arXiv subjects

David J. Moss

Publications and source records attributed to David J. Moss.

At least 37 records · Page 2Linked to original sources

arXiv2024

Photonic real-time signal processing

The simultaneous progress of integrated optical frequency comb (OFC) and radio frequency (RF) photonic signal processing technique have promoted the rapid development of real-time signal processing. Integrated optical frequency comb offer multiple wavelengths as a powerful source for RF photonic signal transversal filter. Here, we review development of real-time signal processing system consisting of integrated OFC and RF photonic signal transversal filter in chronological order, and focus on the applications of this system such as differentiator, integrator, Hilbert transformer, and image processor. We also discuss and present our outlook on more parallel functions and further integration of real-time signal processing system.

physics.optics↗

arXiv2024

Turnkey deterministic soliton crystal generation

The deterministic generation of robust soliton comb has significant meaning for the optical frequency combs to be widely used in various applications. As a novel form of microcomb, Soliton crystal holds the advantages of easy generation, high conversion efficiency, and excellent thermal robustness. Here, we report the turnkey deterministic generation of "Palm-like" soliton crystal with a free-running scheme. The robustness of the turnkey soliton crystal generation is also investigated in multiple aspects, including the success rate, the thermal robustness, and the long-term stability. The experiment results reveal our turnkey soliton crystal can achieve nearly a 100% success rate with a power variation less than 1.5 dB over one hundred trials of two samples, is insensitive to thermal effect, and is robust to the environment during four-hour laboratory time.

physics.optics↗

arXiv2024

Graphene oxide for high performance nonlinear optics in integrated nanowires

We report enhanced nonlinear optics in integrated nanophotonic chips through the use of integrated with 2D graphene oxide (GO) films. We investigate nanophotonic platforms including silicon, silicon nitride and high index doped silica. Due to the high Kerr nonlinearity of GO films and low nonlinear absorption we observe significant enhancement of third-order nonlinear processes. In particular, in silicon we observe an increase in both the Kerr nonlinearity and nonlinear figure of merit of up to 20 times. These results show the strong capability of GO films for improving the nonlinear optical performance of integrated photonic devices.

physics.optics↗

arXiv2024

Designing and analyzing microwave photonic spectral domain filters based on transversal filtering with optical microcombs

Microwave transversal filters, which are implemented based on the transversal filter structure in digital signal processing, offer a high reconfigurability for achieving a variety of signal processing functions without changing hardware. When implemented using microwave photonic (MWP) technologies, also known as MWP transversal filters, they provide competitive advantages over their electrical counterparts, such as low loss, large operation bandwidth, and strong immunity to electromagnetic interference. Recent advances in high performance optical microcombs provide compact and powerful multiwavelength sources for MWP transversal filters that require a larger number of wavelength channels to achieve high performance, allowing for the demonstration of a diverse range of filter functions with improved performance and new features. Here, we present a comprehensive performance analysis for microcomb based MWP spectral filters based on the transversal filter approach. First, we investigate the theoretical limitations in the filter spectral response induced by finite tap numbers. Next, we analyze the distortions in the filter spectral response resulting from experimental error sources. Finally, we assess the influence of input signals bandwidth on the filtering errors. These results provide a valuable guide for the design and optimization of microcomb-based MWP transversal filters for a variety of applications.

physics.optics↗

arXiv2024

Integrated nanophotonic polarizers in silicon waveguides and ring resonators using graphene oxide 2D films

We experimentally demonstrate waveguide and microring resonator (MRR) polarizers by integrating 2D graphene oxide (GO) films onto silicon (Si) photonic devices. The 2D GO films with highly anisotropic light absorption are on-chip integrated with precise control over their thicknesses and sizes. Detailed measurements are performed for the fabricated devices with different GO film thicknesses, coating lengths, and Si waveguide widths. The results show that a maximum polarization-dependent loss (PDL) of ~17 dB is achieved for the hybrid waveguides, and the hybrid MRRs achieved a maximum polarization extinction ratio (PER) of ~10 dB. We also characterize the wavelength- and power-dependent response for these polarizers. The former demonstrates a broad operation bandwidth of over ~100 nm, and the latter verifies performance improvement enabled by photo-thermal changes in GO films. By fitting the experimental results with theoretical simulations, we find that the anisotropy in the loss of GO films dominates the polarization selectivity of these devices. These results highlight the strong potential of 2D GO films for realizing high-performance polarization selective devices in Si photonic platform.

