arXiv subjects

Cunhua Pan

Publications and source records attributed to Cunhua Pan.

At least 19 recordsLinked to original sources

arXiv2026

An Optical Pathway to Movable Rydberg Atomic Quantum Receivers

This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.

eess.AS↗

arXiv2026

AFDM-ISAC With Fractional Delay-Doppler Coupling

Affine frequency division multiplexing (AFDM) is a promising chirp-based multicarrier waveform for high-mobility integrated sensing and communication (ISAC). Accurate angle, delay, and Doppler estimation is essential for AFDM sensing. Since target delays and Doppler shifts are generally continuous-valued, representing them on a discrete delay--Doppler grid causes energy leakage and peak displacement in the discrete affine Fourier transform (DAFT) domain. The AFDM chirp also induces delay--Doppler coupling in the DAFT-domain response. The resulting DAFT-domain matching-score surface exhibits a local ridge that is not aligned with the normalized-delay and normalized-Doppler axes. To address these issues, this paper investigates joint estimation of angle and continuous-valued delay--Doppler parameters for a colocated AFDM-ISAC sensing architecture. A transform-domain sparse sensing model is formulated from the fractional DAFT-domain response. Based on this model, a coupled-coordinate Newtonized orthogonal matching pursuit (CC-NOMP) estimator is developed. CC-NOMP uses the AFDM-induced coupling coordinate to parameterize the dominant local ridge. It combines coupled-coordinate Newton refinement with safeguarded updates, coupling-aligned delay refinement, and cyclic multi-target refinement to estimate angle, continuous normalized delay, and normalized Doppler. A deterministic Cram\'er--Rao bound and a dominant-order complexity analysis are also derived. Simulation results with continuous-valued off-grid target parameters show that CC-NOMP achieves lower delay and Doppler error floors than the considered baselines while maintaining comparable angle-estimation accuracy.

cs.IT↗

arXiv2026

Secure Relay Low-Altitude Networks via Hybrid Fixed-Position and Rotatable Antenna Arrays

In this paper, a relay network with hybrid fixed-position and rotatable antenna arrays is proposed. The deployment of rotatable arrays in conventional relay networks is considered to provide more secure communications for low-altitude economy applications. Specifically, both the base station and the relay station are equipped with fixed-position antenna arrays and rotatable arrays to serve ground users and aerial users, respectively. To address the challenge of multi-user interference, a low-cost reconfigurable intelligent surface is exploited as a candidate path. Accordingly, under constraints on transmit power, user quality of service, rotatable range, and path selection, the objective is to maximize the worst-case secrecy rate (SR) through joint beamforming, power allocation, and rotatable antenna orientation design. First, the SR performance in the single-user scenario is investigated, and a step-by-step leakage-based scheme is proposed. Then, the general multi-user scenario is studied, and a Distributional Soft Actor-Critic with Three refinements (DSAC-T)-based learning scheme, which supports hybrid discrete and continuous actions, is proposed to maximize the worst-case SR. Simulation results validate the effectiveness of the proposed schemes. The proposed schemes achieve approximately a twofold improvement in SR performance compared to isotropic antennas. The proposed system achieves approximately 71.4\% power saving, 55\% antenna saving, and can serve more users.

eess.SP↗

arXiv2026

Cross-Field Channel Parameter Estimation and Channel Characterization at THz Bands in Indoor Scenarios

The terahertz (THz) frequency band offers the potential for ultra-high data rate transmission in future wireless communication systems. To extend the transmission distance and enhance spectral efficiency, the deployment of large-scale antenna arrays emerges as a promising solution in the THz band. This paper targets the critical challenge of cross-field (hybrid near-field/far-field) channel parameter estimation and channel characterization in such configurations. We first establish a 260-380 GHz virtual uniform linear array (ULA) measurement framework in an indoor scenario, capturing high-resolution channel transfer functions (CTFs) that reveal spatial non-stationarity and cross-field wavefront characteristics. Building upon these empirical observations, we propose a cross-field space-alternating generalized expectation-maximization (SAGE) algorithm that discriminatively estimates near-field and far-field multipath components (MPCs) via Bayesian phase-curvature classification, while explicitly tracking spatial birth-death phenomena through visibility region estimation. Analysis of the measurement data validates the algorithm's effectiveness in resolving cross-field MPCs and quantifies that near-field MPCs account for over 90% of total MPCs at 2 m transmission distance (380 GHz). We observe that spatial non-stationarity intensifies as the carrier frequency increases and the transmission distance decreases. These findings offer quantitative guidelines for channel modeling and system design in wireless THz communication systems.

