arXiv subjects

Cunhua Pan

Publications and source records attributed to Cunhua Pan.

At least 37 records · Page 2Linked to original sources

arXiv2026

Vision-Language-Action Models Meet World Models: Embodied Agentic AI for Low-Altitude Wireless Networks

Low-Altitude Wireless Networks (LAWNs), composed of Unmanned Aerial Vehicles (UAVs) and other aerial platforms, provide integrated perception, communication, and computation services in low-altitude airspace. However, deploying large generative models in this domain faces three major challenges: 1) Limited embodied action mapping; 2) Inadequate physical environment modeling; 3) Insufficient closed-loop optimization. To address these challenges, this study proposes an Embodied Agentic UAV framework. Centered on a Vision-Language-Action (VLA) model as the execution core, the framework establishes an end-to-end embodied decision-making pipeline from multimodal environmental perception to continuous control generation. In addition, a World Model (WM) is introduced to capture the coupling between UAV actions and environmental state evolution, thereby supporting environment prediction, policy verification, and dynamic optimization. Furthermore, memory and reflection mechanisms are incorporated to form an adaptive closed-loop optimization paradigm of decision, execution, evaluation, and update, thereby enhancing the system's autonomous decision-making capability and continual evolution ability in complex dynamic environments. Experimental results validate its effectiveness in enabling robust, predictive, and sustainable autonomous control in LAWNs.

cs.IT↗

arXiv2026

A Hybrid Near-field Indoor Channel Model for THz Bands Based on Surface Scattering Characteristics

Terahertz (THz) communication and extremely large-scale MIMO (XL-MIMO) are essential for achieving ultra-high data rates in future 6G systems. However, at sub-millimeter wavelengths, typical indoor materials exhibit significant roughness that invalidates conventional ideal smooth surface assumptions, while massive array apertures introduce pronounced near-field effects and spatial non-stationarity. To address these challenges, this paper proposes a hybrid near-field channel model utilizing surface scattering characteristics based on distinct measurement campaigns. First, based on typical indoor materials scattering measurements across the 260-400 GHz band, an improved Beckmann-Kirchhoff (B-K) model is developed to accurately characterize surface roughness and diffuse scattering behavior. The model independently analyzes single-bounce (SB) and multi-bounce (MB) clusters by applying deterministic rough surface scattering theory and geometry-statistical approach, respectively. Then, using near-field spatial non-stationarity measurements from a 630-element virtual array in the 330-360 GHz band, a Dual-Gaussian Mixture Model (DMM) and a Negative Binomial (NB) distribution are adopted to describe the lengths and the number of spatial visibility regions (VRs), respectively. Additionally, a Weibull distribution is employed to model the intra-region power fluctuations. Finally, comprehensive XL-MIMO channel evaluations within the same band demonstrate that the proposed model aligns closely with measured results in terms of the spatial cross-correlation function (SCCF), frequency cross-correlation function (FCF), and channel capacity. By reproducing the spatial sparsity of THz band, the proposed model overcomes the limitation of conventional standard models, such as 3GPP 38.901 and WINNER II, in significantly overestimating channel capacity.

eess.SP↗

arXiv2026

RFDT-Channel: RGB-LiDAR-Based RF Digital Twin Scene Construction for 28 GHz Indoor Ray-Tracing Channel Simulation

