SearcharxivSearch

arXiv subjects

Davide Rossi

Publications and source records attributed to Davide Rossi.

At least 19 recordsLinked to original sources

Scalable AXI4 Transaction Monitoring for Mixed-Criticality SoCs: From Phase-Level Precision to ID-Level Efficiency

Mixed-criticality Systems-on-Chip (SoCs) with on-chip interconnects based on the AXI4 open standard protocol lack a protocol-level timeout mechanism, exposing systems to deadlocks and missed real-time deadlines when subordinate devices or managers fail or stall due to hardware faults, radiation-induced upsets, or software errors. This work presents a configurable hardware intellectual property (IP), non-intrusive in fault-free operation, that detects AXI4 protocol violations and timing faults at runtime and restores interconnect liveness through a cut-and- drain isolation mechanism. To address the fundamental trade-off between monitoring granularity and area cost, we introduce three designs at decreasing monitoring granularity: Phase-Level Track-ing (PLT), which provides cycle-accurate fault localization across individual protocol phases; Channel-Level Tracking (CLT), which coalesces per-phase monitors into channel-level supervision; and ID-Level Tracking (ILT), which achieves sub-linear area scaling by monitoring only per-ID transaction boundaries. Synthesized in GlobalFoundries 12 nm technology, CLT reduces area by 36.7% relative to PLT while preserving worst-case detection bounds at a minimal detection latency overhead, whereas ILT achieves an 89.2% area reduction suitable for tightly constrained deployments at the cost of a 3.7x higher median detection latency with coarser fault localization. Fault injection campaigns on a RISC-V SoC across 1.2 million scenarios confirm that no fault manifesting as an AXI4 protocol or liveness violation escaped detection, with observed detection latencies consistently bounded by theoretical worst-case predictions.

cs.AR

CHIMERA: A Flexible and Scalable 3.1 TOPS/W AI-MCU with Transformer Accelerator and 563 Gb/s Shared-L2 Memory Subsystem with QoS Guarantees

We present Chimera, a flexible and scalable Microcontroller Unit (MCU) designed to accelerate real-time inference of rapidly evolving transformer-based models at the ultra-low-power edge (hundred of mW). The chip, implemented in 22 nm FDX technology, integrates a transformer accelerator tightly coupled within a compute cluster featuring nine general-purpose RV32IMA cores. Scalability extends to the memory hierarchy through a novel L2 memory island subsystem, which enables data sharing across multiple clusters while delivering 563 Gb/s aggregate bandwidth. The L2 subsystem enforces quality-of-service guarantees for latency-critical traffic, achieving up to 16x latency reduction. Chimera achieves peak energy and area efficiencies of 3.1 TOPS/W and 281 GOPS/mm2, demonstrating 1.37x higher energy efficiency and up to 100x higher area efficiency compared to State of the Art (SoA) SoCs. Compared to SoA standalone accelerators, Chimera achieves comparable energy efficiency and up to 1.8x higher area efficiency.

cs.AR

Not All Faults Are Equal: Transient-Fault Sensitivity Characterization of an Open-Source RISC-V Vector Cluster

We present a transient-fault sensitivity study of the open-source RISC-V vector cluster Spatz under SET and SEU fault models. Across 100,000 fault injections on six MatMul and Widening MatMul configurations, faulty data corruption (FD) is the dominant manifesting outcome for all evaluated workloads, accounting for at least 86% of manifesting errors in the SET campaigns and at least 91% in the SEU campaigns. At the module level, SET sensitivity is concentrated in the vector execution path, while TCDM is the major contributor to FD manifestations. We further quantify SDC severity across FP32, FP16, BP16, and FP8 by analyzing both the average number of corrupted outputs and their RMSE. FP8 shows the lowest output impact overall, while FP16 Widening MatMul reduces both corruption spread and RMSE compared with FP16 MatMul. By contrast, the effect of widening on FP8 is limited in our experiments. Finally, exponent-targeted corruptions induce the most severe SDC events, with the largest deviations observed in FP32 and BP16, motivating selective protection of the highest-impact datapaths and fault cases.

