Searcharxiv⌕ Search

arXiv subjects

D. Davesne

Publications and source records attributed to D. Davesne.

At least 37 records · Page 2Linked to original sources

Partial wave decomposition of the N3LO equation of state

By means of a partial wave decomposition, we separate their contributions to the equation of state of symmetric nuclear matter for the N3LO pseudo-potential. In particular, we show that although both the tensor and the spin-orbit terms do not contribute to the equation of state, they give a non-vanishing contribution to the separate (JLS) channels.

nucl-th↗

Effect of three-body forces on response functions in infinite neutron matter

We study the impact of three-body forces on the response functions of cold neutron matter. These response functions are determined in the random phase approximation (RPA) from a residual interaction expressed in terms of Landau parameters. Special attention is paid to the non-central part, including all terms allowed by the relevant symmetries. Using Landau parameters derived from realistic nuclear two- and three-body forces grounded in chiral effective field theory, we find that the three-body term has a strong impact on the excited states of the system and in the static and long-wavelength limit of the response functions for which a new exact formula is established.

nucl-th↗

Nuclear Energy Density Optimization: UNEDF2

The parameters of the UNEDF2 nuclear energy density functional (EDF) model were obtained in an optimization to experimental data consisting of nuclear binding energies, proton radii, odd-even mass staggering data, fission-isomer excitation energies, and single particle energies. In addition to parameter optimization, sensitivity analysis was done to obtain parameter uncertainties and correlations. The resulting UNEDF2 is an all-around EDF. However, the sensitivity analysis also demonstrated that the limits of current Skyrme-like EDFs have been reached and that novel approaches are called for.

nucl-th↗

Linear response theory and neutrino mean free path using Brussels-Montreal Skyrme functionals

The Brussels-Montreal Skyrme functionals have been successful to describe properties of both finite nuclei and infinite homogeneous nuclear matter. In their latest version, these functionals have been equipped with two extra density-dependent terms in order to reproduce simultaneously ground state properties of nuclei and infinite nuclear matter properties while avoiding at the same time the arising of ferromagnetic instabilities. In the present article, we extend our previous results of the linear response theory to include such extra terms at both zero and finite temperature in pure neutron matter. The resulting formalism is then applied to derive the neutrino mean free path. The predictions from the Brussels-Montreal Skyrme functionals are compared with ab-initio methods.

nucl-th↗

Tools for incorporating a D-wave contribution in Skyrme energy density functionals

The possibility of adding a D-wave term to the standard Skyrme effective interaction has been widely considered in the past. Such a term has been shown to appear in the next-to-next-to-leading order of the Skyrme pseudo-potential. The aim of the present article is to provide the necessary tools to incorporate this term in a fitting procedure: first, a mean-field equation written in spherical symmetry in order to describe spherical nuclei and second, the response function to detect unphysical instabilities. With these tools it will be possible to build a new fitting procedure to determine the coupling constants of the new functional.

nucl-th↗

Nuclear energy density optimization: Shell structure

Nuclear density functional theory is the only microscopical theory that can be applied throughout the entire nuclear landscape. Its key ingredient is the energy density functional. In this work, we propose a new parameterization UNEDF2 of the Skyrme energy density functional. The functional optimization is carried out using the POUNDerS optimization algorithm within the framework of the Skyrme Hartree-Fock-Bogoliubov theory. Compared to the previous parameterization UNEDF1, restrictions on the tensor term of the energy density have been lifted, yielding a very general form of the energy density functional up to second order in derivatives of the one-body density matrix. In order to impose constraints on all the parameters of the functional, selected data on single-particle splittings in spherical doubly-magic nuclei have been included into the experimental dataset. The agreement with both bulk and spectroscopic nuclear properties achieved by the resulting UNEDF2 parameterization is comparable with UNEDF1. While there is a small improvement on single-particle spectra and binding energies of closed shell nuclei, the reproduction of fission barriers and fission isomer excitation energies has degraded. As compared to previous UNEDF parameterizations, the parameter confidence interval for UNEDF2 is narrower. In particular, our results overlap well with those obtained in previous systematic studies of the spin-orbit and tensor terms. UNEDF2 can be viewed as an all-around Skyrme EDF that performs reasonably well for both global nuclear properties and shell structure. However, after adding new data aiming to better constrain the nuclear functional, its quality has improved only marginally. These results suggest that the standard Skyrme energy density has reached its limits and significant changes to the form of the functional are needed.