Real-scene indoor millimeter-wave simulation requires efficient modeling of radio frequency (RF)-computable geometry and electromagnetic material properties. To address the low efficiency of manual scene modeling, the limited RF adaptability of visually reconstructed meshes, and the lack of material binding in 28 GHz ray-tracing simulation, RFDT-Channel is developed as an RF digital twin scene construction workflow based on red-green-blue (RGB) images and light detection and ranging (LiDAR) point clouds. Indoor videos and point clouds are collected by a Jetson Orin platform with LiDAR and GMSL cameras. An initial triangular mesh is generated through COLMAP, 3D Gaussian Splatting, and SuGaR. The LiDAR point cloud then provides geometric and scale references for RF-oriented regularization in Blender, including alignment, wall solidification, door/window opening construction, and topology repair. OpenScene semantic segmentation maps major indoor structures to concrete, glass, wood, and metal materials, and Sionna RT performs 28 GHz ray tracing. Under a fixed transmitter-receiver deployment, the generated channel impulse response (CIR), channel frequency response (CFR), and Radio Map results show that material binding mainly changes weak reflection, transmission, and scattering paths, reducing the number of effective paths from about 742 to about 52 while keeping the dominant path amplitude nearly unchanged.

eess.IV↗

arXiv2026

Beyond the RF Paradigm: Rydberg Atomic Receivers for Next-Generation IoT

Next-generation Internet-of-Things (IoT) is evolving toward a ubiquitous, ultra-low-power, and multi-band heterogeneous networking paradigm that seamlessly integrates terrestrial, non-terrestrial, and ambient devices. This vision places unprecedented demands on conventional radio frequency (RF) receivers, whose fundamental bottlenecks in sensitivity, power consumption, coverage, and multi-band operation are rooted in the RF antenna. To tackle these issues, we show that the quantum properties of Rydberg atomic quantum receivers (RAQRs), including ultra-high sensitivity, broad frequency agility, and diverse reception modalities, provide a physically distinct receiver-side path that replaces the conventional antenna-and-low-noise-amplifier chain. Using LoRa, narrowband IoT, and ambient IoT as case studies, this article shows that RAQRs deliver significant gains in weak-uplink, low-power, and battery-free regimes. A stochastic-geometry analysis in cellular and cell-free architectures then maps these device-level gains onto network coverage, where the RAQR retains roughly a 4 dB half-coverage advantage over the RF receiver in sparse deployments at $λ\sim 10^{-5}~{\mathrm m}^{-2}$, with the gain eroded as device density grows. The open challenges are presented to stand between current RAQR prototypes and deployable IoT infrastructure.

eess.SP↗

arXiv2026

Subspace Fusion Sensing for Cooperative ISAC

This paper proposes a subspace fusion sensing algorithm for cooperative integrated sensing and communication. First, we stack the received signals from access points (APs) into a third-order tensor and construct the equivalent virtual antenna (EVA) array via tensor unfolding. Then, a data association-free subspace-based fusion sensing algorithm is developed utilizing the EVA arrays from distributed APs. A derivation of Cramer-Rao lower bound (CRLB) is also presented. Finally, simulation results validate the effectiveness of the proposed algorithm compared to traditional techniques.

eess.SP↗

arXiv2026

Coverage Analysis of Rydberg Atom Quantum Receiver Arrays: A Stochastic Geometry Approach

Rydberg atomic quantum receivers (RAQRs) offer quantum-limited sensitivity and broadband tunability. It is not obvious whether this device-level advantage also improves network reliability, since in dense deployments, aggregate interference can push the atomic transducer out of its small-signal regime. This paper addresses the question by embedding the RAQR front end into a stochastic geometry (SG) coverage analysis. Starting with the atomic master equation and balanced coherent optical detection, we derive a third-order complex baseband model that retains both the linear gain and the leading cubic nonlinearity. A Bussgang decomposition converts the per-element nonlinear response into an equivalent linear gain plus a distance-dependent distortion noise. Using this equivalent model, we derive the post maximal-ratio combining (MRC) SINR and obtain tractable expressions for the conditional and spatially averaged coverage probabilities. The analytical results show that RAQRs outperform conventional receivers in sparse deployments. However, when the base station (BS) density becomes large, nonlinear distortion reduces this advantage and may make RAQRs perform worse. Simulation results validate the analytical expressions and confirm that the central design tradeoff is between linear gain and cubic nonlinearity.

quant-ph↗

arXiv2026

A Measurement-Based Parameterization of Physics Reflection Models for Terahertz Communication