cs.AR

Safe-NEureka: a Hybrid Modular Redundant DNN Accelerator for On-board Satellite AI Processing

Low Earth Orbit (LEO) constellations are revolutionizing the space sector, with on-board Artificial Intelligence (AI) becoming pivotal for next-generation satellites. AI acceleration is essential for safety-critical functions such as autonomous Guidance, Navigation, and Control (GNC), where errors cannot be tolerated, and performance-critical processing of high-bandwidth sensor data, where occasional errors are tolerable. Consequently, AI accelerators for satellites must combine robust protection against radiation-induced faults with high throughput. This paper presents Safe-NEureka, a Hybrid Modular Redundant Deep Neural Network (DNN) accelerator for heterogeneous RISC-V systems. It operates in two modes: a redundancy mode utilizing Dual Modular Redundancy (DMR) with hardware-based recovery, and a performance mode repurposing redundant datapaths to maximize parallel throughput. Furthermore, its memory interface is protected by Error Correction Codes (ECCs), and the controller by Triple Modular Redundancy (TMR). Implementation in GlobalFoundries 12nm technology shows a 96 reduction in faulty executions in redundancy mode, with a manageable 15 area overhead. In performance mode, the architecture achieves near-baseline speeds on 3x3 dense convolutions with a 5 throughput and 11 efficiency reduction, compared to 48 and 53 in redundancy mode. This flexibility ensures high overheads are limited to critical tasks, establishing Safe-NEureka as a versatile solution for space applications.

eess.SP

CVA6-CFI: A First Glance at RISC-V Control-Flow Integrity Extensions

This work presents the first design, integration, and evaluation of the standard RISC-V extensions for Control-Flow Integrity (CFI). The Zicfiss and Zicfilp extensions aim at protecting the execution of a vulnerable program from control-flow hijacking attacks through the implementation of security mechanisms based on shadow stack and landing pad primitives. We introduce two independent and configurable hardware units implementing forward-edge and backward-edge control-flow protection, fully integrated into the open-source CVA6 core. Our design incurs in only 1.0% area overhead when synthesized in 22 nm FDX technology, and up to 15.6% performance overhead based on evaluation with the MiBench automotive benchmark subset. We release the complete implementation as open source.

cs.AR

Co-designing a Programmable RISC-V Accelerator for MPC-based Energy and Thermal Management of Many-Core HPC Processors

Managing energy and thermal profiles is critical for many-core HPC processors with hundreds of application-class processing elements (PEs). Advanced model predictive control (MPC) delivers state-of-the-art performance but requires solving an online optimization problem over a thousand times per second (1 kHz control bandwidth), with computational and memory demands scaling with PE count. Traditional MPC approaches execute the controller on the PEs, but operating system overheads create jitter and limit control bandwidth. Running MPC on dedicated on-chip controllers enables fast, deterministic control but raises concerns about area and power overhead. In this work, we tackle these challenges by proposing a hardware-software codesign of a lightweight MPC controller, based on an operator-splitting quadratic programming solver and an embedded multi-core RISC-V controller. Key innovations include pruning weak thermal couplings to reduce model memory and ahead-of-time scheduling for efficient parallel execution of sparse triangular systems arising from the optimization problem. The proposed controller achieves sub-millisecond latency when controlling 144 PEs at 500 MHz, delivering 33x lower latency and 7.9x higher energy efficiency than a single-core baseline. Operating within a compact less than 1 MiB memory footprint, it consumes as little as 325 mW while occupying less than 1.5% of a typical HPC processor's die area.

cs.DC

FractalSync: Lightweight Scalable Global Synchronization of Massive Bulk Synchronous Parallel AI Accelerators

