arXiv subjects

D. D. Fan

Publications and source records attributed to D. D. Fan.

At least 19 recordsLinked to original sources

arXiv2020

Strong interlayer coupling in two-dimensional PbSe with high thermoelectric performance

It was generally assumed that weak van der Waals interactions exist between neighboring layers in the two-dimensional group-IV chalcogenides. Using PbSe as a prototypal example, however, we find additional strong coupling between the Pb-Pb layers, as evidenced by detailed analysis of the differential charge density. The coupling resembles covalent-like bond and exhibits strong harmonicity around the equilibrium distance, which can be fine tuned to obviously reduce the phonon thermal conductivity but slightly change the electronic transport of PbSe. As a consequence, a maximum ZT value of 2.5 can be realized at 900 K for the p-type system. Our work offers an effective and feasible design strategy to enhance the thermoelectric performance of similar layered structures.

cond-mat.mtrl-sci↗

arXiv2019

High figure-of-merit in the heavy-fermion UN2 system for radioisotope thermoelectric applications

The design of uranium-based thermoelectric materials presents a novel and intriguing strategy for directly converting nuclear heat into electrical power. Using high-level first-principles approach combined with accurate solution of Boltzmann transport equation, we demonstrate that a giant n-type power factor of 13.8 mW/mK^2 and a peak ZT value of 2.2 can be realized in the heavy-fermion UN2 compound at 700 K. Such promising thermoelectric performance arises from the large degeneracy (Nv=14) of heavy conduction band coupled with weak electron-phonon interactions, which is in principle governed by the strong Coulomb correlation among the partially filled U-5f electrons in the face-centered cubic structure. Collectively, our theoretical work suggests that the energetic UN2 is an excellent alternative to efficient radioisotope power conversion, which also uncovers an underexplored area for thermoelectric research.

cond-mat.mtrl-sci↗

arXiv2019

A comparative study of the thermoelectric performance of graphene-like BX (X= P, As, Sb) monolayers

The electronic and phonon transport properties of graphene-like boron phosphide (BP), boron arsenide (BAs), and boron antimonide (BSb) monolayers are investigated using first-principles calculations and Boltzmann theory. By considering both the phonon-phonon and electron-phonon scatterings, we demonstrate that the strong bond anharmonicity in the BAs and BSb monolayers can dramatically suppress the phonon relaxation time but hardly affects that of electrons. As a consequence, both systems exhibit comparable power factors with that of the BP monolayer but much lower lattice thermal conductivities. Accordingly, a maximum ZT values above 3.0 can be achieved in both BAs and BSb monolayers at optimized carrier concentrations. Interestingly, very similar p- and n-type thermoelectric performance is observed in the BSb monolayer along the armchair direction, which is of vital importance in the fabrication of thermoelectric modules with comparable efficiencies.

cond-mat.mtrl-sci↗

arXiv2018

High thermoelectric performance in the hexagonal bilayer structure consisting of light boron and phosphorus elements

Two-dimensional layered materials have attracted tremendous attentions due to their extraordinary physical and chemical properties. Using first-principles calculations and Boltzmann transport theory, we give an accurate prediction of the thermoelectric properties of boron phosphide (BP) bilayer, where the carrier relaxation time is treated within the framework of electron-phonon coupling. It is found that the lattice thermal conductivity of BP bilayer is much lower than that of its monolayer structure, which can be attributed to the presence of van der Waals interactions. On the other hand, the graphene-like BP bilayer shows very high carrier mobility with a moderate band gap of 0.88 eV. As a consequence, a maximum p-type ZT value of ~1.8 can be realized along the x-direction at 1200 K, which is amazingly high for systems consisting of light elements only. Moreover, we obtain almost identical p- and n-type ZT of ~1.6 along the y-direction, which is very desirable for fabrication of thermoelectric modules with comparative efficiencies. Collectively, these findings demonstrate great advantages of the layered structures containing earth-abundant elements for environment-friendly thermoelectric applications.

cond-mat.mes-hall↗

arXiv2018

High thermoelectric performance originating from the grooved bands in the ZrSe3 monolayer

Low-dimensional layered materials have attracted tremendous attentions due to their wide range of physical and chemical properties and potential applications in electronic devices. Using first-principles method taking into account the quasiparticle self-energy correction and Boltzmann transport theory, the electronic transport properties of ZrSe3 monolayer are investigated, where the carrier relaxation time is accurately calculated within the framework of electron-phonon coupling. It is demonstrated that the high power factor of the monolayer can be attributed to the grooved bands near the conduction band minimum. Combined with the low lattice thermal conductivity obtained by solving the phonon Boltzmann transport equation, a considerable n-type ZT value of ~2.4 can be achieved at 800 K in the ZrSe3 monolayer.

cond-mat.mtrl-sci↗

arXiv2018

First-principles study of the thermoelectric properties of quaternary tetradymite BiSbSeTe2

