arXiv subjects

David P. DiVincenzo

Publications and source records attributed to David P. DiVincenzo.

At least 55 records · Page 3Linked to original sources

arXiv2014

Inverted Singlet-Triplet Qubit Coded on a Two-Electron Double Quantum Dot

The $s_z=0$ spin configuration of two electrons confined at a double quantum dot (DQD) encodes the singlet-triplet qubit (STQ). We introduce the inverted STQ (ISTQ) that emerges from the setup of two quantum dots (QDs) differing significantly in size and out-of-plane magnetic fields. The strongly confined QD has a two-electron singlet ground state, but the weakly confined QD has a two-electron triplet ground state in the $s_z=0$ subspace. Spin-orbit interactions act nontrivially on the $s_z=0$ subspace and provide universal control of the ISTQ together with electrostatic manipulations of the charge configuration. GaAs and InAs DQDs can be operated as ISTQs under realistic noise conditions.

cond-mat.mes-hall↗

arXiv2014

Noise-Protected Gate for Six-Electron Double-Dot Qubits

Singlet-triplet spin qubits in six-electron double quantum dots, in moderate magnetic fields, can show superior immunity to charge noise. This immunity results from the symmetry of orbitals in the second energy shell of circular quantum dots: singlet and triplet states in this shell have identical charge distributions. Our phase-gate simulations, which include $1/f$ charge noise from fluctuating traps, show that this symmetry is most effectively exploited if the gate operation switches rapidly between sweet spots deep in the (3,3) and (4,2) charge stability regions; fidelities very close to one are predicted if subnanosecond switching can be performed.

cond-mat.mes-hall↗

arXiv2014

Two-Qubit Couplings of Singlet-Triplet Qubits Mediated by One Quantum State

We describe high-fidelity entangling gates between singlet-triplet qubits (STQs) which are coupled via one quantum state (QS). The QS can be provided by a quantum dot itself or by another confined system. The orbital energies of the QS are tunable using an electric gate close to the QS, which changes the interactions between the STQs independent of their single-qubit parameters. Short gating sequences exist for the controlled NOT (CNOT) operations. We show that realistic quantum dot setups permit excellent entangling operations with gate infidelities below $10^{-3}$, which is lower than the quantum error correction threshold of the surface code. We consider limitations from fabrication errors, hyperfine interactions, spin-orbit interactions, and charge noise in GaAs and Si heterostructures.

cond-mat.mes-hall↗

arXiv2014

Blackbox Quantization of Superconducting Circuits using exact Impedance Synthesis

We propose a new quantization method for superconducting electronic circuits involving a Josephson junction device coupled to a linear microwave environment. The method is based on an exact impedance synthesis of the microwave environment considered as a blackbox with impedance function Z(s). The synthesized circuit captures dissipative dynamics of the system with resistors coupled to the reactive part of the circuit in a non-trivial way. We quantize the circuit and compute relaxation rates following previous formalisms for lumped element circuit quantization. Up to the errors in the fit our method gives an exact description of the system and its losses.

quant-ph↗

arXiv2014

Hall Effect Gyrators and Circulators

The electronic circulator, and its close relative the gyrator, are invaluable tools for noise management and signal routing in the current generation of low-temperature microwave systems for the implementation of new quantum technologies. The current implementation of these devices using the Faraday effect is satisfactory, but requires a bulky structure whose physical dimension is close to the microwave wavelength employed. The Hall effect is an alternative non-reciprocal effect that can also be used to produce desired device functionality. We review earlier efforts to use an ohmically-contacted four-terminal Hall bar, explaining why this approach leads to unacceptably high device loss. We find that capacitive coupling to such a Hall conductor has much greater promise for achieving good circulator and gyrator functionality. We formulate a classical Ohm-Hall analysis for calculating the properties of such a device, and show how this classical theory simplifies remarkably in the limiting case of the Hall angle approaching 90 degrees. In this limit we find that either a four-terminal or a three-terminal capacitive device can give excellent circulator behavior, with device dimensions far smaller than the a.c. wavelength. An experiment is proposed to achieve GHz-band gyration in millimetre (and smaller) scale structures employing either semiconductor heterostructure or graphene Hall conductors. An inductively coupled scheme for realising a Hall gyrator is also analysed.

cond-mat.mes-hall↗

arXiv2013

Stochastic Master Equation Analysis of Optimized Three-Qubit Nondemolition Parity Measurement

We analyze a direct parity measurement of the state of three superconducting qubits in circuit quantum electrodynamics. The parity is inferred from a homodyne measurement of the reflected/transmitted microwave radiation and the measurement is direct in the sense that the parity is measured without the need for any quantum circuit operations or for ancilla qubits. Qubits are coupled to two resonant cavity modes, allowing the steady state of the emitted radiation to satisfy the necessary conditions to act as a pointer state for the parity. However, the transient dynamics violates these conditions and we analyze this detrimental effect and show that it can be overcome in the limit of weak measurement signal. Our analysis shows that, with a moderate degree of post-selection, it is possible to achieve post-measurement states with fidelity of order 95%. We believe that this type of measurement could serve as a benchmark for future error-correction protocols in a scalable architecture.

