and by extension solutions for full cylinders, rings, cylinder sectors and ring segments. The derivation is done by direct integration in the magnetic surface charge picture. Results are closed-form expressions and elliptic integrals. All special cases are treated individually, which enables the field computation for all possible position arguments. An implementation is provided in Python together with a performance analysis. The implementation is tested against numerical solutions and applied to compute the magnetic field in a discrete Halbach cylinder.

physics.class-ph↗

arXiv2021

Proposal for a micromagnetic standard problem: domain wall pinning at phase boundaries

We propose a novel micromagnetic standard problem calculating the coercive field for unpinning a domain wall at the interface of a multiphase magnet. This problem is sensitive to discontinuities in material parameters for the exchange interaction, the uniaxial anisotropy, and the spontaneous magnetization. We derive an explicit treatment of jump conditions at material interfaces for the exchange interaction in the finite-difference discretization. The micromagnetic simulation results are compared with analytical solutions and show good agreement. The proposed standard problem is well-suited to test the implementation of both finite-difference and finite-element simulation codes.

physics.comp-ph↗

arXiv2021

Dipolar-stabilized first and second-order antiskyrmions in ferrimagnetic multilayers

Skyrmions and antiskyrmions are topologically protected spin structures with opposite topological charge. Particularly in coexisting phases, these two types of magnetic quasi-particles may show fascinating physics and potential for spintronic devices. While skyrmions are observed in a wide range of materials, until now antiskyrmions were exclusive to materials with D2d symmetry. In this work, we show first and second-order antiskyrmions stabilized by magnetic dipole-dipole interaction in Fe/Gd-based multilayers. We modify the magnetic properties of the multilayers by Ir insertion layers. Using Lorentz transmission electron microscopy imaging, we observe coexisting antiskyrmions, Bloch skyrmions, and type-2 bubbles and determine the range of material properties and magnetic fields where the different spin objects form and dissipate. We perform micromagnetic simulations to obtain more insight into the studied system and conclude that the reduction of saturation magnetization and uniaxial anisotropy leads to the existence of this zoo of different spin objects and that they are primarily stabilized by dipolar interaction.

cond-mat.mtrl-sci↗

arXiv2021

Tension-free Dirac strings and steered magnetic charges in 3D artificial spin ice

3D nano-architectures present a new paradigm in modern condensed matter physics with numerous applications in photonics, biomedicine, and spintronics. They are promising for the realisation of 3D magnetic nano-networks for ultra-fast and low-energy data storage. Frustration in these systems can lead to magnetic charges or magnetic monopoles, which can function as mobile, binary information carriers. However, Dirac strings in 2D artificial spin ices bind magnetic charges, while 3D dipolar counterparts require cryogenic temperatures for their stability. Here, we present a micromagnetic study of a highly-frustrated 3D artificial spin ice harboring tension-free Dirac strings with unbound magnetic charges at room temperature. We use micromagnetic simulations to demonstrate that the mobility threshold for magnetic charges is by $\SI{2}{eV}$ lower than their unbinding energy. By applying global magnetic fields, we steer magnetic charges in a given direction omitting unintended switchings. The introduced system paves a way towards 3D magnetic networks for data transport and storage

cond-mat.mes-hall↗

arXiv2020

Non-planar geometrical effects on the magnetoelectrical signal in a three-dimensional nanomagnetic circuit

Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a microelectronic circuit using direct-write nanofabrication. Due to the 3D vectorial nature of both electrical current and magnetisation, a complex superposition of several magnetoelectrical effects takes place. By performing electrical measurements under the application of 3D magnetic fields, in combination with macrospin simulations and finite element modelling, we disentangle the superimposed effects, finding how a 3D geometry leads to unusual angular dependences of well-known magnetotransport effects such as the anomalous Hall effect. Crucially, our analysis also reveals a strong role of the noncollinear demagnetising fields intrinsic to 3D nanostructures, which results in an angular dependent magnon magnetoresistance contributing strongly to the total magnetoelectrical signal. These findings are key to the understanding of 3D spintronic systems and underpin further fundamental and device-based studies.

cond-mat.mes-hall↗

arXiv2020

Chiral switching and dynamic barrier reductions in artificial square ice

Collective dynamics in lithographically-defined artificial spin ices offer profound insights into emergent correlations and phase transitions of geometrically-frustrated Ising spin systems. Their temporal and spatial evolution are often simulated using kinetic Monte Carlo simulations, which rely on the precise knowledge of the switching barriers to obtain predictive results in agreement with experimental observations. In many cases, however, the barriers are derived from simplified assumptions only, and do not take into account the full physical picture of nanomagnetic switching. Here we describe how the immediate magnetic environment of a nanomagnet reversing via quasi-coherent rotation can induce clockwise and counter-clockwise switching channels with different barrier energies. This barrier splitting for chiral reversal channels can be sizeable and, as string-method micromagnetic simulations show, is relevant for artificial spin ice systems made of both exchange -- as well as magnetostatically --dominated units. Due to the barrier splitting (and further reductions due to non-uniform reversal) transition rates can be exponentially enhanced by several orders of magnitude compared to mean-field predictions, especially in the limit of rare switching events where thermal excitation is less likely. This leads to significantly faster relaxation time scales and modified spatial correlations. Our findings are thus of integral importance to achieve realistic kinetic Monte Carlo simulations of emergent correlations in artificial spin systems, magnonic crystals, or the evolution of nanomagnetic logic circuits.

