arXiv subjects

D. Ward-Thompson

Publications and source records attributed to D. Ward-Thompson.

At least 73 records · Page 4Linked to original sources

arXiv2013

Reconstructing the density and temperature structure of prestellar cores from $Herschel$ data: A case study for B68 and L1689B

Utilizing multi-wavelength dust emission maps acquired with $Herschel$, we reconstruct local volume density and dust temperature profiles for the prestellar cores B68 and L1689B using inverse-Abel transform based technique. We present intrinsic radial dust temperature profiles of starless cores directly from dust continuum emission maps disentangling the effect of temperature variations along the line of sight which was previously limited to the radiative transfer calculations. The reconstructed dust temperature profiles show a significant drop in core center, a flat inner part, and a rising outward trend until the background cloud temperature is reached. The central beam-averaged dust temperatures obtained for B68 and L1689B are 9.3 $\pm$ 0.5 K and 9.8 $\pm$0.5 K, respectively, which are lower than the temperatures of 11.3 K and 11.6 K obtained from direct SED fitting. The best mass estimates derived by integrating the volume density profiles of B68 and L1689B are 1.6 M_sol and 11 M_sol, respectively. Comparing our results for B68 with the near-infrared extinction studies, we find that the dust opacity law adopted by the HGBS project, $κ_λ =0.1(λ/300 μm)^{-2}$, agrees to within 50% with the dust extinction constraints

astro-ph.GA↗

arXiv2013

Herschel Reveals Massive Cold Clumps in NGC 7538

We present the first overview of the Herschel observations of the nearby high-mass star-forming region NGC 7538, taken as part of the Herschel imaging study of OB Young Stellar objects (HOBYS) Key Programme. These PACS and SPIRE maps cover an approximate area of one square degree at five submillimeter and far-infrared wavebands. We have identified 780 dense sources and classified 224 of those. With the intention of investigating the existence of cold massive starless or class 0-like clumps that would have the potential to form intermediate- to high-mass stars, we further isolate 13 clumps as the most likely candidates for followup studies. These 13 clumps have masses in excess of 40 M_sun and temperatures below 15 K. They range in size from 0.4 pc to 2.5 pc and have densities between 3x10^3 cm^-3 to 4x10^4 cm^-3. Spectral energy distributions are then used to characterize their energetics and evolutionary state through a luminosity-mass diagram. NGC 7538 has a highly filamentary structure, previously unseen in the dust continuum of existing submillimeter surveys. We report the most complete imaging to date of a large, evacuated ring of material in NGC 7538 which is bordered by many cool sources.

astro-ph.SR↗

arXiv2013

First results from the Herschel Gould Belt Survey in Taurus

The whole of the Taurus region (a total area of 52 sq. deg.) has been observed by the Herschel SPIRE and PACS instruments at wavelengths of 70, 160, 250, 350 and 500 μm as part of the Herschel Gould Belt Survey. In this paper we present the first results from the part of the Taurus region that includes the Barnard 18 and L1536 clouds. A new source-finding routine, the Cardiff Source-finding AlgoRithm (CSAR), is introduced, which is loosely based on CLUMPFIND, but that also generates a structure tree, or dendrogram, which can be used to interpret hierarchical clump structure in a complex region. Sources were extracted from the data using the hierarchical version of CSAR and plotted on a mass-size diagram. We found a hierarchy of objects with sizes in the range 0.024-2.7 pc. Previous studies showed that gravitationally bound prestellar cores and unbound starless clumps appeared in different places on the mass-size diagram. However, it was unclear whether this was due to a lack of instrumental dynamic range or whether they were actually two distinct populations. The excellent sensitivity of Herschel shows that our sources fill the gap in the mass-size plane between starless and pre-stellar cores, and gives the first clear supporting observational evidence for the theory that unbound clumps and (gravitationally bound) prestellar cores are all part of the same population, and hence presumably part of the same evolutionary sequence (c.f. Simpson et al. 2011).

astro-ph.GA↗

arXiv2013

What determines the density structure of molecular clouds ? A case study of Orion B with Herschel

