arXiv subjects

David P. Pappas

Publications and source records attributed to David P. Pappas.

At least 19 recordsLinked to original sources

arXiv2026

Scaling Alternating-Bias-Assisted Annealing for Precision Transmon Frequency Targeting on Superconducting Quantum Processors

Recent advances in the alternating-bias-assisted annealing (ABAA) technique have successfully mitigated intrinsic Josephson-junction (JJ) fabrication variations. This new technique enables precision qubit frequency tuning alongside simplicity. However, it is critical to enhance tuning throughput and yield while investigating the factors that drive targeting performance as the technology scales. Here, we characterize ABAA tuning performance within a 150-mm wafer process flow and extend this technique to simultaneous, multi-channel tuning, demonstrating that a wafer-scale JJ resistance tuning precision of $\sigma=0.50\pm0.05\%$ alongside a component-level yield of $\ge 98.8\%$ can be achieved. Furthermore, we demonstrate a strong correlation between yield, tuning speed, and junction breakdown voltage, establishing the latter as a vital process control parameter for meeting production goals. Finally, we demonstrate a successful implementation of ABAA tuning on a quad-module quantum processor (Rigetti Cepheus-1-36Q), where we achieve an empirical frequency targeting precision of $\sigma \sim 30\text{ MHz}$ in both qubit and qubit-qubit detuning frequencies, contributing to high median two-qubit gate fidelities. These results confirm the efficacy and scalability of ABAA for high-precision Hamiltonian targeting, a critical enabler for modular superconducting quantum processor technology.

quant-ph↗

arXiv2026

Automating detection of Two-Level Systems in Superconducting Qubits

Microscopic two-level system (TLS) defects remain a primary mechanism of decoherence and operational instability in superconducting transmon qubits, necessitating scalable and automated methods for their characterization. Here, we present and benchmark two complementary analysis pipelines for extracting TLS statistics directly from time-resolved SWAP spectroscopy: one-dimensional decay-rate fitting (1D-DRF), which detects defects via localized enhancements in the qubit relaxation rate, and a deterministic, non-parametric computer-vision framework (2D-CV) that achieves two-dimensional spectral localization by exploiting the temporal persistence of coherent population suppression. We deploy both methods on SWAP spectroscopy measurements from 52 flux-tunable transmon qubits on Rigetti processors with and without moderate ($\sim 10\%$) post-fabrication frequency trimming via Alternating-Bias Assisted Annealing (ABAA). We show that both pipelines converge on a consistent global characterization of the defect landscape while exhibiting complementary sensitivity across distinct coupling regimes. Crucially, both methods independently reveal a count--loss decoupling under moderate annealing: while the total detectable TLS defect density remains statistically unchanged, the span-integrated dielectric loss is reduced by approximately a factor of two, demonstrating selective suppression of the most strongly dissipative defect channels. These results establish an automated, non-parametric analysis framework for high-throughput hardware diagnostics and provide a statistical baseline for post-fabrication defect engineering in large-scale superconducting quantum processors.

quant-ph↗

arXiv2026

Magneto-optical study of Nb thin films for superconducting qubits

Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g., two-level systems, TLS) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, $j_{c}$, in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract $j_{c}$ and correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

cond-mat.supr-con↗

arXiv2025

Fabrication and Structural Analysis of Trilayers for Tantalum Josephson Junctions with Ta$_2$O$_5$ Barriers

Tantalum (Ta) has emerged as a promising low-loss material, enabling record coherence times in superconducting qubits. This enhanced performance is largely attributed to its stable native oxide, which may host fewer two-level system (TLS) defects, which are the key contributors to decoherence in superconducting circuits. Nevertheless, aluminum oxide remains the predominant choice for Josephson junction (JJ) barriers in most qubit architectures. Here, we investigate techniques for forming high-quality oxide layers on $\alpha$-phase tantalum films to develop tantalum-oxide JJ barriers. We explore thermal oxidation in a tube furnace, rapid thermal annealing, and plasma oxidation of both room-temperature and heated Ta films, characterize the resulting structures using X-ray techniques and electron microscopy, and propose a mechanistic picture of the oxidation pathways. We find that plasma oxidation provides the smoothest Ta$_2$O$_5$ layers, is compatible with in situ Ta deposition, and offers thickness control through the annealing temperature, advantageous for JJ fabrication. Lastly, we evaluate methods for growing Ta/TaO$_x$/Ta trilayers. All trilayers showed c-axis-oriented columnar growth of the bottom Ta layer, with sapphire substrates producing larger, better-aligned grains yet higher dislocation densities than silicon. Nucleation of c-axis-oriented $\alpha$-Ta on tantalum-oxide required an Nb seed layer, as direct Ta deposition yielded amorphous Ta. These results demonstrate the feasibility of $\alpha$-Ta/Nb/TaO$_x$/$\alpha$-Ta stacks for JJs with clean interfaces.