The accurate modeling of reflection coefficients is pivotal for developing reliable channel models in emerging terahertz (THz) communications. This study establishes a 300$\sim$400 GHz channel measurement platform to measure the reflection coefficients of various materials. Based on the analysis of measured data, we propose the single-layer interference with an extended-parameterized Lorentz/Drude (SLI-EPLD) reflection coefficient model. In this model, a sub-band modeling strategy is adopted to characterize the variation of reflection coefficients with frequency, while a parameterized mapping approach is employed to ensure the stability of model parameters. Furthermore, the weighted sub-band fitting for trend regression (WF-TREND) algorithm is introduced to achieve precise sub-band parameter fitting. Validation results demonstrate superior performance to existing models across multiple materials. The reflection coefficient model established in this work serves as a critical foundation for channel modeling in 300$\sim$400 GHz for high-THz communication.

eess.SP↗

arXiv2026

Channel Estimation for Beyond Diagonal RIS-Aided Multi-User mmWave Systems

Beyond diagonal reconfigurable intelligent surface (BD-RIS) represents a promising architecture for advancing millimeter-wave (mmWave) communications. However, its intricate inter-element connections invalidate the conventional decoupled mathematical structure, thereby severely complicating cascaded channel estimation. In this paper, we formulate a novel block-Kronecker-structured cascaded channel model for a \textit{group-connected} BD-RIS-aided multi-user (MU) mmWave system equipped with uniform planar arrays (UPAs). By exploiting the cascaded channel sparsity, an efficient three-stage estimation protocol is proposed. Specifically, Stage I acquires the common angles of arrival (AoAs) at the base station (BS) via a discrete Fourier transform (DFT)-based approach. Stage II leverages the block-Kronecker structure alongside orthogonal matching pursuit (OMP) and correlation-based least squares (LS) to extract the complete cascaded channel for a designated typical user. Finally, Stage III utilizes a Hierarchical Block OMP (HBOMP) algorithm to estimate the other users' channels. This structurally reconstructs the common and user-specific components, which fundamentally reduces the computational complexity and substantially reduces the pilot overhead. Numerical simulations verify that the proposed protocol yields improved channel estimation accuracy while maintaining a relatively low pilot overhead.

eess.SP↗

arXiv2026

CAT-MoEformer: Context-Aware Temporal MoE Transformer for Beam Prediction

This paper proposes CAT-MoEformer, a context-aware transformer with scene-conditioned mixture-of-experts (MoE) feed-forward networks, for proactive mmWave beam prediction from compressed uplink pilot observations. The spatial encoder comprises a three-layer asymmetric convolutional network followed by a squeeze-and-excitation recalibration block, which extracts frequency-beam correlation features from pilot tensors without explicit channel reconstruction. A truncated pretrained GPT-2 backbone models the temporal evolution of beam sequences, with the feed-forward networks in the upper three transformer layers replaced by scene-conditioned MoE-FFN modules. A lightweight gating network maps the scenario label and normalized user equipment speed to expert mixing weights, conditioning the routing decision on physical propagation descriptors rather than on latent hidden states. This design yields interpretable expert assignments and eliminates the load imbalance associated with token-level routing. To prevent expert collapse under soft routing, a three-stage training strategy is introduced: hard expert assignment in the first stage establishes scene-specific specialization, isolated gating network training in the second stage aligns the soft routing distribution with the hard partition, and top-1 hard inference in the third stage fine-tunes the model under deterministic single-expert activation to maximize scene-specific precision. Simulation results on 3GPP TR 38.901 Urban Macro channel simulations with $64{,}000$ user samples demonstrate that CAT-MoEformer achieves a Top-1 beam prediction accuracy of $94.88\%$ and a beam switching instant accuracy of $80.62\%$, representing gains of $2.33\%$ and $9.55\%$ respectively over a CNN+GPT-2 baseline, with an inference latency of $0.52$~ms.