quant-ph↗

arXiv2013

Noise Analysis of Qubits Implemented in Triple Quantum Dot Systems in a Davies Master Equation Approach

We analyze the influence of noise for qubits implemented using a triple quantum dot spin system. We give a detailed description of the physical realization and develop error models for the dominant external noise sources. We use a Davies master equation approach to describe their influence on the qubit. The triple dot system contains two meaningful realizations of a qubit: We consider a subspace and a subsystem of the full Hilbert space to implement the qubit. We test the robustness of these two implementations with respect to the qubit stability. When performing the noise analysis, we extract the initial time evolution of the qubit using a Nakajima-Zwanzig approach. We find that the initial time evolution, which is essential for qubit applications, decouples from the long time dynamics of the system. We extract probabilities for the qubit errors of dephasing, relaxation and leakage. Using the Davies model to describe the environment simplifies the noise analysis. It allows us to construct simple toy models, which closely describe the error probabilities.

cond-mat.mes-hall↗

arXiv2013

Multi-qubit parity measurement in circuit quantum electrodynamics

We present a concept for performing direct parity measurements on three or more qubits in microwave structures with superconducting resonators coupled to Josephson-junction qubits. We write the quantum-eraser conditions that must be fulfilled for the parity measurements as requirements for the scattering phase shift of our microwave structure. We show that these conditions can be fulfilled with present-day devices. We present one particular scheme, implemented with two-dimensional cavity techniques, in which each qubit should be coupled equally to two different microwave cavities. The magnitudes of the couplings that are needed are in the range that has been achieved in current experiments. A quantum calculation indicates that the measurement is optimal if the scattering signal can be measured with near single photon sensitivity. A comparison with an extension of a related proposal from cavity optics is presented. We present a second scheme, for which a scalable implementation of the four-qubit parities of the surface quantum error correction code can be envisioned. It uses three-dimensional cavity structures, using cavity symmetries to achieve the necessary multiple resonant modes within a single resonant structure.

quant-ph↗

arXiv2012

From Majorana Fermions to Topological Order

We consider a system consisting of a 2D network of links between Majorana fermions on superconducting islands. We show that the fermionic Hamiltonian modeling this system is topologically-ordered in a region of parameter space. In particular we show that Kitaev's toric code emerges in fourth-order perturbation theory. By using a Jordan-Wigner transformation we can map the model onto a family of signed 2D Ising models in a transverse field where the signs (FM or AFM) are determined by additional gauge bits. Our mapping allows an understanding of the non-perturbative regime and the phase transition to a non-topological phase. We discuss the physics behind a possible implementation of this model and argue how it can be used for topological quantum computation by adiabatic changes in the Hamiltonian.

quant-ph↗

arXiv2011

Nonlinear spectroscopy of superconducting anharmonic resonators

We formulate a model for the steady state response of a nonlinear quantum oscillator structure, such as those used in a variety of superconducting qubit experiments, when excited by a steady, but not necessarily small, ac tone. We show that this model can be derived directly from a circuit description of some recent qubit experiments in which the state of the qubit is read out directly, without a SQUID magnetometer. The excitation profile has a rich structure depending on the detuning of the tone from the small-signal resonant frequency, on the degree of damping, and on the excitation amplitude. We explore two regions in detail: First, at high damping there is a trough in the excitation response as a function of detuning, near where the classical Duffing bifurcation occurs. This trough has been understood as a classical interference between two metastable responses with opposite phase. We use Wigner function studies to show that while this picture is roughly correct, there are also more quantum mechanical aspects to this feature. Second, at low damping we study the emergence of sharp, discrete spectral features from a continuum response. We show that these the structures, associated with discrete transitions between different excited-state eigenstates of the oscillator, provide an interesting example of a quantum Fano resonance. The trough in the Fano response evolves continuously from the "classical" trough at high damping.

quant-ph↗

arXiv2010

High coherence hybrid superconducting qubit

We measure the coherence of a new superconducting qubit, the {\em low-impedance flux qubit}, finding $T_2^* \sim T_1 \sim 1.5μ$s. It is a three-junction flux qubit, but the ratio of junction critical currents is chosen to make the qubit's potential have a single well form. The low impedance of its large shunting capacitance protects it from decoherence. This qubit has a moderate anharmonicity, whose sign is reversed compared with all other popular qubit designs. The qubit is capacitively coupled to a high-Q resonator in a $λ/2$ configuration, which permits the qubit's state to be read out dispersively.

cond-mat.supr-con↗

arXiv2010

Exploiting Kerr Cross Non-linearity in Circuit Quantum Electrodynamics for Non-demolition Measurements

We propose a scheme for dispersive readout of stored energy in one mode of a nonlinear superconducting microwave ring resonator by detection of the frequency shift of a second mode coupled to the first via a Kerr nonlinearity. Symmetry is used to enhance the device responsivity while minimizing self nonlinearity of each mode. Assessment of the signal to noise ratio indicates that the scheme will function at the single photon level, allowing quantum non-demolition measurement of the photon number state of one mode. Experimental data from a simplified version of the device demonstrating the principle of operation are presented.

