arXiv subjects

D. Ward-Thompson

Publications and source records attributed to D. Ward-Thompson.

At least 55 records · Page 3Linked to original sources

arXiv2015

The JCMT Gould Belt Survey: A First Look at Dense Cores in Orion B

We present a first look at the SCUBA-2 observations of three sub-regions of the Orion B molecular cloud: LDN 1622, NGC 2023/2024, and NGC 2068/2071, from the JCMT Gould Belt Legacy Survey. We identify 29, 564, and 322 dense cores in L1622, NGC 2023/2024, and NGC 2068/2071 respectively, using the SCUBA-2 850 micron map, and present their basic properties, including their peak fluxes, total fluxes, and sizes, and an estimate of the corresponding 450 micron peak fluxes and total fluxes, using the FellWalker source extraction algorithm. Assuming a constant temperature of 20 K, the starless dense cores have a mass function similar to that found in previous dense core analyses, with a Salpeter-like slope at the high-mass end. The majority of cores appear stable to gravitational collapse when considering only thermal pressure; indeed, most of the cores which have masses above the thermal Jeans mass are already associated with at least one protostar. At higher cloud column densities, above 1-2 x 10^23 cm^-2, most of the mass is found within dense cores, while at lower cloud column densities, below 1 x 10^23 cm^-2, this fraction drops to 10% or lower. Overall, the fraction of dense cores associated with a protostar is quite small (<8%), but becomes larger for the densest and most centrally concentrated cores. NGC 2023 / 2024 and NGC 2068/2071 appear to be on the path to forming a significant number of stars in the future, while L1622 has little additional mass in dense cores to form many new stars.

astro-ph.SR↗

arXiv2015

From forced collapse to H ii region expansion in Mon R2: Envelope density structure and age determination with Herschel

The surroundings of HII regions can have a profound influence on their development, morphology, and evolution. This paper explores the effect of the environment on H II regions in the MonR2 molecular cloud. We aim to investigate the density structure of envelopes surrounding HII regions and to determine their collapse and ionisation expansion ages. The Mon R2 molecular cloud is an ideal target since it hosts an H II region association. Column density and temperature images derived from Herschel data were used together to model the structure of HII bubbles and their surrounding envelopes. The resulting observational constraints were used to follow the development of the Mon R2 ionised regions with analytical calculations and numerical simulations. The four hot bubbles associated with H II regions are surrounded by dense, cold, and neutral gas envelopes. The radial density profiles are reminiscent of those of low-mass protostellar envelopes. The inner parts of envelopes of all four HII regions could be free-falling because they display shallow density profiles. As for their outer parts, the two compact HII regions show a density profile, which is typical of the equilibrium structure of an isothermal sphere. In contrast, the central UCHii region shows a steeper outer profile, that could be interpreted as material being forced to collapse. The size of the heated bubbles, the spectral type of the irradiating stars, and the mean initial neutral gas density are used to estimate the ionisation expansion time, texp, 0.1Myr,for the dense UCHII and compact HII regions and 0.35 Myr for the extended HII region. The envelope transition radii between the shallow and steeper density profiles are used to estimate the time elapsed since the formation of the first proto stellar embryo, Tinf : 1Myr, for the ultra-compact, 1.5 / 3Myr for the compact, and greater than 6Myr for the extended HII regions.

astro-ph.SR↗

arXiv2015

The JCMT Gould Belt Survey: A Quantitative Comparison Between SCUBA-2 Data Reduction Methods

