SearcharxivSearch

arXiv subjects

David J. Moss

Publications and source records attributed to David J. Moss.

At least 19 recordsLinked to original sources

Spectro-temporal shaping of broadband optical wavepackets via programmable on-chip photonics

The ability to precisely shape the properties of light over multiple degrees of freedom constitutes the foundation of modern photonic architectures. Broadband sources with addressable spectro-temporal content are for instance critical for applications spanning biomedical imaging, material processing, lidar, and ultrafast spectroscopy, but also key enabling technologies in quantum information processing, high-capacity communications, and optical computing. Yet, flexible and adjustable spectro-temporal shaping so far remains a significant challenge, as it requires the simultaneous manipulation of both frequency and temporal domains across broad spectral bandwidths and extended timescales, from femtoseconds to nanoseconds. Importantly, conventional approaches to spectro-temporal processing typically rely on bulky and complex optical systems that lack scalability and flexibility, ultimately hampering their utility for applications requiring addressable multiphotonic processes. Here, we present a framework for spectro-temporal wavepacket control over a broad bandwidth, merging programmable integrated photonics with high-speed optical characterization. Leveraging machine leaning for tailoring nonlinear pulse propagation, we experimentally report scalable and on-demand shaping of broadband ultrafast pulse patterns. We demonstrate the efficacy of our method through reconfigurable power across 400 nm bandwidth with picosecond resolution, with promises for applications where precise control over light is paramount, in particular those needing versatile and controllable multiphoton excitations.

physics.optics

Reconfigurable microwave photonic Fano filters based on optical Kerr microcombs

Microwave photonic (MWP) Fano filters, featuring asymmetric filter shapes that enable steep spectral transitions, are attractive for high bandwidth microwave signal processing such as frequency discrimination. However, achieving both steep spectral transitions and a high degree of reconfigurability remains challenging for conventional methods relying on direct mapping of Fano resonances generated by optical filters. Here, we propose and experimentally demonstrate a new way for realizing MWP Fano filters based on a microcomb-driven transversal filter system. Leveraging the large number of comb lines provided by microcombs as discrete taps, the transversal filter system can synthesize filter response that closely resembles Fano resonances, yielding high rolloff rates and slope rates up to 33.8 dB / GHz and 25.7 dB / GHz in our experiments, respectively. In addition, by simply programming the tap coefficients without changing any hardware, highly reconfigurable filter response can be realized. We experimentally demonstrate independent tuning of all three Fano characteristic parameters, including the asymmetry factor, resonance linewidth, and center frequency. These results verify the effectiveness of our approach for implementing highly reconfigurable MWP Fano filters with steep spectral transitions, offering strong versatility for meeting diverse requirements in practical applications.

physics.optics

High-Dimensional Quantum Photonics: Roadmap

The field of high-dimensional quantum photonics involves the use of multimode photonic degrees-of-freedom such as the spatial, temporal, or spectral structure of light to encode multi-level quantum states. Recent years have seen rapid progress in the development of methods to generate, manipulate, and distribute such quantum states of light and their use in a range of quantum technology applications that offer practical advantages over conventional qubit-based approaches. High-dimensional quantum states of light encoded in photonic time-bins, frequency-bins, transverse-spatial modes, waveguide paths, and temporal modes have enabled noise-robust fundamental tests of quantum mechanics, error-resilient and high-capacity quantum communication protocols, andas well as efficient approaches for quantum information processing, to name just a few examples. However, research in this field has progressed fairly independently, with little exchange across different photonic degrees-of-freedom or between experiment and theory and no comprehensive comparison between degrees-of-freedom. This roadmap aims to bridge this gap by surveying progress in each area and identifying shared challenges and opportunities that cut across two or more photonic degrees-of-freedoms. We review early work and state-of-the-art experimental techniques under development for high-dimensional quantum states encoded in single and entangled photons, as well as theoretical tools for their measurement and certification. We outline the main outstanding challenges for theory and each experimental degree-of-freedom, identifying promising future directions of research that may enable these to be overcome. We end by discussing interconnections and shared challenges centered around their distribution, measurement, and manipulation, with a view towards their integration into next-generation quantum technology platforms and applications.