physics.optics↗

arXiv2024

Photonic integrated circuit polarizers based on 2D materials

Optical polarizers are essential components for the selection and manipulation of light polarization states in optical systems. Over the past decade, the rapid advancement of photonic technologies and devices has led to the development of a range of novel optical polarizers, opening avenues for many breakthroughs and expanding applications across diverse fields. Particularly, two dimensional (2D) materials, known for their atomic thin film structures and unique optical properties, have become attractive for implementing optical polarizers with high performance and new features that were not achievable before. This paper reviews recent progress in 2D material based optical polarizers. First, an overview of key properties of various 2D materials for realizing optical polarizers is provided. Next, the state of the art optical polarizers based on 2D materials, which are categorized into spatial light devices, fiber devices, and integrated waveguide devices, are reviewed and compared. Finally, we discuss the current challenges of this field as well as the exciting opportunities for future technological advances.

physics.optics↗

arXiv2024

Large and layer dependent nonlinear optical absorption of MXene 2D thin films

As a rapidly expanding family of two dimensional (2D) materials, MXenes have recently gained considerable attention due to their appealing properties. Here, by developing a solution based coating method that enables transfer free and layer by layer film coating, we investigate the layer dependent nonlinear optical absorption of Ti3C2Tx films, an important member of the MXene family. By using the Zscan technique, we characterize the nonlinear absorption of the prepared MXene films consisting of different numbers of monolayers. The results show that there is a strong and layer dependent nonlinear absorption behavior, transitioning from revisable saturable absorption (RSA) to saturable absorption (SA) as the layer number increases from 5 to 30. Notably, the nonlinear absorption coefficient beta varies significantly within this range, changing from 7.13 x 100 cm/GW to -2.69 100 cm/GW. We also characterize the power dependent nonlinear absorption of the MXene films at various incident laser intensities, and a decreasing trend in beta is observed for increasing laser intensity. These results reveal the intriguing layer dependent nonlinear optical properties of 2D MXene films, highlighting their versatility and potential for implementing high-performance nonlinear photonic devices.

physics.optics↗

arXiv2024

Graphene oxide two dimensional films for thermo-optic photonic integrated devices

Efficient heat management and control in optical devices, facilitated by advanced thermo-optic materials, is critical for many applications such as photovoltaics, thermal emitters, mode-locked lasers, and optical switches. Here, we investigate the thermo-optic properties of 2D graphene oxide (GO) films by precisely integrating them onto microring resonators (MRRs) with control over the film thicknesses and lengths. We characterize the refractive index, extinction coefficient, thermo-optic coefficient, and thermal conductivity of for the GO films with different layer numbers and degrees of reduction, including reversible reduction and enhanced optical bistability induced by photo-thermal effects. Experimental results show that the thermo-optic properties of 2D GO films vary widely with the degree of reduction, with significant polarization anisotropy, enabling efficient polarization sensitive devices. The versatile thermo-optic response of 2D GO substantially expands the scope of functionalities and devices that can be engineered, making it promising for a diverse range of thermo-optic applications.

physics.optics↗

arXiv2024

Novel functions in silicon photonic chips incorporated with graphene oxide thin films

On-chip integration of two-dimensional (2D) materials with unique structures and distinctive properties endow integrated devices with new functionalities and improved performance. With a high flexibility in modifying its properties and a strong compatibility with various integrated platforms, graphene oxide (GO) becomes an attractive 2D material for implementing functional hybrid integrated devices. Here, we demonstrate novel functionalities that go beyond the capabilities of conventional photonic integrated circuits, by harnessing the photo-thermal effects in 2D GO films integrated onto them. These include all-optical control and switching, optical power limiting, and non-reciprocal light transmission. The 2D layered GO films are on-chip integrated with precise control of their thicknesses and sizes. Benefitting from the broadband response of 2D GO films, all the three functionalities feature a very wide operational bandwidth. By fitting the experimental results with theory, we also extract the changes in material properties induced by the photo-thermal effects, which reveal interesting insights about 2D GO films. These results highlight the versatility of 2D GO films in implementing functional integrated photonic devices for a range of applications.

