arXiv subjects

David P. DiVincenzo

Publications and source records attributed to David P. DiVincenzo.

At least 37 records · Page 2Linked to original sources

arXiv2020

Hardware-Encoding Grid States in a Non-Reciprocal Superconducting Circuit

We present a circuit design composed of a non-reciprocal device and Josephson junctions whose ground space is doubly degenerate and the ground states are approximate codewords of the Gottesman-Kitaev-Preskill (GKP) code. We determine the low-energy dynamics of the circuit by working out the equivalence of this system to the problem of a single electron confined in a two-dimensional plane and under the effect of strong magnetic field and of a periodic potential. We find that the circuit is naturally protected against the common noise channels in superconducting circuits, such as charge and flux noise, implying that it can be used for passive quantum error correction. We also propose realistic design parameters for an experimental realization and we describe possible protocols to perform logical one- and two-qubit gates, state preparation and readout.

quant-ph↗

arXiv2019

Hamiltonian quantum computing with superconducting qubits

We consider how the Hamiltonian Quantum Computing scheme introduced in [arXiv:1509.01278] can be implemented using a 2D array of superconducting transmon qubits. We show how the scheme requires the engineering of strong attractive cross-Kerr and weak flip-flop or hopping interactions and we detail how this can be achieved. Our proposal uses a new electric circuit for obtaining the attractive cross-Kerr coupling between transmons via a dipole-like element. We discuss and numerically analyze the forward motion and execution of the computation and its dependence on coupling strengths and their variability. We extend [arXiv:1509.01278] by explicitly showing how to construct a direct Toffoli gate, thus establishing computational universality via the Hadamard and Toffoli gate or via controlled-Hadamard, Hadamard and CNOT.

quant-ph↗

arXiv2019

Optimal gauge for the multimode Rabi model in circuit QED

In circuit QED, a Rabi model can be derived by truncating the Hilbert space of the anharmonic qubit coupled to a linear, reactive environment. This truncation breaks the gauge invariance present in the full Hamiltonian. We analyze the determination of an optimal gauge such that the differences between the truncated and the full Hamiltonian are minimized. Here, we derive a simple criterion for the optimal gauge. We find that it is determined by the ratio of the anharmonicity of the qubit to an averaged environmental frequency. We demonstrate that the usual choices of flux and charge gauge are not necessarily the preferred options in the case of multiple resonator modes.

quant-ph↗

arXiv2019

Three-qubit exact Grover within the blind oracular quantum computation scheme

Here we extend the concept of blind client-server quantum computation, in which a client with limited quantum power controls the execution of a quantum computation on a powerful server, without revealing any details of the computation. Our extension is to introduce a three-node setting in which an oracular quantum computation can be executed blindly. In this Blind Oracular Quantum Computation (BOQC), the oracle (Oscar) is another node, with limited power, who acts in cooperation with the client (Alice) to supply quantum information to the server so that the oracle part of the quantum computation can also be executed blindly. We develop tests of this protocol using two- and three-qubit versions of the exact Grover algorithm (i.e., with database sizes $4\leq N\leq 8$), obtaining optimal implementations of these algorithms within a gate array scheme and the blinded cluster-state scheme. We discuss the feasibility of executing these protocols in state-of-the-art three-node experiments using NV-diamond electronic and nuclear qubits.

quant-ph↗

arXiv2019

Transmission lines and resonators based on quantum Hall plasmonics: electromagnetic field, attenuation and coupling to qubits

Quantum Hall edge states have some characteristic features that can prove useful to measure and control solid state qubits. For example, their high voltage to current ratio and their dissipationless nature can be exploited to manufacture low-loss microwave transmission lines and resonators with a characteristic impedance of the order of the quantum of resistance $h/e^2\sim 25\mathrm{kΩ}$. The high value of the impedance guarantees that the voltage per photon is high and for this reason high impedance resonators can be exploited to obtain larger values of coupling to systems with a small charge dipole, e.g. spin qubits. In this paper, we provide a microscopic analysis of the physics of quantum Hall effect devices capacitively coupled to external electrodes. The electrical current in these devices is carried by edge magnetoplasmonic excitations and by using a semiclassical model, valid for a wide range of quantum Hall materials, we discuss the spatial profile of the electromagnetic field in a variety of situations of interest. Also, we perform a numerical analysis to estimate the lifetime of these excitations and, from the numerics, we extrapolate a simple fitting formula which quantifies the $Q$ factor in quantum Hall resonators. We then explore the possibility of reaching the strong photon-qubit coupling regime, where the strength of the interaction is higher than the losses in the system. We compute the Coulomb coupling strength between the edge magnetoplasmons and singlet-triplet qubits, and we obtain values of the coupling parameter of the order $100\mathrm{MHz}$; comparing these values to the estimated attenuation in the resonator, we find that for realistic qubit designs the coupling can indeed be strong.