The slow-down of technology scaling and the emergence of Artificial Intelligence (AI) workloads have led computer architects to increasingly exploit parallelization coupled with hardware acceleration to keep pushing the performance envelope. However, this solution comes with the challenge of synchronization of processing elements (PEs) in massive heterogeneous many-core platforms. To address this challenge, we propose FractalSync, a hardware accelerated synchronization mechanism for Bulk Synchronous Parallel (BSP) systems. We integrate FractalSync in MAGIA, a scalable tile-based AI accelerator, with each tile featuring a RISC-V-coupled matrix-multiplication (MatMul) accelerator, scratchpad memory (SPM), and a DMA connected to a global mesh Network-on-Chip (NoC). We study the scalability of the proposed barrier synchronization scheme on tile meshes ranging from 2x2 PEs to 16x16 PEs to evaluate its design boundaries. Compared to a synchronization scheme based on software atomic memory operations (AMOs), the proposed solution achieves up to 43x speedup on synchronization, introducing a negligible area overhead (<0.01%). FractalSync closes timing at MAGIA's target 1GHz frequency.

cs.AR

Ramping Up Open-Source RISC-V Cores: Assessing the Energy Efficiency of Superscalar, Out-of-Order Execution

Open-source RISC-V cores are increasingly demanded in domains like automotive and space, where achieving high instructions per cycle (IPC) through superscalar and out-of-order (OoO) execution is crucial. However, high-performance open-source RISC-V cores face adoption challenges: some (e.g. BOOM, Xiangshan) are developed in Chisel with limited support from industrial electronic design automation (EDA) tools. Others, like the XuanTie C910 core, use proprietary interfaces and protocols, including non-standard AXI protocol extensions, interrupts, and debug support. In this work, we present a modified version of the OoO C910 core to achieve full RISC-V standard compliance in its debug, interrupt, and memory interfaces. We also introduce CVA6S+, an enhanced version of the dual-issue, industry-supported open-source CVA6 core. CVA6S+ achieves 34.4% performance improvement over CVA6 core. We conduct a detailed performance, area, power, and energy analysis on the superscalar out-of-order C910, superscalar in-order CVA6S+ and vanilla, single-issue in-order CVA6, all implemented in a 22nm technology and integrated into Cheshire, an open-source modular SoC. We examine the performance and efficiency of different microarchitectures using the same ISA, SoC, and implementation with identical technology, tools, and methodologies. The area and performance rankings of CVA6, CVA6S+, and C910 follow expected trends: compared to the scalar CVA6, CVA6S+ shows an area increase of 6% and an IPC improvement of 34.4%, while C910 exhibits a 75% increase in area and a 119.5% improvement in IPC. However, efficiency analysis reveals that CVA6S+ leads in area efficiency (GOPS/mm2), while the C910 is highly competitive in energy efficiency (GOPS/W). This challenges the common belief that high performance in superscalar and out-of-order cores inherently comes at a significant cost in area and energy efficiency.

cs.AR

CVA6S+: A Superscalar RISC-V Core with High-Throughput Memory Architecture

Open-source RISC-V cores are increasingly adopted in high-end embedded domains such as automotive, where maximizing instructions per cycle (IPC) is becoming critical. Building on the industry-supported open-source CVA6 core and its superscalar variant, CVA6S, we introduce CVA6S+, an enhanced version incorporating improved branch prediction, register renaming and enhanced operand forwarding. These optimizations enable CVA6S+ to achieve a 43.5% performance improvement over the scalar configuration and 10.9% over CVA6S, with an area overhead of just 9.30% over the scalar core (CVA6). Furthermore, we integrate CVA6S+ with the OpenHW Core-V High-Performance L1 Dcache (HPDCache) and report a 74.1% bandwidth improvement over the legacy CVA6 cache subsystem.

cs.AR

Parallelization is All System Identification Needs: End-to-end Vibration Diagnostics on a multi-core RISC-V edge device

