arXiv subjects

D. Vitali

Publications and source records attributed to D. Vitali.

At least 19 recordsLinked to original sources

arXiv2026

Probing gravitational interaction between milligram optomechanical oscillators operating in the quantum regime

We present an ongoing optomechanical experiment aimed at detecting gravitational interaction between milligram-scale oscillators, and exploring its interplay with quantum mechanics. The setup employs two microfabricated oscillators coupled via gravity and read out through a high-finesse optical cavity, at ultra-cryogenic temperature. Finite element simulations, noise modelling, and sensitivity estimates demonstrate that gravitational coupling can be detected with integration times ranging from minutes to hours. The experiment establishes a realistic platform for probing gravitational effects in systems approaching the quantum regime.

quant-ph↗

arXiv2025

Correlated Quantum Airy Photons: An Analytical Approach

We describe the generation of correlated photon pairs by means of spontaneous parametric down-conversion of an optical pump in the form of a finite energy Airy beam. The optical system function, which contributes to the propagation of the down-converted beam before being registered by the detectors, is computed. The spectral function is utilized to calculate the biphoton amplitude for finding the coincidence count of the inbound Airy photons in both far-field and near-field configurations. We report the reconstruction of the finite energy Airy beam in the spatial correlation of the down-converted beams in near field scenario. In far field, the coincidence counts resembles the probability density of the biphoton in momentum space, revealing a direct mapping of the anti-correlation of the biphoton momentum. By examining the spatial Schmidt modes, we also demonstrate that longer crystals have tighter real-space correlations, but higher-dimensional angular correlations, whereas shorter crystals have fewer modes in momentum space and broader multimode correlations in position space.

quant-ph↗

arXiv2022

Homodyne coherent quantum noise cancellation in a hybrid optomechanical force sensor

In this paper, we propose an experimentally viable scheme to enhance the sensitivity of force detection in a hybrid optomechanical setup assisted by squeezed vacuum injection, beyond the standard quantum limit (SQL). The scheme is based on a combination of the coherent quantum noise cancellation (CQNC) strategy with a variational homodyne detection of the cavity output spectrum in which the phase of the local oscillator is optimized. In CQNC, realizing a negative-mass oscillator in the system leads to exact cancellation of the backaction noise from the mechanics due to destructive quantum interference. Squeezed vacuum injection enhances this cancellation and allows sub-SQL sensitivity to be reached in a wide frequency band and at much lower input laser powers. We show here that the adoption of variational homodyne readout enables us to enhance this noise cancellation up to $40 ~\mathrm{dB}$ compared to the standard case of detection of the optical output phase quadrature, leading to a remarkable force sensitivity of the order of $10^{-19} \mathrm{N}/\sqrt{\mathrm{Hz}}$, around 2-order enhancement compared to the standard case. Moreover, we show that at nonzero cavity detuning, the signal response can be amplified at a level three to five times larger than that in the standard case without variational homodyne readout, improving the signal-to-noise-ratio (SNR). Finally, the variational readout CQNC developed in this paper may be applied to other optomechanical-like platforms such as levitated systems and multimode optomechanical arrays or crystals as well as Josephson-based optomechanical systems.

quant-ph↗

arXiv2022

Supervised learning of random quantum circuits via scalable neural networks

Predicting the output of quantum circuits is a hard computational task that plays a pivotal role in the development of universal quantum computers. Here we investigate the supervised learning of output expectation values of random quantum circuits. Deep convolutional neural networks (CNNs) are trained to predict single-qubit and two-qubit expectation values using databases of classically simulated circuits. These circuits are represented via an appropriately designed one-hot encoding of the constituent gates. The prediction accuracy for previously unseen circuits is analyzed, also making comparisons with small-scale quantum computers available from the free IBM Quantum program. The CNNs often outperform the quantum devices, depending on the circuit depth, on the network depth, and on the training set size. Notably, our CNNs are designed to be scalable. This allows us exploiting transfer learning and performing extrapolations to circuits larger than those included in the training set. These CNNs also demonstrate remarkable resilience against noise, namely, they remain accurate even when trained on (simulated) expectation values averaged over very few measurements.