eess.SP↗

arXiv2026

Signal-Dependent Shot Noise Modeling of Rydberg Atomic Quantum Receivers: A Design Perspective

In this paper, we develop a communication-oriented complex baseband equivalent model for superheterodyne Rydberg atomic quantum receivers (RAQRs). The model explicitly captures photodetection-induced signal-dependent shot noise and its coupling with the optical operating point. By leveraging an atomic superheterodyne architecture and a strong local oscillator, we construct a complex baseband representation for both the received signal and the signal-dependent shot noise under both direct incoherent optical detection and balanced coherent optical detection. The derived model reveals that the optical operating point jointly determines the normalized effective receive gain and the equivalent noise background, thereby establishing a traceable gain-noise tradeoff governed by system design. More importantly, the proposed model shows that neglecting signal-dependent shot noise may lead to inaccurate operating-point design. Finally, by extending to the multiple-input-multiple-output (MIMO) case, we derive a lower bound on the achievable rate while considering the signal-dependent shot noise. Our analysis \textcolor{black}{reveals} that the non-zero asymptotic rate of RAQ-MIMO and its superiority over conventional RF-MIMO hinge on the normalized noise floor of the RAQ receive chain falling below that of RF MIMO. Simulation results validate our analysis and yield practical, closed-form design guidelines for RAQR front ends, revealing parameter regimes in which RAQ-MIMO outperforms conventional MIMO systems.

eess.SP↗

arXiv2026

Near-field Channel Estimation for XL-RIS-aided mmWave MIMO Systems

Extremely large-scale reconfigurable intelligent surfaces (XL-RISs) have emerged as a promising technology for millimeter-wave (mmWave) communications. However, the exceedingly large aperture of XL-RISs renders the RIS-user links likely to operate in the near-field region, where the conventional planar-wave assumption and angular-domain sparse representation become invalid, thus making channel estimation significantly more challenging. In this paper, we investigate cascaded channel estimation for an XL-RIS-aided multi-user multiple-input multiple-output (MU-MIMO) system, in which the BS-RIS channel is modeled in the far field, while the RIS-user channels exhibit near-field spherical-wave characteristics. To tackle the resulting hybrid-field estimation problem, we propose a low-overhead two-stage channel estimation scheme by jointly exploiting the common BS-RIS link shared by all users and the polar-domain sparsity of the RIS-user channels. Specifically, the multi-antenna users are firstly decomposed into multiple virtual single-antenna users, based on which the common BS-RIS parameters are extracted from a typical virtual user and the RIS-user channels are initialized via compensated polar-domain sparse recovery. Then, an alternating least-squares refinement procedure is developed to jointly improve the common BS-RIS operator and the user-specific RIS-side channels. Simulation results show that the proposed scheme achieves competitive channel estimation performance with substantially reduced pilot overhead compared with the existing near-field benchmarks.

cs.IT↗

arXiv2026

Cooperative ISAC for LAE: Joint Trajectory Planning, Power allocation, and Dynamic Time Division

To enhance the performance of aerial-ground networks, this paper proposes an integrated sensing and communication (ISAC) framework for multi-UAV systems. In our model, ground base stations (BSs) cooperatively serve multiple unmanned aerial vehicles (UAVs), employing a dynamic time-division strategy where beam scanning for sensing precedes data communication in each time slot. To maximize the sum communication rate while satisfying a mission-level cumulative radar mutual information (MI) requirement, we jointly optimize the UAV trajectories, communication and sensing power allocation, and the time-division ratio. The resulting highly coupled non-convex optimization problem is efficiently solved using an alternating optimization (AO) and successive convex approximation (SCA) framework, which yields a non-decreasing objective sequence and convergence to a finite objective value under the adopted surrogate-based iterative procedure. Extensive simulation results demonstrate that our proposed joint design significantly outperforms benchmark schemes with static trajectories, partially optimized resources, or non-cooperative single-BS transmission. Furthermore, a comprehensive sensitivity analysis reveals the distinct mechanisms by which sensing thresholds and the number of UAVs influence resource allocation and spatial organization, highlighting the critical importance of dynamic, multi-dimensional resource management for effectively navigating the sensing-communication trade-off in low-altitude economies.