eess.SP↗

arXiv2026

Cell-Level Channel Shaping for Rydberg Atomic Quantum Receivers in Satellite Uplinks With Doppler-Enabled Superheterodyne Reception

In this paper, we propose a self-superheterodyne Rydberg uniform array receiver for satellite uplink communications, in which the Doppler shift naturally induced by satellite motion is exploited to generate the intermediate-frequency signal. We first develop a near-field local oscillator (LO) synthesis model and characterize the spatially varying LO electric field across the Rydberg vapor cells. Based on a vapor-cell-center approximation, a closed-form radio frequency (RF)-to-optical conversion is derived, establishing an explicit bridge between the incident satellite signal and the LO-induced cell-level response. The derived model reveals that the programmable LO serves as an analog-domain channel-shaping mechanism by controlling the cell-level transduction gain, phase response, and phase-matching behavior. Building upon this equivalent channel model, we formulate an LO design problem that maximizes the Shannon capacity of the effective channel, and develop an efficient optimization algorithm for the LO amplitudes and phases. Simulation results demonstrate that the vapor-cell transduction can reshape the effective channel, adjust the beam-pattern alignment, and moderately reduce the inter-user correlation under suitable LO configurations. Furthermore, the proposed LO design significantly improves the achievable capacity over benchmark schemes, offering a promising self-superheterodyne Rydberg architecture for future satellite communication systems.

eess.SP↗

arXiv2026

Explainable Task-Oriented Token Communication for AI-Native 6G Networks

The integration of Foundation Models (FMs) and wireless communications is driving the evolution of image communication from bit-accurate transmission toward task-oriented transmission. However, existing task-oriented image communication methods still face three major challenges: insufficient task-oriented Token representation, inadequate collaboration between Visual Tokens and Task Tokens, and limited interpretability of task decisions. To address these challenges, we propose an Explainable Task-Oriented Token Communication (ET-TokenCom) framework. By treating Tokens as unified units for information representation and transmission, the proposed framework constructs an end-to-end communication link that spans visual perception, wireless transmission, and task reasoning. At the transmitter, the ET-TokenCom framework extracts Visual Tokens from images to preserve low-level visual information. Meanwhile, Task Tokens generated by the FM are introduced to represent the target information and decision intent required by the current task. A Cross-Modal Attention (CMA) fusion mechanism is further designed, enabling Task Tokens to explicitly guide the selection, weighting, and transmission of Visual Tokens. At the receiver, the framework integrates Token decoding with an explainable output mechanism, where attention heatmaps are generated to highlight critical perceptual regions under different task objectives and reveal the influence of Task Tokens on the outputs. Finally, simulation results validate the effectiveness and robustness of the proposed ET-TokenCom framework.

eess.IV↗

arXiv2026

Vision-Language-Action Models Meet World Models: Embodied Agentic AI for Low-Altitude Wireless Networks

Low-Altitude Wireless Networks (LAWNs), composed of Unmanned Aerial Vehicles (UAVs) and other aerial platforms, provide integrated perception, communication, and computation services in low-altitude airspace. However, deploying large generative models in this domain faces three major challenges: 1) Limited embodied action mapping; 2) Inadequate physical environment modeling; 3) Insufficient closed-loop optimization. To address these challenges, this study proposes an Embodied Agentic UAV framework. Centered on a Vision-Language-Action (VLA) model as the execution core, the framework establishes an end-to-end embodied decision-making pipeline from multimodal environmental perception to continuous control generation. In addition, a World Model (WM) is introduced to capture the coupling between UAV actions and environmental state evolution, thereby supporting environment prediction, policy verification, and dynamic optimization. Furthermore, memory and reflection mechanisms are incorporated to form an adaptive closed-loop optimization paradigm of decision, execution, evaluation, and update, thereby enhancing the system's autonomous decision-making capability and continual evolution ability in complex dynamic environments. Experimental results validate its effectiveness in enabling robust, predictive, and sustainable autonomous control in LAWNs.

cs.IT↗

arXiv2026

A Hybrid Near-field Indoor Channel Model for THz Bands Based on Surface Scattering Characteristics

