arXiv subjects

Danielle Braje

Publications and source records attributed to Danielle Braje.

15 recordsLinked to original sources

arXiv2026

An Integrated Ultralow Noise Spiral Interferometric Laser

Photonic integration offers the potential to bring complex high-performance optical systems to the form factor of a compact semiconductor chip. However, the range of system functions accessible critically depends on the extent to which free-space and fiber components can be made integrable. The ultralow-expansion cavity-stabilized laser$-$often used in precision metrology, high-resolution sensors, and advanced systems in atomic physics$-$is one component that currently has no direct parallel on chip. Lasers stabilized to photonically-integrated resonators exist, but exhibit considerably higher frequency noise and are accompanied by large levels of frequency drift. We demonstrate here a new architecture for an ultranarrow linewidth integrated laser based on stabilization to a sinusoidal fringe of an interferometer having a long 25-m unbalanced delay line. Our interferometric laser not only advances the state-of-the-art for on-chip lasers, but we in addition introduce an amplitude locking scheme that greatly suppresses the laser's long-term frequency wander. We achieve a record on-chip fractional frequency noise of $5.6 \times 10^{-14}$, corresponding to a linewidth of 12 Hz centered at 1348 nm. To showcase the utility of this laser, we divide the optical carrier to microwave frequencies, demonstrating the ability to outperform state-of-the-art quartz crystal oscillators by 15 dB or more.

physics.optics↗

arXiv2025

Vector magnetometry using cavity-enhanced microwave readout in nitrogen-vacancy diamond

We demonstrate $4\pi$-steradian vector magnetic field sensing using an ensemble of nitrogen-vacancy (NV) centers in a single-crystal diamond coupled to a microwave (MW) cavity. The MW cavity enhances the spin-photon coupling which enables efficient, high-contrast spin-state readout via MW interrogation and removes the need for bulky optical collection components. An applied AC bias magnetic field lifts the zero-field degeneracy of the four crystallographic NV orientations, allowing each orientation to be individually addressed and used for vector reconstruction of the magnetic field. The resulting magnetometer has a 40\% contrast (20x higher than typical for optical spin-ensemble readout) and achieves a single-axis sensitivity of 250 pT/$\sqrt{\mathrm{Hz}}$ which is flat from DC to 1 kHz. Noise models of the composite spin-cavity system establish MW amplitude noise as the dominant noise source and predict a thermal noise limit of 2 pT/$\sqrt{\mathrm{Hz}}$.

quant-ph↗

arXiv2024

Optical Atomic Clock Interrogation Via an Integrated Spiral Cavity Laser

Optical atomic clocks have demonstrated revolutionary advances in precision timekeeping, but their applicability to the real world is critically dependent on whether such clocks can operate outside a laboratory setting. The challenge to clock portability stems from the many obstacles not only in miniaturizing the underlying components of the clock $-$ namely the ultrastable laser, the frequency comb, and the atomic reference itself $-$ but also in making the clock resilient to environmental fluctuations. Photonic integration offers one compelling solution to simultaneously address the problems of miniaturization and ruggedization, but brings with it a new set of challenges in recreating the functionality of an optical clock using chip-scale building blocks. The clock laser used for atom interrogation is one particular point of uncertainty, as the performance of the meticulously-engineered bulk-cavity stabilized lasers would be exceptionally difficult to transfer to chip. Here we demonstrate that a chip-integrated ultrahigh quality factor (Q) spiral cavity, when interfaced with a 1348 nm seed laser, reaches a fractional frequency instability of $7.5 \times 10^{-14}$, meeting the stability requirements for interrogating the narrow-linewidth transition of $^{88}$Sr$^+$ upon frequency doubling to 674 nm. In addition to achieving the record for laser stability on chip, we use this laser to showcase the operation of a Sr-ion clock with short-term instability averaging down as $3.9 \times 10^{-14} / \sqrtτ$, where $τ$ is the averaging time. Our demonstration of an optical atomic clock interrogated by an integrated spiral cavity laser opens the door for future advanced clock systems to be entirely constructed using lightweight, portable, and mass-manufacturable integrated optics and electronics.