quant-ph

AI assisted optimization of integrated waveguide polarizers containing 2D reduced graphene oxide

Reduced graphene oxide (rGO) exhibits strong anisotropic light absorption and high compatibility with photonic integrated chips, making it a promising material for implementing high performance onchip polarization selective devices. The performance of rGO integrated waveguide polarizers is highly dependent on the waveguide geometry, and achieving optimal performance requires exploring a large parameter space, making conventional mode simulation methods computationally demanding. Here, we propose and demonstrate a machine learning framework based on fully connected neural networks (FCNNs) to map the dependence of the polarizer figure of merit (FOM) on the waveguide geometry. Once trained by using a small dataset of low resolution mode simulation results, the FCNN framework can rapidly and accurately predict FOM values across a large structural parameter space with high resolution. Results show that this method can reduce overall computing time by more than 4 orders of magnitude as compared to the mode simulation methods, and achieve high prediction accuracy with an average deviation (AD) below 0.05. These results highlight the FCNN based machine learning framework as an efficient tool for the design and optimization of rGO integrated waveguide polarizers.

physics.optics

Supercontinuum generation in 2D graphene oxide film coated SiN waveguides

Enhanced supercontinuum generation (SCG) is experimentally demonstrated in integrated silicon nitride (Si3N4) waveguides incorporating highly nonlinear graphene oxide (GO) in the form of two dimensional (2D) films. Onchip integration of the 2D GO films with precise control of their thickness is realized by using a transfer free and layer by layer coating method. The control of the film length and coating position is achieved via window opening in the upper silica cladding of the photonic integrated chips. Detailed SCG measurements are performed using the fabricated devices with different waveguide geometries and GO film thicknesses, and the results are compared with devices without GO. Significantly improved spectral broadening of ultrashort optical pulses with ultrahigh peaks powers exceeding 1000 W is observed for the hybrid devices, achieving up to 2.4 times improvement in the spectral bandwidth relative to devices without GO. Theoretical analyses for the influence of GO film thickness, coating length, coating position, and waveguide geometry are also provided by fitting the experimental results with theory, showing that there is still significant room for further improvement. This work opens up a promising new avenue towards improving the SCG performance of photonic integrated devices by incorporating functional 2D materials.

physics.optics

AI based design of 2D material integrated optical polarizers

On-chip integration of highly anisotropic two-dimensional (2D) materials offers new opportunities for realizing high performance polarization selective devices. Obtaining optimized designs for such devices requires extensively sweeping large parameter spaces, which in conventional approaches relies on massive mode simulations that demand considerable computational resources. Here, we address this limitation by developing a machine learning (ML) model based on fully connected neural networks (FCNNs). Trained by using mode simulation results for low resolution structural parameters, the FCNN model can accurately predict polarizer figures of merits (FOMs) for high resolution parameters and rapidly map the global variation trend across the entire parameter space. We test the performance of the FCNN model using two types of polarizers with 2D graphene oxide (GO) and molybdenum disulfide (MoS2). Results show that, compared to conventional mode simulation approach, our approach can not only reduce the overall computing time by about 4 orders of magnitude, but also achieve highly accurate FOM predictions with an average deviation of less than 0.04. In addition, the measured FOM values for the fabricated devices show good agreement with the predicted ones, with discrepancies remaining below 0.2. These results validate artificial intelligence (AI) as an effective approach for designing and optimizing 2D-material based optical polarizers with high efficiency.

physics.optics

Enhanced selfphase modulation in silicon nitride waveguides with integrated 2D MoS2 films

