arXiv subjects

Davide Rossi

Publications and source records attributed to Davide Rossi.

At least 55 records · Page 3Linked to original sources

arXiv2023

A 3 TOPS/W RISC-V Parallel Cluster for Inference of Fine-Grain Mixed-Precision Quantized Neural Networks

The emerging trend of deploying complex algorithms, such as Deep Neural Networks (DNNs), increasingly poses strict memory and energy efficiency requirements on Internet-of-Things (IoT) end-nodes. Mixed-precision quantization has been proposed as a technique to minimize a DNN's memory footprint and maximize its execution efficiency, with negligible end-to-end precision degradation. In this work, we present a novel hardware and software stack for energy-efficient inference of mixed-precision Quantized Neural Networks (QNNs). We introduce Flex-V, a processor based on the RISC-V Instruction Set Architecture (ISA) that features fused Mac&Load mixed-precision dot product instructions; to avoid the exponential growth of the encoding space due to mixed-precision variants, we encode formats into the Control-Status Registers (CSRs). Flex-V core is integrated into a tightly-coupled cluster of eight processors; in addition, we provide a full framework for the end-to-end deployment of DNNs including a compiler, optimized libraries, and a memory-aware deployment flow. Our results show up to 91.5 MAC/cycle and 3.26 TOPS/W on the cluster, implemented in a commercial 22nm FDX technology, with up to 8.5x speed-up, and an area overhead of only 5.6% with respect to the baseline. To demonstrate the capabilities of the architecture, we benchmark it with end-to-end real-life QNNs, improving performance by 2x - 2.5x with respect to existing solutions using fully flexible programmable processors.

cs.AR↗

arXiv2023

Echoes: a 200 GOPS/W Frequency Domain SoC with FFT Processor and I2S DSP for Flexible Data Acquisition from Microphone Arrays

Emerging applications in the IoT domain require ultra-low-power and high-performance end-nodes to deal with complex near-sensor-data analytics. Domains such as audio, radar, and Structural Health Monitoring require many computations to be performed in the frequency domain rather than in the time domain. We present ECHOES, a System-On-a-Chip (SoC) composed of a RISC-V core enhanced with fixed and floating-point digital signal processing (DSP) extensions and a Fast-Fourier Transform (FFT) hardware accelerator targeting emerging frequency-domain application. The proposed SoC features an autonomous I/O engine supporting a wide set of peripherals, including Ultra-Low-Power radars, MEMS, and digital microphones over I2S protocol with full-duplex Time Division Multiplexing DSP mode, making ECHOES the first open-source SoC which offers this functionality enabling simultaneous communication with up to 16 I/Os devices. ECHOES, fabricated with 65nm CMOS technology, reaches a peak performance of 0.16 GFLOPS and a peak energy efficiency of 9.68 GFLOPS/W on a wide range of floating and fixed-point general-purpose DSP kernels. The FFT accelerator achieves performance up to 10.16 GOPS with an efficiency of 199.8 GOPS/W, improving performance and efficiency by up to 41.1x and 11.2x, respectively, over its software implementation of this critical task for frequency domain processing.

cs.AR↗

arXiv2023

RedMule: A Mixed-Precision Matrix-Matrix Operation Engine for Flexible and Energy-Efficient On-Chip Linear Algebra and TinyML Training Acceleration

The increasing interest in TinyML, i.e., near-sensor machine learning on power budgets of a few tens of mW, is currently pushing toward enabling TinyML-class training as opposed to inference only. Current training algorithms, based on various forms of error and gradient backpropagation, rely on floating-point matrix operations to meet the precision and dynamic range requirements. So far, the energy and power cost of these operations has been considered too high for TinyML scenarios. This paper addresses the open challenge of near-sensor training on a few mW power budget and presents RedMulE - Reduced-Precision Matrix Multiplication Engine, a low-power specialized accelerator conceived for multi-precision floating-point General Matrix-Matrix Operations (GEMM-Ops) acceleration, supporting FP16, as well as hybrid FP8 formats, with {sign, exponent, mantissa}=({1,4,3}, {1,5,2}). We integrate RedMule into a Parallel Ultra-Low-Power (PULP) cluster containing eight energy-efficient RISC-V cores sharing a tightly-coupled data memory and implement the resulting system in a 22 nm technology. At its best efficiency point (@ 470 MHz, 0.65 V), the RedMulE-augmented PULP cluster achieves 755 GFLOPS/W and 920 GFLOPS/W during regular General Matrix-Matrix Multiplication (GEMM), and up to 1.19 TFLOPS/W and 1.67 TFLOPS/W when executing GEMM-Ops, respectively, for FP16 and FP8 input/output tensors. In its best performance point (@ 613 MHz, 0.8 V), RedMulE achieves up to 58.5 GFLOPS and 117 GFLOPS for FP16 and FP8, respectively, with 99.4% utilization of the array of Computing Elements and consuming less than 60 mW on average, thus enabling on-device training of deep learning models in TinyML application scenarios while retaining the flexibility to tackle other classes of common linear algebra problems efficiently.