The electronic and phonon transport properties of quaternary tetradymite BiSbSeTe2 are investigated using first-principles approach and Boltzmann transport theory. Unlike the binary counterpart Bi2Te3, we obtain a pair of Rashba splitting bands induced by the absence of inversion center. Such unique characteristic could lead to a large Seebeck coefficient even at relatively higher carrier concentration. Besides, we find an ultralow lattice thermal conductivity of BiSbSeTe2, especially along the interlayer direction, which can be traced to the extremely small phonon relaxation time mainly induced by the mixed covalent bonds. As a consequence, a considerably large ZT value of ~2.0 can be obtained at 500 K, indicating that the unique lattice structure of BiSbSeTe2 caused by isoelectronic substitution could be an advantage to achieving high thermoelectric performance.

cond-mat.mtrl-sci↗

arXiv2017

First-principles study of the effects of electron-phonon coupling on the thermoelectric properties: a case study of SiGe compound

It is generally assumed in the thermoelectric community that the lattice thermal conductivity of a given material is independent of the electronic properties. This perspective is however questionable since the electron-phonon coupling could have certain effects on both the carrier and phonon transport, which in turn will affect the thermoelectric properties. Using SiGe compound as a prototypical example, we give an accurate prediction of the carrier relaxation time by considering scattering from all the phonon modes, as opposed to the simple deformation potential theory. It is found that the carrier relaxation time does not change much with the concentration, which is however not the case for the phonon transport where the lattice thermal conductivity can be significantly reduced by electron-phonon coupling at higher carrier concentration. As a consequence, the figure-of-merit of SiGe compound is obviously enhanced at optimized carrier concentration, and becomes more pronounced at elevated temperature.

cond-mat.mtrl-sci↗

arXiv2017

First-principles study of the thermoelectric properties of Zintl compound KSnSb

The unique structure of Zintl phase makes it an ideal system to realize the concept of phonon-glass and electron-crystal in the thermoelectric community. In this work, by combining first-principles calculations and Boltzmann transport theory for both electrons and phonons, we demonstrate that the ZT value of Zintl compound KSnSb can reach ~2.6 at 800 K. Such extraordinary thermoelectric performance originates from the large Seebeck coefficient due to multi-valley band structures and particularly very small lattice thermal conductivity caused by mixed-bond characteristics.

cond-mat.mtrl-sci↗

arXiv2016

Effects of topological edge states on the thermoelectric properties of Bi nanoribbons

Using first-principles calculations combined with Boltzmann transport theory, we investigate the effects of topological edge states on the thermoelectric properties of Bi nanoribbons. It is found that there is a competition between the edge and bulk contributions to the Seebeck coefficients. However, the electronic transport of the system is dominated by the edge states because of its much larger electrical conductivity. As a consequence, a room temperature value exceeding 3.0 could be achieved for both p- and n-type systems when the relaxation time ratio between the edge and the bulk states is tuned to be 1000. Our theoretical study suggests that the utilization of topological edge states might be a promising approach to cross the threshold of the industrial application of thermoelectricity.

cond-mat.mtrl-sci↗

arXiv2016

Thermoelectric properties of graphyne from first-principles calculations

The two-dimensional graphene-like carbon allotrope, graphyne, has been recently fabricated and exhibits many interesting electronic properties. In this work, we investigate the thermoelectric properties of γ-graphyne by performing first-principles calculations combined with Boltzmann transport theory for both electron and phonon. The carrier relaxation time is accurately evaluated from the ultra-dense electron-phonon coupling matrix elements calculated by adopting the density functional perturbation theory and Wannier interpolation, rather than the generally used deformation potential theory which only considers the electron-acoustic phonon scattering. It is found that the thermoelectric performance of γ-graphyne exhibits a strong dependence on the temperature and carrier type. At an intermediate temperature of 600 K, a maximum ZT value of 1.5 and 1.0 can be achieved for the p- and n-type systems, respectively.

cond-mat.mes-hall↗

arXiv2016

Understanding the electronic and phonon transport properties of thermoelectric material BiCuSeO: a first-principles study

Using first-principles pseudopotential method and Boltzmann transport theory, we give a comprehensive understanding of the electronic and phonon transport properties of thermoelectric material BiCuSeO. By choosing proper hybrid functional for the exchange-correlation energy, we find that the system is semiconducting with a direct band gap of ~0.8 eV, which is quite different from those obtained previously using standard functionals. Detailed analysis of a three-dimensional energy band structure indicates that there is a valley degeneracy of eight around the valence band maximum, which leads to a sharp density of states and is responsible for a large p-type Seebeck coefficient. Moreover, we find that the density of states effective masses are much larger and results in very low hole mobility of BiCuSeO. On the other hand, we find larger atomic displacement parameters for the Cu atoms, which indicates that the stronger anharmonicity of BiCuSeO may originate from the rattling behavior of Cu instead of previously believed Bi atoms.