cond-mat.mes-hall↗

arXiv2010

Superconducting resonators as beam splitters for linear-optics quantum computation

A functioning quantum computer will be a machine that builds up, in a programmable way, nonclassical correlations in a multipartite quantum system. Linear optics quantum computation (LOQC) is an approach for achieving this function that requires only simple, reliable linear optical elements, namely beam splitters and phase shifters. Nonlinear optics is only required in the form of single-photon sources for state initialization, and detectors. However, the latter remain difficult to achieve with high fidelity. A new setting for quantum optics has arisen in circuit quantum electrodynamics (cQED) using superconducting (SC) quantum devices, and opening up the way to LOQC using microwave, rather than visible photons. Much progress is being made in SC qubits and cQED: high-fidelity Fock state generation and qubit measurements provide single photon sources and detection. Here we show that the LOQC toolkit in cQED can be completed with high-fidelity (>99.92%) linear optical elements.

cond-mat.mes-hall↗

arXiv2009

Fault tolerant architectures for superconducting qubits

In this short review, I draw attention to new developments in the theory of fault tolerance in quantum computation that may give concrete direction to future work in the development of superconducting qubit systems. The basics of quantum error correction codes, which I will briefly review, have not significantly changed since their introduction fifteen years ago. But an interesting picture has emerged of an efficient use of these codes that may put fault tolerant operation within reach. It is now understood that two dimensional surface codes, close relatives of the original toric code of Kitaev, can be adapted to effectively perform logical gate operations in a very simple planar architecture, with error thresholds for fault tolerant operation simulated to be 0.75%. This architecture uses topological ideas in its functioning, but it is not 'topological quantum computation' -- there are no non-abelian anyons in sight. I offer some speculations on the crucial pieces of superconducting hardware that could be demonstrated in the next couple of years that would be clear stepping stones towards this surface-code architecture.

quant-ph↗

arXiv2009

A comparative code study for quantum fault-tolerance

We study a comprehensive list of quantum codes as candidates of codes to be used at the bottom, physical, level in a fault-tolerant code architecture. Using the Aliferis-Gottesman-Preskill (AGP) ex-Rec method we calculate the pseudo-threshold for these codes against depolarizing noise at various levels of overhead. We estimate the logical noise rate as a function of overhead at a physical error rate of $p_0=1\times 10^{-4}$. The Bacon-Shor codes and the Golay code are the best performers in our study.

quant-ph↗

arXiv2009

Fault-Tolerant Computing With Biased-Noise Superconducting Qubits

We present a universal scheme of pulsed operations for the IBM oscillator-stabilized flux qubit comprising the CPHASE gate, single-qubit preparations and measurements. Based on numerical simulations, we argue that the error rates for these operations can be as low as about .5% and that noise is highly biased, with phase errors being stronger than all other types of errors by a factor of nearly 10^3. In contrast, the design of a CNOT gate for this system with an error rate of less than about 1.2% seems extremely challenging. We propose a special encoding which exploits the noise bias allowing us to implement a logical CNOT gate where phase errors and all other types of errors have nearly balanced rates of about .4%. Our results illustrate how the design of an encoding scheme can be adjusted and optimized according to the available physical operations and the particular noise characteristics of experimental devices.

quant-ph↗

arXiv2008

Efficient one- and two-qubit pulsed gates for an oscillator stabilized Josephson qubit

We present theoretical schemes for performing high-fidelity one- and two-qubit pulsed gates for a superconducting flux qubit. The "IBM qubit" consists of three Josephson junctions, three loops, and a superconducting transmission line. Assuming a fixed inductive qubit-qubit coupling, we show that the effective qubit-qubit interaction is tunable by changing the applied fluxes, and can be made negligible, allowing one to perform high fidelity single qubit gates. Our schemes are tailored to alleviate errors due to 1/f noise; we find gates with only 1% loss of fidelity due to this source, for pulse times in the range of 20-30ns for one-qubit gates (Z rotations, Hadamard), and 60ns for a two-qubit gate (controlled-Z). Our relaxation and dephasing time estimates indicate a comparable loss of fidelity from this source. The control of leakage plays an important role in the design of our shaped pulses, preventing shorter pulse times. However, we have found that imprecision in the control of the quantum phase plays the major role in the limitation of the fidelity of our gates.

quant-ph↗

arXiv2008

Simulation of Many-Body Hamiltonians using Perturbation Theory with Bounded-Strength Interactions

We show how to map a given n-qubit target Hamiltonian with bounded-strength k-body interactions onto a simulator Hamiltonian with two-body interactions, such that the ground-state energy of the target and the simulator Hamiltonians are the same up to an extensive error O(epsilon n) for arbitrary small epsilon. The strength of interactions in the simulator Hamiltonian depends on epsilon and k but does not depend on n. We accomplish this reduction using a new way of deriving an effective low-energy Hamiltonian which relies on the Schrieffer-Wolff transformation of many-body physics.

quant-ph↗