A key parameter to the description of all star formation processes is the density structure of the gas. In this letter, we make use of probability distribution functions (PDFs) of Herschel column density maps of Orion B, Aquila, and Polaris, obtained with the Herschel Gould Belt survey (HGBS). We aim to understand which physical processes influence the PDF shape, and with which signatures. The PDFs of Orion B (Aquila) show a lognormal distribution for low column densities until Av 3 (6), and a power-law tail for high column densities, consistent with a rho r^-2 profile for the equivalent spherical density distribution. The PDF of Orion B is broadened by external compression due to the nearby OB stellar aggregates. The PDF of a quiescent subregion of the non-star-forming Polaris cloud is nearly lognormal, indicating that supersonic turbulence governs the density distribution. But we also observe a deviation from the lognormal shape at Av>1 for a subregion in Polaris that includes a prominent filament. We conclude that (i) the point where the PDF deviates from the lognormal form does not trace a universal Av-threshold for star formation, (ii) statistical density fluctuations, intermittency and magnetic fields can cause excess from the lognormal PDF at an early cloud formation stage, (iii) core formation and/or global collapse of filaments and a non-isothermal gas distribution lead to a power-law tail, and (iv) external compression broadens the column density PDF, consistent with numerical simulations.

astro-ph.GA↗

arXiv2013

The Herschel and JCMT Gould Belt Surveys: Constraining Dust Properties in the Perseus B1 Clump with PACS, SPIRE, and SCUBA-2

We present Herschel observations from the Herschel Gould Belt Survey and SCUBA-2 science verification observations from the JCMT Gould Belt Survey of the B1 clump in the Perseus molecular cloud. We determined the dust emissivity index using four different techniques to combine the Herschel PACS+SPIRE data at 160 - 500 microns with the SCUBA-2 data at 450 microns and 850 microns. Of our four techniques, we found the most robust method was to filter-out the large-scale emission in the Herschel bands to match the spatial scales recovered by the SCUBA-2 reduction pipeline. Using this method, we find beta ~ 2 towards the filament region and moderately dense material and lower beta values (beta > 1.6) towards the dense protostellar cores, possibly due to dust grain growth. We find that beta and temperature are more robust with the inclusion of the SCUBA-2 data, improving estimates from Herschel data alone by factors of ~ 2 for beta and by ~ 40% for temperature. Furthermore, we find core mass differences of < 30% compared to Herschel-only estimates with an adopted beta = 2, highlighting the necessity of long wavelength submillimeter data for deriving accurate masses of prestellar and protostellar cores.

astro-ph.GA↗

arXiv2012

The mid-infrared environments of 6.7 GHz Methanol Masers from the Methanol Multi-Beam Survey

We present a study of the mid-infrared environments and association with star formation tracers of 6.7 GHz methanol masers taken from the Methanol Multi-Beam (MMB) Survey. Our ultimate goal is to establish the mass of the host star and its evolutionary stage for each maser site. As a first step, the GLIMPSE survey of the Galactic Plane is utilised to investigate the environment of 776 methanol masers and we find that while the majority of the masers are associated with mid-infrared counterparts, a significant fraction (17%) are not associated with any detectable mid-infrared emission. A number of the maser counterparts are clearly extended with respect to the GLIMPSE point spread function and we implement an adaptive non-circular aperture photometry (ANCAP) technique to determine the fluxes of the maser counterparts. The ANCAP technique doubles the number of masers with flux information at all four wavelengths compared to the number of the corresponding counterparts obtained from the GLIMPSE Point Source Catalogue. The colours of the maser counterparts are found to be very similar to the smaller study carried out by Ellingsen (2006). The MMB masers are weakly associated with Extended Green Objects (EGOs) and Red MSX Survey (RMS) embedded sources (YSO and HII classifications) with 18% and 12% of masers associated with these objects respectively. The majority of MMB masers (60%) have detectable GLIMPSE infrared counterparts but have not been identified with previously recognised tracers of massive star formation; this confirms that the MMB survey has the potential to identify massive star forming regions independent of infrared selection.

astro-ph.SR↗

arXiv2012

Herschel view of the Taurus B211/3 filament and striations: Evidence of filamentary growth?

