arXiv subjects

Daniele Varsano

Publications and source records attributed to Daniele Varsano.

At least 19 recordsLinked to original sources

arXiv2026

Unified description of exciton, phonon and plasmon dispersions in 2D materials from an optical conductivity approximation

The modified Coulomb interaction in two-dimensional (2D) materials gives rise to unique, non-analytic low-momentum dispersions of excitons, phonons, and plasmons. Here, we describe the 2D dispersion of longitudinal excitations by introducing the optical conductivity approximation (OCA), a unified framework that evaluates the finite-q longitudinal response probed by electron energy-loss spectroscopy (q-EELS) by only using the q = 0 optical conductivity. By doing so, the approach demonstrates that the linear dispersion of all the above mentioned excitations is mainly due to the form of the 2D macroscopic Coulomb interaction rather than to the dispersion of the underlying band structure. Applying this approach to hexagonal boron nitride and graphene we accurately reproduce the energy and intensity dispersions of the hBN longitudinal-optical phonon and low-energy bright excitons, along with the graphene pi-plasmon. Our work also provides an efficient computational scheme to describe low momentum EELS data without the need to calculate the response functions at dense moment

cond-mat.mtrl-sci↗

arXiv2026

A viable and accurate route to GW simulations of metals and doped semiconductors

In this work we present an efficient and fully ab-initio approach for the calculation of the screened Coulomb potential, specifically designed for two dimensional (2D) and three dimensional (3D) metals and suitable to evaluate $GW$ corrections. While quasiparticle renormalization effects are typically negligible in bulk metals, 2D metals may exhibit semiconductor-like features, such as sizeable renormalization of quasiparticle energies induced by Coulomb interaction, which follow from the suppression of screening due to the reduced dimensionality, Although this effect can in principle be described by the $GW$ method, apart from a few pioneering exceptions, such calculations have been hampered by sampling requirements exceeding feasibility. We demonstrate that the combination of interpolation and extrapolation schemes together with the accounting of dynamical effects is pivotal to the correct handling of the intraband polarizability in the long wavelength limit. As an application, we report the gap renormalization of selected doped 2D-semiconductors in excellent agreement with ARPES measurements.

cond-mat.mtrl-sci↗

arXiv2026

Binding and spontaneous condensation of excitons in narrow-gap carbon nanotubes

Ultraclean, undoped carbon nanotubes are observed to be always insulating, even when the gap predicted by band theory is zero: the residual band gap is then thought to have a many-body origin. Here we theoretically show that the correlated insulator is excitonic in $all stable$ narrow-gap tubes irrespective of their size, thus extending our previous claim, limited to gapless (armchair) tubes [D.~Varsano, S.~Sorella, D.~Sangalli, M.~Barborini, S.~Corni, E.~Molinari, M.~Rontani, Nature Communications $\mathbf{8}$, 1461 (2017)]. We derive the scaling law of the exciton binding energy with the tube radius and chirality, and compute self-consistently the fundamental transport gap of the excitonic insulator, by enhancing the two-band model with an accurate treatment of screening validated from first principles. Our findings point to the broader connection between the exciton length scale, dictated by structure, and the stability of the excitonic phase.

cond-mat.mes-hall↗

arXiv2026

Stabilization of sliding ferroelectricity through exciton condensation

Sliding ferroelectricity is a phenomenon that arises from the insurgence of spontaneous electronic polarization perpendicular to the layers of two-dimensional (2D) systems upon the relative sliding of the atomic layer constituents. Because of the weak van der Waals (vdW) interactions between layers, sliding and the associated symmetry breaking can occur at low energy cost in materials such as transition-metal dichalcogenides. Here we discuss theoretically the origin and quantitative understanding of the phenomenon by focusing on a prototype structure, the WTe2 bilayer, where sliding ferroelectricity was first experimentally observed. We show that excitonic effects induce relevant energy band renormalizations in the ground state, and exciton condensation contributes significantly to stabilizing ferroelectricity upon sliding, beyond previous predictions that disregard electron-hole interaction effects. Enhanced excitonic effects in 2D and vdW sliding are general phenomena that point to sliding ferroelectricity as relevant for a broad class of important materials, where the intrinsic electric dipole can couple with other quantum phenomena and, in turn, an external electric field can control the quantum phases through ferroelectricity in unexplored ways.

cond-mat.mtrl-sci↗

arXiv2025

Influence of Interlayer Stacking on Optical Behavior in WSe$_{2}$/MoS$_{2}$ van der Waals Heterostructures

