arXiv subjects

David J. Moss

Publications and source records attributed to David J. Moss.

At least 55 records · Page 3Linked to original sources

arXiv2023

Maximizing the performance for microcomb based microwave photonic transversal signal processors

Microwave photonic (MWP) transversal signal processors offer a compelling solution for realizing versatile high-speed information processing by combining the advantages of reconfigurable electrical digital signal processing and high-bandwidth photonic processing. With the capability of generating a number of discrete wavelengths from micro-scale resonators, optical microcombs are powerful multi-wavelength sources for implementing MWP transversal signal processors with significantly reduced size, power consumption, and complexity. By using microcomb-based MWP transversal signal processors, a diverse range of signal processing functions have been demonstrated recently. In this paper, we provide a detailed analysis for the processing inaccuracy that is induced by the imperfect response of experimental components. First, we investigate the errors arising from different sources including imperfections in the microcombs, the chirp of electro-optic modulators, chromatic dispersion of the dispersive module, shaping errors of the optical spectral shapers, and noise of the photodetector. Next, we provide a global picture quantifying the impact of different error sources on the overall system performance. Finally, we introduce feedback control to compensate the errors caused by experimental imperfections and achieve significantly improved accuracy. These results provide a guide for optimizing the accuracy of microcomb-based MWP transversal signal processors.

eess.SP↗

arXiv2023

Theory for the Accuracy of Microcomb Photonic Microwave Transversal Signal Processors

Photonic RF transversal signal processors, which are equivalent to reconfigurable electrical digital signal processors but implemented with photonic technologies, have been widely used for modern high-speed information processing. With the capability of generating large numbers of wavelength channels with compact micro-resonators, optical microcombs bring new opportunities for realizing photonic RF transversal signal processors that have greatly reduced size, power consumption, and complexity. Recently, a variety of signal processing functions have been demonstrated using microcomb-based photonic RF transversal signal processors. Here, we provide detailed analysis for quantifying the processing accuracy of microcomb-based photonic RF transversal signal processors. First, we investigate the theoretical limitations of the processing accuracy determined by tap number, signal bandwidth, and pulse waveform. Next, we discuss the practical error sources from different components of the signal processors. Finally, we analyze the contributions of the theoretical limitations and the experimental factors to the overall processing inaccuracy both theoretically and experimentally. These results provide a useful guide for designing microcomb-based photonic RF transversal signal processors to optimize their accuracy.

physics.optics↗

arXiv2023

Sagnac interference in integrated photonics for reflection mirrors, gyroscopes, filters, and wavelength interleavers

As a fundamental optical approach to interferometry, Sagnac interference has been widely used for reflection manipulation, precision measurements, and spectral engineering in optical systems. Compared to other interferometry configurations, it offers attractive advantages by yielding a reduced system complexity without the need for phase control between different pathways, thus offering a high degree of stability against external disturbance and a low wavelength dependence. The advance of integration fabrication techniques has enabled chip-scale Sagnac interferometers with greatly reduced footprint and improved scalability compared to more conventional approaches implemented by spatial light or optical fiber devices. This facilitates a variety of integrated photonic devices with bidirectional light propagation, showing new features and capabilities compared to unidirectional-light-propagation devices such as Mach-Zehnder interferometers (MZIs) and ring resonators (RRs). Here, we present our latest results for functional integrated photonic devices based on Sagnac interference. We outline the theory of integrated Sagnac interference devices with comparisons to other integrated photonic building blocks such as MZIs, RRs, photonic crystal cavities, and Bragg gratings. We present our latest results for Sagnac interference devices realized in integrated photonic chips, including reflection mirrors, optical gyroscopes, basic filters, wavelength (de)interleavers, and optical analogues of quantum physics.

physics.optics↗

arXiv2023

Review: Graphene oxide 2D thin films for high performance nonlinear integrated photonics

