arXiv subjects

Daniele Varsano

Publications and source records attributed to Daniele Varsano.

At least 37 records · Page 2Linked to original sources

arXiv2021

Narrowing of d bands of FeCo layers intercalated under graphene

We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing Density Functional Theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphene film. At the same time, the FeCo intercalated layers induce a clear transition from a nearly undisturbed to a strongly hybridized graphene π-band, as measured by angle-resolved photoemission spectroscopy. A comparison of experimental results with the computed band structure and the projected density of states unveils a spin-selective hybridization between the π band of graphene and FeCo-3d states. Our results demonstrate that the reduced dimensionality, as well as the hybridization within the FeCo layers, induce a narrowing and a clear splitting of Fe 3d-up and Fe 3d-down spin bands of the confined FeCo layers with respect to bulk Fe and Co.

cond-mat.mtrl-sci↗

arXiv2021

Magnetic response and electronic states of well defined Graphene/Fe/Ir(111) heterostructure

We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr bands and Fe d states breaks the symmetry of the Dirac cone, with a downshift in energy of the apex by about 3 eV, and well-localized Fe intermixed states induced in the energy region just below the Fermi level. First principles electronic structure calculations show a large spin splitting of the Fe states, resulting in a majority spin channel almost fully occupied and strongly hybridized with Gr π states. X-ray magnetic circular dichroism on the Gr/Fe/Ir heterostructure reveals an ordered spin configuration with a ferromagnetic response of Fe layer(s), with enhanced spin and orbital configurations with respect to the bcc-Fe bulk values. The magnetization switches from a perpendicular easy magnetization axis when the Fe single layer is lattice matched with the Ir(111) surface to a parallel one when the Fe thin film is almost commensurate with graphene.

cond-mat.mtrl-sci↗

arXiv2020

Evidence of ideal excitonic insulator in bulk MoS2 under pressure

Spontaneous condensation of excitons is a long sought phenomenon analogous to the condensation of Cooper pairs in a superconductor. It is expected to occur in a semiconductor at thermodynamic equilibrium if the binding energy of the excitons---electron (e) and hole (h) pairs interacting by Coulomb force---overcomes the band gap, giving rise to a new phase: the 'excitonic insulator' (EI). Transition metal dichalcogenides are excellent candidates for the EI realization because of reduced Coulomb screening, and indeed a structural phase transition was observed in few-layer systems. However, previous work could not disentangle to which extent the origin of the transition was in the formation of bound excitons or in the softening of a phonon. Here we focus on bulk MoS2 and demonstrate theoretically that at high pressure it is prone to the condensation of genuine excitons of finite momentum, whereas the phonon dispersion remains regular. Starting from first-principles many-body perturbation theory, we also predict that the self-consistent electronic charge density of the EI sustains an out-of-plane permanent electric dipole moment with an antiferroelectric texture in the layer plane: At the onset of the EI phase, those optical phonons that share the exciton momentum provide a unique Raman fingerprint for the EI formation. Finally, we identify such fingerprint in a Raman feature that was previously observed experimentally, thus providing direct spectroscopic confirmation of an ideal excitonic insulator phase in bulk MoS2 above 30 GPa.

cond-mat.str-el↗

arXiv2019

Electronic and optical properties of doped TiO2 by many-body perturbation theory

Doping is one of the most common strategies for improving the photocatalytic and solar energy conversion properties of TiO$_2$, hence an accurate theoretical description of the electronic and optical properties of doped TiO$_2$ is of both scientific and practical interest. In this work we use many-body perturbation theory techniques to investigate two typical n-type dopants, Niobium and Hydrogen, in TiO$_2$ rutile. Using the GW approximation to determine band edges and defect energy levels, and the Bethe Salpeter equation for the calculation of the absorption spectra, we find that the defect energy levels form non-dispersive bands %associated with localized states lying $\simeq 2.2 eV$ above the top of the corresponding valence bands ($\simeq 0.9 eV$ below the conduction bands of the {\it pristine} material). The defect states are also responsible for the appearance of low energy absorption peaks that enhance the solar spectrum absorption of rutile. The spatial distributions of the excitonic wavefunctions associated with these low energy excitations are very different for the two dopants, suggesting a larger mobility of photoexcited electrons in Nb-TiO$_2$.