Terahertz (THz) communication and extremely large-scale MIMO (XL-MIMO) are essential for achieving ultra-high data rates in future 6G systems. However, at sub-millimeter wavelengths, typical indoor materials exhibit significant roughness that invalidates conventional ideal smooth surface assumptions, while massive array apertures introduce pronounced near-field effects and spatial non-stationarity. To address these challenges, this paper proposes a hybrid near-field channel model utilizing surface scattering characteristics based on distinct measurement campaigns. First, based on typical indoor materials scattering measurements across the 260-400 GHz band, an improved Beckmann-Kirchhoff (B-K) model is developed to accurately characterize surface roughness and diffuse scattering behavior. The model independently analyzes single-bounce (SB) and multi-bounce (MB) clusters by applying deterministic rough surface scattering theory and geometry-statistical approach, respectively. Then, using near-field spatial non-stationarity measurements from a 630-element virtual array in the 330-360 GHz band, a Dual-Gaussian Mixture Model (DMM) and a Negative Binomial (NB) distribution are adopted to describe the lengths and the number of spatial visibility regions (VRs), respectively. Additionally, a Weibull distribution is employed to model the intra-region power fluctuations. Finally, comprehensive XL-MIMO channel evaluations within the same band demonstrate that the proposed model aligns closely with measured results in terms of the spatial cross-correlation function (SCCF), frequency cross-correlation function (FCF), and channel capacity. By reproducing the spatial sparsity of THz band, the proposed model overcomes the limitation of conventional standard models, such as 3GPP 38.901 and WINNER II, in significantly overestimating channel capacity.

eess.SP↗

arXiv2026

RFDT-Channel: RGB-LiDAR-Based RF Digital Twin Scene Construction for 28 GHz Indoor Ray-Tracing Channel Simulation

Real-scene indoor millimeter-wave simulation requires efficient modeling of radio frequency (RF)-computable geometry and electromagnetic material properties. To address the low efficiency of manual scene modeling, the limited RF adaptability of visually reconstructed meshes, and the lack of material binding in 28 GHz ray-tracing simulation, RFDT-Channel is developed as an RF digital twin scene construction workflow based on red-green-blue (RGB) images and light detection and ranging (LiDAR) point clouds. Indoor videos and point clouds are collected by a Jetson Orin platform with LiDAR and GMSL cameras. An initial triangular mesh is generated through COLMAP, 3D Gaussian Splatting, and SuGaR. The LiDAR point cloud then provides geometric and scale references for RF-oriented regularization in Blender, including alignment, wall solidification, door/window opening construction, and topology repair. OpenScene semantic segmentation maps major indoor structures to concrete, glass, wood, and metal materials, and Sionna RT performs 28 GHz ray tracing. Under a fixed transmitter-receiver deployment, the generated channel impulse response (CIR), channel frequency response (CFR), and Radio Map results show that material binding mainly changes weak reflection, transmission, and scattering paths, reducing the number of effective paths from about 742 to about 52 while keeping the dominant path amplitude nearly unchanged.

eess.IV↗

arXiv2026

Beyond the RF Paradigm: Rydberg Atomic Receivers for Next-Generation IoT

Next-generation Internet-of-Things (IoT) is evolving toward a ubiquitous, ultra-low-power, and multi-band heterogeneous networking paradigm that seamlessly integrates terrestrial, non-terrestrial, and ambient devices. This vision places unprecedented demands on conventional radio frequency (RF) receivers, whose fundamental bottlenecks in sensitivity, power consumption, coverage, and multi-band operation are rooted in the RF antenna. To tackle these issues, we show that the quantum properties of Rydberg atomic quantum receivers (RAQRs), including ultra-high sensitivity, broad frequency agility, and diverse reception modalities, provide a physically distinct receiver-side path that replaces the conventional antenna-and-low-noise-amplifier chain. Using LoRa, narrowband IoT, and ambient IoT as case studies, this article shows that RAQRs deliver significant gains in weak-uplink, low-power, and battery-free regimes. A stochastic-geometry analysis in cellular and cell-free architectures then maps these device-level gains onto network coverage, where the RAQR retains roughly a 4 dB half-coverage advantage over the RF receiver in sparse deployments at $λ\sim 10^{-5}~{\mathrm m}^{-2}$, with the gain eroded as device density grows. The open challenges are presented to stand between current RAQR prototypes and deployable IoT infrastructure.

eess.SP↗

arXiv2026

Channel Measurements and Characterization with Phase Drift Compensation for Outdoor 330-360 GHz MIMO Communications

In this paper, an outdoor channel measurement campaign at 330-360 GHz employing a 128 * 4 virtual antenna array (VAA)-based multiple-input multiple-output (MIMO) configuration is conducted. The transmitter (Tx) and receiver (Rx) location pairs are classified into line-of-sight (LoS) and obstructed-LoS (OLoS) scenarios to enable a detailed investigation of outdoor terahertz (THz) band channel characteristics. During the measurement process, the stationarity of the outdoor environment is carefully verified, and a linear phase drift (PD) effect is identified. Then, we propose a PD-aware Space-Alternating Generalized Expectation-Maximization (SAGE) algorithm, which significantly improves both delay resolution and channel parameter estimation accuracy. Based on the processed measurement data, we characterize key channel properties, including the power delay profile, path loss, shadow fading, delay spread, angular spread, Rician K-factor, as well as their cumulative distribution functions and correlation characteristics. In addition, near-field effects and MIMO-specific properties, including the spatial non-stationarity and the cluster birth-death property, are analyzed.