We present first results from the Herschel Gould Belt survey for the B211/L1495 region in the Taurus molecular cloud. Thanks to their high sensitivity and dynamic range, the Herschel images reveal the structure of the dense, star-forming filament B211 with unprecedented detail, along with the presence of striations perpendicular to the filament and generally oriented along the magnetic field direction as traced by optical polarization vectors. Based on the column density and dust temperature maps derived from the Herschel data, we find that the radial density profile of the B211 filament approaches a power-law behavior ρ {\propto} r^(-2.0{\pm}0.4) at large radii and that the temperature profile exhibits a marked drop at small radii. The observed density and temperature profiles of the B211 filament are in good agreement with a theoretical model of a cylindrical filament undergoing gravitational contraction with a polytropic equation of state: P {\propto} ρ^γ and T {\propto} ρ^(γ-1), with γ=0.97{\pm}0.01<1 (i.e. not strictly isothermal). The morphology of the column density map, where some of the perpendicular striations are apparently connected to the B211 filament, further suggests that the material may be accreting along the striations onto the main filament. The typical velocities expected for the infalling material in this picture are ~0.5-1 km/s, which are consistent with the existing kinematical constraints from previous CO observations.

astro-ph.SR↗

arXiv2012

Recent star formation in the Lupus clouds as seen by Herschel

We present a study of the star formation histories of the Lupus I, III, and IV clouds using the Herschel 70-500 micron maps obtained by the Herschel Gould Belt Survey Key Project. By combining the new Herschel data with the existing Spitzer catalog we obtained an unprecedented census of prestellar sources and young stellar objects in the Lupus clouds, which allowed us to study the overall star formation rate (SFR) and efficiency (SFE). The high SFE of Lupus III, its decreasing SFR, and its large number of pre-main sequence stars with respect to proto- and prestellar sources, suggest that Lupus III is the most evolved cloud, and after having experienced a major star formation event in the past, is now approaching the end of its current star-forming cycle. Lupus I is currently undergoing a large star formation event, apparent by the increasing SFR, the large number of prestellar objects with respect to more evolved objects, and the high percentage of material at high extinction (e.g., above A_V=8 mag). Also Lupus IV has an increasing SFR; however, the relative number of prestellar sources is much lower, suggesting that its star formation has not yet reached its peak.

astro-ph.GA↗

arXiv2012

The JCMT Gould Belt Survey: SCUBA-2 observations of radiative feedback in NGC1333

We present observations of NGC1333 from SCUBA-2 on JCMT, observed as a JCMT Gould Belt Survey pilot project during the shared risk campaign when the first of four arrays was installed at each of 450 and 850 microns. Temperature maps are derived from 450 micron and 850 micron ratios under the assumption of constant dust opacity spectral index beta=1.8. Temperatures indicate that the dust in the northern (IRAS 6/8) region of NGC1333 is hot, 20-40 K, due to heating by the B star SVS3, other young stars in the IR/optically visible cluster, and embedded protostars. Other luminous protostars are also identified by temperature rises at the 17" resolution of the ratio maps (0.02 pc assuming a distance of 250 pc for Perseus). The extensive heating raises the possibility that the radiative feedback may lead to increased masses for the next generation of stars.

astro-ph.GA↗

arXiv2012

Herschel observations of B1-bS and B1-bN: two first hydrostatic core candidates in the Perseus star-forming cloud