cond-mat.supr-con↗

arXiv2025

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

quant-ph↗

arXiv2024

Alternating Bias Assisted Annealing of Amorphous Oxide Tunnel Junctions

We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongly temperature-dependent, and is independent of junction size in the sub-micron regime. In order to measure their tunneling properties at mK temperatures, we characterized transmon qubit junctions treated with this alternating-bias assisted annealing (ABAA) technique. The measured frequencies follow the Ambegaokar-Baratoff relation between the shifted resistance and critical current. Further, these studies show a reduction of junction-contributed loss on the order of $\approx 2 \times10^{-6}$, along with a significant reduction in resonant- and off-resonant-two level system defects when compared to untreated samples. Imaging with high-resolution TEM shows that the barrier is still predominantly amorphous with a more uniform distribution of aluminum coordination across the barrier relative to untreated junctions. This new approach is expected to be widely applicable to a broad range of devices that rely on amorphous aluminum oxide, as well as the many other metal-insulator-metal structures used in modern electronics.

physics.app-ph↗

arXiv2024

Precision frequency tuning of tunable transmon qubits using alternating-bias assisted annealing

Superconducting quantum processors are one of the leading platforms for realizing scalable fault-tolerant quantum computation (FTQC). The recent demonstration of post-fabrication tuning of Josephson junctions using alternating-bias assisted annealing (ABAA) technique and a reduction in junction loss after ABAA illuminates a promising path towards precision tuning of qubit frequency while maintaining high coherence. Here, we demonstrate precision tuning of the maximum $|0\rangle\rightarrow |1\rangle$ transition frequency ($f_{01}^{\rm max}$) of tunable transmon qubits by performing ABAA at room temperature using commercially available test equipment. We characterize the impact of junction relaxation and aging on resistance spread after tuning, and demonstrate a frequency equivalent tuning precision of 7.7 MHz ($0.17\%$) based on targeted resistance tuning on hundreds of qubits, with a resistance tuning range up to $18.5\%$. Cryogenic measurements on tuned and untuned qubits show evidence of improved coherence after ABAA with no significant impact on tunability. Despite a small global offset, we show an empirical $f_{01}^{\rm max}$ tuning precision of 18.4 MHz by tuning a set of multi-qubit processors targeting their designed Hamiltonians. We experimentally characterize high-fidelity parametric resonance iSWAP gates on two ABAA-tuned 9-qubit processors with fidelity as high as $99.51\pm 0.20\%$. On the best-performing device, we measured across the device a median fidelity of $99.22\%$ and an average fidelity of $99.13\pm 0.12 \%$. Yield modeling analysis predicts high detuning-edge-yield using ABAA beyond the 1000-qubit scale. These results demonstrate the cutting-edge capability of frequency targeting using ABAA and open up a new avenue to systematically improving Hamiltonian targeting and optimization for scaling high-performance superconducting quantum processors.

quant-ph↗

arXiv2024

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes.

quant-ph↗

arXiv2023

Implementing two-qubit gates at the quantum speed limit

The speed of elementary quantum gates, particularly two-qubit gates, ultimately sets the limit on the speed at which quantum circuits can operate. In this work, we experimentally demonstrate commonly used two-qubit gates at nearly the fastest possible speed allowed by the physical interaction strength between two superconducting transmon qubits. We achieve this quantum speed limit by implementing experimental gates designed using a machine learning inspired optimal control method. Importantly, our method only requires the single-qubit drive strength to be moderately larger than the interaction strength to achieve an arbitrary two-qubit gate close to its analytical speed limit with high fidelity. Thus, the method is applicable to a variety of platforms including those with comparable single-qubit and two-qubit gate speeds, or those with always-on interactions. We expect our method to offer significant speedups for non-native two-qubit gates that are typically achieved with a long sequence of single-qubit and native two-qubit gates.