eess.SP↗

arXiv2026

Subspace Fusion Sensing for Cooperative ISAC

This paper proposes a subspace fusion sensing algorithm for cooperative integrated sensing and communication. First, we stack the received signals from access points (APs) into a third-order tensor and construct the equivalent virtual antenna (EVA) array via tensor unfolding. Then, a data association-free subspace-based fusion sensing algorithm is developed utilizing the EVA arrays from distributed APs. A derivation of Cramer-Rao lower bound (CRLB) is also presented. Finally, simulation results validate the effectiveness of the proposed algorithm compared to traditional techniques.

eess.SP↗

arXiv2026

Coverage Analysis of Rydberg Atom Quantum Receiver Arrays: A Stochastic Geometry Approach

Rydberg atomic quantum receivers (RAQRs) offer quantum-limited sensitivity and broadband tunability. It is not obvious whether this device-level advantage also improves network reliability, since in dense deployments, aggregate interference can push the atomic transducer out of its small-signal regime. This paper addresses the question by embedding the RAQR front end into a stochastic geometry (SG) coverage analysis. Starting with the atomic master equation and balanced coherent optical detection, we derive a third-order complex baseband model that retains both the linear gain and the leading cubic nonlinearity. A Bussgang decomposition converts the per-element nonlinear response into an equivalent linear gain plus a distance-dependent distortion noise. Using this equivalent model, we derive the post maximal-ratio combining (MRC) SINR and obtain tractable expressions for the conditional and spatially averaged coverage probabilities. The analytical results show that RAQRs outperform conventional receivers in sparse deployments. However, when the base station (BS) density becomes large, nonlinear distortion reduces this advantage and may make RAQRs perform worse. Simulation results validate the analytical expressions and confirm that the central design tradeoff is between linear gain and cubic nonlinearity.

quant-ph↗

arXiv2026

A Measurement-Based Parameterization of Physics Reflection Models for Terahertz Communication

The accurate modeling of reflection coefficients is pivotal for developing reliable channel models in emerging terahertz (THz) communications. This study establishes a 300$\sim$400 GHz channel measurement platform to measure the reflection coefficients of various materials. Based on the analysis of measured data, we propose the single-layer interference with an extended-parameterized Lorentz/Drude (SLI-EPLD) reflection coefficient model. In this model, a sub-band modeling strategy is adopted to characterize the variation of reflection coefficients with frequency, while a parameterized mapping approach is employed to ensure the stability of model parameters. Furthermore, the weighted sub-band fitting for trend regression (WF-TREND) algorithm is introduced to achieve precise sub-band parameter fitting. Validation results demonstrate superior performance to existing models across multiple materials. The reflection coefficient model established in this work serves as a critical foundation for channel modeling in 300$\sim$400 GHz for high-THz communication.

eess.SP↗

arXiv2026

Channel Estimation for Beyond Diagonal RIS-Aided Multi-User mmWave Systems

Beyond diagonal reconfigurable intelligent surface (BD-RIS) represents a promising architecture for advancing millimeter-wave (mmWave) communications. However, its intricate inter-element connections invalidate the conventional decoupled mathematical structure, thereby severely complicating cascaded channel estimation. In this paper, we formulate a novel block-Kronecker-structured cascaded channel model for a \textit{group-connected} BD-RIS-aided multi-user (MU) mmWave system equipped with uniform planar arrays (UPAs). By exploiting the cascaded channel sparsity, an efficient three-stage estimation protocol is proposed. Specifically, Stage I acquires the common angles of arrival (AoAs) at the base station (BS) via a discrete Fourier transform (DFT)-based approach. Stage II leverages the block-Kronecker structure alongside orthogonal matching pursuit (OMP) and correlation-based least squares (LS) to extract the complete cascaded channel for a designated typical user. Finally, Stage III utilizes a Hierarchical Block OMP (HBOMP) algorithm to estimate the other users' channels. This structurally reconstructs the common and user-specific components, which fundamentally reduces the computational complexity and substantially reduces the pilot overhead. Numerical simulations verify that the proposed protocol yields improved channel estimation accuracy while maintaining a relatively low pilot overhead.

