Searcharxiv⌕ Search

arXiv subjects

Clivia M. Sotomayor Torres

Publications and source records attributed to Clivia M. Sotomayor Torres.

17 recordsLinked to original sources
arXiv2026

Phonon-Mediated Thermal Transport in Nanocrystalline Silicon Using Machine-Learning Interatomic Potentials

Understanding phonon-mediated heat transport in structurally complex materials remains a central challenge for next-generation electronic and nanomechanical devices, where grain boundaries and interfacial disorder strongly limit thermal dissipation. Although classical interatomic potentials enable large-scale simulations, their limited transferability can lead to inaccuracies in vibrational properties and interfacial phonon scattering. In this work, we develop a machine learning-based framework for modeling thermal transport in bulk and nanocrystalline silicon by combining Gaussian approximation potential and multi-atomic cluster expansion models with lattice-dynamical calculations and molecular dynamics. Harmonic and anharmonic force constants derived from machine-learning interatomic potentials (MLIPs) are used within a unified Phonopy/Phono3py workflow to compute phonon dispersions, lifetimes, and lattice thermal conductivity, providing an internally consistent description of vibrational properties. In nanocrystalline silicon, non-equilibrium molecular dynamics simulations directly quantify the thermal boundary resistance associated with grain boundaries and reveal its sensitivity to interfacial roughness and the underlying interatomic description. Compared with the Stillinger-Weber and Tersoff potentials, the MLIPs provide a quantitatively accurate and internally consistent description of bulk and interfacial phonon transport, enabling better predictive modeling of nanoscale thermal transport in low-dimensional materials.

cond-mat.mtrl-sci↗
arXiv2026

Dynamics of confined acoustic phonon modes in nanocrystalline silicon membranes

We report femtosecond time-resolved measurements of confined acoustic phonons in free-standing nanocrystalline silicon membranes and compare them with the crystalline silicon counterpart. While the latter exhibit well-resolved higher-order modes, a strong suppression of these modes is observed in nanocrystalline samples. The suppression is strongly frequency dependent and becomes more pronounced as the phonon wavelength approaches the characteristic grain size. Analysis of the phonon lifetimes reveals an additional frequency-dependent scattering mechanism in nanocrystalline silicon, with a scattering rate that scales approximately as $f^2$, where $f$ is the phonon frequency. The measured sound velocity is consistent with previous reports for nanocrystalline silicon and indicates an effective elastic response arising from multiple crystallographic orientations. These results establish coherent phonons as a sensitive probe of microstructure-dependent scattering in nanocrystalline materials and indicate that grain boundaries act as an effective spectral filter for high-frequency acoustic phonons.

physics.optics↗
arXiv2026

From Amorphous to Amorphous-Crystalline Mixed-Phase Boron Nitride: Evolution of the Thermal and Elastic Properties

Amorphous boron nitride (aBN) is a promising dielectric and protective coating, yet its nanoscale heat dissipation and elastic response remain poorly quantified. Here we synthesize a variety of BN thin films by borazine-based chemical vapor deposition (800-1000 C) and study the temperature-driven structural transition from fully amorphous networks to mixed amorphous-crystalline films with embedded BN nanocrystallites.Frequency-domain thermoreflectance data show an ultralow, thickness-dependent cross-plane thermal conductivity for aBN (kout < 0.5 W m-1 K-1 for 10-40 nm), which increases systematically with crystalline order up to 1.5 W m-1 K-1. Micro-Brillouin light scattering and finite-element modelling reveal a concomitant stiffening, with Young's modulus rising from 7.5 +/- 0.7 GPa (800 C) to 53 +/- 5 GPa (1000 C). Green-Kubo molecular dynamics simulations rationalize these trends via bonding topology and vibrational transport, and highlight how oxygen, hydrogen and carbon impurities and composition provide practical knobs to further tune the thermal and mechanical responses in BN films for improving nano-electronics, interconnects and coating applications.

cond-mat.mtrl-sci↗
arXiv2023

Engineering heat transport across epitaxial lattice-mismatched van der Waals heterointerfaces