Integrated photonic devices operating via optical nonlinearities offer a powerful solution for all optical information processing, yielding processing speeds that are well beyond that of electronic processing as well as providing the added benefits of compact footprint, high stability, high scalability, and small power consumption. The increasing demand for high performance nonlinear integrated photonic devices has facilitated the hybrid integration of novel materials to address the limitations of existing integrated photonic platforms, such as strong nonlinear optical absorption or an inadequate optical nonlinearity. Recently, graphene oxide (GO), with its large optical nonlinearity, high flexibility in altering its properties, and facile fabrication processes, has attracted significant attention, enabling many hybrid nonlinear integrated photonic devices with improved performance and novel capabilities. This paper reviews the applications of GO to nonlinear integrated photonics. First, an overview of GOs optical properties and the fabrication technologies needed for its onchip integration is provided. Next, the state of the art GO nonlinear integrated photonic devices are reviewed, together with comparisons of the nonlinear optical performance of different integrated platforms incorporating GO. Finally, the challenges and perspectives of this field are discussed.

physics.optics↗

arXiv2022

Photo-thermal tuning of graphene oxide coated integrated optical waveguides

We experimentally investigate power sensitive photothermal tuning (PTT) of two dimensional (2D) graphene oxide (GO) films coated on integrated optical waveguides. We measure the light power thresholds for reversible and permanent GO reduction in silicon nitride (SiN) waveguides integrated with 1 and 2 layers of GO. Raman spectra at different positions of a hybrid waveguide with permanently reduced GO are characterized, verifying the inhomogeneous GO reduction along the direction of light propagation through the waveguide. The differences between the PTT induced by a continuous wave laser and a pulsed laser are also compared, confirming that the PTT mainly depend on the average input power. These results reveal interesting features for 2D GO films coated on integrated optical waveguides, which are of fundamental importance for the control and engineering of GO properties in hybrid integrated photonic devices.

physics.optics↗

arXiv2022

Spectral engineering of integrated photonic filters using mode splitting in silicon nanowire integrated standing-wave resonators

Mode splitting induced by coherent optical mode interference in coupled resonant cavities is a key phenomenon in photonic resonators that can lead to powerful and versatile filtering functions, in close analogy to electromagnetically-induced-transparency, Autler-Townes splitting, Fano resonances, and dark states. It can not only break the dependence between quality factor, free spectral range, and physical cavity length, but can also lead to group delay response and mode interactions that are useful for enhancing light-material interaction and dispersion engineering in nonlinear optics. In this work, we investigate mode splitting in standing-wave (SW) resonators implemented by cascaded Sagnac loop reflectors (CSLRs) and demonstrate its use for engineering the spectral profile of integrated photonic filters. By changing the reflectivity of the Sagnac loop reflectors (SLRs) and the phase shifts along the connecting waveguides, we tailor mode splitting in the CSLR resonators to achieve a wide range of filter shapes for diverse applications including enhanced light trapping, flat-top filtering, Q factor enhancement, and signal reshaping. We present the theoretical designs and compare the performance of CSLR resonators with three, four, and eight SLRs fabricated in silicon-on-insulator nanowires. We achieve high performance and versatile filter shapes via diverse mode splitting that agree well with theory. The experimental results confirm the effectiveness of our approach towards realizing integrated multi-functional SW filters for flexible spectral engineering.

physics.optics↗

arXiv2022

Neuromorphic computing using wavelength-division multiplexing

Optical neural networks (ONNs), or optical neuromorphic hardware accelerators, have the potential to dramatically enhance the computing power and energy efficiency of mainstream electronic processors, due to their ultralarge bandwidths of up to 10s of terahertz together with their analog architecture that avoids the need for reading and writing data back and forth. Different multiplexing techniques have been employed to demonstrate ONNs, amongst which wavelength division multiplexing (WDM) techniques make sufficient use of the unique advantages of optics in terms of broad bandwidths. Here, we review recent advances in WDM based ONNs, focusing on methods that use integrated microcombs to implement ONNs. We present results for human image processing using an optical convolution accelerator operating at 11 Tera operations per second. The open challenges and limitations of ONNs that need to be addressed for future applications are also discussed.