We report far-IR Herschel observations obtained between 70 $μ$m and 500 $μ$m of two star-forming dusty condensations, B1-bS and B1-bN, in the B1 region of the Perseus star-forming cloud. In the Western part of the Perseus cloud, B1-bS is the only source detected in all of the 6 PACS and SPIRE photometric bands without being visible in the Spitzer map at 24 $μ$m. B1-bN is clearly detected between 100 $μ$m and 250 $μ$m. We have fitted the spectral energy distributions of these sources to derive their physical properties, and find that a simple greybody model fails to reproduce the observed SEDs. At least a two-component model, consisting of a central source surrounded by a dusty envelope is required. The properties derived from the fit, however, suggest that the central source is not a Class 0 object. We then conclude that while B1-bS and B1-bN appear to be more evolved than a pre-stellar core, the best-fit models suggest that their central objects are younger than a Class 0 source. Hence, they may be good candidates to be examples of the first hydrostatic core phase. The projected distance between B1-bS and B1-bN is a few Jeans lengths. If their physical separation is close to this value, this pair would allow the mutual interactions between two forming stars at a very early stage of their evolution to be studied.

astro-ph.GA↗

arXiv2012

Profiling filaments: comparing near-infrared extinction and submillimetre data in TMC-1

Interstellar filaments are an important part of star formation. To understand the structure of filaments, cross-section profiles are often fitted with Plummer profiles. This profiling is often done with submm studies, such as Herschel. It would be convenient if filament properties could also be studied using groundbased NIR data. We compare the filament profiles obtained by NIR extinction and submm observations to find out if reliable profiles can be derived using NIR data. We use J-, H-, and K-band data of a filament north of TMC-1 to derive an extinction map from colour excesses of background stars. We compare the Plummer profiles obtained from extinction maps with Herschel dust emission maps. We present 2 methods to estimate profiles from NIR: Plummer profile fits to median Av of stars or directly to the Av of individual stars. We compare the methods by simulations. In simulations extinction maps and the new methods give correct results to within ~10-20 for modest densities. Direct fit to data on individual stars gives more accurate results than extinction map, and can work in higher density. In profile fits to real observations, values of Plummer parameters are generally similar to within a factor of ~2. Although parameter values can vary significantly, estimates of filament mass usually remain accurate to within some tens of per cent. Our results for TMC-1 are in agreement with earlier results. High resolution NIR data give more details, but 2MASS data can be used to estimate profiles. NIR extinction can be used as an alternative to submm observations to profile filaments. Direct fits of stars can also be a valuable tool. Plummer profile parameters are not always well constrained, and caution should be taken when making fits. In the evaluation of Plummer parameters, one can use the independence of dust emission and NIR data and the difference in the shapes of the confidence regions.

astro-ph.GA↗

arXiv2012

The spine of the swan: A Herschel study of the DR21 ridge and filaments in Cygnus X

In order to characterise the cloud structures responsible for the formation of high-mass stars, we present Herschel observations of the DR21 environment. Maps of the column density and dust temperature unveil the structure of the DR21 ridge and several connected filaments. The ridge has column densities larger than 1e23/cm^2 over a region of 2.3 pc^2. It shows substructured column density profiles and branching into two major filaments in the north. The masses in the studied filaments range between 130 and 1400 Msun whereas the mass in the ridge is 15000 Msun. The accretion of these filaments onto the DR21 ridge, suggested by a previous molecular line study, could provide a continuous mass inflow to the ridge. In contrast to the striations seen in e.g., the Taurus region, these filaments are gravitationally unstable and form cores and protostars. These cores formed in the filaments potentially fall into the ridge. Both inflow and collisions of cores could be important to drive the observed high-mass star formation. The evolutionary gradient of star formation running from DR21 in the south to the northern branching is traced by decreasing dust temperature. This evolution and the ridge structure can be explained by two main filamentary components of the ridge that merged first in the south.

astro-ph.GA↗

arXiv2012

Isolated starless cores in IRDCs in the Hi-GAL survey

In a previous paper we identified cores within infrared dark clouds (IRDCs). We regarded those without embedded sources as the least evolved, and labelled them starless. Here we identify the most isolated starless cores and model them using a three-dimensional, multi-wavelength, Monte Carlo, radiative transfer code. We derive the cores' physical parameters and discuss the relation between the mass, temperature, density, size and the surrounding interstellar radiation field (ISRF) for the cores. The masses of the cores were found not to correlate with their radial size or central density. The temperature at the surface of a core was seen to depend almost entirely on the level of the ISRF surrounding the core. No correlation was found between the temperature at the centre of a core and its local ISRF. This was seen to depend, instead, on the density and mass of the core.