Performing ground-based submillimetre observations is a difficult task as the measurements are subject to absorption and emission from water vapour in the Earth's atmosphere and time variation in weather and instrument stability. Removing these features and other artifacts from the data is a vital process which affects the characteristics of the recovered astronomical structure we seek to study. In this paper, we explore two data reduction methods for data taken with the Submillimetre Common-User Bolometer Array-2 (SCUBA-2) at the James Clerk Maxwell Telescope (JCMT). The JCMT Legacy Reduction 1 (JCMT LR1) and The Gould Belt Legacy Survey Legacy Release 1 (GBS LR1) reduction both use the same software, Starlink, but differ in their choice of data reduction parameters. We find that the JCMT LR1 reduction is suitable for determining whether or not compact emission is present in a given region and the GBS LR1 reduction is tuned in a robust way to uncover more extended emission, which better serves more in-depth physical analyses of star-forming regions. Using the GBS LR1 method, we find that compact sources are recovered well, even at a peak brightness of only 3 times the noise, whereas the reconstruction of larger objects requires much care when drawing boundaries around the expected astronomical signal in the data reduction process. Incorrect boundaries can lead to false structure identification or it can cause structure to be missed. In the JCMT LR1 reduction, the extent of the true structure of objects larger than a point source is never fully recovered.

astro-ph.IM↗

arXiv2015

A possible link between the power spectrum of interstellar filaments and the origin of the prestellar core mass function

Two major features of the prestellar CMF are: 1) a broad peak below 1 Msun, presumably corresponding to a mean gravitational fragmentation scale, and 2) a characteristic power-law slope, very similar to the Salpeter slope of the stellar initial mass function (IMF) at the high-mass end. While recent Herschel observations have shown that the peak of the prestellar CMF is close to the thermal Jeans mass in marginally supercritical filaments, the origin of the power-law tail of the CMF/IMF at the high-mass end is less clear. Inutsuka (2001) proposed a theoretical scenario in which the origin of the power-law tail can be understood as resulting from the growth of an initial spectrum of density perturbations seeded along the long axis of filaments by interstellar turbulence. Here, we report the statistical properties of the line-mass fluctuations of filaments in nearby molecular clouds observed with Herschel using a 1-D power spectrum analysis. The observed filament power spectra were fitted by a power-law function $(P_{true}(s) \propto s^α)$ after removing the effect of beam convolution at small scales. A Gaussian-like distribution of power-spectrum slopes was found centered at -1.6, close to that of the one-dimensional velocity power spectrum generated by subsonic Kolomogorov turbulence (-1.67). An empirical correlation, $P^{0.5}(s_0) \propto ^{1.4 \pm 0.1} $, was also found between the amplitude of each filament power spectrum $P(s_0)$ and the mean column density along the filament $ $. Finally, the dispersion of line-mass fluctuations along each filament $σ_{\rm M_{line}}$ was found to scale with the physical length $L$ of the filament, roughly as $σ_{M_{line}} \propto L^{0.7}$. Overall, our results are consistent with the suggestion that the bulk of the CMF/IMF results from the gravitational fragmentation of filaments.

astro-ph.GA↗

arXiv2015

Filaments in the Lupus molecular clouds

We have studied the filaments extracted from the column density maps of the nearby Lupus 1, 3, and 4 molecular clouds, derived from photometric maps observed with the Herschel satellite. Filaments in the Lupus clouds have quite low column densities, with a median value of $\sim$1.5$\times$10$^{21}$ cm$^{-2}$ and most have masses per unit length lower than the maximum critical value for radial gravitational collapse. Indeed, no evidence of filament contraction has been seen in the gas kinematics. We find that some filaments, that on average are thermally subcritical, contain dense cores that may eventually form stars. This is an indication that in the low column density regime, the critical condition for the formation of stars may be reached only locally and this condition is not a global property of the filament. Finally, in Lupus we find multiple observational evidences of the key role that the magnetic field plays in forming filaments, and determining their confinement and dynamical evolution.

astro-ph.GA↗

arXiv2015

A census of dense cores in the Aquila cloud complex: SPIRE/PACS observations from the Herschel Gould Belt survey