cond-mat.mes-hall↗

arXiv2018

Transmission Lines and Meta-Materials based on Quantum Hall Plasmonics

The characteristic impedance of a microwave transmission line is typically constrained to a value $Z_0$ = 50 $ Ω$, in-part because of the low impedance of free space and the limited range of permittivity and permeability realizable with conventional materials. Here we suggest the possibility of constructing high-impedance transmission lines by exploiting the plasmonic response of edge states associated with the quantum Hall effect in gated devices. We analyze various implementations of quantum Hall transmission lines based on distributed networks and lumped-element circuits, including a detailed account of parasitic capacitance and Coulomb drag effects, which can modify device performance. We additionally conceive of a meta-material structure comprising arrays of quantum Hall droplets and analyze its unusual properties. The realization of such structures holds promise for efficiently wiring-up quantum circuits on chip, as well as engineering strong coupling between semiconductor qubits and microwave photons.

cond-mat.mes-hall↗

arXiv2017

Simple Impedance Response Formulas for the Dispersive Interaction Rates in the Effective Hamiltonians of Low Anharmonicity Superconducting Qubits

For superconducting quantum processors consisting of low anharmonicity qubits such as transmons we give a complete microwave description of the system in the qubit subspace. We assume that the qubits are dispersively coupled to a distributed microwave structure such that the detunings of the qubits from the internal modes of the microwave structure are stronger than their couplings. We define qubit ports across the terminals of the Josephson junctions and drive ports where transmission lines carrying drive signals reach the chip and we obtain the multiport impedance response of the linear passive part of the system between the ports. We then relate interaction parameters in between qubits and between the qubits and the environment to the entries of this multiport impedance function: in particular we show that the exchange coupling rate J between qubits is related in a simple way to the off-diagonal entry connecting the qubit ports. Similarly we relate couplings of the qubits to voltage drives and lossy environment to the entries connecting the qubits and the drive ports. Our treatment takes into account all the modes (possibly infinite) that might be present in the distributed electromagnetic structure and provides an efficient method for the modeling and analysis of the circuits.

quant-ph↗

arXiv2017

Multi-Qubit Joint Measurements in Circuit QED: Stochastic Master Equation Analysis

We derive a family of stochastic master equations describing homodyne measurement of multi-qubit diagonal observables in circuit quantum electrodynamics. In the regime where qubit decay can be neglected, our approach replaces the polaron-like transformation of previous work, which required a lengthy calculation for the physically interesting case of three qubits and two resonator modes. The technique introduced here makes this calculation straightforward and manifestly correct. Using this technique, we are able to show that registers larger than one qubit evolve under a non-Markovian master equation. We perform numerical simulations of the three-qubit, two-mode case from previous work, obtaining an average post-measurement state fidelity of $\sim 94\%$, limited by measurement-induced decoherence and dephasing.

quant-ph↗

arXiv2017

Topological Quantum Computing

This set of lecture notes forms the basis of a series of lectures delivered at the 48th IFF Spring School 2017 on Topological Matter: Topological Insulators, Skyrmions and Majoranas at Forschungszentrum Juelich, Germany. The first part of the lecture notes covers the basics of abelian and non-abelian anyons and their realization in the Kitaev's honeycomb model. The second part discusses how to perform universal quantum computation using Majorana fermions.