astro-ph.GA↗

arXiv2012

Cluster-formation in the Rosette molecular cloud at the junctions of filaments

For many years feedback processes generated by OB-stars in molecular clouds, including expanding ionization fronts, stellar winds, or UV-radiation, have been proposed to trigger subsequent star formation. However, hydrodynamic models including radiation and gravity show that UV-illumination has little or no impact on the global dynamical evolution of the cloud. The Rosette molecular cloud, irradiated by the NGC2244 cluster, is a template region for triggered star-formation, and we investigated its spatial and density structure by applying a curvelet analysis, a filament-tracing algorithm (DisPerSE), and probability density functions (PDFs) on Herschel column density maps, obtained within the HOBYS key program. The analysis reveals not only the filamentary structure of the cloud but also that all known infrared clusters except one lie at junctions of filaments, as predicted by turbulence simulations. The PDFs of sub-regions in the cloud show systematic differences. The two UV-exposed regions have a double-peaked PDF we interprete as caused by shock compression. The deviations of the PDF from the log-normal shape typically associated with low- and high-mass star-forming regions at Av~3-4m and 8-10m, respectively, are found here within the very same cloud. This shows that there is no fundamental difference in the density structure of low- and high-mass star-forming regions. We conclude that star-formation in Rosette - and probably in high-mass star-forming clouds in general - is not globally triggered by the impact of UV-radiation. Moreover, star formation takes place in filaments that arose from the primordial turbulent structure built up during the formation of the cloud. Clusters form at filament mergers, but star formation can be locally induced in the direct interaction zone between an expanding HII--region and the molecular cloud.

astro-ph.GA↗

arXiv2012

The Pipe Nebula as seen with Herschel: Formation of filamentary structures by large-scale compression ?

A growing body of evidence indicates that the formation of filaments in interstellar clouds is a key component of the star formation process. In this paper, we present new Herschel PACS and SPIRE observations of the B59 and Stem regions in the Pipe Nebula complex, revealing a rich, organized network of filaments. The asymmetric column density profiles observed for several filaments, along with the bow-like edge of B59, indicates that the Pipe Nebula is being compressed from its western side, most likely by the winds from the nearby Sco OB2 association. We suggest that this compressive flow has contributed to the formation of some of the observed filamentary structures. In B59, the only region of the entire Pipe complex showing star formation activity, the same compressive flow has likely enhanced the initial column density of the clump, allowing it to become globally gravitationally unstable. Although more speculative, we propose that gravity has also been responsible for shaping the converging filamentary pattern observed in B59. While the question of the relative impact of large-scale compression and gravity remains open in B59, large-scale compression appears to be a plausible mechanism for the initial formation of filamentary structures in the rest of the complex

astro-ph.GA↗

arXiv2012

The JCMT Legacy Survey of the Gould Belt: mapping 13CO and C18O in Orion A

The Gould Belt Legacy Survey will map star-forming regions within 500 pc, using HARP (Heterodyne Array Receiver Programme), SCUBA-2 (Submillimetre Common-User Bolometer Array 2) and POL-2 (Polarimeter 2) on the James Clerk Maxwell Telescope (JCMT). This paper describes HARP observations of the J = 3-2 transitions of 13CO and C18O towards Orion A. The 1500-resolution observations cover 5 pc of the Orion filament, including OMC1 (inc. BN-KL and Orion Bar), OMC 2/3 and OMC 4, and allow a comparative study of the molecular gas properties throughout the star-forming cloud. The filament shows a velocity gradient of ~1 km/s /pc between OMC 1, 2 and 3, and high velocity emission is detected in both isotopologues. The Orion Nebula and Bar have the largest masses and line widths, and dominate the mass and energetics of the high velocity material. Compact, spatially resolved emission from CH3CN, 13CH3OH, SO, HCOOCH3, C2H5OH, CH3CHO and CH3OCHO is detected towards the Orion Hot Core. The cloud is warm, with a median excitation temperature of ~24 K; the Orion Bar has the highest excitation temperature gas, at >80 K. The C18O excitation temperature correlates well with the dust temperature (to within 40%). The C18O emission is optically thin, and the 13CO emission is marginally optically thick; despite its high mass, OMC 1 shows the lowest opacities. A virial analysis indicates that Orion A is too massive for thermal or turbulent support, but is consistent with a model of a filamentary cloud that is threaded by helical magnetic fields. The variation of physical conditions across the cloud is reflected in the physical characteristics of the dust cores....continued