We present and discuss the results of the Herschel Gould Belt survey observations in a ~11 deg^2 area of the Aquila molecular cloud complex at d~260 pc, imaged with the SPIRE/PACS cameras from 70 to 500 micron. We identify a complete sample of starless dense cores and embedded protostars in this region, and analyze their global properties and spatial distributions. We find a total of 651 starless cores, ~60% of which are gravitationally bound prestellar cores, and they will likely form stars in the future. We also detect 58 protostellar cores. The core mass function (CMF) derived for the prestellar cores is very similar in shape to the stellar initial mass function (IMF), supporting the earlier view that there is a close physical link between the IMF and the CMF. The global shift in mass scale observed between the CMF and the IMF is consistent with a typical star formation efficiency of ~40%. By comparing the numbers of starless cores to the number of young stellar objects, we estimate that the lifetime of prestellar cores is ~1 Myr. We find a strong correlation between the spatial distribution of prestellar cores and the densest filaments. About 90% of the Herschel-identified prestellar cores are located above a background column density corresponding to A_V~7, and ~75% of them lie within filamentary structures with supercritical masses per unit length >~16 M_sun/pc. These findings support a picture wherein the cores making up the peak of the CMF (and probably responsible for the base of the IMF) result primarily from the gravitational fragmentation of marginally supercritical filaments. Given that filaments appear to dominate the mass budget of dense gas at A_V>7, our findings also suggest that the physics of prestellar core formation within filaments is responsible for a characteristic "efficiency" SFR/M_dense ~5+-2 x 10^-8 yr^-1 for the star formation process in dense gas.

astro-ph.GA↗

arXiv2015

The JCMT Gould Belt Survey: SCUBA-2 observations of circumstellar disks in L 1495

We present 850$μ$m and 450$μ$m data from the JCMT Gould Belt Survey obtained with SCUBA-2 and characterise the dust attributes of Class I, Class II and Class III disk sources in L1495. We detect 23% of the sample at both wavelengths, with the detection rate decreasing through the Classes from I--III. The median disk mask is 1.6$\times 10^{-3}$M$_{\odot}$, and only 7% of Class II sources have disk masses larger than 20 Jupiter masses. We detect a higher proportion of disks towards sources with stellar hosts of spectral type K than spectral type M. Class II disks with single stellar hosts of spectral type K have higher masses than those of spectral type M, supporting the hypothesis that higher mass stars have more massive disks. Variations in disk masses calculated at the two wavelengths suggests there may be differences in dust opacity and/or dust temperature between disks with hosts of spectral types K to those with spectral type M.

astro-ph.GA↗

arXiv2015

The JCMT Gould Belt Survey: First results from the SCUBA-2 observations of the Ophiuchus molecular cloud and a virial analysis of its prestellar core population

In this paper we present the first observations of the Ophiuchus molecular cloud performed as part of the James Clerk Maxwell Telescope (JCMT) Gould Belt Survey (GBS) with the SCUBA-2 instrument. We demonstrate methods for combining these data with previous HARP CO, Herschel, and IRAM N$_{2}$H$^{+}$ observations in order to accurately quantify the properties of the SCUBA-2 sources in Ophiuchus. We produce a catalogue of all of the sources found by SCUBA-2. We separate these into protostars and starless cores. We list all of the starless cores and perform a full virial analysis, including external pressure. This is the first time that external pressure has been included in this level of detail. We find that the majority of our cores are either bound or virialised. Gravitational energy and external pressure are on average of a similar order of magnitude, but with some variation from region to region. We find that cores in the Oph A region are gravitationally bound prestellar cores, while cores in the Oph C and E regions are pressure-confined. We determine that N$_{2}$H$^{+}$ is a good tracer of the bound material of prestellar cores, although we find some evidence for N$_{2}$H$^{+}$ freeze-out at the very highest core densities. We find that non-thermal linewidths decrease substantially between the gas traced by C$^{18}$O and that traced by N$_{2}$H$^{+}$, indicating the dissipation of turbulence at higher densities. We find that the critical Bonnor-Ebert stability criterion is not a good indicator of the boundedness of our cores. We detect the pre-brown dwarf candidate Oph B-11 and find a flux density and mass consistent with previous work. We discuss regional variations in the nature of the cores and find further support for our previous hypothesis of a global evolutionary gradient across the cloud from southwest to northeast, indicating sequential star formation across the region.