cond-mat.mtrl-sci↗

arXiv2016

The rhombohedral Sb2Se3 is also an intrinsic topological insulator

Topological insulators are new class of quantum materials, which have insulating energy gaps in bulk, but exhibit gapless edge states or surface states that are protected by time-reversal symmetry at boundary. It was theoretically predicted and experimentally confirmed that the binary tetradymites Bi2Te3, Bi2Se3, and Sb2Te3 are three-dimensional topological insulators. In this work, we demonstrate by first-principles approach that the ignored Sb2Se3, although with relatively smaller spin-orbital coupling strength, can also exhibit topologically protected surface states with a bulk gap of 0.19 eV, as long as the van der Waals interaction is explicitly included in the calculations. Detailed analysis of the band structures of Sb2Se3 thin films indicates that the non-trivial surface state appears at a critical thickness of six quintuple layers.

cond-mat.mes-hall↗

arXiv2016

Molecular dynamics simulations of the lattice thermal conductivity of CuInTe2

The lattice thermal conductivity of thermoelectric material CuInTe2 is predicted using classical molecular dynamics simulations, where a simple but effective Morse-type interatomic potential is constructed by fitting first-principles total energy calculations. In a broad temperature range from 300 to 900 K, our simulated results agree well with those measured experimentally, as well as those obtained from phonon Boltzmann transport equation. By introducing the Cd impurity and Cu vacancy, the thermal conductivity of CuInTe2 can be effectively reduced to further enhance the thermoelectric performance of this chalcopyrite compound.

cond-mat.mtrl-sci↗

arXiv2016

LaPtSb: a half-Heusler compound with high thermoelectric performance

The electronic and transport properties of the half-Heusler compound LaPtSb are investigated by performing first-principles calculations combined with semi-classical Boltzmann theory and deformation potential theory. Compared with many typical half-Heusler compounds, the LaPtSb exhibits obviously larger power factor at room temperature, especially for the n-type system. Together with the very low lattice thermal conductivity, the thermoelectric figure of merit (ZT) of LaPtSb can be optimized to a record high value of 2.2 by fine tuning the carrier concentration.

cond-mat.mtrl-sci↗

arXiv2016

High thermoelectric performance of distorted Bismuth (110) layer

The thermoelectric properties of distorted bismuth (110) layer are investigated using first-principles calculations combined with the Boltzmann transport equation for both electrons and phonons. To accurately predict the electronic and transport properties, the quasiparticle corrections with the GW approximation of many-body effects have been explicitly included. It is found that a maximum ZT value of 6.4 can be achieved for n-type system, which is essentially stemmed from the weak scattering of electrons. Moreover, we demonstrate that the distorted Bi layer remains high ZT values at relatively broad regions of both temperature and carrier concentration. Our theoretical work emphasizes that the deformation potential constant characterizing the electron-phonon scattering strength is an important paradigm for searching high thermoelectric performance materials.

cond-mat.mes-hall↗

arXiv2016

Thermal conductivities of phosphorene allotropes from first-principle calculations: a comparative study

Phosphorene has attracted tremendous interest recently due to its intriguing electronic properties. However, the thermal transport properties of phosphorene, especially for its allotropes, are still not well-understood. In this work, we calculate the thermal conductivities of five phosphorene allotropes (α-, \b{eta}-, γ-, δ- and ζ-phase) by using phonon Boltzmann transport theory combined with first-principles calculations. It is found that the α-phosphorene exhibits considerable anisotropic thermal transport, while it is less obvious in the other four phosphorene allotropes. The highest thermal conductivity is found in the \b{eta}-phosphorene, followed by δ-, γ- and ζ-phase. The much lower thermal conductivity of the ζ-phase can be attributed to its relatively complex atomic configuration. It is expected that the rich thermal transport properties of phosphorene allotropes can have potential applications in the thermoelectrics and thermal management.

cond-mat.mes-hall↗

arXiv2016

Predicting the optimized thermoelectric performance of MgAgSb

Using first-principles method and Boltzmann theory, we provide an accurate prediction of the electronic band structure and thermoelectric transport properties of alpha-MgAgSb. Our calculations demonstrate that only when an appropriate exchange-correlation functional is chosen can we correctly reproduce the semiconducting nature of this compound. By fine tuning the carrier concentration, the thermoelectric performance of alpha-MgAgSb can be significantly optimized, which exhibits a strong temperature dependence and gives a maximum ZT value of 1.7 at 550 K.

cond-mat.mtrl-sci↗

arXiv2015

High thermoelectric performance can be achieved in black phosphorus

Few-layer black phosphorus has recently emerged as a promising candidate for novel electronic and optoelectronic device. Here we demonstrate by first-principles calculations and Boltzmann theory that, black phosphorus could also have potential thermoelectric applications and a fair ZT value of 1.1 can be achieved at elevated temperature. Moreover, such value can be further increased to 5.4 by substituting P atom with Sb atom, giving nominal formula of P0.75Sb0.25. Our theoretical work suggests that high thermoelectric performance can be achieved without using complicated crystal structure or seeking for low-dimensional systems.

cond-mat.mtrl-sci↗