eess.SY↗

arXiv2026

CRS-LLM: Cooperative Beam Prediction with a GPT-Style Backbone and Switch-Gated Fusion

Millimeter-wave (mmWave) communication depends on highly directional beamforming, while fast mobility, blockage, and rapid geometry changes in vehicle-to-everything (V2X) scenarios make beam tracking challenging. In cooperative multi-base-station (BS) systems, conventional hierarchical methods usually separate BS selection and beam selection, which may cause error propagation when beam states change abruptly. To address this issue, this paper proposes Cooperative Radio Sensing with Large Language Models (CRS-LLM), a cooperative beam prediction framework for next-step joint BS-beam prediction. CRS-LLM formulates beam tracking as a single classification problem over the joint BS-beam space, avoiding cascaded decision errors. To adapt channel state information (CSI) to large language models, a dual-view CSI tokenizer extracts frequency-domain and delay-domain channel features through a lightweight CNN front-end and temporal tokenization module. A truncated GPT-style backbone is then used for temporal modeling with parameter-efficient adaptation. In addition, a transition-aware switch-gated predictor combines a stable branch, a residual flip branch, and a low-rank transition prior to capture both smooth evolution and abrupt changes. Simulation results show that CRS-LLM outperforms CSI-Transformer, Hierarchical BS-Beam, and representative CNN- and recurrent-neural-network baselines in Top-1 accuracy and normalized beam gain under different SNR conditions, while also showing strong few-shot performance and promising zero-shot transferability.

eess.SP↗

arXiv2026

A Framework for Uplink ISAC Receiver Designs: Performance Analysis and Algorithm Development

Uplink integrated sensing and communication (ISAC) systems have recently emerged as a promising research direction, enabling simultaneous uplink signal detection and target sensing. {In this paper, we propose the flexible projection (FP)-type receiver that unifies the projection-type receiver and the successive interference cancellation (SIC)-type receiver by using a flexible tradeoff factor to adapt to dynamically changing uplink ISAC scenarios.} The FP-type receiver addresses the joint signal detection and target response estimation problem through two coordinated phases: 1) Communication signal detection using a reconstructed signal whose composition is controlled by the tradeoff factor, followed by 2) Target response estimation performed through subtraction of the detected communication signal from the received signal. With adjustable tradeoff factors, the FP-type receiver can balance the enhancement of the signal-to-interference-plus-noise ratio (SINR) with the reduction of correlation in the reconstructed signal for communication signal detection. The pairwise error probability (PEP) expressions are analyzed for both the maximum likelihood (ML) and the zero-forcing (ZF) detectors, revealing that the optimal tradeoff factor should be determined based on the adopted detection algorithm and the relative power of the sensing and communication (S\&C) signals. A homotopy optimization framework is first applied for the FP-type receiver with a fixed tradeoff factor. This framework is then extended to develop the dynamic flexible projection (DFP)-type receiver, which iteratively adjusts the tradeoff factor for improved algorithm performance and environmental adaptability. Finally, we show that the length of the jointly processed signal should scale with the antenna size to fully unleash the potential of the uplink ISAC receiver.

cs.IT↗

arXiv2026

Robust Cross-Domain WiFi Fall Detection via Physics-Driven Attention-Enhanced Transformers