quant-ph↗

arXiv2021

Force sensing in an optomechanical system with feedback-controlled in-loop light

Quantum control techniques applied at macroscopic scales provide us with opportunities in fundamental physics and practical applications. Among them, measurement-based feedback allows efficient control of optomechanical systems and quantum-enhanced sensing. In this paper, we propose a near-resonant narrow-band force sensor with extremely low optically added noise in an optomechanical system subject to a feedback-controlled in-loop light. The membrane's intrinsic motion consisting of zero-point motion and thermal motion is affected by the added noise of measurement due to the backaction noise and imprecision noise. We show that, in the optimal low-noise regime, the system is analogous to an optomechanical system containing a near quantum-limited optical parametric amplifier coupled to an engineered reservoir interacting with the cavity. Therefore, the feedback loop enhances the mechanical response of the system to the input while keeping the optically added noise of measurement below the standard quantum limit. Moreover, the system based on feedback offers a much larger amplification bandwidth than the same system with no feedback.

quant-ph↗

arXiv2020

Probing quantum gravity effects with quantum mechanical oscillators

Phenomenological models aiming to join gravity and quantum mechanics often predict effects that are potentially measurable in refined low-energy experiments. For instance, modified commutation relations between position and momentum, that accounts for a minimal scale length, yield a dynamics that can be codified in additional Hamiltonian terms. When applied to the paradigmatic case of a mechanical oscillator, such terms, at the lowest order in the deformation parameter, introduce a weak intrinsic nonlinearity and, consequently, deviations from the classical trajectory. This point of view has stimulated several experimental proposals and realizations, leading to meaningful upper limits to the deformation parameter. All such experiments are based on classical mechanical oscillators, i.e., excited from a thermal state. We remark indeed that decoherence, that plays a major role in distinguishing the classical from the quantum behavior of (macroscopic) systems, is not usually included in phenomenological quantum gravity models. However, it would not be surprising if peculiar features that are predicted by considering the joined roles of gravity and quantum physics should manifest themselves just on purely quantum objects. On the base of this consideration, we propose experiments aiming to observe possible quantum gravity effects on macroscopic mechanical oscillators that are preliminary prepared in a high purity state, and we report on the status of their realization.

quant-ph↗

arXiv2020

Microwave quantum illumination using a digital receiver

Quantum illumination is a powerful sensing technique that employs entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. The promised advantage over classical strategies is particularly evident at low signal powers, a feature which could make the protocol an ideal prototype for non-invasive biomedical scanning or low-power short-range radar. In this work we experimentally investigate the concept of quantum illumination at microwave frequencies. We generate entangled fields using a Josephson parametric converter to illuminate a room-temperature object at a distance of 1 meter in a free-space detection setup. We implement a digital phase conjugate receiver based on linear quadrature measurements that outperforms a symmetric classical noise radar in the same conditions despite the entanglement-breaking signal path. Starting from experimental data, we also simulate the case of perfect idler photon number detection, which results in a quantum advantage compared to the relative classical benchmark. Our results highlight the opportunities and challenges on the way towards a first room-temperature application of microwave quantum circuits.

quant-ph↗

arXiv2019

Quantum correlations in optomechanical crystals

The field of optomechanics provides us with several examples of quantum photon-phonon interface. In this paper, we theoretically investigate the generation and manipulation of quantum correlations in a microfabricated optomechanical array. We consider a system consisting of localized photonic and phononic modes interacting locally via radiation pressure at each lattice site with the possibility of hopping of photons and phonons between neighboring sites. We show that such an interaction can correlate various modes of a driven coupled optomechanical array with well-chosen system parameters. Moreover, in the linearized regime of Gaussian fluctuations, the quantum correlations not only survive in the presence of thermal noise, but may also be generated thermally. We find that these optomechanical arrays provide a suitable platform for quantum simulation of various many-body systems.