astro-ph.GA↗

arXiv2012

The Herschel view of the on-going star formation in the Vela-C molecular cloud

As part of the Herschel guaranteed time key program 'HOBYS', we present the photometric survey of the star forming region Vela-C, one of the nearest sites of low-to-high-mass star formation in the Galactic plane. Vela-C has been observed with PACS and SPIRE in parallel mode between 70 um and 500 um over an area of about 3 square degrees. A photometric catalogue has been extracted from the detections in each band, using a threshold of 5 sigma over the local background. Out of this catalogue we have selected a robust sub-sample of 268 sources, of which 75% are cloud clumps and 25% are cores. Their Spectral Energy Distributions (SEDs) have been fitted with a modified black body function. We classify 48 sources as protostellar and 218 as starless. For two further sources, we do not provide a secure classification, but suggest they are Class 0 protostars. From SED fitting we have derived key physical parameters. Protostellar sources are in general warmer and more compact than starless sources. Both these evidences can be ascribed to the presence of an internal source(s) of moderate heating, which also causes a temperature gradient and hence a more peaked intensity distribution. Moreover, the reduced dimensions of protostellar sources may indicate that they will not fragment further. A virial analysis of the starless sources gives an upper limit of 90% for the sources gravitationally bound and therefore prestellar. We fit a power law N(logM) prop M^-1.1 to the linear portion of the mass distribution of prestellar sources. This is in between that typical of CO clumps and those of cores in nearby star-forming regions. We interpret this as a result of the inhomogeneity of our sample, which is composed of comparable fractions of clumps and cores.

astro-ph.SR↗

arXiv2012

Cores in Infra-Red Dark Clouds (IRDCs) seen in the Hi-GAL survey between l = 300° and l = 330°

We have used data taken as part of the Herschel infrared Galactic Plane survey (Hi-GAL) to study 3171 infrared-dark cloud (IRDC) candidates that were identified in the mid-infrared (8 μm) by Spitzer (we refer to these as 'Spitzer-dark' regions). They all lie in the range l=300 - 330 \circ and |b| 6 1 \circ. Of these, only 1205 were seen in emission in the far-infrared (250-500 μm) by Herschel (we call these 'Herschel-bright' clouds). It is predicted that a dense cloud will not only be seen in absorption in the mid-infrared, but will also be seen in emission in the far-infrared at the longest Herschel wavebands (250-500 μm). If a region is dark at all wavelengths throughout the mid-infrared and far-infrared, then it is most likely to be simply a region of lower background infrared emission (a 'hole in the sky'). Hence, it appears that previous surveys, based on Spitzer and other mid-infrared data alone, may have over-estimated the total IRDC population by a factor of 2. This has implications for estimates of the star formation rate in IRDCs in the Galaxy.We studied the 1205 Herschel-bright IRDCs at 250 μm, and found that 972 of them had at least one clearly defined 250-μm peak, indicating that they contained one or more dense cores. Of these, 653 (67 per cent) contained an 8-μm point source somewhere within the cloud, 149 (15 per cent) contained a 24-μm point source but no 8-μm source, and 170 (18 per cent) contained no 24-μm or 8-μm point sources. We use these statistics to make inferences about the lifetimes of the various evolutionary stages of IRDCs.

astro-ph.GA↗