cs.AR↗

arXiv2023

DARKSIDE: A Heterogeneous RISC-V Compute Cluster for Extreme-Edge On-Chip DNN Inference and Training

On-chip DNN inference and training at the Extreme-Edge (TinyML) impose strict latency, throughput, accuracy and flexibility requirements. Heterogeneous clusters are promising solutions to meet the challenge, combining the flexibility of DSP-enhanced cores with the performance and energy boost of dedicated accelerators. We present DARKSIDE, a System-on-Chip with a heterogeneous cluster of 8 RISC-V cores enhanced with 2-b to 32-b mixed-precision integer arithmetic. To boost performance and efficiency on key compute-intensive Deep Neural Network (DNN) kernels, the cluster is enriched with three digital accelerators: a specialized engine for low-data-reuse depthwise convolution kernels (up to 30 MAC/cycle); a minimal overhead datamover to marshal 1-b to 32-b data on-the-fly; a 16-b floating point Tensor Product Engine (TPE) for tiled matrix-multiplication acceleration. DARKSIDE is implemented in 65nm CMOS technology. The cluster achieves a peak integer performance of 65 GOPS and a peak efficiency of 835 GOPS/W when working on 2-b integer DNN kernels. When targeting floating-point tensor operations, the TPE provides up to 18.2 GFLOPS of performance or 300 GFLOPS/W of efficiency - enough to enable on-chip floating-point training at competitive speed coupled with ultra-low power quantized inference.

cs.AR↗

arXiv2023

Cyber Security aboard Micro Aerial Vehicles: An OpenTitan-based Visual Communication Use Case

Autonomous Micro Aerial Vehicles (MAVs), with a form factor of 10cm in diameter, are an emerging technology thanks to the broad applicability enabled by their onboard intelligence. However, these platforms are strongly limited in the onboard power envelope for processing, i.e., less than a few hundred mW, which confines the onboard processors to the class of simple microcontroller units (MCUs). These MCUs lack advanced security features opening the way to a wide range of cyber security vulnerabilities, from the communication between agents of the same fleet to the onboard execution of malicious code. This work presents an open source System on Chip (SoC) design that integrates a 64 bit Linux capable host processor accelerated by an 8 core 32 bit parallel programmable accelerator. The heterogeneous system architecture is coupled with a security enclave based on an open source OpenTitan root of trust. To demonstrate our design, we propose a use case where OpenTitan detects a security breach on the SoC aboard the MAV and drives its exclusive GPIOs to start a LED blinking routine. This procedure embodies an unconventional visual communication between two palm sized MAVs: the receiver MAV classifies the LED state of the sender (on or off) with an onboard convolutional neural network running on the parallel accelerator. Then, it reconstructs a high-level message in 1.3s, 2.3 times faster than current commercial solutions.

cs.CR↗

arXiv2023

Dustin: A 16-Cores Parallel Ultra-Low-Power Cluster with 2b-to-32b Fully Flexible Bit-Precision and Vector Lockstep Execution Mode

Computationally intensive algorithms such as Deep Neural Networks (DNNs) are becoming killer applications for edge devices. Porting heavily data-parallel algorithms on resource-constrained and battery-powered devices poses several challenges related to memory footprint, computational throughput, and energy efficiency. Low-bitwidth and mixed-precision arithmetic have been proven to be valid strategies for tackling these problems. We present Dustin, a fully programmable compute cluster integrating 16 RISC-V cores capable of 2- to 32-bit arithmetic and all possible mixed-precision permutations. In addition to a conventional Multiple-Instruction Multiple-Data (MIMD) processing paradigm, Dustin introduces a Vector Lockstep Execution Mode (VLEM) to minimize power consumption in highly data-parallel kernels. In VLEM, a single leader core fetches instructions and broadcasts them to the 15 follower cores. Clock gating Instruction Fetch (IF) stages and private caches of the follower cores leads to 38\% power reduction with minimal performance overhead (<3%). The cluster, implemented in 65 nm CMOS technology, achieves a peak performance of 58 GOPS and a peak efficiency of 1.15 TOPS/W.