cond-mat.mtrl-sci↗

arXiv2019

Intrinsic edge excitons in two-dimensional MoS$_2$

Using accurate first-principles calculations based on many-body perturbation theory we predict that two-dimensional MoS$_2$ hosts edge excitons with universal character, intrinsic to the existence of edges and lying well below the onset of bulk features. These excitons are largely insensitive to edge terminations or orientation, persisting even in the presence of metallic screening at zigzag edges, with large binding energies of $\sim$0.4 eV. Additional excitons can also emerge in ultranarrow ribbons, or as a function of the chemical nature of the termination. The chemical, structural, and electronic similarities with Se- or W-based transition-metal dichalcogenides suggest that these optical features could be common in this class of materials.

cond-mat.mes-hall↗

arXiv2019

A monolayer transition metal dichalcogenide as a topological excitonic insulator

Monolayer transition metal dichalcogenides in the T' phase promise to realize the quantum spin Hall (QSH) effect at room temperature, because they exhibit a prominent spin-orbit gap between inverted bands in the bulk. Here we show that the binding energy of electron-hole pairs excited through this gap is larger than the gap itself in MoS2, a paradigmatic material that we investigate from first principles by many-body perturbation theory (MBPT). This paradoxical result hints at the instability of the T' phase against the spontaneous generation of excitons, and indeed we find that it gives rise to a recostructed `excitonic insulator' ground state. Importantly, we show that in this system topological and excitonic order cooperatively enhance the bulk gap by breaking the crystal inversion symmetry, in contrast to the case of bilayers where the frustration between the two orders is relieved by breaking time reversal symmetry. The excitonic topological insulator departs distinctively from the bare topological phase as it lifts the band spin degeneracy, which results in circular dichroism. A moderate biaxial strain applied to the system leads to two additional excitonic phases, different in their topological character but both ferroelectric as an effect of electron-electron interactions.

cond-mat.mes-hall↗

arXiv2019

Quantifying the Plasmonic Character of Optical Excitations in a Molecular J-Aggregate

The definition of plasmon at the microscopic scale is far from being understood. Yet, it is very important to recognize plasmonic features in optical excitations, as they can inspire new applications and trigger new discoveries by analogy with the rich phenomenology of metal nanoparticle plasmons. Recently, the concepts of plasmonicity index and the generalized plasmonicity index (GPI) have been devised as computational tools to quantify the plasmonic nature of optical excitations. The question may arise whether any strong absorption band, possibly with some sort of collective character in its microscopic origin, shares the status of plasmon. Here we demonstrate that this is not always the case, by considering a well-known class of systems represented by J-aggregates molecular crystals, characterized by the intense J band of absorption. By means of first-principles simulations, based on a many-body perturbation theory formalism, we investigate the optical properties of a J-aggregate made of push-pull organic dyes. We show that the effect of aggregation is to lower the GPI associated with the J-band with respect to the isolated dye one, which corresponds to a nonplasmonic character of the electronic excitations. In order to rationalize our finding, we then propose a simplified one-dimensional theoretical model of the J-aggregate. A useful microscopic picture of what discriminates a collective molecular crystal excitation from a plasmon is eventually obtained.

cond-mat.mtrl-sci↗

arXiv2019

Interplay between Intra- and Intermolecular Charge Transfer in the Optical Excitations of J-Aggregates

In a first-principles study based on density functional theory and many-body perturbation theory, we address the interplay between intra- and intermolecular interactions in a J-aggregate formed by push-pull organic dyes by investigating its electronic and optical properties. We find that the most intense excitation dominating the spectral onset of the aggregate, i.e., the J-band, exhibits a combination of intramolecular charge transfer, coming from the push-pull character of the constituting dyes, and intermolecular charge transfer, due to the dense molecular packing. We also show the presence of a pure intermolecular charge-transfer excitation within the J-band, which is expected to play a relevant role in the emission properties of the J-aggregate. Our results shed light on the microscopic character of optical excitations of J-aggregates and offer new perspectives to further understand the nature of collective excitations in organic semiconductors.

cond-mat.mtrl-sci↗

arXiv2019

Reproducibility in $G_0W_0$ Calculations for Solids

Ab initio many-body perturbation theory within the $GW$ approximation is a Green's function formalism widely used in the calculation of quasiparticle excitation energies of solids. In what has become an increasingly standard approach, Kohn-Sham eigenenergies, generated from a DFT calculation with a strategically-chosen exchange correlation functional ``starting point'', are used to construct $G$ and $W$, and then perturbatively corrected by the resultant $GW$ self-energy. In practice, there are several ways to construct the $GW$ self-energy, and these can lead to variations in predicted quasiparticle energies. For example, for ZnO and TiO$_2$, reported $GW$ fundamental gaps can vary by more than 1 eV. In this work, we address the convergence and key approximations in contemporary $G_0W_0$ calculations, including frequency-integration schemes and the treatment of the Coulomb divergence in the exact-exchange term. We study several systems,and compare three different $GW$ codes: BerkeleyGW, Abinit and Yambo. We demonstrate, for the first time, that the same quasiparticle energies for systems in the condensed phase can be obtained with different codes, and we provide a comprehensive assessment of implementations of the $GW$ approximation.