On-chip integration of 2D materials provides a promising route towards next-generation integrated optical devices with performance beyond existing limits. Here, significantly enhanced spectral broadening induced by self-phase modulation (SPM) is experimentally demonstrated in silicon nitride (Si3N4) waveguides integrated with 2D monolayer molybdenum disulfide (MoS2) films. Monolayer MoS2 films with ultrahigh optical nonlinearity are synthesized via low-pressure chemical vapor deposition (LPCVD) and subsequently transferred onto Si3N4 waveguides, with precise control of the film coating length and placement achieved by selectively opening windows on the chip silica upper cladding. Detailed SPM measurements at telecom wavelengths are performed using fabricated waveguides with various MoS2 film coating lengths. Compared to devices without MoS2, increased spectral broadening of sub-picosecond optical pulses is observed for the hybrid devices, achieving a broadening factor of up to ~ 2.4 for a device with a 1.4-mm-long MoS2 film. Theoretical fitting of the experimental results further reveals an increase of up to ~27 fold in the nonlinear parameter (γ) for the hybrid MoS2 / Si3N4 waveguides and an equivalent Kerr coefficient (n2) of MoS2 nearly 5 orders of magnitude higher than Si3N4. These results confirm the effectiveness of on-chip integration of 2D MoS2 films to enhance the nonlinear optical performance of integrated photonic devices.

physics.optics

Topological Quenching of Noise in a Free-Running Moebius Microcomb

Microcombs require ultralow-noise repetition rates to enable next-generation applications in metrology, high-speed communications, microwave photonics, and sensing, where spectral purity is a central performance metric. Best-performing sources operate actively locked at "quiet points" in parameter space, fixed by device and material properties. Creating broad, low-noise operating regions with relaxed constraints-especially in simplified free-running architectures that avoid electronics-heavy control-remains an open challenge. Here, we demonstrate a symmetry-protected topological Möbius soliton molecule that enables intrinsically low phase noise in a fully free-running microcomb, operating without any external referencing or control. Using a microresonator-filtered laser, we implement a Möbius geometry via interleaved microcavity modes. Upon the formation of a topological Möbius soliton molecule, the free-running laser exhibits over 15 dB of phase-noise suppression across 10 Hz-10 kHz at a 100 GHz repetition rate, yielding -63 dBc/Hz phase noise at 1 kHz and an Allan deviation of 4x10^-10 at 10 s average time-without any external control. We show that the Möbius structure brings dynamic robustness to the comb, and we demonstrate a symmetry-protected topological regime that enables long-term drift-invariant operation. Our results establish a route to intrinsically noise-quenched microcombs operating in a fully free-running configuration, governed by internal physical principles and suitable for field-deployable, low-noise photonic systems.

physics.optics

Ultra-high performance microwave spectral filters using optical microcombs

Microwave photonic (MWP) filters are essential components in microwave systems due to their wide bandwidth, low loss, and immunity to electromagnetic interference. A sharp transition band is critical for precise spectral shaping and interference suppression, yet conventional MWP filters face challenges in achieving both sharp transitions and high reconfigurability. Adaptive MWP filters with sharp transition based on a transversal filter structure using an optical microcomb source are demonstrated in this paper. Four different types of single-band MWP filters with roll-off rates up to ~32.6 dB/GHz and a minimum shape factor of ~1.15 are achieved. In addition, simply through designing tap coefficients, band-pass filters with tunable centre frequencies ranging from 5 GHz to 15 GHz and dual-band MWP filters with various filter response are demonstrated without changing any hardware, where sharp transition is also validated. The adaptive filters with sharp transition presented in this paper offer a stable and highly reconfigurable solution for applications requiring stringent spectral selectivity, such as next-generation wireless networks, high-resolution radar imaging, and advanced biomedical photonic sensing.