cs.AR↗

arXiv2022

HULK-V: a Heterogeneous Ultra-low-power Linux capable RISC-V SoC

IoT applications span a wide range in performance and memory footprint, under tight cost and power constraints. High-end applications rely on power-hungry Systems-on-Chip (SoCs) featuring powerful processors, large LPDDR/DDR3/4/5 memories, and supporting full-fledged Operating Systems (OS). On the contrary, low-end applications typically rely on Ultra-Low-Power ucontrollers with a "close to metal" software environment and simple micro-kernel-based runtimes. Emerging applications and trends of IoT require the "best of both worlds": cheap and low-power SoC systems with a well-known and agile software environment based on full-fledged OS (e.g., Linux), coupled with extreme energy efficiency and parallel digital signal processing capabilities. We present HULK-V: an open-source Heterogeneous Linux-capable RISC-V-based SoC coupling a 64-bit RISC-V processor with an 8-core Programmable Multi-Core Accelerator (PMCA), delivering up to 13.8 GOps, up to 157 GOps/W and accelerating the execution of complex DSP and ML tasks by up to 112x over the host processor. HULK-V leverages a lightweight, fully digital memory hierarchy based on HyperRAM IoT DRAM that exposes up to 512 MB of DRAM memory to the host CPU. Featuring HyperRAMs, HULK-V doubles the energy efficiency without significant performance loss compared to featuring power-hungry LPDDR memories, requiring expensive and large mixed-signal PHYs. HULK-V, implemented in Global Foundries 22nm FDX technology, is a fully digital ultra-low-cost SoC running a 64-bit Linux software stack with OpenMP host-to-PMCA offload within a power envelope of just 250 mW.

cs.AR↗

arXiv2022

End-to-End DNN Inference on a Massively Parallel Analog In Memory Computing Architecture

The demand for computation resources and energy efficiency of Convolutional Neural Networks (CNN) applications requires a new paradigm to overcome the "Memory Wall". Analog In-Memory Computing (AIMC) is a promising paradigm since it performs matrix-vector multiplications, the critical kernel of many ML applications, in-place in the analog domain within memory arrays structured as crossbars of memory cells. However, several factors limit the full exploitation of this technology, including the physical fabrication of the crossbar devices, which constrain the memory capacity of a single array. Multi-AIMC architectures have been proposed to overcome this limitation, but they have been demonstrated only for tiny and custom CNNs or performing some layers off-chip. In this work, we present the full inference of an end-to-end ResNet-18 DNN on a 512-cluster heterogeneous architecture coupling a mix of AIMC cores and digital RISC-V cores, achieving up to 20.2 TOPS. Moreover, we analyze the mapping of the network on the available non-volatile cells, compare it with state-of-the-art models, and derive guidelines for next-generation many-core architectures based on AIMC devices.

cs.DC↗

arXiv2022

Kraken: A Direct Event/Frame-Based Multi-sensor Fusion SoC for Ultra-Efficient Visual Processing in Nano-UAVs

Small-size unmanned aerial vehicles (UAV) have the potential to dramatically increase safety and reduce cost in applications like critical infrastructure maintenance and post-disaster search and rescue. Many scenarios require UAVs to shrink toward nano and pico-size form factors. The key open challenge to achieve true autonomy on Nano-UAVs is to run complex visual tasks like object detection, tracking, navigation and obstacle avoidance fully on board, at high speed and robustness, under tight payload and power constraints. With the Kraken SoC, fabricated in 22nm FDX technology, we demonstrate a multi-visual-sensor capability exploiting both event-based and BW/RGB imagers, combining their output for multi-functional visual tasks previously impossible on a single low-power chip for Nano-UAVs. Kraken is an ultra-low-power, heterogeneous SoC architecture integrating three acceleration engines and a vast set of peripherals to enable efficient interfacing with standard frame-based sensors and novel event-based DVS. Kraken enables highly sparse event-driven sub-uJ/inf SNN inference on a dedicated neuromorphic energy-proportional accelerator. Moreover, it can perform frame-based inference by combining a 1.8TOp\s\W 8-cores RISC-V processor cluster with mixed-precision DNN extensions with a 1036TOp\s\W} TNN accelerator.