astro-ph.GA↗

arXiv2015

6.7GHz Methanol Maser Associated Outflows: An evolutionary sequence

We present a continuing study of a sample 44 molecular outflows, observed in 13CO lines, closely associated with 6.7GHz methanol masers, hence called Methanol Maser Associated Outflows (MMAOs). We compare MMAO properties with those of outflows from other surveys in the literature. In general, MMAOs follow similar trends, but show a deficit in number at low masses and momenta, with a corresponding higher fraction at the high end of the distributions. A similar trend is seen for the dynamical timescales of MMAOs. We argue that the lack of relatively low mass and young flows in MMAOs is due to the inherent selection-bias in the sample, i.e. its direct association with 6.7GHz methanol masers. This implies that methanol masers must switch on after the onset of outflows (hence accretion), and not before a sufficient abundance of methanol is liberated from icy dust mantles. Consequently the average dynamical age of MMAOs is older than for the general population of molecular outflows. We propose an adjusted evolutionary sequence of outflow and maser occurrence in the hot core phase, where methanol masers turn on after the onset of the outflow phase.

astro-ph.SR↗

arXiv2014

The JCMT Gould Belt Survey: Evidence for radiative heating in Serpens MWC 297 and its influence on local star formation

We present SCUBA-2 450micron and 850micron observations of the Serpens MWC 297 region, part of the JCMT Gould Belt Survey of nearby star-forming regions. Simulations suggest that radiative feedback influences the star-formation process and we investigate observational evidence for this by constructing temperature maps. Maps are derived from the ratio of SCUBA-2 fluxes and a two component model of the JCMT beam for a fixed dust opacity spectral index of beta = 1.8. Within 40 of the B1.5Ve Herbig star MWC 297, the submillimetre fluxes are contaminated by free-free emission with a spectral index of 1.03+-0.02, consistent with an ultra-compact HII region and polar winds/jets. Contamination accounts for 73+-5 per cent and 82+-4 per cent of peak flux at 450micron and 850micron respectively. The residual thermal disk of the star is almost undetectable at these wavelengths. Young Stellar Objects are confirmed where SCUBA-2 850micron clumps identified by the fellwalker algorithm coincide with Spitzer Gould Belt Survey detections. We identify 23 objects and use Tbol to classify nine YSOs with masses 0.09 to 5.1 Msun. We find two Class 0, one Class 0/I, three Class I and three Class II sources. The mean temperature is 15+-2K for the nine YSOs and 32+-4K for the 14 starless clumps. We observe a starless clump with an abnormally high mean temperature of 46+-2K and conclude that it is radiatively heated by the star MWC 297. Jeans stability provides evidence that radiative heating by the star MWC 297 may be suppressing clump collapse.

astro-ph.SR↗

arXiv2014

Methanol Maser Associated Outflows: Detection statistics and properties

We have selected the positions of 54 6.7GHz methanol masers from the Methanol Multibeam Survey catalogue, covering a range of longitudes between $20^{\circ}$ and $34^{\circ}$ of the Galactic Plane. These positions were mapped in the J=3-2 transition of both the $\rm{^{13}CO}$ and $\rm{C^{18}O}$ lines. A total of 58 $\rm{^{13}CO}$ emission peaks are found in the vicinity of these maser positions. We search for outflows around all $\rm{^{13}CO}$ peaks, and find evidence for high-velocity gas in all cases, spatially resolving the red and blue outflow lobes in 55 cases. Of these sources, 44 have resolved kinematic distances, and are closely associated with the 6.7GHz masers, a sub-set referred to as Methanol Maser Associated Outflows (MMAOs). We calculate the masses of the clumps associated with each peak using 870 $\rm{μm}$ continuum emission from the ATLASGAL survey. A strong correlation is seen between the clump mass and both outflow mass and mechanical force, lending support to models in which accretion is strongly linked to outflow. We find that the scaling law between outflow activity and clump masses observed for low-mass objects, is also followed by the MMAOs in this study, indicating a commonality in the formation processes of low-mass and high-mass stars.