cond-mat.mtrl-sci↗

arXiv2018

Ferromagnetic and Antiferromagnetic Coupling of Spin Molecular Interfaces with High Thermal Stability

We report an advanced organic spin-interface architecture with magnetic remanence at room temperature, constituted by metal phthalocyanine molecules magnetically coupled with Co layer(s), mediated by graphene. Fe- and Cu-phthalocyanines assembled on graphene/Co have identical structural configurations, but FePc couples antiferromagnetically with Co up to room temperature, while CuPc couples ferromagnetically with weaker coupling and thermal stability, as deduced by element-selective X-ray magnetic circular dichroic signals. The robust antiferromagnetic coupling is stabilized by a superexchange interaction, driven by the out-of-plane molecular orbitals responsible of the magnetic ground state and electronically decoupled from the underlying metal via the graphene layer, as confirmed by ab initio theoretical predictions. These archetypal spin interfaces can be prototypes to demonstrate how antiferromagnetic and/or ferromagnetic coupling can be optimized by selecting the molecular orbital symmetry.

cond-mat.mtrl-sci↗

arXiv2018

Interaction-driven giant orbital magnetic moments in carbon nanotubes

Carbon nanotubes continue to be model systems for studies of confinement and interactions. This is particularly true in the case of so-called "ultra-clean" carbon nanotube devices offering the study of quantum dots with extremely low disorder. The quality of such systems, however, has increasingly revealed glaring discrepancies between experiment and theory. Here we address the outstanding anomaly of exceptionally large orbital magnetic moments in carbon nanotube quantum dots. We perform low temperature magneto-transport measurements of the orbital magnetic moment and find it is up to seven times larger than expected from the conventional semiclassical model. Moreover, the magnitude of the magnetic moment monotonically drops with the addition of each electron to the quantum dot directly contradicting the widely accepted shell filling picture of single-particle levels. We carry out quasiparticle calculations, both from first principles and within the effective-mass approximation, and find the giant magnetic moments can only be captured by considering a self-energy correction to the electronic band structure due to electron-electron interactions.

cond-mat.mes-hall↗

arXiv2018

Role of Quantum-Confinement in Anatase Nanosheets

Despite most of the applications of anatase nanostructures rely on photoexcited charge processes, yet profound theoretical understanding of fundamental related properties is lacking. Here, by means of ab initio ground and excited-state calculations, we reveal, in an unambiguous way, the role of quantum confinement effect and of the surface orientation, on the electronic and optical properties of anatase nanosheets (NSs). The presence of bound excitons extremely localized along the (001) direction, whose existence has been recently proven also in anatase bulk, explains the different optical behavior found for the two orientations (001) and (101) when the NS thickness increases. We suggest also that the almost two-dimensional nature of these excitons can be related to the improved photoconversion efficiency observed when a high percentage of (001) facet is present in anatase nanocrystals.

cond-mat.mtrl-sci↗

arXiv2018

Theoretical S1 <- S0 absorption energies of the anionic forms of oxyluciferin by Variational Monte Carlo and Many Body Green's Function Theory

The structures of three negatively charged forms (anionic keto-1 and enol-1, dianonic enol-2) of oxyluciferin (OxyLuc), which are the most probable emitters responsible for the firefly bioluminescence, have been fully relaxed at the variational Monte Carlo (VMC) level. Absorption energies of the S1<-S0 vertical transition have been computed using different levels of theory, such as TDDFT, CC2 and many body Green's function Theory (MBGFT). The use of MBGFT, by means of the Bethe-Salpeter (BS) formalism, on VMC structures provides results in excellent agreement with the value (2.26(8) eV) obtained by action spectroscopy experiments for the keto-1 form (2.32 eV). To unravel the role of the quality of the optimized ground state geometry, BS excitation energies have also been computed on CASSCF geometries, inducing a non negligible blue shift (0.08 and 0.07 eV for keto-1 and enol-1 forms, respectively) with respect to the VMC ones. Structural effects have been analyzed in terms of over- or under-correlation along the conjugated bonds of OxyLuc by using different methods for the ground-state optimization. The relative stability of the S$_1$ state for the keto-1 and enol-1 forms depends on the method chosen for the excited state calculation, thus representing a fundamental caveat for any theoretical study on these systems. Finally, Kohn-Sham HOMO and LUMO orbitals of enol-2 are (nearly) bound only when the dianion is embedded into a solvent (water and toluene in the present work); excited state calculations are therefore meaningful only in presence of a dielectric medium which localizes the electronic density. The combination of VMC for the ground state geometry and BS formalism for the absorption spectra clearly outperforms standard TDDFT and quantum chemistry approaches.