quant-ph↗

arXiv2018

aKWISP: investigating short-distance interactions at sub-micron scales

The sub-micron range in the field of short distance interactions has yet to be opened to experimental investigation, and may well hold the key to understanding al least part of the dark matter puzzle. The aKWISP (advanced-KWISP) project introduces the novel Double Membrane Interaction Monitor (DMIM), a combined source-sensing device where interaction distances can be as short as 100 nm or even 10 nm, much below the 1-10 micron distance which is the lower limit encountered by current experimental efforts. aKWISP builds on the technology and the results obtained with the KWISP opto-mechanical force sensor now searching at CAST for the direct coupling to matter of solar chameleons. It will reach the ultimate quantum-limited sensitivity by exploiting an array of technologies, including operation at milli-Kelvin temperatures. Recent suggestions point at short-distance interactions studies as intriguing possibilities for the detection of axions and of new physical phenomena.

physics.ins-det↗

arXiv2018

Sensitivity-bandwidth limit in a multi-mode opto-electro-mechanical transducer

An opto--electro--mechanical system formed by a nanomembrane capacitively coupled to an LC resonator and to an optical interferometer has been recently employed for the high--sensitive optical readout of radio frequency (RF) signals [T. Bagci, \emph{et~al.}, Nature {\bf 507}, 81 (2013)]. Here we propose and experimentally demonstrate how the bandwidth of such kind of transducer can be increased by controlling the interference between two--electromechanical interaction pathways of a two--mode mechanical system. With a proof--of--principle device \new{operating at room temperature, we achieve a sensitivity of 300 nV/Hz^(1/2) over a bandwidth of 15 kHz in the presence of radiofrequency noise, and an optimal shot-noise limited sensitivity of 10 nV/Hz^(1/2) over a bandwidth of 5 kHz. We discuss strategies for improving the performance of the device, showing that, for the same given sensitivity, a mechanical multi--mode transducer can achieve a bandwidth} significantly larger than that of a single-mode one.

quant-ph↗

arXiv2017

Synchronization dynamics of two nanomechanical membranes within a Fabry-Perot cavity

Spontaneous synchronization is a significant collective behavior of weakly coupled systems. Due to their inherent nonlinear nature, optomechanical systems can exhibit self-sustained oscillations which can be exploited for synchronizing different mechanical resonators. In this paper, we explore the synchronization dynamics of two membranes coupled to a common optical field within a cavity, and pumped with a strong blue-detuned laser drive. We focus on the system quantum dynamics in the parameter regime corresponding to synchronization of the classical motion of the two membranes. With an appropriate definition of the phase difference operator for the resonators, we study synchronization in the quantum case through the covariance matrix formalism. We find that for sufficiently large driving, quantum synchronization is robust with respect to quantum fluctuations and to thermal noise up to not too large temperatures. Under synchronization, the two membranes are never entangled, while quantum discord behaves similarly to quantum synchronization, that is, it is larger when the variance of the phase difference is smaller.

quant-ph↗

arXiv2016

Cavity Mode Frequencies and Strong Optomechanical Coupling in Two-Membrane Cavity Optomechanics

We study the cavity mode frequencies of a Fabry-Pérot cavity containing two vibrating dielectric membranes. We derive the equations for the mode resonances and provide approximate analytical solutions for them as a function of the membrane positions, which act as an excellent approximation when the relative and center-of-mass position of the two membranes are much smaller than the cavity length. With these analytical solutions, one finds that extremely large optomechanical coupling of the membrane relative motion can be achieved in the limit of highly reflective membranes when the two membranes are placed very close to a resonance of the inner cavity formed by them. We also study the cavity finesse of the system and verify that, under the conditions of large coupling, it is not appreciably affected by the presence of the two membranes. The achievable large values of the ratio between the optomechanical coupling and the cavity decay rate, $g/κ$, make this two-membrane system the simplest promising platform for implementing cavity optomechanics in the strong coupling regime.