astro-ph.SR↗

arXiv2014

Attitude determination for balloon-borne experiments

An attitude determination system for balloon-borne experiments is presented. The system provides pointing information in azimuth and elevation for instruments flying on stratospheric balloons over Antarctica. In-flight attitude is given by the real-time combination of readings from star cameras, a magnetometer, sun sensors, GPS, gyroscopes, tilt sensors and an elevation encoder. Post-flight attitude reconstruction is determined from star camera solutions, interpolated by the gyroscopes using an extended Kalman Filter. The multi-sensor system was employed by the Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol), an experiment that measures polarized thermal emission from interstellar dust clouds. A similar system was designed for the upcoming flight of SPIDER, a Cosmic Microwave Background polarization experiment. The pointing requirements for these experiments are discussed, as well as the challenges in designing attitude reconstruction systems for high altitude balloon flights. In the 2010 and 2012 BLASTPol flights from McMurdo Station, Antarctica, the system demonstrated an accuracy of <5' rms in-flight, and <5" rms post-flight.

astro-ph.IM↗

arXiv2014

The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry-BLASTPol: Performance and results from the 2012 Antarctic flight

The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital mapping experiment, designed to study the role played by magnetic fields in the star formation process. BLASTPol observes polarized light using a total power instrument, photolithographic polarizing grids, and an achromatic half-wave plate to modulate the polarization signal. During its second flight from Antarctica in December 2012, BLASTPol made degree scale maps of linearly polarized dust emission from molecular clouds in three wavebands, centered at 250, 350, and 500 microns. The instrumental performance was an improvement over the 2010 BLASTPol flight, with decreased systematics resulting in a higher number of confirmed polarization vectors. The resultant dataset allows BLASTPol to trace magnetic fields in star-forming regions at scales ranging from cores to entire molecular cloud complexes.

astro-ph.IM↗

arXiv2014

Thermal design and performance of the balloon-borne large aperture submillimeter telescope for polarimetry BLASTPol

We present the thermal model of the Balloon-borne Large-Aperture Submillimeter Telescope for Polarimetry (BLASTPol). This instrument was successfully flown in two circumpolar flights from McMurdo, Antarctica in 2010 and 2012. During these two flights, BLASTPol obtained unprecedented information about the magnetic field in molecular clouds through the measurement of the polarized thermal emission of interstellar dust grains. The thermal design of the experiment addresses the stability and control of the payload necessary for this kind of measurement. We describe the thermal modeling of the payload including the sun-shielding strategy. We present the in-flight thermal performance of the instrument and compare the predictions of the model with the temperatures registered during the flight. We describe the difficulties of modeling the thermal behavior of the balloon-borne platform and establish landmarks that can be used in the design of future balloon-borne instruments.

astro-ph.IM↗

arXiv2014

BLASTbus electronics: general-purpose readout and control for balloon-borne experiments

We present the second generation BLASTbus electronics. The primary purposes of this system are detector readout, attitude control, and cryogenic housekeeping, for balloon-borne telescopes. Readout of neutron transmutation doped germanium (NTD-Ge) bolometers requires low noise and parallel acquisition of hundreds of analog signals. Controlling a telescope's attitude requires the capability to interface to a wide variety of sensors and motors, and to use them together in a fast, closed loop. To achieve these different goals, the BLASTbus system employs a flexible motherboard-daughterboard architecture. The programmable motherboard features a digital signal processor (DSP) and field-programmable gate array (FPGA), as well as slots for three daughterboards. The daughterboards provide the interface to the outside world, with versions for analog to digital conversion, and optoisolated digital input/output. With the versatility afforded by this design, the BLASTbus also finds uses in cryogenic, thermometry, and power systems. For accurate timing control to tie everything together, the system operates in a fully synchronous manner. BLASTbus electronics have been successfully deployed to the South Pole, and flown on stratospheric balloons.