physics.optics↗

arXiv2024

Microwave photonic transversal filters based on microcombs with feedback control

Feedback control plays a crucial role in improving system accuracy and stability for a variety of scientific and engineering applications. Here, we theoretically and experimentally investigate the implementation of feedback control in microwave photonic (MWP) transversal filter systems based on optical microcomb sources, which offer advantages in achieving highly reconfigurable processing functions without requiring changes to hardware. We propose four different feedback control methods including (1) one stage spectral power reshaping, (2) one stage impulse response reshaping, (3) two stage spectral power reshaping, and (4) two stage synergic spectral power reshaping and impulse response reshaping. We experimentally implement these feedback control methods and compare their performance. The results show that the feedback control can significantly improve not only the accuracy of comb line shaping as well as temporal signal processing and spectral filtering, but also the systems long term stability. Finally, we discuss the current limitations and future prospects for optimizing feedback control in microcomb based MWP transversal filter systems implemented by both discrete components and integrated chips. Our results provide a comprehensive guide for the implementation of feedback control in microcomb based MWP filter systems in order to improve their performance for practical applications.

physics.optics↗

arXiv2024

Dual-polarization RF Channelizer Based on Kerr Soliton Microcomb Sources

We report a dual-polarization radio frequency (RF) channelizer based on microcombs. With the tailored mismatch between the FSRs of the active and passive MRRs, wideband RF spectra can be channelized into multiple segments featuring digital compatible bandwidths via the Vernier effect. Due to the use of dual polarization states, the number of channelized spectral segments, and thus the RF instantaneous bandwidth (with a certain spectral resolution), can be doubled. In our experiments, we used 20 microcomb lines with 49 GHz FSR to achieve 20 channels for each polarization, with high RF spectra slicing resolutions at 144 MHz (TE) and 163 MHz (TM), respectively; achieving an instantaneous RF operation bandwidth of 3.1 GHz (TE) and 2.2 GHz (TM). Our approach paves the path towards monolithically integrated photonic RF receivers (the key components active and passive MRRs are all fabricated on the same platform) with reduced complexity, size, and unprecedented performance, which is important for wide RF applications with digital compatible signal detection.

physics.optics↗

arXiv2024

Rabi resonance splitting phenomena in photonic integrated circuits

Realizing optical analogues of quantum phenomena in atomic, molecular, or condensed matter physics has underpinned a range of photonic technologies. Rabi splitting is a quantum phenomenon induced by a strong interaction between two quantum states, and its optical analogues are of fundamental importance for the manipulation of light-matter interactions with wide applications in optoelectronics and nonlinear optics. Here, we propose and theoretically investigate purely optical analogues of Rabi splitting in integrated waveguide-coupled resonators formed by two Sagnac interferometers. By tailoring the coherent mode interference, the spectral response of the devices is engineered to achieve optical analogues of Rabi splitting with anti-crossing behavior in the resonances. Transitions between the Lorentzian, Fano, and Rabi splitting spectral lineshapes are achieved by simply changing the phase shift along the waveguide connecting the two Sagnac interferometers, revealing interesting physical insights about the evolution of different optical analogues of quantum phenomena. The impact of the device structural parameters is also analyzed to facilitate device design and optimization. These results suggest a new way for realizing optical analogues of Rabi splitting based on integrated waveguide-coupled resonators, paving the way for many potential applications that manipulate light-matter interactions in the strong coupling regime.

physics.optics↗

arXiv2024

Third-order nonlinear optical response of 2D materials in the telecom band

All-optical signal processing based on nonlinear optical devices is promising for ultrafast information processing in optical communication systems. Recent advances in two-dimensional (2D) layered materials with unique structures and distinctive properties have opened up new ave-nues for nonlinear optics and the fabrication of related devices with high performance. This paper reviews the recent advances in research on third-order optical nonlinearities of 2D materials, focus-ing on all-optical processing applications in the optical telecommunications band near 1550 nm. First, we provide an overview of the material properties of different 2D materials. Next, we review different methods for characterizing the third-order optical nonlinearities of 2D materials, including the Z-scan technique, third-harmonic generation (THG) measurement, and hybrid device character-ization, together with a summary of the measured n2 values in the telecommunications band. Fi-nally, the current challenges and future perspectives are discussed.

physics.optics↗

arXiv2024

The performance of microwave photonic signal processors based on microcombs with different input signal waveforms

