arXiv subjects

Claudio Zeni

Publications and source records attributed to Claudio Zeni.

14 recordsLinked to original sources

arXiv2026

MatterSim-MT: A multi-task foundation model for in silico materials characterization

Accurate property characterization is a major bottleneck in materials design. While first-principles methods and task-specific machine-learning models have driven important progress, they remain fundamentally limited in scalability and generalizability across the vast space of structures and properties relevant to real-world materials design. We present MatterSim-MT, a multi-task foundation model for in silico materials simulation and property characterization. The model is pretrained on over 35 million first-principles-labeled structures covering 89 elements, temperatures up to 5000 K and pressures up to 1000 GPa, and is fine-tuned on various properties including Bader charges, magnetic moments, Born effective charges, and dielectric matrices. Out of the box, MatterSim-MT not only serves as a foundation model for predicting material structure, dynamics and thermodynamics, its multi-task architecture also enables a wide range of complex simulations that cannot be captured by potential energy surfaces alone. For example, we demonstrate pressure-dependent LO-TO phonon splitting in SiC with close agreement with experiment, electric hysteresis in ferroelectric BaTiO3, and the cationic-to-anionic redox transition during delithiation of a Li-rich cathode material. Finally, we show that MatterSim-MT scales well with more data and parameters, can be efficiently fine-tuned to higher levels of theory, and can be efficiently extended to new systems via active learning. Overall, we believe this approach provides a scalable route to accurate in silico materials characterization.

cond-mat.mtrl-sci↗

arXiv2025

Probing the Limit of Heat Transfer in Inorganic Crystals with Deep Learning

Heat transfer is a fundamental property of matter. Research spanning decades has attempted to discover materials with exceptional thermal conductivity, yet the upper limit remains unknown. Using deep learning accelerated crystal structure prediction and first-principles calculation, we systematically explore the thermal conductivity landscape of inorganic crystals. We brute-force over half a million ordered crystalline structures, encompassing an extensive coverage of local energy minima in binary compounds with up to four atoms per primitive cell. We confirm diamond sets the upper bound of thermal conductivity within our search space, very likely also among all stable crystalline solids at ambient conditions. We also identify over 20 novel crystals surpassing silicon in thermal conductivity, validated by density functional theory. These include a semiconductor TaN with ultrahigh thermal conductivity (~900 $\mathrm{W\cdot m^{-1}\cdot K^{-1}}$), and metallic compounds such as MnV that exhibit high lattice and electronic thermal conductivity simultaneously, a distinctive feature not observed before. These results as well as the deep learning-driven screening method, redefine the landscape of thermal transport and establish a large open-access database for future materials discovery.

cond-mat.mtrl-sci↗

arXiv2025

UniGenX: a unified generative foundation model that couples sequence, structure and function to accelerate scientific design across proteins, molecules and materials

Function in natural systems arises from one-dimensional sequences forming three-dimensional structures with specific properties. However, current generative models suffer from critical limitations: training objectives seldom target function directly, discrete sequences and continuous coordinates are optimized in isolation, and conformational ensembles are under-modeled. We present UniGenX, a unified generative foundation model that addresses these gaps by co-generating sequences and coordinates under direct functional and property objectives across proteins, molecules, and materials. UniGenX represents heterogeneous inputs as a mixed stream of symbolic and numeric tokens, where a decoder-only autoregressive transformer provides global context and a conditional diffusion head generates numeric fields steered by task-specific tokens. Besides the new high SOTAs on structure prediction tasks, the model demonstrates state-of-the-art or competitive performance for the function-aware generation across domains: in materials, it achieves "conflicted" multi-property conditional generation, yielding 436 crystal candidates meeting triple constraints, including 11 with novel compositions; in chemistry, it sets new benchmarks on five property targets and conformer ensemble generation on GEOM; and in biology, it improves success in modeling protein induced fit (RMSD < 2 {\AA}) by over 23-fold and enhances EC-conditioned enzyme design. Ablation studies and cross-domain transfer substantiate the benefits of joint discrete-continuous training, establishing UniGenX as a significant advance from prediction to controllable, function-aware generation.

cs.LG↗

arXiv2024

MatterSim: A Deep Learning Atomistic Model Across Elements, Temperatures and Pressures