nucl-th↗

Linear response theory in asymmetric nuclear matter for Skyrme functionals including spin-orbit and tensor terms

The formalism of linear response theory for a Skyrme functional including spin-orbit and tensor terms is generalized to the case of infinite nuclear matter with arbitrary isospin asymmetry. Response functions are obtained by solving an algebraic system of equations, which is explicitly given. Spin-isospin strength functions are analyzed varying the conditions of density, momentum transfer, asymmetry and temperature. The presence of instabilities, including the spinodal one, is studied by means of the static susceptibility.

nucl-th↗

Fitting N$^{3}$LO pseudopotentials through central plus tensor Landau parameters

Landau parameters determined from phenomenological finite-range interactions are used to get an estimation of N$^3$LO pseudopotentials parameters. The parameter sets obtained in this way are shown to lead to consistent results concerning saturation properties. The uniqueness of this procedure is discussed, and an estimate of the error induced by the truncation at N$^3$LO is given.

nucl-th↗

Nuclear matter response function with a central plus tensor Landau interaction

We present a method to obtain response functions in the random phase approximation (RPA) based on a residual interaction described in terms of Landau parameters with central plus tensor contributions. The response functions keep the explicit momentum dependence of the RPA, in contrast with the traditional Landau approximation. Results for symmetric nuclear matter and pure neutron matter are presented using Landau parameters derived from finite-range interactions, both phenomenological and microscopic. We study the convergence of response functions as the number of Landau parameters is increased.

nucl-th↗

Spurious finite-size instabilities in nuclear energy density functionals

It is known that some well-established parametrizations of the EDF do not always provide converged results for nuclei and a qualitative link between this finding and the appearance of finite-size instabilities of SNM near saturation density when computed within the RPA has been pointed out. We seek for a quantitative and systematic connection between the impossibility to converge self-consistent calculations of nuclei and the occurrence of finite-size instabilities in SNM for the example of scalar-isovector (S=0, T=1) instabilities of the standard Skyrme EDF. We aim to establish a stability criterion based on computationally-friendly RPA calculations of SNM that is independent on the functional form of the EDF and that can be utilized during the adjustment of its coupling constants. Tuning the coupling constant $C^{ρΔρ}_{1}$ of the gradient term that triggers scalar-isovector instabilities of the standard Skyrme EDF, we find that the occurrence of instabilities in finite nuclei depends strongly on the numerical scheme used to solve the self-consistent mean-field equations. The link to instabilities of SNM is made by extracting the lowest density $ρ_{\text{crit}}$ at which a pole appears at zero energy in the RPA response function when employing the critical value of the coupling constant $C^{ρΔρ}_{1}$ extracted in nuclei. Our analysis suggests a two-fold stability criterion to avoid scalar-isovector instabilities: (i) The density $ρ_{\text{min}}$ corresponding to the lowest pole in the RPA response function should be larger than about 1.2 times the saturation density; (ii) one needs to verify that $ρ_{p}(q_{\text{pq}})$ exhibits a distinct global minimum and is not a decreasing function for large transferred momenta.

nucl-th↗

Skyrme effective pseudopotential up to next-to-next-to leading order

The explicit form of the next-to-next-to-leading order (N2LO) of the Skyrme effective pseudopotential compatible with all required symmetries and especially with gauge invariance is presented in Cartesian basis. It is shown in particular that for such a particular pseudopotential there is no spin-orbit contribution and that the D-wave term suggested in the original Skyrme's formulation does not satisfy the invariance properties. The six new N2LO terms contribute to both the equation of state and Landau parameters. These contributions to symmetric nuclear matter are explicitly given and discussed.