quant-ph↗

arXiv2022

Towards merged-element transmons using silicon fins: the FinMET

A merged-element transmon (MET) device, based on silicon (Si) fins, is proposed and the first steps to form such a "FinMET" are demonstrated. This new application of fin technology capitalizes on the anisotropic etch of Si(111) relative to Si(110) to define atomically flat, high aspect ratio Si tunnel barriers with epitaxial superconductor contacts on the parallel side-wall surfaces. This process circumvents the challenges associated with the growth of low-loss insulating barriers on lattice matched superconductors. By implementing low-loss, intrinsic float-zone Si as the barrier material rather than commonly used, potentially lossy AlOx, the FinMET is expected to overcome problems with standard transmons by (1) reducing dielectric losses, (2) minimizing the formation of two-level system spectral features, (3) exhibiting greater control over barrier thickness and qubit frequency spread, especially when combined with commercial fin fabrication and atomic-layer digital etching; (4) potentially reducing the footprint by several orders of magnitude; and (5) allowing scalable fabrication. Here, as a first step to making such a device, the fabrication of Si fin capacitors on Si(110) substrates with shadow-deposited Al electrodes is demonstrated. These fin capacitors are then fabricated into lumped element resonator circuits and probed using low-temperature microwave measurements. Further thinning of silicon junctions towards the tunneling regime will enable the scalable fabrication of FinMET devices based on existing silicon technology, while simultaneously avoiding lossy amorphous dielectrics for the tunnel barriers.

quant-ph↗

arXiv2021

Measurement of electric-field noise from interchangeable samples with a trapped-ion sensor

We demonstrate the use of a single trapped ion as a sensor to probe electric-field noise from interchangeable test surfaces. As proof of principle, we measure the magnitude and distance dependence of electric-field noise from two ion-trap-like samples with patterned Au electrodes. This trapped-ion sensor could be combined with other surface characterization tools to help elucidate the mechanisms that give rise to electric-field noise from ion-trap surfaces. Such noise presents a significant hurdle for performing large-scale trapped-ion quantum computations.

physics.atom-ph↗

arXiv2021

TOF-SIMS Analysis of Decoherence Sources in Nb Superconducting Resonators

Superconducting qubits have emerged as a potentially foundational platform technology for addressing complex computational problems deemed intractable with classical computing. Despite recent advances enabling multiqubit designs that exhibit coherence lifetimes on the order of hundreds of $μ$s, material quality and interfacial structures continue to curb device performance. When niobium is deployed as the superconducting material, two-level system defects in the thin film and adjacent dielectric regions introduce stochastic noise and dissipate electromagnetic energy at the cryogenic operating temperatures. In this study, we utilize time-of-flight secondary ion mass spectrometry (TOF-SIMS) to understand the role specific fabrication procedures play in introducing such dissipation mechanisms in these complex systems. We interrogated Nb thin films and transmon qubit structures fabricated by Rigetti Computing and at the National Institute of Standards and Technology through slight variations in the processing and vacuum conditions. We find that when Nb film is sputtered onto the Si substrate, oxide and silicide regions are generated at various interfaces. We also observe that impurity species such as niobium hydrides and carbides are incorporated within the niobium layer during the subsequent lithographic patterning steps. The formation of these resistive compounds likely impact the superconducting properties of the Nb thin film. Additionally, we observe the presence of halogen species distributed throughout the patterned thin films. We conclude by hypothesizing the source of such impurities in these structures in an effort to intelligently fabricate superconducting qubits and extend coherence times moving forward.

physics.app-ph↗

arXiv2021

Building a Quantum Engineering Undergraduate Program

The rapidly growing quantum information science and engineering (QISE) industry will require both quantum-aware and quantum-proficient engineers at the bachelor's level. We provide a roadmap for building a quantum engineering education program to satisfy this need. For quantum-aware engineers, we describe how to design a first quantum engineering course accessible to all STEM students. For the education and training of quantum-proficient engineers, we detail both a quantum engineering minor accessible to all STEM majors, and a quantum track directly integrated into individual engineering majors. We propose that such programs typically require only three or four newly developed courses that complement existing engineering and science classes available on most larger campuses. We describe a conceptual quantum information science course for implementation at any post-secondary institution, including community colleges and military schools. QISE presents extraordinary opportunities to work towards rectifying issues of inclusivity and equity that continue to be pervasive within engineering. We present a plan to do so and describe how quantum engineering education presents an excellent set of education research opportunities. Finally, we outline a hands-on training plan on quantum hardware, a key component of any quantum engineering program, with a variety of technologies including optics, atoms and ions, cryogenic and solid-state technologies, nanofabrication, and control and readout electronics. Our recommendations provide a flexible framework that can be tailored for academic institutions ranging from teaching and undergraduate-focused two- and four-year colleges to research-intensive universities.