We investigate the impact of crystal alignment on excitonic behavior in WSe$_{2}$/MoS$_{2}$ van der Waals heterostructures by comparing eclipsed (AA) and staggered (AB) stacking configurations. Our first-principles and symmetry-based analysis reveal that interlayer stacking symmetry plays a central role in determining the nature of electron-hole pairs. We uncover a rich variety of excitonic states, including spatially confined two-dimensional (2D) excitons, delocalized three-dimensional (3D) excitons, and charge-transfer (CT) excitons with interlayer character. The dimensionality and optical activity of these excitons are governed by the interplay among orbital character, interlayer hybridization, and symmetry-imposed selection rules. Our findings establish general principles for engineering excitonic properties in van der Waals heterostructures through controlled layer orientation and stacking order.

cond-mat.str-el↗

arXiv2025

Excitonic effects in energy loss spectra of freestanding graphene

In this work we perform electron energy-loss spectroscopy (EELS) of freestanding graphene with high energy and momentum resolution to disentangle the quasielastic scattering from the excitation gap of Dirac electrons close to the optical limit. We show the importance of many-body effects on electronic excitations at finite transferred momentum by comparing measured EELS with ab initio calculations at increasing levels of theory. Quasi-particle corrections and excitonic effects are addressed within the GW approximation and Bethe-Salpeter equation, respectively. Both effects are essential in the description of the EEL spectra to obtain a quantitative agreement with experiments, with the position, dispersion, and shape of both the excitation gap and the $π$ plasmon being significantly affected by excitonic effects.

cond-mat.mtrl-sci↗

arXiv2023

Efficient GW calculations via the interpolation of the screened interaction in momentum and frequency space: The case of graphene

The GW self-energy may become computationally challenging to evaluate because of frequency and momentum convolutions. These difficulties were recently addressed by the development of the multipole approximation (MPA) and the W-av methods: MPA accurately approximates full-frequency response functions using a small number of poles, while W-av improves the convergence with respect to the k-point sampling in 2D materials. In this work we (i) present a theoretical scheme to combine them, and (ii) apply the newly developed approach to the paradigmatic case of graphene. Our findings show an excellent agreement of the calculated QP band structure with angle resolved photoemission spectroscopy (ARPES) data. Furthermore, the computational efficiency of MPA and W-av allows us to explore the logarithmic renormalization of the Dirac cone. To this aim, we develop an analytical model, derived from a Dirac Hamiltonian, that we parameterize using ab-initio data. The comparison of the models obtained with PPA and MPA results highlights an important role of the dynamical screening in the cone renormalization.

cond-mat.mtrl-sci↗

arXiv2023

Distinguishing different stackings in layered materials via luminescence spectroscopy

Despite its simple crystal structure, layered boron nitride features a surprisingly complex variety of phonon-assisted luminescence peaks. We present a combined experimental and theoretical study on ultraviolet-light emission in hexagonal and rhombohedral bulk boron nitride crystals. Emission spectra of high-quality samples are measured via cathodoluminescence spectroscopy, displaying characteristic differences between the two polytypes. These differences are explained using a fully first-principles computational technique that takes into account radiative emission from ``indirect'', finite-momentum, excitons via coupling to finite-momentum phonons. We show that the differences in peak positions, number of peaks and relative intensities can be qualitatively and quantitatively explained, once a full integration over all relevant momenta of excitons and phonons is performed.

cond-mat.mtrl-sci↗

arXiv2023

Quenching of low-energy optical absorption in bilayer C$_3$N polytypes

In this work we provide a first principles description of the electronic and optical properties of bilayers C$_3$N, with different stacking motifs AB, AB$'$ and AA$'$. Starting from quasi-particle electronic band-structures, we solve the Bethe Salpeter Equation (BSE) to access the excitonic properties of these bilayers. For all stacking sequences, we see strong optical absorption at energies lower than but close to that of the monolayer. Most relevant, we predict a strong quenching of the low-energy optical absorption, with negligible oscillator strength of low-lying bound excitons. This is a unique phenomenology that does not arise in the monolayer case, nor in other common homo-bilayers. We explain these findings in terms of the small interband dipole matrix elements associated to the valence-conduction transitions involved in these excitons, and discuss them in view of the different stacking motifs.

cond-mat.mtrl-sci↗

arXiv2023

Towards high-throughput many-body perturbation theory: efficient algorithms and automated workflows