quant-ph↗

arXiv2016

A model study of present-day Hall-effect circulators

Stimulated by the recent implementation of a three-port Hall-effect microwave circulator of Mahoney et al. (MEA), we present model studies of the performance of this device. Our calculations are based on the capacitive-coupling model of Viola and DiVincenzo (VD). Based on conductance data from a typical Hall-bar device obtained from a two-dimensional electron gas (2DEG) in a magnetic field, we numerically solve the coupled field-circuit equations to calculate the expected performance of the circulator, as determined by the $S$ parameters of the device when coupled to 50$Ω$ ports, as a function of frequency and magnetic field. Above magnetic fields of 1.5T, for which a typical 2DEG enters the quantum Hall regime (corresponding to a Landau-level filling fraction $ν$ of 20), the Hall angle $θ_H=\tan^{-1}σ_{xy}/σ_{xx}$ always remains close to $90^\circ$, and the $S$ parameters are close to the analytic predictions of VD for $θ_H=π/2$. As anticipated by VD, MEA find the device to have rather high (k$Ω$) impedance, and thus to be extremely mismatched to $50Ω$, requiring the use of impedance matching. We incorporate the lumped matching circuits of MEA in our modeling and confirm that they can produce excellent circulation, although confined to a very small bandwidth. We predict that this bandwidth is significantly improved by working at lower magnetic field when the Landau index is high, e.g. $ν=20$, and the impedance mismatch is correspondingly less extreme. Our modeling also confirms the observation of MEA that parasitic port-to-port capacitance can produce very interesting countercirculation effects.

cond-mat.mes-hall↗

arXiv2016

Self impedance matched Hall-effect gyrators and circulators

We present a model study of an alternative implementation of a two-port Hall-effect microwave gyrator. Our set-up involves three electrodes, one of which acts as a common ground for the others. Based on the capacitive-coupling model of Viola and DiVincenzo, we analyze the performance of the device and we predict that ideal gyration can be achieved at specific frequencies. Interestingly, the impedance of the three-terminal gyrator can be made arbitrarily small for certain coupling strengths, so that no auxiliary impedance matching is required. Although the bandwidth of the device shrinks as the impedance decreases, it can be improved by reducing the magnetic field; it can be realistically increased up to $ 150 \mathrm{MHz}$ at $50\mathrmΩ$ by working at filling factor $ν=10$. We examine also the effects of the parasitic capacitive coupling between electrodes and we find that, although in general they strongly influence the response of device, their effect is negligible at low impedance. Finally, we analyze an interferometric implementation of a circulator, which incorporates the gyrator in a Mach-Zender-like construction. Perfect circulation in both directions can be achieved, depending on frequency and on the details of the interferometer.

cond-mat.mes-hall↗

arXiv2015

Methodology for bus layout for topological quantum error correcting codes

Most quantum computing architectures can be realized as two-dimensional lattices of qubits that interact with each other. We take transmon qubits and transmission line resonators as promising candidates for qubits and couplers; we use them as basic building elements of a quantum code. We then propose a simple framework to determine the optimal experimental layout to realize quantum codes. We show that this engineering optimization problem can be reduced to the solution of standard binary linear programs. While solving such programs is a NP-hard problem, we propose a way to find scalable optimal architectures that require solving the linear program for a restricted number of qubits and couplers. We apply our methods to two celebrated quantum codes, namely the surface code and the Fibonacci code.

cond-mat.mes-hall↗

arXiv2015

Monte Carlo studies of the properties of the Majorana quantum error correction code: is self-correction possible during braiding?

The Majorana code is an example of a stabilizer code where the quantum information is stored in a system supporting well-separated Majorana Bound States (MBSs). We focus on one-dimensional realizations of the Majorana code, as well as networks of such structures, and investigate their lifetime when coupled to a parity-preserving thermal environment. We apply the Davies prescription, a standard method that describes the basic aspects of a thermal environment, and derive a master equation in the Born-Markov limit. We first focus on a single wire with immobile MBSs and perform error correction to annihilate thermal excitations. In the high-temperature limit, we show both analytically and numerically that the lifetime of the Majorana qubit grows logarithmically with the size of the wire. We then study a trijunction with four MBSs when braiding is executed. We study the occurrence of dangerous error processes that prevent the lifetime of the Majorana code from growing with the size of the trijunction. The origin of the dangerous processes is the braiding itself, which separates pairs of excitations and renders the noise nonlocal; these processes arise from the basic constraints of moving MBSs in 1D structures. We confirm our predictions with Monte Carlo simulations in the low-temperature regime, i.e. the regime of practical relevance. Our results put a restriction on the degree of self-correction of this particular 1D topological quantum computing architecture.