The early detection of structural malfunctions requires the installation of real-time monitoring systems ensuring continuous access to the damage-sensitive information; nevertheless, it can generate bottlenecks in terms of bandwidth and storage. Deploying data reduction techniques at the edge is recognized as a proficient solution to reduce the system's network traffic. However, the most effective solutions currently employed for the purpose are based on memory and power-hungry algorithms, making their embedding on resource-constrained devices very challenging; this is the case of vibration data reduction based on System Identification models. This paper presents PARSY-VDD, a fully optimized PArallel end-to-end software framework based on SYstem identification for Vibration-based Damage Detection, as a suitable solution to perform damage detection at the edge in a time and energy-efficient manner, avoiding streaming raw data to the cloud. We evaluate the damage detection capabilities of PARSY-VDD with two benchmarks: a bridge and a wind turbine blade, showcasing the robustness of the end-to-end approach. Then, we deploy PARSY-VDD on both commercial single-core and a specific multi-core edge device. We introduce an architecture-agnostic algorithmic optimization for SysId, improving the execution by 90x and reducing the consumption by 85x compared with the state-of-the-art SysId implementation on GAP9. Results show that by utilizing the unique parallel computing capabilities of GAP9, the execution time is 751{\mu}s with the high-performance multi-core solution operating at 370MHz and 0.8V, while the energy consumption is 37{\mu}J with the low-power solution operating at 240MHz and 0.65V. Compared with other single-core implementations based on STM32 microcontrollers, the GAP9 high-performance configuration is 76x faster, while the low-power configuration is 360x more energy efficient.

eess.SP

Maestro: A 302 GFLOPS/W and 19.8GFLOPS RISC-V Vector-Tensor Architecture for Wearable Ultrasound Edge Computing

Most Wearable Ultrasound (WUS) devices lack the computational power to process signals at the edge, instead relying on remote offload, which introduces latency, high power consumption, and privacy concerns. We present Maestro, a RISC-V SoC with unified Vector-Tensor Unit (VTU) and memory-coupled Fast Fourier Transform (FFT) accelerators targeting edge processing for wearable ultrasound devices, fabricated using low-cost TSMC 65nm CMOS technology. The VTU achieves peak 302GFLOPS/W and 19.8GFLOPS at FP16, while the multi-precision 16/32-bit floating-point FFT accelerator delivers peak 60.6GFLOPS/W and 3.6GFLOPS at FP16, We evaluate Maestro on a US-based gesture recognition task, achieving 1.62GFLOPS in signal processing at 26.68GFLOPS/W, and 19.52GFLOPS in Convolutional Neural Network (CNN) workloads at 298.03GFLOPS/W. Compared to a state-of-the-art SoC with a similar mission profile, Maestro achieves a 5x speedup while consuming only 12mW, with an energy consumption of 2.5mJ in a wearable US channel preprocessing and ML-based postprocessing pipeline.

cs.AR

A Reliable, Time-Predictable Heterogeneous SoC for AI-Enhanced Mixed-Criticality Edge Applications

Next-generation mixed-criticality Systems-on-chip (SoCs) for robotics, automotive, and space must execute mixed-criticality AI-enhanced sensor processing and control workloads, ensuring reliable and time-predictable execution of critical tasks sharing resources with non-critical tasks, while also fitting within a sub-2W power envelope. To tackle these multi-dimensional challenges, in this brief, we present a 16nm, reliable, time-predictable heterogeneous SoC with multiple programmable accelerators. Within a 1.2W power envelope, the SoC integrates software-configurable hardware IPs to ensure predictable access to shared resources, such as the on-chip interconnect and memory system, leading to tight upper bounds on execution times of critical applications. To accelerate mixed-precision mission-critical AI, the SoC integrates a reliable multi-core accelerator achieving 304.9 GOPS peak performance at 1.6 TOPS/W energy efficiency. Non-critical, compute-intensive, floating-point workloads are accelerated by a dual-core vector cluster, achieving 121.8 GFLOPS at 1.1 TFLOPS/W and 106.8 GFLOPS/mm2.