physics.optics

Millimetre-Wave Comb Generated by an Optical Microcomb

Metrological-grade millimetre wave baseband comb sources covering the subterahertz window are a key building block for next-generation wireless communications, precision sensing, and positioning systems. While optical microcombs have set new benchmarks in ultra-low phase noise single-frequency microwave generation, to date, no microcomb source has directly produced a millimetre-wave baseband comb. Here, we present a 50 GHz repetition rate carrier-envelope offset estabilised millimetre-wave baseband comb source covering the sub-terahertz region, generated from an optical microcomb source. Our microresonator-filtered microcomb enables direct, coherent downconversion via photoconductive antennas, even without external amplification. The metrological-grade optical soliton source produces single-cycle, naturally zero carrier-envelope offset millimetrewave baseband combs. It supports time-domain spectroscopy without any need to temporally align the source and detection pulses, as the ultra-high phase coherence allows significant differences between the optical paths of the source and detection pulses, which we tested over 8m, finding no degradation even in freerunning operation. Finally, the multisoliton operation regime provides a simple way of spectrally tailoring the microwave output by selecting different optical soliton states.

physics.optics

Silicon Integrated Photonic Waveguide Polarizers with 2D MoS2 Films

Polarization control is of fundamental importance for modern optical systems, and optical polarizers serve as critical components for enabling this functionality. Here, we experimentally demonstrate optical polarizers by integrating 2D molybdenum disulfide (MoS2) films onto silicon photonic waveguides. High-quality monolayer MoS2 films with highly anisotropic light absorption are synthesized via a low-pressure chemical vapor deposition (LPCVD) method and subsequently transferred onto silicon-on-insulator (SOI) nanowire waveguides to fabricate integrated optical polarizers. Detailed measurements are carried out for the fabricated devices with various MoS2 film coating lengths and silicon waveguide geometry. The results show that a maximum polarization-dependent loss of ~21 dB is achieved, together with a high figure of merit of ~4.2. In addition, the hybrid waveguide polarizers exhibit broad operation bandwidth exceeding ~100 nm and excellent power durability. These results highlight the strong potential for on-chip integration of 2D MoS2 films to implement high-performance polarization selective devices.

physics.optics

Optical Kerr soliton microcombs for high bandwidth communications

Microcombs, optical frequency combs generated by nonlinear integrated micro-cavity resonators, have the potential to offer the full capability of their benchtop comb based counterparts, but in an integrated footprint. They have enabled breakthroughs in spectroscopy, microwave photonics, frequency synthesis, optical ranging, quantum state generation and manipulation, metrology, optical neuromorphic processing and more. One of their most promising applications has been optical fibre communications where they have formed the basis for massively parallel ultrahigh capacity multiplexed data transmission. Innovative approaches have been used in recent years to phaselock, or modelock different types of microcombs, from dissipative Kerr solitons to dark solitons, soliton crystals and others. This has enabled their use as sources for optical communications including advanced coherent modulation format systems that have achieved ultrahigh data capacity bit rates breaking the petabit/s barrier. Here, we review this new and exciting field, chronicling the progress while highlighting the challenges and opportunities.

physics.optics

Integrated photonics incorporating 2D materials for practical applications

On-chip integration of 2D materials with exceptional optical properties provides an attractive solution for next-generation photonic integrated circuits to address the limitations of conventional bulk integrated platforms. Over the past two decades, significant advancements have been made in the interdisciplinary field of 2D material integrated photonics, greatly narrowing the gap between laboratory research and industrial applications. In this paper, we provide a perspective on the developments of this field towards industrial manufacturing and commercialization. First, we review recent progress towards commercialization. Next, we provide an overview of cutting-edge fabrication techniques, which are categorized into large-scale integration, precise patterning, dynamic tuning, and device packaging. Both the advantages and limitations of these techniques are discussed in relation to industrial manufacturing. Finally, we highlight some important issues related to commercialization, including fabrication standards, recycling, service life, and environmental implications.

physics.optics

Integrated microring resonator and waveguide polarizers based on partially photo-reduced 2D graphene oxide thin films