physics.optics↗

arXiv2022

Phase-encoded RF signal generation based on an integrated 49GHz micro-comb optical source

We demonstrate photonic RF phase encoding based on an integrated micro-comb source. By assembling single-cycle Gaussian pulse replicas using a transversal filtering structure, phase encoded waveforms can be generated by programming the weights of the wavelength channels. This approach eliminates the need for RF signal generators for RF carrier generation or arbitrary waveform generators for phase encoded signal generation. A large number of wavelengths of up to 60 were provided by the microcomb source, yielding a high pulse compression ratio of 30. Reconfigurable phase encoding rates ranging from 2 to 6 Gb/s were achieved by adjusting the length of each phase code. This work demonstrates the significant potentials of this microcomb-based approach to achieve high-speed RF photonic phase encoding with low cost and footprint.

physics.app-ph↗

arXiv2022

Enhanced self-phase modulation in silicon nitride waveguides integrated with 2D graphene oxide films

We experimentally demonstrate enhanced self-phase modulation (SPM) in silicon nitride (Si3N4) waveguides integrated with 2D graphene oxide (GO) films. GO films are integrated onto Si3N4 waveguides using a solution-based, transfer-free coating method that enables precise control of the film thickness. Detailed SPM measurements are carried out using both picosecond and femtosecond optical pulses. Owing to the high Kerr nonlinearity of GO, the hybrid waveguides show significantly improved spectral broadening compared to the uncoated waveguide, achieving a broadening factor of up to ~3.4 for a device with 2 layers of GO. By fitting the experimental results with theory, we obtain an improvement in the waveguide nonlinear parameter by a factor of up to 18.4 and a Kerr coefficient (n2) of GO that is about 5 orders of magnitude higher than Si3N4. Finally, we provide a theoretical analysis for the influence of GO film length, coating position, and its saturable absorption on the SPM performance. These results verify the effectiveness of on-chip integrating 2D GO films to enhance the nonlinear optical performance of Si3N4 devices.

physics.optics↗

arXiv2022

Enhanced spectral broadening via self-phase modulation with femtosecond optical pulses in silicon nanowires integrated with 2D graphene oxide films

We experimentally demonstrate enhanced spectral broadening of femtosecond optical pulses af-ter propagation through silicon-on-insulator (SOI) nanowire waveguides integrated with two-dimensional (2D) graphene oxide (GO) films. Owing to the strong mode overlap between the SOI nanowires and the GO films with a high Kerr nonlinearity, the self-phase modulation (SPM) process in the hybrid waveguides is significantly enhanced, resulting in greatly improved spectral broadening of the femtosecond optical pulses. A solution-based, transfer-free coating method is used to integrate GO films onto the SOI nanowires with precise control of the film thickness. Detailed SPM measurements using femtosecond optical pulses are carried out, achieving a broadening factor of up to ~4.3 for a device with 0.4-mm-long, 2 layers of GO. By fit-ting the experimental results with theory, we obtain an improvement in the waveguide nonlin-ear parameter by a factor of ~3.5 and the effective nonlinear figure of merit (FOM) by a factor of ~3.8, relative to the uncoated waveguide. Finally, we discuss the influence of GO film length on the spectral broadening and compare the nonlinear optical performance of different integrated waveguides coated with GO films. These results confirm the improved nonlinear optical per-formance for silicon devices integrated with 2D GO films.

physics.optics↗

arXiv2022

Silicon nanophotonic chips featuring Sagnac loop reflectors as a basis for advanced optical spectral filters