cs.AR↗

arXiv2022

Scale up your In-Memory Accelerator: Leveraging Wireless-on-Chip Communication for AIMC-based CNN Inference

Analog In-Memory Computing (AIMC) is emerging as a disruptive paradigm for heterogeneous computing, potentially delivering orders of magnitude better peak performance and efficiency over traditional digital signal processing architectures on Matrix-Vector multiplication. However, to sustain this throughput in real-world applications, AIMC tiles must be supplied with data at very high bandwidth and low latency; this poses an unprecedented pressure on the on-chip communication infrastructure, which becomes the system's performance and efficiency bottleneck. In this context, the performance and plasticity of emerging on-chip wireless communication paradigms provide the required breakthrough to up-scale on-chip communication in large AIMC devices. This work presents a many-tile AIMC architecture with inter-tile wireless communication that integrates multiple heterogeneous computing clusters, embedding a mix of parallel RISC-V cores and AIMC tiles. We perform an extensive design space exploration of the proposed architecture and discuss the benefits of exploiting emerging on-chip communication technologies such as wireless transceivers in the millimeter-wave and terahertz bands.

cs.AR↗

arXiv2022

RedMulE: A Compact FP16 Matrix-Multiplication Accelerator for Adaptive Deep Learning on RISC-V-Based Ultra-Low-Power SoCs

The fast proliferation of extreme-edge applications using Deep Learning (DL) based algorithms required dedicated hardware to satisfy extreme-edge applications' latency, throughput, and precision requirements. While inference is achievable in practical cases, online finetuning and adaptation of general DL models are still highly challenging. One of the key stumbling stones is the need for parallel floating-point operations, which are considered unaffordable on sub-100 mW extreme-edge SoCs. We tackle this problem with RedMulE (Reduced-precision matrix Multiplication Engine), a parametric low-power hardware accelerator for FP16 matrix multiplications - the main kernel of DL training and inference - conceived for tight integration within a cluster of tiny RISC-V cores based on the PULP (Parallel Ultra-Low-Power) architecture. In 22 nm technology, a 32-FMA RedMulE instance occupies just 0.07 mm^2 (14% of an 8-core RISC-V cluster) and achieves up to 666 MHz maximum operating frequency, for a throughput of 31.6 MAC/cycle (98.8% utilization). We reach a cluster-level power consumption of 43.5 mW and a full-cluster energy efficiency of 688 16-bit GFLOPS/W. Overall, RedMulE features up to 4.65x higher energy efficiency and 22x speedup over SW execution on 8 RISC-V cores.

cs.AR↗

arXiv2022

Geographic Diversity in Public Code Contributions

We conduct an exploratory, large-scale, longitudinal study of 50 years of commits to publicly available version control system repositories, in order to characterize the geographic diversity of contributors to public code and its evolution over time. We analyze in total 2.2 billion commits collected by Software Heritage from 160 million projects and authored by 43 million authors during the 1971-2021 time period. We geolocate developers to 12 world regions derived from the United Nation geoscheme, using as signals email top-level domains, author names compared with names distributions around the world, and UTC offsets mined from commit metadata.We find evidence of the early dominance of North America in open source software, later joined by Europe. After that period, the geographic diversity in public code has been constantly increasing. We also identify relevant historical shifts related to the UNIX wars, the increase of coding literacy in Central and South Asia, and broader phenomena like colonialism and people movement across countries (immigration/emigration).

cs.SE↗

arXiv2022

Worldwide Gender Differences in Public Code Contributions

Gender imbalance is a well-known phenomenon observed throughout sciences which is particularly severe in software development and Free/Open Source Software communities. Little is know yet about the geography of this phenomenon in particular when considering large scales for both its time and space dimensions. We contribute to fill this gap with a longitudinal study of the population of contributors to publicly available software source code. We analyze the development history of 160 million software projects for a total of 2.2 billion commits contributed by 43 million distinct authors over a period of 50 years. We classify author names by gender using name frequencies and author geographical locations using heuristics based on email addresses and time zones. We study the evolution over time of contributions to public code by gender and by world region. For the world overall, we confirm previous findings about the low but steadily increasing ratio of contributions by female authors. When breaking down by world regions we find that the long-term growth of female participation is a worldwide phenomenon. We also observe a decrease in the ratio of female participation during the COVID-19 pandemic, suggesting that women's ability to contribute to public code has been more hindered than that of men.