nucl-th↗

Skyrme pseudo-potential-based EDF parametrisation for spuriousity-free MR-EDF calculations

First exploratory steps towards a pseudo-potential-based Skyrme energy density functional for spuriousity-free multi-reference calculations are presented. A qualitatively acceptable fit can be accomplished by adding simple three- and four-body contact terms to the standard central plus spin-orbit two-body terms. To achieve quantitative predictive power, higher-order terms, e.g. velocity-dependent three-body terms, will be required.

nucl-th↗

Fitting Skyrme functionals using linear response theory

Recently, it has been recently shown that the linear response theory in symmetric nuclear matter can be used as a tool to detect finite size instabilities for different Skyrme functionals. In particular it has been shown that there is a correlation between the density at which instabilities occur in infinite matter and the instabilities in finite nuclei. In this article we present a new fitting protocol that uses this correlation to add new additional constraint in Symmetric Infinite Nuclear Matter in order to ensure the stability of finite nuclei against matter fluctuation in all spin and isospin channels. As an application, we give the parameters set for a new Skyrme functional which includes central and spin-orbit parts and which is free from instabilities by construction.

nucl-th↗

Nuclear response for the Skyrme effective interaction with zero-range tensor terms. III. Neutron matter and neutrino propagation

The formalism of the linear response for the Skyrme energy density functional including tensor terms derived in articles [1,2] for nuclear matter is applied here to the case of pure neutron matter. As in article [2] we present analytical results for the response function in all channels, the Landau parameters and the odd-power sum rules. Special emphasis is given to the inverse energy weighted sum rule because it can be used to detect non physical instabilities. Typical examples are discussed and numerical results shown. Moreover, as a direct application, neutrino propagation in neutron matter is investigated through its neutrino mean free path at zero temperature. This quantity turns out to be very sensitive to the tensor terms of the Skyrme energy density functional.

nucl-th↗

Nuclear response for the Skyrme effective interaction with zero-range tensor terms. II. Sum rules and instabilities

The formalism of linear response theory for Skyrme forces including tensor terms presented in article [1] is generalized for the case of a Skyrme energy density functional in infinite matter. We also present analytical results for the odd-power sum rules, with particular attention to the inverse energy weighted sum rule, $M_{-1}$, as a tool to detect instabilities in Skyrme functionals.

nucl-th↗

Linear response in infinite nuclear matter as a tool to reveal finite size instabilities

Nuclear effective interactions are often modelled by simple analytical expressions such as the Skyrme zero-range force. This effective interaction depends on a limited number of parameters that are usually fitted using experimental data obtained from doubly magic nuclei. It was recently shown that many Skyrme functionals lead to the appearance of instabilities, in particular when symmetries are broken, for example unphysical polarization of odd-even or rotating nuclei. In this article, we show how the formalism of the linear response in infinite nuclear matter can be used to predict and avoid the regions of parameters that are responsible for these unphysical instabilities.

nucl-th↗

Numerical solution of the Boltzmann equation for the collective modes of trapped Fermi gases

We numerically solve the Boltzmann equation for trapped fermions in the normal phase using the test-particle method. After discussing a couple of tests in order to estimate the reliability of the method, we apply it to the description of collective modes in a spherical harmonic trap. The numerical results are compared with those obtained previously by taking moments of the Boltzmann equation. We find that the general shape of the response function is very similar in both methods, but the relaxation time obtained from the simulation is significantly longer than that predicted by the method of moments. It is shown that the result of the method of moments can be corrected by including fourth-order moments in addition to the usual second-order ones and that this method agrees very well with our numerical simulations.

cond-mat.quant-gas↗

Nuclear response for the Skyrme effective interaction with zero range tensor terms

The effects of a zero-range tensor component of the effective interaction on nuclear response functions are determined in the so-called RPA approach. Explicit formula in the case of symmetric homogeneous isotropic nuclear matter are given for each spin-isospin excitation channel. It is shown for a typical interaction with tensor couplings that the effects are quantitatively important, mainly in vector channels.

nucl-th↗