cond-mat.mes-hall↗

arXiv2015

Majorana braiding with thermal noise

We investigate the self-correcting properties of a network of Majorana wires, in the form of a trijunction, in contact with a parity-preserving thermal environment. As opposed to the case where Majorana bound states (MBSs) are immobile, braiding MBSs within a trijunction introduces dangerous error processes that we identify. Such errors prevent the lifetime of the memory from increasing with the size of the system. We confirm our predictions with Monte Carlo simulations. Our findings put a restriction on the degree of self-correction of this specific quantum computing architecture.

cond-mat.mes-hall↗

arXiv2015

Simple operation sequences to couple and interchange quantum information between spin qubits of different kinds

Efficient operation sequences to couple and interchange quantum information between quantum dot spin qubits of different kinds are derived using exchange interactions. In the qubit encoding of a single-spin qubit, a singlet-triplet qubit, and an exchange-only (triple-dot) qubit, some of the single-qubit interactions remain on during the entangling operation; this greatly simplifies the operation sequences that construct entangling operations. In the ideal setup, the gate operations use the intra-qubit exchange interactions only once. The limitations of the entangling sequences are discussed, and it is shown how quantum information can be converted between different kinds of quantum dot spin qubits.

cond-mat.mes-hall↗

arXiv2015

Multiport Impedance Quantization

With the increase of complexity and coherence of superconducting systems made using the principles of circuit quantum electrodynamics, more accurate methods are needed for the characterization, analysis and optimization of these quantum processors. Here we introduce a new method of modelling that can be applied to superconducting structures involving multiple Josephson junctions, high-Q superconducting cavities, external ports, and voltage sources. Our technique, an extension of our previous work on single-port structures [1], permits the derivation of system Hamiltonians that are capable of representing every feature of the physical system over a wide frequency band and the computation of T1 times for qubits. We begin with a black box model of the linear and passive part of the system. Its response is given by its multiport impedance function Zsim(w), which can be obtained using a finite-element electormagnetics simulator. The ports of this black box are defined by the terminal pairs of Josephson junctions, voltage sources, and 50 Ohm connectors to high-frequency lines. We fit Zsim(w) to a positive-real (PR) multiport impedance matrix Z(s), a function of the complex Laplace variable s. We then use state-space techniques to synthesize a finite electric circuit admitting exactly the same impedance Z(s) across its ports; the PR property ensures the existence of this finite physical circuit. We compare the performance of state-space algorithms to classical frequency domain methods, justifying their superiority in numerical stability. The Hamiltonian of the multiport model circuit is obtained by using existing lumped element circuit quantization formalisms [2, 3]. Due to the presence of ideal transformers in the model circuit, these quantization methods must be extended, requiring the introduction of an extension of the Kirchhoff voltage and current laws.

quant-ph↗

arXiv2015

Validity of the single-particle description and charge noise resilience for multielectron quantum dots

We construct an optimal set of single-particle states for few-electron quantum dots (QDs) using the method of natural orbitals (NOs). The NOs include also the effects of the Coulomb repulsion between electrons. We find that they agree well with the noniteracting orbitals for GaAs QDs of realistic parameters, while the Coulomb interactions only rescale the radius of the NOs compared to the noninteracting case. We use NOs to show that four-electron QDs are less susceptible to charge noise than their two-electron counterparts.

cond-mat.mes-hall↗

arXiv2015

Fault-Tolerant Quantum Computation for Singlet-Triplet Qubits with Leakage Errors

We describe and analyze leakage errors of singlet-triplet qubits. Even though leakage errors are a natural problem for spin qubits encoded using quantum dot arrays, they have obtained little attention in previous studies. We describe the realization of leakage correction protocols that can be implemented together with the quantum error correction protocol of the surface code. Furthermore we construct explicit leakage reduction units that need, in the ideal setup, as few as three manipulation steps. Our study shows that leakage errors can be corrected without the need of measurements and at the cost of only a few additional ancilla qubits and gate operations compared to standard quantum error correction codes.

quant-ph↗