physics.ed-ph↗

arXiv2021

Gate-free state preparation for fast variational quantum eigensolver simulations: ctrl-VQE

The variational quantum eigensolver (VQE) is currently the flagship algorithm for solving electronic structure problems on near-term quantum computers. This hybrid quantum/classical algorithm involves implementing a sequence of parameterized gates on quantum hardware to generate a target quantum state, and then measuring the expectation value of the molecular Hamiltonian. Due to finite coherence times and frequent gate errors, the number of gates that can be implemented remains limited on current quantum devices, preventing accurate applications to systems with significant entanglement, such as strongly correlated molecules. In this work, we propose an alternative algorithm (which we refer to as ctrl-VQE) where the quantum circuit used for state preparation is removed entirely and replaced by a quantum control routine which variationally shapes a pulse to drive the initial Hartree-Fock state to the full CI target state. As with VQE, the objective function optimized is the expectation value of the qubit-mapped molecular Hamiltonian. However, by removing the quantum circuit, the coherence times required for state preparation can be drastically reduced by directly optimizing the pulses. We demonstrate the potential of this method numerically by directly optimizing pulse shapes which accurately model the dissociation curves of the hydrogen molecule (covalent bond) and helium hydride ion (ionic bond), and we compute the single point energy for LiH with four transmons.

quant-ph↗

arXiv2021

A universal quantum gate set for transmon qubits with strong ZZ interactions

High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time $t_g=53.8$ ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.

quant-ph↗

arXiv2021

Universal Dephasing Noise Injection via Schrodinger Wave Autoregressive Moving Average Models

We present and validate a novel method for noise injection of arbitrary spectra in quantum circuits that can be applied to any system capable of executing arbitrary single qubit rotations, including cloud-based quantum processors. As the consequences of temporally-correlated noise on the performance of quantum algorithms are not well understood, the capability to engineer and inject such noise in quantum systems is paramount. To date, noise injection capabilities have been limited and highly platform specific, requiring low-level access to control hardware. We experimentally validate our universal method by comparing to a direct hardware-based noise-injection scheme, using a combination of quantum noise spectroscopy and classical signal analysis to show that the two approaches agree. These results showcase a highly versatile method for noise injection that can be utilized by theoretical and experimental researchers to verify, evaluate, and improve quantum characterization protocols and quantum algorithms for sensing and computing.

quant-ph↗

arXiv2020

Epitaxial Al/GaAs/Al tri-layers fabricated using a novel wafer-bonding technique

Epitaxial Al/GaAs/Al structures having controlled thickness of high-quality GaAs and pristine interfaces have been fabricated using a wafer-bonding technique. III-V semiconductor/Al structures are grown by molecular beam epitaxy on III-V semiconductor substrates and bonded to silicon and sapphire. Selective etching is used to remove the III-V substrate followed by surface cleaning and superconductor regrowth, resulting in epitaxial Al/GaAs/Al tri-layers on sapphire or silicon substrates. Structures are characterized with reflection high energy electron diffraction, atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and X-ray diffraction. Applications of these structures to the field of quantum information processing is discussed.

physics.app-ph↗

arXiv2020

Overlap junctions for superconducting quantum electronics and amplifiers

Due to their unique properties as lossless, nonlinear circuit elements, Josephson junctions lie at the heart of superconducting quantum information processing. Previously, we demonstrated a two-layer, submicrometer-scale overlap junction fabrication process suitable for qubits with long coherence times. Here, we extend the overlap junction fabrication process to micrometer-scale junctions. This allows us to fabricate other superconducting quantum devices. For example, we demonstrate an overlap-junction-based Josephson parametric amplifier that uses only 2 layers. This efficient fabrication process yields frequency-tunable devices with negligible insertion loss and a gain of ~ 30 dB. Compared to other processes, the overlap junction allows for fabrication with minimal infrastructure, high yield, and state-of-the-art device performance.

physics.app-ph↗