Accurate and fast prediction of materials properties is central to the digital transformation of materials design. However, the vast design space and diverse operating conditions pose significant challenges for accurately modeling arbitrary material candidates and forecasting their properties. We present MatterSim, a deep learning model actively learned from large-scale first-principles computations, for efficient atomistic simulations at first-principles level and accurate prediction of broad material properties across the periodic table, spanning temperatures from 0 to 5000 K and pressures up to 1000 GPa. Out-of-the-box, the model serves as a machine learning force field, and shows remarkable capabilities not only in predicting ground-state material structures and energetics, but also in simulating their behavior under realistic temperatures and pressures, signifying an up to ten-fold enhancement in precision compared to the prior best-in-class. This enables MatterSim to compute materials' lattice dynamics, mechanical and thermodynamic properties, and beyond, to an accuracy comparable with first-principles methods. Specifically, MatterSim predicts Gibbs free energies for a wide range of inorganic solids with near-first-principles accuracy and achieves a 15 meV/atom resolution for temperatures up to 1000K compared with experiments. This opens an opportunity to predict experimental phase diagrams of materials at minimal computational cost. Moreover, MatterSim also serves as a platform for continuous learning and customization by integrating domain-specific data. The model can be fine-tuned for atomistic simulations at a desired level of theory or for direct structure-to-property predictions, achieving high data efficiency with a reduction in data requirements by up to 97%.

cond-mat.mtrl-sci↗

arXiv2023

MatterGen: a generative model for inorganic materials design

The design of functional materials with desired properties is essential in driving technological advances in areas like energy storage, catalysis, and carbon capture. Generative models provide a new paradigm for materials design by directly generating entirely novel materials given desired property constraints. Despite recent progress, current generative models have low success rate in proposing stable crystals, or can only satisfy a very limited set of property constraints. Here, we present MatterGen, a model that generates stable, diverse inorganic materials across the periodic table and can further be fine-tuned to steer the generation towards a broad range of property constraints. To enable this, we introduce a new diffusion-based generative process that produces crystalline structures by gradually refining atom types, coordinates, and the periodic lattice. We further introduce adapter modules to enable fine-tuning towards any given property constraints with a labeled dataset. Compared to prior generative models, structures produced by MatterGen are more than twice as likely to be novel and stable, and more than 15 times closer to the local energy minimum. After fine-tuning, MatterGen successfully generates stable, novel materials with desired chemistry, symmetry, as well as mechanical, electronic and magnetic properties. Finally, we demonstrate multi-property materials design capabilities by proposing structures that have both high magnetic density and a chemical composition with low supply-chain risk. We believe that the quality of generated materials and the breadth of MatterGen's capabilities represent a major advancement towards creating a universal generative model for materials design.

cond-mat.mtrl-sci↗

arXiv2022

DADApy: Distance-based Analysis of DAta-manifolds in Python

DADApy is a python software package for analysing and characterising high-dimensional data manifolds. It provides methods for estimating the intrinsic dimension and the probability density, for performing density-based clustering and for comparing different distance metrics. We review the main functionalities of the package and exemplify its usage in toy cases and in a real-world application. DADApy is freely available under the open-source Apache 2.0 license.

cs.LG↗

arXiv2021

Exploring the robust extrapolation of high-dimensional machine learning potentials

We show that, contrary to popular assumptions, predictions from machine learning potentials built upon high-dimensional atom-density representations almost exclusively occur in regions of the representation space which lie outside the convex hull defined by the training set points. We then propose a perspective to rationalize the domain of robust extrapolation and accurate prediction of atomistic machine learning potentials in terms of the probability density induced by training points in the representation space

physics.comp-ph↗

arXiv2021

Data-driven simulation and characterisation of gold nanoparticle melting

The simulation and analysis of the thermal stability of nanoparticles, a stepping stone towards their application in technological devices, require fast and accurate force fields, in conjunction with effective characterisation methods. In this work, we develop efficient, transferable, and interpretable machine learning force fields for gold nanoparticles based on data gathered from Density Functional Theory calculations. We use them to investigate the thermodynamic stability of gold nanoparticles of different sizes (1 to 6 nm), containing up to 6266 atoms, concerning a solid-liquid phase change through molecular dynamics simulations. We predict nanoparticle melting temperatures in good agreement with available experimental data. Furthermore, we characterize the solid-liquid phase change mechanism employing an unsupervised learning scheme to categorize local atomic environments. We thus provide a data-driven definition of liquid atomic arrangements in the inner and surface regions of a nanoparticle and employ it to show that melting initiates at the outer layers.

physics.comp-ph↗

arXiv2021

Compact atomic descriptors enable accurate predictions via linear models

We probe the accuracy of linear ridge regression employing a three-body local density representation derived from the atomic cluster expansion. We benchmark the accuracy of this framework in the prediction of formation energies and atomic forces in molecules and solids. We find that such a simple regression framework performs on par with state-of-the-art machine learning methods which are, in most cases, more complex and more computationally demanding. Subsequently, we look for ways to sparsify the descriptor and further improve the computational efficiency of the method. To this aim, we use both principal component analysis and least absolute shrinkage operator regression for energy fitting on six single-element datasets. Both methods highlight the possibility of constructing a descriptor that is four times smaller than the original with a similar or even improved accuracy. Furthermore, we find that the reduced descriptors share a sizable fraction of their features across the six independent datasets, hinting at the possibility of designing material-agnostic, optimally compressed, and accurate descriptors.