Microwave photonic (MWP) signal processors, which process microwave signals based on pho-tonic technologies, bring advantages intrinsic to photonics such as low loss, large processing bandwidth, and strong immunity to electromagnetic interference. Optical microcombs can offer a large number of wavelength channels and compact device footprints, which make them powerful multi-wavelength sources for MWP signal processors to realize a variety of processing functions. In this paper, we experimentally demonstrate the capability of microcomb-based MWP signal processors to handle diverse input signal waveforms. In addition, we quantify the processing accuracy for different input signal waveforms, including Gaussian, triangle, parabolic, super Gaussian, and nearly square waveforms. Finally, we analyze the factors contributing to the dif-ference in the processing accuracy among the different input waveforms, and our theoretical analysis well elucidates the experimental results. These results provide a guidance for micro-comb-based MWP signal processors when processing microwave signals of various waveforms.

physics.optics↗

arXiv2024

Photonic RF Channelization Based on Microcombs

In recent decades, microwave photonic channelization techniques have developed significantly. Characterized by low loss, high versatility, large instantaneous bandwidth, and immunity to electromagnetic interference, microwave photonic channelization addresses the requirements of modern radar and electronic warfare for receivers. Microresonator-based optical frequency combs are promising devices for photonic channelized receivers, enabling full advantage of multicarriers, large bandwidths, and accelerating the integration process of microwave photonic channelized receivers. In this paper, we review the research progress and trends in microwave photonic channelization, focusing on schemes that utilize integrated microcombs. We discuss the potential of microcomb-based RF channelization, as well as their challenges and limitations, and provide perspectives for their future development in the context of on-chip silicon-based photonics.

physics.optics↗

arXiv2024

Photonic real time video image signal processor at 17Tb/s based on a Kerr microcomb

Signal processing has become central to many fields, from coherent optical telecommunications, where it is used to compensate signal impairments, to video image processing. Image processing is particularly important for observational astronomy, medical diagnosis, autonomous driving, big data and artificial intelligence. For these applications, signal processing traditionally has mainly been performed electronically. However these, as well as new applications, particularly those involving real time video image processing, are creating unprecedented demand for ultrahigh performance, including high bandwidth and reduced energy consumption. Here, we demonstrate a photonic signal processor operating at 17 Terabits/s and use it to process video image signals in real-time. The system processes 400,000 video signals concurrently, performing 34 functions simultaneously that are key to object edge detection, edge enhancement and motion blur. As compared with spatial-light devices used for image processing, our system is not only ultra-high speed but highly reconfigurable and programable, able to perform many different functions without any change to the physical hardware. Our approach is based on an integrated Kerr soliton crystal microcomb, and opens up new avenues for ultrafast robotic vision and machine learning.

physics.optics↗

arXiv2024

Waveguide optical parametric amplifiers in silicon nitride with 2D graphene oxide films

Optical parametric amplification (OPA) represents a powerful solution to achieve broadband amplification in wavelength ranges beyond the scope of conventional gain media, for generating high-power optical pulses, optical microcombs, entangled photon pairs and a wide range of other applications. Here, we demonstrate optical parametric amplifiers based on silicon nitride (Si3N4) waveguides integrated with two-dimensional (2D) layered graphene oxide (GO) films. We achieve precise control over the thickness, length, and position of the GO films using a transfer-free, layer-by-layer coating method combined with accurate window opening in the chip cladding using photolithography. Detailed OPA measurements with a pulsed pump for the fabricated devices with different GO film thicknesses and lengths show a maximum parametric gain of ~24.0 dB, representing a ~12.2 dB improvement relative to the device without GO. We perform a theoretical analysis of the device performance, achieving good agreement with experiment and showing that there is substantial room for further improvement. This work represents the first demonstration of integrating 2D materials on chips to enhance the OPA performance, providing a new way of achieving high performance photonic integrated OPA by incorporating 2D materials.

physics.optics↗

arXiv2023

Microwave photonic filters via radio frequency bandwidth scaling based on soliton crystal optical micro-combs

We demonstrate high-resolution photonic RF filters using an RF bandwidth scaling approach based on integrated Kerr optical micro-combs. By employing both an active nonlinear micro-ring resonator (MRR) as a high-quality micro-comb source and a passive high-Q MRR to slice the shaped comb, a large RF instantaneous bandwidth of 4.64 GHz and a high resolution of 117 MHz are achieved, together with a broad RF operation band covering 3.28 to 19.4 GHz (L to Ku bands) using thermal tuning. We achieve programmable RF transfer functions including binary-coded notch filters and RF equalizing filters with reconfigurable slopes. Our approach is an attractive solution for high performance RF spectral shaping with high performance and flexibility.

physics.app-ph↗