physics.atom-ph↗

arXiv2022

Large-scale optical characterization of solid-state quantum emitters

Solid-state quantum emitters have emerged as a leading quantum memory for quantum networking applications. However, standard optical characterization techniques are neither efficient nor repeatable at scale. In this work, we introduce and demonstrate spectroscopic techniques that enable large-scale, automated characterization of color centers. We first demonstrate the ability to track color centers by registering them to a fabricated machine-readable global coordinate system, enabling systematic comparison of the same color center sites over many experiments. We then implement resonant photoluminescence excitation in a widefield cryogenic microscope to parallelize resonant spectroscopy, achieving two orders of magnitude speed-up over confocal microscopy. Finally, we demonstrate automated chip-scale characterization of color centers and devices at room temperature, imaging thousands of microscope fields of view. These tools will enable accelerated identification of useful quantum emitters at chip-scale, enabling advances in scaling up color center platforms for quantum information applications, materials science, and device design and characterization.

quant-ph↗

arXiv2022

An integrated photonic engine for programmable atomic control

Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to the application of arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, these material platforms for high-speed telecom integrated photonics are not transparent at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic architecture for multi-channel quantum control using integrated, visible-light modulators based on thin-film lithium niobate. Our approach combines techniques in free-space optics, holography, and control theory together with a sixteen-channel integrated photonic device to stabilize temporal and cross-channel power deviations and enable precise and uniform control. Applying this device to a homogeneous constellation of silicon-vacancy artificial atoms in diamond, we present techniques to spatially and spectrally address a dynamically-selectable set of these stochastically-positioned point emitters. We anticipate that this scalable and reconfigurable optical architecture will lead to systems that could enable parallel individual programmability of large many-body atomic systems, which is a critical step towards universal quantum computation on such hardware.

quant-ph↗

arXiv2022

High-Fidelity Ion State Detection Using Trap-Integrated Avalanche Photodiodes

Integrated technologies greatly enhance the prospects for practical quantum information processing and sensing devices based on trapped ions. High-speed and high-fidelity ion state readout is critical for any such application. Integrated detectors offer significant advantages for system portability and can also greatly facilitate parallel operations if a separate detector can be incorporated at each ion-trapping location. Here we demonstrate ion quantum state detection at room temperature utilizing single-photon avalanche diodes (SPADs) integrated directly into the substrate of silicon ion trapping chips. We detect the state of a trapped $^{88}\text{Sr}^{+}$ ion via fluorescence collection with the SPAD, achieving $99.92(1)\%$ average fidelity in 450 $μ$s, opening the door to the application of integrated state detection to quantum computing and sensing utilizing arrays of trapped ions.

quant-ph↗

arXiv2021

Cooling of an Integrated Brillouin Laser below the Thermal Limit

Photonically integrated resonators are promising as a platform for enabling ultranarrow linewidth lasers in a compact form factor. Owing to their small size, these integrated resonators suffer from thermal noise that limits the frequency stability of the optical mode to ~100 kHz. Here, we demonstrate an integrated stimulated Brillouin scattering (SBS) laser based on a large mode-volume annulus resonator that realizes an ultranarrow thermal-noise-limited linewidth of 270 Hz. In practice, yet narrower linewidths are required before integrated lasers can be truly useful for applications such as optical atomic clocks, quantum computing, gravitational wave detection, and precision spectroscopy. To this end, we employ a thermorefractive noise suppression technique utilizing an auxiliary laser to reduce our SBS laser linewidth to 70 Hz. This demonstration showcases the possibility of stabilizing the thermal motion of even the narrowest linewidth chip lasers to below 100 Hz, thereby opening the door to making integrated microresonators practical for the most demanding future scientific endeavors.

physics.optics↗

arXiv2021

Thermally-Polarized Solid-State Spin Sensor

Quantum sensors based on spin defect ensembles have seen rapid development in recent years, with a wide array of target applications. Historically, these sensors have used optical methods to prepare or read out quantum states. However, these methods are limited to optically-polarizable spin defects, and the spin ensemble size is typically limited by the available optical power or acceptable optical heat load. We demonstrate a solid-state sensor employing a non-optical state preparation technique, which harnesses thermal population imbalances induced by the defect's zero-field splitting. Readout is performed using the recently-demonstrated microwave cavity readout technique, resulting in a sensor architecture that is entirely non-optical and broadly applicable to all solid-state paramagnetic defects with a zero-field splitting. The implementation in this work uses Cr$^{3+}$ defects in a sapphire (Al$_2$O$_3$) crystal and a simple microwave architecture where the host crystal also serves as the high quality-factor resonator. This approach yields a near-unity filling factor and high single-spin-photon coupling, producing a magnetometer with a broadband sensitivity of 9.7 pT/$\sqrt{\text{Hz}}$.