We present and investigate theoretically photonic integrated filters based on 2 Sagnac coupled loop reflectors (SLRs) that are arranged in a self-coupled optical waveguide. We recently presented photonic integrated filters based on coupled and cascaded SLRs. In this paper, we advance this field by investigating a unique approach of employing coupled SLRs formed by self-coupled waveguides. This allows us to achieve high performance filter functions including Fano-like resonances and wavelength interleaving with a simpler design and a higher fabrication tolerance by tailoring coherent mode interference in the device. Our design takes into account the device fabrication issues as well as the requirements for practical applications. As a guide for practical device fabrication, an analysis of the impact of the structural parameters and fabrication tolerance on each filter function is also provided. The Fano-like resonances show a low insertion loss (IL) of 1.1 dB, a high extinction ratio of 30.2 dB, and a high slope rate (SR) of 747.64 dB/nm. The combination of low IL and high SR promises this device for Fano resonance applications. Our device also can achieve wavelength de-interleaving function with high fabrication tolerance which is advantageous for applications such as optical interleavers that require a symmetric flat-top filter shape. Optical de-interleavers and interleavers are key components for optical signal multiplexing and demultiplexing for wavelength division multiplexing optical communication systems. Versatile spectral responses with a simple design, compact device footprint, and high fabrication tolerance make this approach highly promising for flexible response shaping for many applications.

physics.optics↗

arXiv2022

Graphene oxide 2D films integrated with nanowires and ring resonators for enhanced nonlinear optics

We report enhanced nonlinear optics in nanowires, waveguides, and ring resonators by introducing layered two-dimensional (2D) graphene oxide (GO) films through experimental demonstration. The GO films are integrated on silicon-on-insulator nanowires (SOI), high index doped silica glass, and silicon nitride (SiN) waveguides and microring resonators (MRRs), to demonstrate an improved optical nonlinearity including Kerr nonlinearity and four-wave mixing (FWM). By using a large-area, transfer-free, layer-by-layer GO coating method with photolithography and lift-off processes, we integrate GO films on these complementary metal-oxide-semiconductor (CMOS)-compatible devices. For SOI nanowires, significant spectral broadening of optical pulses in GO-coated SOI nanowires induced by self-phase modulation (SPM) is observed, achieving a high spectral broadening factor of 4.34 for a device with a patterned film including 10 layers of GO. A significant enhancement in the nonlinear figure of merit (FOM) for silicon nanowires by a factor of 20 is also achieved, resulting in a FOM > 5. For Hydex and SiN waveguides, enhanced FWM in the GO-coated waveguides is achieved, where conversion efficiency (CE) enhancements of up to 6.9 dB and 9.1 dB relative to the uncoated waveguides. For MRRs, an increase of up to ~10.3 dB in the FWM CE is achieved due to the resonant enhancement effect. These results reveal the strong potential of GO films to improve the nonlinear optics of nanowires, waveguides, and ring resonators.

physics.optics↗

arXiv2021

Integral order photonic RF and microwave signal processors based on soliton crystal Kerr micro-combs

Soliton crystal micro-combs are powerful tools as sources of multiple wavelength channels for radio frequency (RF) signal processing. They offer a compact device footprint, large numbers of wavelengths, very high versatility, and wide Nyquist bandwidths. Here, we demonstrate integral order RF signal processing functions based on a soliton crystal micro-comb, including a Hilbert transformer and first- to third-order differentiators. We compare and contrast results achieved and the tradeoffs involved with varying comb spacing, tap design methods, as well as shaping methods.

physics.app-ph↗

arXiv2021

Frequency comb distillation for optical superchannel transmission

Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To overcome this, we demonstrate wideband noise reduction for comb lines using a high-Q microring resonator whose resonances align with the comb lines, providing tight optical filtering of multiple combs lines at the same time. By distilling an optical frequency comb in this way, we are able to reduce the required comb line OSNR when these lines are used in a coherent optical communications system. Through performance tests on a 19.45-GHz-spaced comb generating 71 lines, using 18 Gbaud, 64-QAM sub-channels at a spectral efficiency of 10.6 b/s/Hz, we find that noise-corrupted comb lines can reduce the optical signal-to-noise ratio required for the comb by ~ 9 dB when used as optical carriers at the transmitter side, and by ~ 12 dB when used as a local oscillator at the receiver side. This demonstration provides a method to enable low power optical frequency combs to be able to support high bandwidth and high-capacity communications.