Device-free fall detection utilizing WiFi Channel State Information (CSI) has emerged as a promising, privacy-preserving solution for elderly health monitoring in the Internet of Things (IoT) era. However, existing deep learning approaches suffer from severe performance degradation when deployed in unseen environments due to static background overfitting and Non-Line-of-Sight (NLoS) signal attenuation. To address these critical bottlenecks, we propose a robust, domain-generalizable framework featuring a novel Attention-Enhanced CNN-Transformer hybrid architecture. First, we design a physics-driven \textbf{Dynamic Variance Gate (DVG)} to dynamically calculate local temporal variance, acting as a soft-attention mask that eliminates static environmental DC components while amplifying dynamic human motion. Second, we introduce a Physics-Aware Data Augmentation strategy to force the network to learn invariant morphological signatures rather than environment-specific noise. Furthermore, a Convolutional Block Attention Module (CBAM) is integrated to refine spatiotemporal features prior to Transformer-based sequence modeling. Extensive cross-domain evaluations across four distinct indoor environments demonstrate that our method achieves 97.6\% accuracy in NLoS scenarios and 98.8\% in completely unseen environments without target-domain fine-tuning. Finally, we deploy the proposed framework on an edge computing system equipped with commercial WiFi NICs. Real-world live inference field tests confirm the system's robustness against unseen environmental layouts and its capability for continuous, low-latency whole-home safety monitoring.

eess.SP↗

arXiv2026

Ground Reflection-Aided TomoSAR Imaging with 5G NR Signals

Tomographic synthetic aperture radar (TomoSAR) enables three-dimensional imaging by resolving targets along the elevation dimension, which is essential for environment reconstruction and infrastructure monitoring. A critical challenge in TomoSAR is the severe multipath propagation that causes ghost targets, range offsets, and elevation ambiguities. To address this, this paper proposes an enhanced Newtonized orthogonal matching pursuit (NOMP) algorithm to extract the delay, Doppler, and complex amplitude parameters of each propagation path, effectively separating line-of-sight (LoS) and multipath components prior to TomoSAR processing. Additionally, a height fusion strategy combining TomoSAR estimates with LoS-ground reflection delay-based inversion improves elevation accuracy. Simulation results demonstrate that the proposed method achieves improved positioning and elevation accuracy while effectively suppressing multipath-induced artifacts.

eess.SP↗

arXiv2026

Spherical Antenna Arrays for Future Communications: Principles, Applications, and Research Directions

With the development of 6G technologies, traditional uniform linear arrays (ULAs) and uniform planar arrays (UPAs) can hardly meet the demands of three-dimensional (3D) full-space coverage and high angular resolution. Spherical antenna arrays (SAAs), with elements uniformly distributed on a spherical surface, provide an effective solution. This article analyzes the issues of traditional arrays, summarizes the advantages and typical structures of SAAs, discusses their potential application scenarios, and verifies their superiority over UPAs via a case study. Finally, key technical challenges and corresponding research directions of SAAs are identified, providing a reference for their research and application in future wireless communications.

eess.SP↗

arXiv2026

A BEV-Fusion Based Framework for Sequential Multi-Modal Beam Prediction in mmWave Systems

Beam prediction is critical for reducing beam-training overhead in millimeter-wave (mmWave) systems, especially in high-mobility vehicular scenarios. This paper presents a BEV-Fusion based framework that unifies camera, LiDAR, radar, and GPS modalities in a shared bird's-eye-view (BEV) representation for spatially consistent multi-modal fusion. Unlike priorapproaches that fuse globally pooled one-dimensional features, the proposed method performs fusion in BEV space to preservecross-modal geometric structure and visual semantic density. A learned camera-to-BEV module based on cross-attention is adopted to generate BEV-aligned visual features without relying on precise camera calibration, and a temporal transformer is used to aggregate five-step sequential observations for motion-aware beam prediction. Experiments on the DeepSense 6G benchmark show that BEV-Fusion achieves approximately 87% distance- based accuracy (DBA) on scenarios 32, 33 and 34, outperforming the TransFuser baseline. These results indicate that BEV-space fusion provides an effective spatial abstraction for sensing-assisted beam prediction.

eess.SP↗