astro-ph.IM↗

arXiv2014

Comparison of Prestellar Core Elongations and Large-Scale Molecular Cloud Structures in the Lupus I Region

Turbulence and magnetic fields are expected to be important for regulating molecular cloud formation and evolution. However, their effects on subparsec to 100 parsec scales, leading to the formation of starless cores, is not well understood. We investigate the prestellar core structure morphologies obtained from analysis of the Herschel-SPIRE 350 $μ$m maps of the Lupus I cloud. This distribution is first compared on a statistical basis to the large scale shape of the main filament. We find the distribution of the elongation position angle of the cores to be consistent with a random distribution, which means no specific orientation of the morphology of the cores is observed with respect to a large-scale filament shape model for Lupus I, or relative to a large-scale bent filament model. This distribution is also compared to the mean orientation of the large-scale magnetic fields probed at 350 $μ$m with the Balloon-borne Large Aperture Telescope for Polarimetry (BLASTPol) during its 2010 campaign. Here again we do not find any correlation between the core morphology distribution and the average orientation of the magnetic fields on parsec scales. Our main conclusion is that the local filament dynamics - including secondary filaments that often run orthogonally to the primary filament - and possibly small-scale variations in the local magnetic field direction, could be the dominant factors for explaining the final orientation of each core.

astro-ph.GA↗

arXiv2014

A Herschel and BIMA study of the sequential star formation near the W48A HII region

We present the results of Herschel HOBYS photometric mapping combined with BIMA observations and additional archival data, and perform an in-depth study of the evolutionary phases of the star-forming clumps in W 48A and their surroundings. Age estimates for the compact sources were derived from bolometric luminosities and envelope masses, which were obtained from the dust continuum emission, and agree within an order of magnitude with age estimates from molecular line and radio data. The clumps in W 48A are linearly aligned by age (east-old to west-young): we find a ultra compact (UC) HII region, a young stellar object (YSO) with class II methanol maser emission, a YSO with a massive outflow, and finally the NH_2D prestellar cores from Pillai et al. This remarkable positioning reflects the (star) formation history of the region. We find that it is unlikely that the star formation in the W 48A molecular cloud was triggered by the UCHII region and discuss the Aquila supershell expansion as a mayor influence on the evolution of W 48A. We conclude that the combination of Herschel continuum data with interferometric molecular line and radio continuum data is important to derive trustworthy age estimates and interpret the origin of large scale structures through kinematic information.

astro-ph.GA↗

arXiv2014

Properties of Starless and Prestellar Cores in Taurus Revealed by Herschel SPIRE/PACS Imaging

The density and temperature structures of dense cores in the L1495 cloud of the Taurus star-forming region are investigated using Herschel SPIRE and PACS images in the 70 $μ$m, 160 $μ$m, 250 $μ$m, 350 $μ$m and 500 $μ$m continuum bands. A sample consisting of 20 cores, selected using spectral and spatial criteria, is analysed using a new maximum likelihood technique, COREFIT, which takes full account of the instrumental point spread functions. We obtain central dust temperatures, $T_0$, in the range 6-12 K and find that, in the majority of cases, the radial density falloff at large radial distances is consistent with the $r^{-2}$ variation expected for Bonnor-Ebert spheres. Two of our cores exhibit a significantly steeper falloff, however, and since both appear to be gravitationally unstable, such behaviour may have implications for collapse models. We find a strong negative correlation between $T_0$ and peak column density, as expected if the dust is heated predominantly by the interstellar radiation field. At the temperatures we estimate for the core centres, carbon-bearing molecules freeze out as ice mantles on dust grains, and this behaviour is supported here by the lack of correspondence between our estimated core locations and the previously-published positions of H$^{13}$CO$^+$ peaks. On this basis, our observations suggest a sublimation-zone radius typically $\sim 10^4$ AU. Comparison with previously-published N$_2$H$^+$ data at 8400 AU resolution, however, shows no evidence for N$_2$H$^+$ depletion at that resolution.

astro-ph.GA↗