physics.chem-ph↗

arXiv2018

Bonds, lone pairs, and shells probed by means of on-top dynamical correlations

The Electron Localization Function (ELF) by Becke and Edgecombe [J. Chem. Phys. {\bf 92}, 5397 (1990)] is routinely adopted as a descriptor of atomic shells and covalent bonds. Since the ELF and its related quantities find useful exploitation also in the construction of modern density functionals, the interest in complementing the ELF is linked to both the quests of improving electronic structure descriptors and density functional approximations. The ELF uses information which is available by considering parallel-spin electron pairs in single-reference many-body states. In this work, we complement this construction with information obtained by considering antiparallel-spin pairs whose short-range correlations are modeled by a density functional approximation. As a result, the approach requires only a contained computational effort. Applications to a variety of systems show that, in this way, we gain a spatial description of the bond in H$_2$ (which is not available with the ELF) together with some trends not optimally captured by the ELF in other prototypical situations.

cond-mat.mtrl-sci↗

arXiv2018

FePc Adsorption on the Moiré Superstructure of Graphene Intercalated with a Co Layer

The moiré superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moiré pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moiré superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface.

cond-mat.mtrl-sci↗

arXiv2017

Carbon nanotubes as excitonic insulators

Fifty years ago Walter Kohn speculated that a zero-gap semiconductor might be unstable against the spontaneous generation of excitons---electron-hole pairs bound together by Coulomb attraction. The reconstructed ground state would then open a gap breaking the symmetry of the underlying lattice, a genuine consequence of electronic correlations. Here we show that this excitonic insulator is realized in zero-gap carbon nanotubes by performing first-principles calculations through many-body perturbation theory as well as quantum Monte Carlo. The excitonic order modulates the charge between the two carbon sublattices opening an experimentally observable gap, which scales as the inverse of the tube radius and weakly depends on the axial magnetic field. Our findings call into question the Luttinger liquid paradigm for nanotubes and provide tests to experimentally discriminate between excitonic and Mott insulator.

cond-mat.mes-hall↗

arXiv2017

Breathing bands due to molecular order in CH3NH3PbI3

CH3NH3PbI3 perovskite is nowadays amongst the most promising photovoltaic materials for energy conversion. We have studied by ab-initio calculations, using several levels of approximation - namely density functional theory including spin-orbit coupling and quasi-particle corrections by means of the GW method, as well as pseudopotential self-interaction corrections -, the role of the methylammonium orientation on the electronic structure of this perovskite. We have considered many molecular arrangements within 2x2x2 supercells, showing that the relative orientation of the organic molecules is responsible for a huge band gap variation up to 2 eV. The band gap sizes are related to distortions of the PbI3 cage, which are in turn due to electrostatic interactions between this inorganic frame and the molecules. The strong dependence of the band gap on the mutual molecular orientation is confirmed at all levels of approximations. Our results suggest then that the coupling between the molecular motion and the interactions of the molecules with the inorganic cage could help to explain the widening of the absorption spectrum of CH3NH3PbI3 perovskite, consistent with the observed white spectrum.

cond-mat.mtrl-sci↗

arXiv2017

Electronic Structure Evolution during the Growth of Graphene Nanoribbons on Au(110)

Surface-assisted polymerization of molecular monomers into extended chains can be used as the seed of graphene nanoribbon (GNR) formation, resulting from a subsequent cyclo-dehydrogenation process. By means of valence-band photoemission and ab-initio density-functional theory (DFT) calculations, we investigate the evolution of molecular states from monomer 10,10'-dibromo-9,9'bianthracene (DBBA) precursors to polyanthryl polymers, and eventually to GNRs, as driven by the Au(110) surface. The molecular orbitals and the energy level alignment at the metal-organic interface are studied in depth for the DBBA precursors deposited at room temperature. On this basis, we can identify a spectral fingerprint of C-Au interaction in both DBBA single-layer and polymerized chains obtained upon heating. Furthermore, DFT calculations help us evidencing that GNRs interact more strongly than DBBA and polyanthryl with the Au(110) substrate, as a result of their flatter conformation.

cond-mat.mtrl-sci↗