quant-ph↗

arXiv2020

A Brillouin Laser Optical Atomic Clock

Over the last decade, optical atomic clocks have surpassed their microwave counterparts and now offer the ability to measure time with an increase in precision of two orders of magnitude or more. This performance increase is compelling not only for enabling new science, such as geodetic measurements of the earth, searches for dark matter, and investigations into possible long-term variations of fundamental physics constants but also for revolutionizing existing technology, such as the global positioning system (GPS). A significant remaining challenge is to transition these optical clocks to non-laboratory environments, which requires the ruggedization and miniaturization of the atomic reference and clock laser along with their supporting lasers and electronics. Here, using a compact stimulated Brillouin scattering (SBS) laser to interrogate a $^8$$^8$Sr$^+$ ion, we demonstrate a promising component of a portable optical atomic clock architecture. In order to bring the stability of the SBS laser to a level suitable for clock operation, we utilize a self-referencing technique to compensate for temperature drift of the laser to within $170$ nK. Our SBS optical clock achieves a short-term stability of $3.9 \times 10^{-14}$ at $1$ s---an order of magnitude improvement over state-of-the-art microwave clocks. Based on this technology, a future GPS employing portable SBS clocks offers the potential for distance measurements with a 100-fold increase in resolution.

physics.optics↗

arXiv2019

Photoluminescence decomposition analysis: a technique to characterize NV creation in diamond

Treatment of lab-grown diamond by electron irradiation and annealing has enabled quantum sensors based on negatively-charged nitrogen-vacancy (NV$^\text{-}$) centers to demonstrate record sensitivities. \cite{Clevenson2015,Wolf2015,Barry2016,Chatzidrosos2017}. Here we investigate the irradiation and annealing process applied to 28 diamond samples using a new ambient-temperature, all-optical approach. As the presence of the neutrally-charged nitrogen-vacancy (NV$^\text{0}$) center is deleterious to sensor performance, this photoluminescence decomposition analysis (PDA) is first employed to determine the concentration ratio of NV$^\text{-}$ to NV$^0$ in diamond samples from the measured photoluminescence spectrum. The analysis hinges on (i) isolating each NV charge state's emission spectrum and (ii) measuring the NV$^\text{-}$ to NV$^0$ emission ratio, which is found to be 2.5$\pm$0.5 under low-intensity 532 nm illumination. Using the PDA method, we measure the effects of irradiation and annealing on conversion of substitutional nitrogen to NV centers. Combining these measurements with a phenomenological model for diamond irradiation and annealing, we extract an estimated monovacancy creation rate of $0.52\pm 0.26$ cm$^{\text{-1}}$ for 1 MeV electron irradiation and an estimated monovacancy diffusion coefficient of 1.8 nm$^2$/s at 850~$^\circ$C. Finally we find that irradiation doses $\gtrsim 10^{18}$ e$^\text{-}$/cm$^2$ deteriorate the NV$^\text{-}$ decoherence time $T_2$ whereas $T_1$ is unaffected up to the the maximum investigated dose of $5\times 10^{18}$ e$^\text{-}$/cm$^2$.

cond-mat.mes-hall↗

arXiv2018

Broadband loop gap resonator for nitrogen vacancy centers in diamond

We present an S-band tunable loop gap resonator (LGR) providing strong, homogeneous, and directionally uniform broadband microwave (MW) drive for nitrogen-vacancy (NV) ensembles. With 42 dBm of input power, the composite device provides drive field amplitudes approaching 5 G over a circular area $\gtrsim\!50$ mm$^2$ or cylindrical volume $\gtrsim\!250$ mm$^3$. The wide 80 MHz device bandwidth allows driving all eight NV Zeeman resonances for bias magnetic fields below 20 G. For pulsed applications the device realizes percent-scale microwave drive inhomogeneity; we measure a fractional root-mean-square inhomogeneity $σ_\text{rms}\!=\! 1.6\%$ and a peak-to-peak variation $σ_\text{pp}\!=\! 3\%$ over a circular area of 11 mm$^2$, and $σ_\text{rms} \!=\! 3.2\%$ and $σ_\text{pp}\! =\! 10.5\%$ over a larger 32 mm$^2$ circular area. We demonstrate incident MW power coupling to the LGR using multiple methodologies: a PCB-fabricated exciter antenna for deployed compact bulk sensors and an inductive coupling coil suitable for microscope-style imaging. The inductive coupling coil allows for approximately $2π$ steradian combined optical access above and below the device, ideal for envisioned and existing NV imaging and bulk sensing applications.