The automation of ab initio simulations is essential in view of performing high-throughput (HT) computational screenings oriented to the discovery of novel materials with desired physical properties. In this work, we propose algorithms and implementations that are relevant to extend this approach beyond density functional theory (DFT), in order to automate many-body perturbation theory (MBPT) calculations. Notably, a novel algorithm pursuing the goal of an efficient and robust convergence procedure for GW and BSE simulations is provided, together with its implementation in a fully automated framework. This is accompanied by an automatic GW band interpolation scheme based on maximally-localized Wannier functions, aiming at a reduction of the computational burden of quasiparticle band structures while preserving high accuracy. The proposed developments are validated on a set of representative semiconductor and metallic systems.

cond-mat.mtrl-sci↗

arXiv2023

Efficient full frequency GW for metals using a multipole approach for the dielectric screening

The properties of metallic systems with important and structured excitations at low energies, such as Cu, are challenging to describe with simple models like the plasmon pole approximation (PPA), and more accurate and sometimes prohibitive full frequency approaches are usually required. In this paper we propose a numerical approach to $GW$ calculations on metals that takes into account the frequency dependence of the screening via the multipole approximation (MPA), an accurate and efficient alternative to current full-frequency methods that was recently developed and validated for semiconductors and overcomes several limitations of PPA. We now demonstrate that MPA can be successfully extended to metallic systems by optimizing the frequency sampling for this class of materials and introducing a simple method to include the $\mathbf{q}\to 0$ limit of the intra-band contributions. The good agreement between MPA and full frequency results for the calculations of quasi-particle energies, polarizability, self-energy and spectral functions in different metallic systems confirms the accuracy and computational efficiency of the method. Finally, we discuss the physical interpretation of the MPA poles through a comparison with experimental electron energy loss spectra for Cu.

cond-mat.mtrl-sci↗

arXiv2022

Graphene decoupling through oxygen intercalation on Gr/Co and Gr/Co/Ir interfaces

We perform a density functional theory study of the effects of oxygen adsorption on the structural and electronic properties of Gr/Co(0001) and Gr/Co/Ir(111) interfaces. In both interfaces, the graphene-Co distance increases with increasing O concentration. The oxygen intercalation effectively decreases the electronic interaction, preventing the hybridization of graphene states with Co $d$-orbitals, hence (partly) restoring the typical Dirac cone of pristine graphene. In the case of graphene/Co 1ML/Ir(111), which presents a moiré pattern, the interplay between the O distribution and the continuous change of the graphene-Co registry can be used to tune graphene corrugation and electronic properties. The computed electronic properties are in very good agreement with previously reported angle resolved photoemission spectroscopy and photoemission electron microscopy measurements for Gr/Co(0001).

cond-mat.mtrl-sci↗

arXiv2022

Efficient GW calculations in two dimensional materials through a stochastic integration of the screened potential

Many-body perturbation theory methods, such as the $G_0W_0$ approximation, are able to accurately predict quasiparticle (QP) properties of several classes of materials. However, the calculation of the QP band structure of two-dimensional (2D) semiconductors is known to require a very dense BZ sampling, due to the sharp $q$-dependence of the dielectric matrix in the long-wavelength limit ($\mathbf{q} \to 0$). In this work, we show how the convergence of the QP corrections of 2D semiconductors with respect to the BZ sampling can be drastically improved, by combining a Monte Carlo integration with an interpolation scheme able to represent the screened potential between the calculated grid points. The method has been validated by computing the band gap of three different prototype monolayer materials: a transition metal dichalcogenide (MoS$_2$), a wide band gap insulator (hBN) and an anisotropic semiconductor (phosphorene). The proposed scheme shows that the convergence of the gap for these three materials up to 50meV is achieved by using $\k$-point grids comparable to those needed by DFT calculations, while keeping the grid uniform.

cond-mat.mtrl-sci↗

arXiv2022

Excitonic effects in graphene-like C$_3$N

Monolayer C$_3$N is an emerging two-dimensional indirect band gap semiconductor with interesting mechanical, thermal, and electronic properties. In this work we present a description of C$_3$N electronic and dielectric properties, focusing on the so-called momentum-resolved exciton band structure. Excitation energies and oscillator strengths are computed in order to characterize bright and dark states, and discussed also with respect to the crystal symmetry. Activation of excitonic states is observed for finite transferred momenta: Indeed, we find an active indirect exciton at $\sim$ 0.9 eV, significantly lower than the direct optical gap of 1.96 eV, with excitonic binding energies in the range 0.6-0.9 eV for the lowest states. As for other 2D materials, we find a quasi-linear excitonic dispersion close to $Γ$, which however shows a downward convexity related to the indirect band gap of C$_3$N as well as to the dark nature of the involved excitons.