Optical polarizers, which selectively transmit light with specific polarization states, are essential components in modern optical systems. Here, we experimentally demonstrate integrated waveguide and microring resonator (MRR) polarizers incorporating reduced graphene oxide (rGO). 2D graphene oxide (GO) films are integrated onto silicon photonic devices with precise control over their thicknesses and sizes, followed by GO reduction via two different methods including uniform thermal reduction and localized photothermal reduction. We measure devices with different lengths, thicknesses, and reduction degrees of the GO films. The results show that the devices with rGO exhibit better performance than those with GO, achieving a polarization-dependent loss of ~47 dB and a polarization extinction ratio of ~16 dB for the hybrid waveguides and MRRs with rGO, respectively. By fitting the experimental results with theory, it is found that rGO exhibits more significant anisotropy in loss, with an anisotropy ratio over 4 times that of GO. In addition, rGO shows higher thermal stability and greater robustness to photothermal reduction than GO. These results highlight the strong potential of rGO films for implementing high-performance polarization selective devices in integrated photonic platforms.

physics.optics

Modeling of photonic integrated resonators using advanced scattering matrix methods

We propose a universal approach for modeling complex integrated photonic resonators based on the scattering matrix method. By dividing devices into basic elements including directional cou-plers and connecting waveguides, our approach can be used to model integrated photonic reso-nators with both unidirectional and bidirectional light propagation, with the simulated spectral response showing good agreement with experimental results. A simplified form of our ap-proach, which divides devices into several independent submodules such as microring resonators and Sagnac interferometers, is also introduced to streamline the calculation of spectral transfer functions. Finally, we discuss the deviations introduced by approximations in our modeling, along with strategies for improving modeling accuracy. Our approach is universal across dif-ferent integrated platforms, providing a useful tool for designing and optimizing integrated photonic devices with complex configurations.

physics.optics

Contrasting the relative performance of RF photonic transversal signal processors based on microcombs using discrete components versus integrated devices

RF photonic transversal signal processors, which combine reconfigurable electrical digital signal processing and high-bandwidth photonic processing, provide a powerful solution for achieving adaptive high-speed information processing. Recent progress in optical microcomb technology provides compelling multi-wavelength sources with compact footprint, yielding a variety of microcomb-based RF photonic transversal signal processors implemented by either discrete or integrated components. Although operating based on the same principle, processors in these two forms exhibit distinct performance. This letter presents a comparative investigation into their performance. First, we compare the performance of state-of-the-art processors, focusing on the processing accuracy. Next, we analyze various factors that contribute to the performance differences, including tap number and imperfect response of experimental components. Finally, we discuss the potential for future improvement. These results provide a comprehensive comparison of microcomb based RF photonic transversal signal processors implemented using discrete and integrated components and provide insights for their future development.

physics.optics

Thermal investigation of bistability in high index doped silica integrated ring resonators

The utilization and engineering of thermo-optic effects have found broad applications in integrated photonic devices, facilitating efficient light manipulation to achieve various functionalities. Here, we perform both an experimental characterization and theoretical analysis of these effects in integrated micro-ring resonators in high index doped silica (HIDS), which has had many applications in integrated photonics and nonlinear optics. By fitting the experimental results with theory, we obtain fundamental parameters that characterize their thermo-optic performance, including the thermo-optic coefficient, the efficiency for the optically induced thermo-optic process, and the thermal conductivity. The characteristics of these parameters are compared to those of other materials commonly used for integrated photonic platforms, such as silicon, silicon nitride, and silica. These results offer a comprehensive insight into the thermo-optic properties of HIDS based devices. Understanding these properties is essential for efficiently controlling and engineering them in many practical applications.

physics.optics

Roadmap on Neuromorphic Photonics

This roadmap consolidates recent advances while exploring emerging applications, reflecting the remarkable diversity of hardware platforms, neuromorphic concepts, and implementation philosophies reported in the field. It emphasizes the critical role of cross-disciplinary collaboration in this rapidly evolving field.

cs.ET