eess.SP↗

arXiv2026

CAT-MoEformer: Context-Aware Temporal MoE Transformer for Beam Prediction

This paper proposes CAT-MoEformer, a context-aware transformer with scene-conditioned mixture-of-experts (MoE) feed-forward networks, for proactive mmWave beam prediction from compressed uplink pilot observations. The spatial encoder comprises a three-layer asymmetric convolutional network followed by a squeeze-and-excitation recalibration block, which extracts frequency-beam correlation features from pilot tensors without explicit channel reconstruction. A truncated pretrained GPT-2 backbone models the temporal evolution of beam sequences, with the feed-forward networks in the upper three transformer layers replaced by scene-conditioned MoE-FFN modules. A lightweight gating network maps the scenario label and normalized user equipment speed to expert mixing weights, conditioning the routing decision on physical propagation descriptors rather than on latent hidden states. This design yields interpretable expert assignments and eliminates the load imbalance associated with token-level routing. To prevent expert collapse under soft routing, a three-stage training strategy is introduced: hard expert assignment in the first stage establishes scene-specific specialization, isolated gating network training in the second stage aligns the soft routing distribution with the hard partition, and top-1 hard inference in the third stage fine-tunes the model under deterministic single-expert activation to maximize scene-specific precision. Simulation results on 3GPP TR 38.901 Urban Macro channel simulations with $64{,}000$ user samples demonstrate that CAT-MoEformer achieves a Top-1 beam prediction accuracy of $94.88\%$ and a beam switching instant accuracy of $80.62\%$, representing gains of $2.33\%$ and $9.55\%$ respectively over a CNN+GPT-2 baseline, with an inference latency of $0.52$~ms.

eess.SP↗

arXiv2026

Signal-Dependent Shot Noise Modeling of Rydberg Atomic Quantum Receivers: A Design Perspective

In this paper, we develop a communication-oriented complex baseband equivalent model for superheterodyne Rydberg atomic quantum receivers (RAQRs). The model explicitly captures photodetection-induced signal-dependent shot noise and its coupling with the optical operating point. By leveraging an atomic superheterodyne architecture and a strong local oscillator, we construct a complex baseband representation for both the received signal and the signal-dependent shot noise under both direct incoherent optical detection and balanced coherent optical detection. The derived model reveals that the optical operating point jointly determines the normalized effective receive gain and the equivalent noise background, thereby establishing a traceable gain-noise tradeoff governed by system design. More importantly, the proposed model shows that neglecting signal-dependent shot noise may lead to inaccurate operating-point design. Finally, by extending to the multiple-input-multiple-output (MIMO) case, we derive a lower bound on the achievable rate while considering the signal-dependent shot noise. Our analysis \textcolor{black}{reveals} that the non-zero asymptotic rate of RAQ-MIMO and its superiority over conventional RF-MIMO hinge on the normalized noise floor of the RAQ receive chain falling below that of RF MIMO. Simulation results validate our analysis and yield practical, closed-form design guidelines for RAQR front ends, revealing parameter regimes in which RAQ-MIMO outperforms conventional MIMO systems.

eess.SP↗

arXiv2026

Near-field Channel Estimation for XL-RIS-aided mmWave MIMO Systems

Extremely large-scale reconfigurable intelligent surfaces (XL-RISs) have emerged as a promising technology for millimeter-wave (mmWave) communications. However, the exceedingly large aperture of XL-RISs renders the RIS-user links likely to operate in the near-field region, where the conventional planar-wave assumption and angular-domain sparse representation become invalid, thus making channel estimation significantly more challenging. In this paper, we investigate cascaded channel estimation for an XL-RIS-aided multi-user multiple-input multiple-output (MU-MIMO) system, in which the BS-RIS channel is modeled in the far field, while the RIS-user channels exhibit near-field spherical-wave characteristics. To tackle the resulting hybrid-field estimation problem, we propose a low-overhead two-stage channel estimation scheme by jointly exploiting the common BS-RIS link shared by all users and the polar-domain sparsity of the RIS-user channels. Specifically, the multi-antenna users are firstly decomposed into multiple virtual single-antenna users, based on which the common BS-RIS parameters are extracted from a typical virtual user and the RIS-user channels are initialized via compensated polar-domain sparse recovery. Then, an alternating least-squares refinement procedure is developed to jointly improve the common BS-RIS operator and the user-specific RIS-side channels. Simulation results show that the proposed scheme achieves competitive channel estimation performance with substantially reduced pilot overhead compared with the existing near-field benchmarks.

cs.IT↗