cs.AR

Towards Reliable Systems: A Scalable Approach to AXI4 Transaction Monitoring

In safety-critical SoC applications such as automotive and aerospace, reliable transaction monitoring is crucial for maintaining system integrity. This paper introduces a drop-in Transaction Monitoring Unit (TMU) for AXI4 subordinate endpoints that detects transaction failures including protocol violations or timeouts and triggers recovery by resetting the affected subordinates. Two TMU variants address different constraints: a Tiny-Counter solution for tightly area-constrained systems and a Full-Counter solution for critical subordinates in mixed-criticality SoCs. The Tiny-Counter employs a single counter per outstanding transaction, while the Full-Counter uses multiple counters to track distinct transaction stages, offering finer-grained monitoring and reducing detection latencies by up to hundreds of cycles at roughly 2.5x the area cost. The Full-Counter also provides detailed error logs for performance and bottleneck analysis. Evaluations at both IP and system levels confirm the TMU's effectiveness and low overhead. In GF12 technology, monitoring 16-32 outstanding transactions occupies 1330-2616 um2 for the Tiny-Counter and 3452-6787 um2 for the Full-Counter; moderate prescaler steps reduce these figures by 18-39% and 19-32%, respectively, with no loss of functionality. Results from a full-system integration demonstrate the TMU's robust and precise monitoring capabilities in safety-critical SoC environments.

cs.AR

AXI-REALM: Safe, Modular and Lightweight Traffic Monitoring and Regulation for Heterogeneous Mixed-Criticality Systems

The automotive industry is transitioning from federated, homogeneous, interconnected devices to integrated, heterogeneous, mixed-criticality systems (MCS). This leads to challenges in achieving timing predictability techniques due to access contention on shared resources, which can be mitigated using hardware-based spatial and temporal isolation techniques. Focusing on the interconnect as the point of access for shared resources, we propose AXI-REALM, a lightweight, modular, technology-independent, and open-source real-time extension to AXI4 interconnects. AXI-REALM uses a budget-based mechanism enforced on periodic time windows and transfer fragmentation to provide fair arbitration, coupled with execution predictability on real-time workloads. AXI-REALM features a comprehensive bandwidth and latency monitor at both the ingress and egress of the interconnect system. Latency information is also used to detect and reset malfunctioning subordinates, preventing missed deadlines. We provide a detailed cost assessment in a 12 nm node and an end-to-end case study implementing AXI-REALM into an open-source MCS, incurring an area overhead of less than 2%. When running a mixed-criticality workload, with a time-critical application sharing the interconnect with non-critical applications, we demonstrate that the critical application can achieve up to 68.2% of the isolated performance by enforcing fairness on the interconnect traffic through burst fragmentation, thus reducing the subordinate access latency by up to 24 times. Near-ideal performance, (above 95% of the isolated performance) can be achieved by distributing the available bandwidth in favor of the critical application.

cs.AR

Occamy: A 432-Core Dual-Chiplet Dual-HBM2E 768-DP-GFLOP/s RISC-V System for 8-to-64-bit Dense and Sparse Computing in 12nm FinFET