physics.comp-ph↗

arXiv2021

Ranking the information content of distance measures

Real-world data typically contain a large number of features that are often heterogeneous in nature, relevance, and also units of measure. When assessing the similarity between data points, one can build various distance measures using subsets of these features. Using the fewest features but still retaining sufficient information about the system is crucial in many statistical learning approaches, particularly when data are sparse. We introduce a statistical test that can assess the relative information retained when using two different distance measures, and determine if they are equivalent, independent, or if one is more informative than the other. This in turn allows finding the most informative distance measure out of a pool of candidates. The approach is applied to find the most relevant policy variables for controlling the Covid-19 epidemic and to find compact yet informative representations of atomic structures, but its potential applications are wide ranging in many branches of science.

stat.ML↗

arXiv2019

On Machine Learning Force Fields for Metallic Nanoparticles

Machine learning algorithms have recently emerged as a tool to generate force fields which display accuracies approaching the ones of the ab-initio calculations they are trained on, but are much faster to compute. The enhanced computational speed of machine learning force fields results key for modelling metallic nanoparticles, as their fluxionality and multi-funneled energy landscape needs to be sampled over long time scales. In this review, we first formally introduce the most commonly used machine learning algorithms for force field generation, briefly outlining their structure and properties. We then address the core issue of training database selection, reporting methodologies both already used and yet unused in literature. We finally report and discuss the recent literature regarding machine learning force fields to sample the energy landscape and study the catalytic activity of metallic nanoparticles.

physics.comp-ph↗

arXiv2019

Building nonparametric $n$-body force fields using Gaussian process regression

Constructing a classical potential suited to simulate a given atomic system is a remarkably difficult task. This chapter presents a framework under which this problem can be tackled, based on the Bayesian construction of nonparametric force fields of a given order using Gaussian process (GP) priors. The formalism of GP regression is first reviewed, particularly in relation to its application in learning local atomic energies and forces. For accurate regression it is fundamental to incorporate prior knowledge into the GP kernel function. To this end, this chapter details how properties of smoothness, invariance and interaction order of a force field can be encoded into corresponding kernel properties. A range of kernels is then proposed, possessing all the required properties and an adjustable parameter $n$ governing the interaction order modelled. The order $n$ best suited to describe a given system can be found automatically within the Bayesian framework by maximisation of the marginal likelihood. The procedure is first tested on a toy model of known interaction and later applied to two real materials described at the DFT level of accuracy. The models automatically selected for the two materials were found to be in agreement with physical intuition. More in general, it was found that lower order (simpler) models should be chosen when the data are not sufficient to resolve more complex interactions. Low $n$ GPs can be further sped up by orders of magnitude by constructing the corresponding tabulated force field, here named "MFF".

physics.comp-ph↗

arXiv2018

Building machine learning force fields for nanoclusters

We assess Gaussian process (GP) regression as a technique to model interatomic forces in metal nanoclusters by analysing the performance of 2-body, 3-body and many-body kernel functions on a set of 19-atom Ni cluster structures. We find that 2-body GP kernels fail to provide faithful force estimates, despite succeeding in bulk Ni systems. However, both 3- and many-body kernels predict forces within a $\sim$0.1 eV/$\textÅ$ average error even for small training datasets, and achieve high accuracy even on out-of-sample, high temperature, structures. While training and testing on the same structure always provides satisfactory accuracy, cross-testing on dissimilar structures leads to higher prediction errors, posing an extrapolation problem. This can be cured using heterogeneous training on databases that contain more than one structure, which results in a good trade-off between versatility and overall accuracy. Starting from a 3-body kernel trained this way, we build an efficient non-parametric 3-body force field that allows accurate prediction of structural properties at finite temperatures, following a newly developed scheme [Glielmo et al. PRB 97, 184307 (2018)]. We use this to assess the thermal stability of Ni$_{19}$ nanoclusters at a fractional cost of full ab initio calculations.

physics.comp-ph↗

arXiv2018

Efficient nonparametric $n$-body force fields from machine learning

We provide a definition and explicit expressions for $n$-body Gaussian Process (GP) kernels which can learn any interatomic interaction occurring in a physical system, up to $n$-body contributions, for any value of $n$. The series is complete, as it can be shown that the "universal approximator" squared exponential kernel can be written as a sum of $n$-body kernels. These recipes enable the choice of optimally efficient force models for each target system, as confirmed by extensive testing on various materials. We furthermore describe how the $n$-body kernels can be "mapped" on equivalent representations that provide database-size-independent predictions and are thus crucially more efficient. We explicitly carry out this mapping procedure for the first non-trivial (3-body) kernel of the series, and show that this reproduces the GP-predicted forces with $\text{meV/} Å$ accuracy while being orders of magnitude faster. These results open the way to using novel force models (here named "M-FFs") that are computationally as fast as their corresponding standard parametrised $n$-body force fields, while retaining the nonparametric character, the ease of training and validation, and the accuracy of the best recently proposed machine learning potentials.

physics.comp-ph↗