quant-ph↗

arXiv2016

Force sensing based on coherent quantum noise cancellation in a hybrid optomechanical cavity with squeezed-vacuum injection

We propose and analyse a feasible experimental scheme for a quantum force sensor based on the elimination of back-action noise through coherent quantum noise cancellation (CQNC) in a hybrid atom-cavity optomechanical setup assisted with squeezed vacuum injection. The force detector, which allows for a continuous, broad-band detection of weak forces well below the standard quantum limit (SQL), is formed by a single optical cavity simultaneously coupled to a mechanical oscillator and to an ensemble of ultracold atoms. The latter acts as a negative-mass oscillator so that atomic noise cancels exactly the back-action noise from the mechanical oscillator due to destructive quantum interference. Squeezed vacuum injection enforces this cancellation and allows to reach sub-SQL sensitivity in a very wide frequency band, and at much lower input laser powers.

quant-ph↗

arXiv2015

Microfabrication of large area high-stress silicon nitride membranes for optomechanical devices

In view of the integration of membrane resonators with more complex MEMS structures, we developed a general fabrication procedure for circular shape SiN$_x$ membranes using Deep Reactive Ion Etching (DRIE). Large area and high-stress SiN$_x$ membranes were fabricated and used as optomechanical resonators in a Michelson interferometer and in a Fabry-Pérot cavity. The measurements show that the fabrication process preserves both the optical quality and the mechanical quality factor of the membrane.

quant-ph↗

arXiv2015

Generation and detection of large and robust entanglement between two different mechanical resonators in cavity optomechanics

We investigate a general scheme for generating, either dynamically or in the steady state, continuous variable entanglement between two mechanical resonators with different frequencies. We employ an optomechanical system in which a single optical cavity mode driven by a suitably chosen two-tone field is coupled to the two resonators. Significantly large mechanical entanglement can be achieved, which is extremely robust with respect to temperature.

quant-ph↗

arXiv2014

Entangling two distant non-interacting microwave modes

We propose a protocol able to prepare two remote and initially uncorrelated microwave modes in an entangled stationary state, which is certifiable using only local optical homodyne measurements. The protocol is an extension of continuous variable entanglement swapping, and exploits two hybrid quadripartite opto-electro-mechanical systems in which a nanomechanical resonator acts as a quantum interface able to entangle optical and microwave fields. The proposed protocol allows to circumvent the problems associated with the fragility of microwave photons with respect to thermal noise and may represent a fundamental tool for the realization of quantum networks connecting distant solid-state and superconducting qubits, which are typically manipulated with microwave fields. The certifying measurements on the optical modes guarantee the success of entanglement swapping without the need of performing explicit measurements on the distant microwave fields.

quant-ph↗

arXiv2014

The prospect of detecting single-photon force effects in cavity optomechanics

Cavity optomechanical systems are approaching a strong-coupling regime where the coherent dynamics of nanomechanical resonators can be manipulated and controlled by optical fields at the single photon level. Here we propose an interferometric scheme able to detect optomechanical coherent interaction at the single-photon level which is experimentally feasible with state-of-the-art devices.

quant-ph↗

arXiv2014

Frequency noise cancellation in optomechanical systems for ponderomotive squeezing

Ponderomotive squeezing of the output light of an optical cavity has been recently observed in the MHz range in two different cavity optomechanical devices. Quadrature squeezing becomes particularly useful at lower spectral frequencies, for example in gravitational wave interferometers, despite being more sensitive to excess phase and frequency noise. Here we show a phase/frequency noise cancellation mechanism due to destructive interference which can facilitate the production of ponderomotive squeezing in the kHz range and we demonstrate it experimentally in an optomechanical system formed by a Fabry-Pérot cavity with a micro-mechanical mirror.

quant-ph↗