ML and HPC applications increasingly combine dense and sparse memory access computations to maximize storage efficiency. However, existing CPUs and GPUs struggle to flexibly handle these heterogeneous workloads with consistently high compute efficiency. We present Occamy, a 432-Core, 768-DP-GFLOP/s, dual-HBM2E, dual-chiplet RISC-V system with a latency-tolerant hierarchical interconnect and in-core streaming units (SUs) designed to accelerate dense and sparse FP8-to-FP64 ML and HPC workloads. We implement Occamy's compute chiplets in 12 nm FinFET, and its passive interposer, Hedwig, in a 65 nm node. On dense linear algebra (LA), Occamy achieves a competitive FPU utilization of 89%. On stencil codes, Occamy reaches an FPU utilization of 83% and a technology-node-normalized compute density of 11.1 DP-GFLOP/s/mm2,leading state-of-the-art (SoA) processors by 1.7x and 1.2x, respectively. On sparse-dense linear algebra (LA), it achieves 42% FPU utilization and a normalized compute density of 5.95 DP-GFLOP/s/mm2, surpassing the SoA by 5.2x and 11x, respectively. On, sparse-sparse LA, Occamy reaches a throughput of up to 187 GCOMP/s at 17.4 GCOMP/s/W and a compute density of 3.63 GCOMP/s/mm2. Finally, we reach up to 75% and 54% FPU utilization on and dense (LLM) and graph-sparse (GCN) ML inference workloads. Occamy's RTL is freely available under a permissive open-source license.

cs.AR

Open-Source Heterogeneous SoCs for AI: The PULP Platform Experience

Since 2013, the PULP (Parallel Ultra-Low Power) Platform project has been one of the most active and successful initiatives in designing research IPs and releasing them as open-source. Its portfolio now ranges from processor cores to network-on-chips, peripherals, SoC templates, and full hardware accelerators. In this article, we focus on the PULP experience designing heterogeneous AI acceleration SoCs - an endeavour encompassing SoC architecture definition; development, verification, and integration of acceleration IPs; front- and back-end VLSI design; testing; development of AI deployment software.

cs.AR

A Flexible Template for Edge Generative AI with High-Accuracy Accelerated Softmax & GELU

Transformer-based generative Artificial Intelligence (GenAI) models achieve remarkable results in a wide range of fields, including natural language processing, computer vision, and audio processing. However, this comes at the cost of increased complexity and the need of sophisticated non-linearities such as softmax and GELU. Even if Transformers are computationally dominated by matrix multiplications (MatMul), these non-linearities can become a performance bottleneck, especially if dedicated hardware is used to accelerate MatMul operators. In this work, we introduce a GenAI BFloat16 Transformer acceleration template based on a heterogeneous tightly-coupled cluster containing 256KiB of shared SRAM, 8 general-purpose RISC-V cores, a 24x8 systolic array MatMul accelerator, and a novel accelerator for Transformer softmax and GELU non-linearities: SoftEx. SoftEx introduces an approximate exponentiation algorithm balancing efficiency (121x speedup over glibc's implementation) with accuracy (mean relative error of 0.14%). In 12nm technology, SoftEx occupies 0.039 mm$^2$, only 3.22% of the cluster, which achieves an operating frequency of 1.12 GHz. Compared to optimized software running on the RISC-V cores, SoftEx achieves significant improvements, accelerating softmax and GELU computations by up to 10.8x and 5.11x, respectively, while reducing their energy consumption by up to 10.8x and 5.29x. These enhancements translate into a 1.58x increase in throughput (310 GOPS at 0.8V) and a 1.42x improvement in energy efficiency (1.34 TOPS/W at 0.55V) on end-to-end ViT inference workloads.

cs.AR

The Impact of the COVID-19 Pandemic on Women's Contribution to Public Code

Despite its promise of openness and inclusiveness, the development of free and open source software (FOSS) remains significantly unbalanced in terms of gender representation among contributors. To assist open source project maintainers and communities in addressing this imbalance, it is crucial to understand the causes of this inequality.In this study, we aim to establish how the COVID-19 pandemic has influenced the ability of women to contribute to public code. To do so, we use the Software Heritage archive, which holds the largest dataset of commits to public code, and the difference in differences (DID) methodology from econometrics that enables the derivation of causality from historical data.Our findings show that the COVID-19 pandemic has disproportionately impacted women's ability to contribute to the development of public code, relatively to men. Further, our observations of specific contributor subgroups indicate that COVID-19 particularly affected women hobbyists, identified using contribution patterns and email address domains.

cs.SE