physics.app-ph↗

arXiv2018

Robust High-Dynamic-Range Vector Magnetometry via Nitrogen-Vacancy Centers in Diamond

We demonstrate a robust, scale-factor-free vector magnetometer, which uses a closed-loop frequency-locking scheme to simultaneously track Zeeman-split resonance pairs of nitrogen-vacancy (NV) centers in diamond. Compared with open-loop methodologies, this technique is robust against fluctuations in temperature, resonance linewidth, and contrast; offers a three-order-of-magnitude increase in dynamic range; and allows for simultaneous interrogation of multiple transition frequencies. By directly detecting the resonance frequencies of NV centers aligned along each of the diamond's four tetrahedral crystallographic axes, we perform full vector reconstruction of an applied magnetic field.

quant-ph↗

arXiv2017

Analysis and mitigation of interface losses in trenched superconducting coplanar waveguide resonators

Improving the performance of superconducting qubits and resonators generally results from a combination of materials and fabrication process improvements and design modifications that reduce device sensitivity to residual losses. One instance of this approach is to use trenching into the device substrate in combination with superconductors and dielectrics with low intrinsic losses to improve quality factors and coherence times. Here we demonstrate titanium nitride coplanar waveguide resonators with mean quality factors exceeding two million and controlled trenching reaching 2.2 $μ$m into the silicon substrate. Additionally, we measure sets of resonators with a range of sizes and trench depths and compare these results with finite-element simulations to demonstrate quantitative agreement with a model of interface dielectric loss. We then apply this analysis to determine the extent to which trenching can improve resonator performance.

quant-ph↗

arXiv2014

Broadband Magnetometry and Temperature Sensing with a Light Trapping Diamond Waveguide

Solid-state quantum sensors are attracting wide interest because of their exceptional sensitivity at room temperature. In particular, the spin properties of individual nitrogen vacancy (NV) color centers in diamond make it an outstanding nanoscale sensor of magnetic fields, electric fields, and temperature, under ambient conditions. Recent work on ensemble NV-based magnetometers, inertial sensors, and clocks have employed $N$ unentangled color centers to realize a factor of up to $\sqrt{N}$ improvement in sensitivity. However, to realize fully this signal enhancement, new techniques are required to excite efficiently and to collect fluorescence from large NV ensembles. Here, we introduce a light-trapping diamond waveguide (LTDW) geometry that enables both high fluorescence collection ($\sim20\%$) and efficient pump absorption achieving an effective path length exceeding $1$ meter in a millimeter-sized device. The LTDW enables in excess of $2\%$ conversion efficiency of pump photons into optically detected magnetic resonance (ODMR) fluorescence, a \textit{three orders of magnitude} improvement over previous single-pass geometries. This dramatic enhancement of ODMR signal enables broadband measurements of magnetic field and temperature at less than $1$ Hz, a frequency range inaccessible by dynamical decoupling techniques. We demonstrate $\sim 1~\mbox{nT}/\sqrt{\mbox{Hz}}$ magnetic field sensitivity for $0.1$ Hz to $10$ Hz and a thermal sensitivity of $\sim 400 ~μ\mbox{K}/\sqrt{\mbox{Hz}}$ and estimate a spin projection limit at $\sim 0.36$ fT/$\sqrt{\mbox{Hz}}$ and $\sim 139~\mbox{pK}/\sqrt{\mbox{Hz}}$, respectively.

quant-ph↗

arXiv2012

Driven dynamics and rotary echo of a qubit tunably coupled to a harmonic oscillator

We have investigated the driven dynamics of a superconducting flux qubit that is tunably coupled to a microwave resonator. We find that the qubit experiences an oscillating field mediated by off-resonant driving of the resonator, leading to strong modifications of the qubit Rabi frequency. This opens an additional noise channel, and we find that low-frequency noise in the coupling parameter causes a reduction of the coherence time during driven evolution. The noise can be mitigated with the rotary-echo pulse sequence, which, for driven systems, is analogous to the Hahn-echo sequence.

cond-mat.supr-con↗