Artificially engineered 2D materials offer unique physical properties for thermal management, surpassing naturally occurring materials. Here, using van der Waals epitaxy, we demonstrate the ability to engineer extremely insulating ultra-thin thermal metamaterials based on crystalline lattice-mismatched Bi2Se3/MoSe2 superlattices and graphene/PdSe2 heterostructures with exceptional thermal resistances (70-202 m^2K/GW) and ultralow cross-plane thermal conductivities (0.01-0.07 Wm^-1K^-1) at room temperature, comparable to those of amorphous materials. Experimental data obtained using frequency-domain thermoreflectance and low-frequency Raman spectroscopy, supported by tight-binding phonon calculations, reveal the impact of lattice mismatch, phonon-interface scattering, size effects, temperature and interface thermal resistance on cross-plane heat dissipation, uncovering different thermal transport regimes and the dominant role of long-wavelength phonons. Our findings provide essential insights into emerging synthesis and thermal characterization methods and valuable guidance for the development of large-area heteroepitaxial van der Waals films of dissimilar materials with tailored thermal transport characteristics.

cond-mat.mtrl-sci↗
arXiv2022

Thermal insulation and heat guiding using nanopatterned MoS2

In the modern electronics overheating is one of the major reasons for device failure. Overheating causes irreversible damage to circuit components and can also lead to fire, explosions, and injuries. Accordingly, in the advent of 2D material-based electronics, an understanding of their thermal properties in addition to their electric ones is crucial to enable efficient transfer of excess heat away from the electronic components. In this work we propose structures based on free-standing, few-layer, nanopatterned MoS2 that insulate and guide heat in the in-plane direction. We arrive at these designs via a thorough study of the in-plane thermal conductivity as a function of thickness, porosity, and temperature in both pristine and nanopatterned MoS2 membranes. Two-laser Raman thermometry was employed to measure the thermal conductivities of a set of free-standing MoS2 flakes with diameters greater than 20 um and thicknesses from 5 to 40 nm, resulting in values from 30 to 85 W/mK, respectively. After nanopatterning a square lattice of 100-nm diameter holes with a focused ion beam we have obtained a greater than 10-fold reduction of the thermal conductivities for the period of 500 nm and values below 1 W/mK for the period of 300 nm. The results were supported by equilibrium molecular dynamic simulations for both pristine and nanopatterned MoS2. The selective patterning of certain areas results in extremely large difference in thermal conductivities within the same material. Exploitation of this effect enabled for the first time thermal insulation and heat guiding in the few-layer MoS2. The patterned regions act as high thermal resistors: we obtained a thermal resistance of 4x10-6 m2K/W with only four patterned lattice periods of 300 nm, highlighting the significant potential of MoS2 for thermal management applications.

cond-mat.mes-hall↗
arXiv2021

Phonon dynamics and thermal conductivity of PtSe2 thin films: Impact of crystallinity and film thickness on heat dissipation

We present a comparative investigation of the influence of crystallinity and film thickness on the acoustic and thermal properties of 2D layered PtSe2 thin films of varying thickness (0.6-24 nm) by combining a set of experimental techniques, namely, frequency domain thermo-reflectance, low-frequency Raman and pump-probe coherent phonon spectroscopy. We find a 35% reduction in the cross-plane thermal conductivity of polycrystalline films with thickness larger than 12 nm compared to the crystalline films of the same thickness due to phonon grain boundary scattering. Density functional theory calculations are in good agreement with the experiments and further reveal the ballistic nature of cross-plane heat transport in PtSe2 up to a certain thickness (~20 nm). In addition, our experiments revealed strong interlayer interactions in PtSe2, short acoustic phonon lifetimes in the range of picoseconds, out-of-plane elastic constant C33=31.8 GPa and layer-dependent group velocity ranging from 1340 m/s in bilayer PtSe2 to 1873 m/s in 8 layers of PtSe2. The potential of tuning the lattice cross-plane thermal conductivity of layered 2D materials with the level of crystallinity and the real-time observation of coherent phonon dynamics, which have direct implications on the cooling and transport of electrons, open a new playground for research in 2D thermoelectric devices and provide guidelines for thermal management in 2D electronics.