physics.app-ph↗

arXiv2021

Design of microring resonators integrated with 2D graphene oxide films for four-wave mixing

We theoretically investigate and optimize the performance of four-wave mixing (FWM) in microring resonators (MRRs) integrated with two-dimensional (2D) layered graphene oxide (GO) films. Owing to the interaction between the MRRs and the highly nonlinear GO films as well as to the resonant enhancement effect, the FWM efficiency in GO-coated MRRs can be significantly improved. Based on previous experiments, we perform detailed analysis for the influence of the GO film parameters and MRR coupling strength on the FWM conversion efficiency (CE) of the hybrid MRRs. By optimizing the device parameters to balance the trade-off between the Kerr nonlinearity and loss, we achieve a high CE enhancement of ~18.6 dB relative to the uncoated MRR, which is ~8.3 dB higher than previous experimental results. The influence of photo-thermal changes in the GO films as well as variations in the MRR parameters such as the ring radius and waveguide dispersion on the FWM performance is also discussed. These results highlight the significantly improved FWM performance that can be achieved in MRRs incorporating GO films and provide a guide for optimizing their FWM performance.

physics.optics↗

arXiv2021

Highly tunable broadband RF photonic fractional Hilbert transformer based on a Kerr soliton crystal microcomb source

We demonstrate an RF photonic fractional Hilbert transformer based on an integrated Kerr micro-comb source featuring a record low free spectral range of 48.9 GHz, yielding 75 microcomb lines across the C-band. By programming and shaping the comb lines according to calculated tap weights, we demonstrate that the Hilbert transformer can achieve tunable bandwidths ranging from 1.2 to 15.3 GHz, switchable centre frequencies from baseband to 9.5 GHz, and arbitrary fractional orders. We experimentally characterize the RF amplitude and phase response of the tunable bandpass and lowpass Hilbert transformers with 90 and 45-degree phase shift. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a powerful way to implement the standard as well as fractional Hilbert transformers with broad and switchable processing bandwidths and centre frequencies, together with high reconfigurability and greatly reduced size and complexity.

physics.app-ph↗

arXiv2021

Spectral Shaping with Integrated Self-Coupled Sagnac Loop Reflectors

We propose and theoretically investigate integrated photonic filters based on coupled Sagnac loop reflectors (SLRs) formed by a self-coupled wire waveguide. By tailoring coherent mode interference in the device, three different filter functions are achieved, including Fano-like resonances, wavelength interleaving, and varied resonance mode splitting. For each function, the impact of device structural parameters is analyzed to facilitate optimized performance. Our results theoretically verify the proposed device as a compact multi-functional integrated photonic filter for flexible spectral shaping.

physics.optics↗

arXiv2021

Ultra-high bandwidth fiber-optic data transmission with a single chip source

We report world record high data transmission over standard optical fiber from a single optical source. We achieve a line rate of 44.2 Terabits per second (Tb/s) employing only the C-band at 1550nm, resulting in a spectral efficiency of 10.4 bits/s/Hz. We use a new and powerful class of micro-comb called soliton crystals that exhibit robust operation and stable generation as well as a high intrinsic efficiency that, together with an extremely low spacing of 48.9 GHz enables a very high coherent data modulation format of 64 QAM. We achieve error free transmission across 75 km of standard optical fiber in the lab and over a field trial with a metropolitan optical fiber network. This work demonstrates the ability of optical micro-combs to exceed other approaches in performance for the most demanding practical optical communications applications.

physics.app-ph↗