cond-mat.mes-hall↗

arXiv2020

Dependence of energy barrier reduction on collective excitations in square artificial spin ice: A comprehensive comparison of simulation techniques

We perform micromagnetic simulations to study the switching barriers in square artificial spin ice systems consisting of elongated single domain magnetic islands arranged on a square lattice. By considering a double vertex composed of one central island and six nearest neighbor islands, we calculate the energy barriers between two types of double vertices by applying the string method. We investigate by means of micromagnetic simulations the consequences of the neighboring islands, the inhomogeneities in the magnetization of the islands and the reversal mechanisms on the energy barrier by comparing three different approaches with increasing complexity. The micromagnetic models, where the string method is applied, are compared to the currently common method, the mean barrier approximation. Our investigations indicate that a proper micromagnetic modeling of the switching process leads to significantly lower energy barriers, by up to 35% compared to the mean-barrier approximation, so decreasing the expected average life time up to seven orders of magnitude. Hereby, we investigate the influence of parallel switching channels and the conceptional approach of using a mean-barrier to calculate the corresponding rates.

physics.comp-ph↗

arXiv2019

Hybrid FFT algorithm for fast demagnetization field calculations on non-equidistant magnetic layers

In micromagnetic simulations, the demagnetization field is by far the computationally most expensive field component and often a limiting factor in large multilayer systems. We present an exact method to calculate the demagnetization field of magnetic layers with arbitrary thicknesses. In this approach we combine the widely used fast-Fourier-transform based circular convolution method with an explicit convolution using a generalized form of the Newell formulas. We implement the method both for central processors and graphics processors and find that significant speedups for irregular multilayer geometries can be achieved. Using this method we optimize the geometry of a magnetic random-access memory cell by varying a single specific layer thickness and simulate a hysteresis curve to determine the resulting switching field.

physics.comp-ph↗

arXiv2019

Micromagnetics and spintronics: Models and numerical methods

Computational micromagnetics has become an indispensable tool for the theoretical investigation of magnetic structures. Classical micromagnetics has been successfully applied to a wide range of applications including magnetic storage media, magnetic sensors, permanent magnets and more. The recent advent of spintronics devices has lead to various extensions to the micromagnetic model in order to account for spin-transport effects. This article aims to give an overview over the analytical micromagnetic model as well as its numerical implementation. The main focus is put on the integration of spin-transport effects with classical micromagnetics.

physics.comp-ph↗

arXiv2018

GPU Accelerated Atomistic Energy Barrier Calculations of Skyrmion Annihilations

We present GPU accelerated simulations to calculate the annihilation energy of magnetic skyrmions in an atomistic spin model considering dipole-dipole, exchange, uniaxial-anisotropy and Dzyaloshinskii-Moriya interactions using the simplified string method. The skyrmion annihilation energy is directly related to its thermal stability and is a key measure for the applicability of magnetic skyrmions to storage and logic devices. We investigate annihilations mediated by Bloch points as well as annihilations via boundaries for various interaction energies. Both processes show similar behaviour, with boundary annihilations resulting in slightly smaller energy barriers than Bloch point annihilations.

physics.comp-ph↗

arXiv2018

Spin Torque Efficiency and Analytic Error Rate Estimates of Skyrmion Racetrack Memory

In this paper the thermal stability of skyrmion bubbles and the critical currents to move them over pinning sites is investigated. For the used pinning geometries and the used parameters, the unexpected behavior is reported that the energy barrier to overcome the pinning site is larger than the energy barrier of the annihilation of a skyrmion. The annihilation takes place at boundaries by current driven motion as well as due to the excitation over energy barriers, in the absence of currents, without forming Bloch points. It is reported that the pinning sites, which are required to allow thermally stable bits, significantly increase the critical current densities to move the bits in skyrmion like structures to about $j_{crit}$ = 0.62 TA/m$^2$. These currents are similar to those obtained experimentally to move stable skyrmions at room temperature. By calculating the thermal stability as well as the critical current, we can derive the spin torque efficiency $η$ = $Δ/I_c = 0.19 k_BT_{300}~/μ$A, which is in a similar range to the simulated spin torque efficiency of MRAM structures. Finally, it is shown that the stochastic depinning process of any racetrack like device requires extremely narrow depinning time distribution smaller than ~6% of the current pulse length to reach bit error rates smaller than ${10^{ - 9}}$.

cond-mat.mtrl-sci↗

arXiv2018

Large Scale Finite-Element Simulation of Micromagnetic Thermal Noise

An efficient method for the calculation of ferromagnetic resonant modes of magnetic structures is presented. Finite-element discretization allows flexible geometries and location dependent material parameters. The resonant modes can be used for a semi-analytical calculation of the power spectral density of the thermal white-noise, which is relevant for many sensor applications. The proposed method is validated by comparing the noise spectrum of a nano-disk with time-domain simulations.

physics.comp-ph↗

arXiv2018

Comparison of Sensitivity and Low Frequency Noise Contributions in GMR and TMR Spin Valve Sensors with a Vortex State Free Layer

Magnetoresistive spin valve sensors based on the giant- (GMR) and tunnelling- (TMR) magnetoresisitve effect with a flux-closed vortex state free layer design are compared by means of sensitivity and low frequency noise. The vortex state free layer enables high saturation fields with negligible hysteresis, making it attractive for applications with a high dynamic range. The measured GMR devices comprise lower pink noise and better linearity in resistance but are less sensitive to external magnetic fields than TMR sensors. The results show a comparable detectivity at low frequencies and a better performance of the TMR minimum detectable field at frequencies in the white noise limit.

physics.app-ph↗