cond-mat.mtrl-sci↗
arXiv2021

Heat dissipation in few-layer MoS2 and MoS2/hBN heterostructure

State-of-the-art fabrication and characterization techniques have been employed to measure the thermal conductivity of suspended, single-crystalline MoS2 and MoS2/hBN heterostructures. Two-laser Raman scattering thermometry was used combined with real time measurements of the absorbed laser power, which allowed us to determine the thermal conductivities without any assumptions. Measurements on MoS2 layers with thicknesses of 5 and 14 exhibit thermal conductivity in the range between 12 and 24 Wm-1K-1. Additionally, after determining the thermal conductivity of a selected MoS2 sample, an hBN flake was transferred onto it and the effective thermal conductivity of the heterostructure was subsequently measured. Remarkably, despite that the thickness of the hBN layer was less than a third of the thickness of the MoS2 layer, the heterostructure showed an almost eight-fold increase in the thermal conductivity, being able to dissipate more than 10 times the laser power without any visible sign of damage. These results are consistent with a high thermal interface conductance between MoS2 and hBN and an efficient in-plane heat spreading driven by hBN. Indeed, we estimate G 70 MWm-2K-1 which is significantly higher than previously reported values. Our work therefore demonstrates that the insertion of hBN layers in potential MoS2 based devices holds the promise for efficient thermal management.

cond-mat.mes-hall↗
arXiv2020

Thermal transport in nanoporous holey silicon membranes investigated with optically-induced transient thermal gratings

In this study, we use the transient thermal grating optical technique \textemdash a non-contact, laser-based thermal metrology technique with intrinsically high accuracy \textemdash to investigate room-temperature phonon-mediated thermal transport in two nanoporous holey silicon membranes with limiting dimensions of 100 nm and 250 nm respectively. We compare the experimental results to ab initio calculations of phonon-mediated thermal transport according to the phonon Boltzmann transport equation (BTE) using two different computational techniques. We find that the calculations conducted within the Casimir framework, i.e. based on the BTE with the bulk phonon dispersion and diffuse scattering from surfaces, are in quantitative agreement with the experimental data, and thus conclude that this framework is adequate for describing phonon-mediated thermal transport through holey silicon membranes with feature sizes on the order of 100 nm.

cond-mat.mes-hall↗
arXiv2018

Thermal conductivity of disordered porous membranes

We report measurements and Monte Carlo simulations of thermal conductivity of porous 100nm- thick silicon membranes, in which size, shape and position of the pores were varied randomly. Measurements using 2-laser Raman thermometry on both plain membrane and porous membranes revealed more than 10-fold reduction of thermal conductivity compared to bulk silicon and six-fold reduction compared to non-patterned membrane for the sample with 37% filling fraction. Using Monte Carlo solution of the Boltzmann transport equation for phonons we compared different possibilities of pore organization and its influence on the thermal conductivity of the samples. The simulations confirmed that the strongest reduction of thermal conductivity is achieved for a distribution of pores with arbitrary shapes that partly overlap. Up to 15% reduction of thermal conductivity with respect to the purely circular pores was predicted for a porous membrane with 37% filling fraction. The effect of pore shape, distribution and surface roughness is further discussed.

physics.app-ph↗
arXiv2016

Two-Dimensional Phononic Crystals: Disorder Matters

The design and fabrication of phononic crystals (PnCs) hold the key to control the propagation of heat and sound at the nanoscale. However, there is a lack of experimental studies addressing the impact of order/disorder on the phononic properties of PnCs. Here, we present a comparative investigation of the influence of disorder on the hypersonic and thermal properties of two-dimensional PnCs. PnCs of ordered and disordered lattices are fabricated of circular holes with equal filling fractions in free-standing Si membranes. Ultrafast pump and probe spectroscopy (asynchronous optical sampling) and Raman thermometry based on a novel two-laser approach are used to study the phononic properties in the gigahertz (GHz) and terahertz (THz) regime, respectively. Finite element method simulations of the phonon dispersion relation and three-dimensional displacement fields furthermore enable the unique identification of the different hypersonic vibrations. The increase of surface roughness and the introduction of short-range disorder are shown to modify the phonon dispersion and phonon coherence in the hypersonic (GHz) range without affecting the room-temperature thermal conductivity. On the basis of these findings, we suggest a criteria for predicting phonon coherence as a function of roughness and disorder.

cond-mat.mtrl-sci↗
arXiv2015

Optical and mechanical properties of nanofibrillated cellulose: towards a robust platform for next-generation green technologies

Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in Nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. The results obtained show the precise determination of significant properties as elastic properties and interactions that are compared with similar works and, moreover, demonstrate that nanofibrillated cellulose properties can be reversibly controlled, supporting the extended potential of nanofibrillated cellulose as a robust platform for green-technology applications

cond-mat.mtrl-sci↗
arXiv2014

Reconstructing phonon mean free path contributions to thermal conductivity using nanoscale membranes

Knowledge of the mean free path distribution of heat-carrying phonons is key to understanding phonon-mediated thermal transport. We demonstrate that thermal conductivity measurements of thin membranes spanning a wide thickness range can be used to characterize how bulk thermal conductivity is distributed over phonon mean free paths. A non-contact transient thermal grating technique was used to measure the thermal conductivity of suspended Si membranes ranging from 15 to 1500 nm in thickness. A decrease in the thermal conductivity from 74% to 13% of the bulk value is observed over this thickness range, which is attributed to diffuse phonon boundary scattering. Due to the well-defined relation between the membrane thickness and phonon mean free path suppression, combined with the range and accuracy of the measurements, we can reconstruct the bulk thermal conductivity accumulation vs. phonon mean free path, and compare with theoretical models.

cond-mat.mes-hall↗
arXiv2014

A self-stabilized coherent phonon source driven by optical forces

Optical forces can set tiny objects into states of coherent mechanical oscillation, also known as mechanical or phonon lasing. We present a novel pumping mechanism in an opto-mechanical photonic crystal that realizes mechanical lasing with relaxed requirements for the optical-mechanical modes and their inter-coupling. It derives from a spontaneously triggered thermal/free carrier self-pulsing and the anharmonic modulation of the radiation pressure force that comes as a consequence. Moreover, the feedback of the mechanics on the self-pulsing frequency-entrains both oscillators, creating a self-stabilized indecomposable system. A manifold of frequency-entrained regions with two different mechanical modes (at 54 and 122 MHz) are observed as a result of the wide tuneability of the natural frequency of the self-pulsing. The system operates at ambient conditions of pressure and temperature in a silicon compatible platform, which enables its exploitation in sensing, intra-chip metrology or time-keeping applications.

physics.optics↗
arXiv2013

Ultra-Thin Free-Standing Single Crystalline Silicon Membranes With Strain Control

We report on fabrication and characterization of ultra-thin suspended single crystalline flat silicon membranes with thickness down to 6 nm. We have developed a method to control the strain in the membranes by adding a strain compensating frame on the silicon membrane perimeter to avoid buckling of the released membranes. We show that by changing the properties of the frame the strain of the membrane can be tuned in controlled manner. Consequently, both the mechanical properties and the band structure can be engineered and the resulting membranes provide a unique laboratory to study low-dimensional electronic, photonic and phononic phenomena.

cond-mat.mes-hall↗
arXiv2012

Direct Measurement of Room Temperature Non-diffusive Thermal Transport Over Micron Distances in a Silicon Membrane

The "textbook" phonon mean free path (MFP) of heat carrying phonons in silicon at room temperature is ~40 nm. However, a large contribution to the thermal conductivity comes from low-frequency phonons with much longer MFPs. We present a simple experiment demonstrating that room temperature thermal transport in Si significantly deviates from the diffusion model already at micron distances. Absorption of crossed laser pulses in a freestanding silicon membrane sets up a sinusoidal temperature profile that is monitored via diffraction of a probe laser beam. By changing the period of the thermal grating we vary the heat transport distance within the range ~1-10 μm. At small distances, we observe a reduction in the effective thermal conductivity indicating a transition from the diffusive to the ballistic transport regime for the low-frequency part of the phonon spectrum.

cond-mat.mtrl-sci↗
arXiv2000

Periodic thin-film interference filters as one-dimensional photonic crystals

We review photonic band gap related properties of a simple periodic system of thin dielectric layers. Properties associated with forbidden and allowed bands of such one-dimensional photonic crystals are presented. A revision of forbidden bands properties leads to an omnidirectional Bragg mirror design. The anisotropy of allowed bands suggests the formation of photon-focusing caustics in one-dimensional photonic crystals.

cond-mat.soft↗