cond-mat.mes-hall↗

arXiv2022

Anomalous screening in narrow-gap carbon nanotubes

The screening of Coulomb interaction controls many-body physics in carbon nanotubes, as it tunes the range and strength of the force that acts on charge carriers and binds electron-hole pairs into excitons. In doped tubes, the effective Coulomb interaction drives the competition between Luttinger liquid and Wigner crystal, whereas in undoped narrow-gap tubes it dictates the Mott or excitonic nature of the correlated insulator observed at low temperature. Here, by computing the dielectric function of selected narrow- and zero-gap tubes from first principles, we show that the standard effective-mass model of screening systematically underestimates the interaction strength at long wavelength, hence missing the binding of low-energy excitons. The reason is that the model critically lacks the full three-dimensional topology of the tube, being adapted from graphene theory. As ab inito calculations are limited to small tubes, we develop a two-band model dielectric function based on the plane-wave expansion of Bloch states and the exact truncated Coulomb cutoff technique. We demonstrate that our -- computationally cheap -- approach provides the correct screening for narrow-gap tubes of any size and chirality. A striking result is that the screened interaction remains long-ranged even in gapless tubes, as an effect of the microscopic local fields generated by the electrons moving on the curved tube surface. As an application, we show that the effective electron-electron force that is felt at distances relevant to quantum transport experiments is super Coulombic.

cond-mat.mes-hall↗

arXiv2021

Non-adiabatic suppression of 3D excitonic screening in black phosphorus by mid-infrared pulses

The competition between the electron-hole Coulomb attraction and the three-dimensional dielectric screening dictates the optical properties of layered semiconductors. In low-dimensional materials, the equilibrium dielectric environment can be significantly altered by the ultrafast excitation of photo-carriers, leading to renormalized band gap and exciton binding energies. Recently, black phosphorus emerged as a 2D material with strongly layer-dependent electronic properties. Here, we resolve the coherent response of screening to sub-gap photo-excitation in bulk black phosphorus and find that mid-infrared pulses tuned across the band gap drive a transient non-thermal suppression of the dielectric screening, which is revealed by the emergence of the single-layer exciton resonance. Our work exposes the role of interlayer interactions in determining the electronic properties of 2D materials and discloses the possibility of optically manipulate them, which is of great relevance for the engineering of versatile van der Waals low-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2021

Evidence for equilibrium excitons and exciton condensation in monolayer WTe2

A single monolayer of the layered semimetal WTe2 behaves as a two-dimensional topological insulator, with helical conducting edge modes surrounding a bulk state that becomes insulating at low temperatures. Here we present evidence that the bulk state has a very unusual nature, containing electrons and holes bound by Coulomb attraction (excitons) that spontaneously form in thermal equilibrium. On cooling from room temperature to 100 K the conductivity develops a V-shaped dependence on electrostatic doping, while the chemical potential develops a ~43 meV step at the neutral point. These features are much sharper than is possible in an independent-electron picture, but they can be largely accounted for by positing that some of the electrons and holes are paired in equilibrium. Our calculations from first principles show that the exciton binding energy is larger than 100 meV and the radius as small as 4 nm, explaining their formation at high temperature and doping levels. Below 100 K more strongly insulating behavior is seen, suggesting that a charge-ordered state forms. The observed absence of charge density waves in this state appears surprising within an excitonic insulator picture, but we show that it can be explained by the symmetries of the exciton wave function. Monolayer WTe2 therefore presents an exceptional combination of topological properties and strong correlations over a wide temperature range.

cond-mat.str-el↗

arXiv2021

Frequency dependence in GW made simple using a multi-pole approximation

In the $GW$ approximation, the screened interaction $W$ is a non-local and dynamical potential that usually has a complex frequency dependence. A full description of such dependence is possible but often computationally demanding. For this reason, it is still common practice to approximate $W(ω)$ using a plasmon pole (PP) model. Such approach, however, may deliver an accuracy limited by its simplistic description of the frequency dependence of the polarizability, i.e. of $W$. In this work we explore a multi-pole approach (MPA) and develop an effective representation of the frequency dependence of $W$. We show that an appropriate sampling of the polarizability in the frequency complex plane and a multi-pole interpolation can lead to a level of accuracy comparable with full-frequency methods at much lower computational cost. Moreover, both accuracy and cost are controllable by the number of poles used in MPA. Eventually we validate the MPA approach in selected prototype systems, showing that full-frequency quality results can be obtained with a limited number of poles.

cond-mat.mtrl-sci↗