cs.SE↗

arXiv2022

GVSoC: A Highly Configurable, Fast and Accurate Full-Platform Simulator for RISC-V based IoT Processors

The last few years have seen the emergence of IoT processors: ultra-low power systems-on-chips (SoCs) combining lightweight and flexible micro-controller units (MCUs), often based on open-ISA RISC-V cores, with application-specific accelerators to maximize performance and energy efficiency. Overall, this heterogeneity level requires complex hardware and a full-fledged software stack to orchestrate the execution and exploit platform features. For this reason, enabling agile design space exploration becomes a crucial asset for this new class of low-power SoCs. In this scenario, high-level simulators play an essential role in breaking the speed and design effort bottlenecks of cycle-accurate simulators and FPGA prototypes, respectively, while preserving functional and timing accuracy. We present GVSoC, a highly configurable and timing-accurate event-driven simulator that combines the efficiency of C++ models with the flexibility of Python configuration scripts. GVSoC is fully open-sourced, with the intent to drive future research in the area of highly parallel and heterogeneous RISC-V based IoT processors, leveraging three foundational features: Python-based modular configuration of the hardware description, easy calibration of platform parameters for accurate performance estimation, and high-speed simulation. Experimental results show that GVSoC enables practical functional and performance analysis and design exploration at the full-platform level (processors, memory, peripherals and IOs) with a speed-up of 2500x with respect to cycle-accurate simulation with errors typically below 10% for performance analysis.

eess.SY↗

arXiv2022

A Heterogeneous In-Memory Computing Cluster For Flexible End-to-End Inference of Real-World Deep Neural Networks

Deployment of modern TinyML tasks on small battery-constrained IoT devices requires high computational energy efficiency. Analog In-Memory Computing (IMC) using non-volatile memory (NVM) promises major efficiency improvements in deep neural network (DNN) inference and serves as on-chip memory storage for DNN weights. However, IMC's functional flexibility limitations and their impact on performance, energy, and area efficiency are not yet fully understood at the system level. To target practical end-to-end IoT applications, IMC arrays must be enclosed in heterogeneous programmable systems, introducing new system-level challenges which we aim at addressing in this work. We present a heterogeneous tightly-coupled clustered architecture integrating 8 RISC-V cores, an in-memory computing accelerator (IMA), and digital accelerators. We benchmark the system on a highly heterogeneous workload such as the Bottleneck layer from a MobileNetV2, showing 11.5x performance and 9.5x energy efficiency improvements, compared to highly optimized parallel execution on the cores. Furthermore, we explore the requirements for end-to-end inference of a full mobile-grade DNN (MobileNetV2) in terms of IMC array resources, by scaling up our heterogeneous architecture to a multi-array accelerator. Our results show that our solution, on the end-to-end inference of the MobileNetV2, is one order of magnitude better in terms of execution latency than existing programmable architectures and two orders of magnitude better than state-of-the-art heterogeneous solutions integrating in-memory computing analog cores.

cs.AR↗

arXiv2021

Vega: A 10-Core SoC for IoT End-Nodes with DNN Acceleration and Cognitive Wake-Up From MRAM-Based State-Retentive Sleep Mode

The Internet-of-Things requires end-nodes with ultra-low-power always-on capability for a long battery lifetime, as well as high performance, energy efficiency, and extreme flexibility to deal with complex and fast-evolving near-sensor analytics algorithms (NSAAs). We present Vega, an IoT end-node SoC capable of scaling from a 1.7 $\mathrmμ$W fully retentive cognitive sleep mode up to 32.2 GOPS (@ 49.4 mW) peak performance on NSAAs, including mobile DNN inference, exploiting 1.6 MB of state-retentive SRAM, and 4 MB of non-volatile MRAM. To meet the performance and flexibility requirements of NSAAs, the SoC features 10 RISC-V cores: one core for SoC and IO management and a 9-cores cluster supporting multi-precision SIMD integer and floating-point computation. Vega achieves SoA-leading efficiency of 615 GOPS/W on 8-bit INT computation (boosted to 1.3TOPS/W for 8-bit DNN inference with hardware acceleration). On floating-point (FP) compuation, it achieves SoA-leading efficiency of 79 and 129 GFLOPS/W on 32- and 16-bit FP, respectively. Two programmable machine-learning (ML) accelerators boost energy efficiency in cognitive sleep and active states, respectively.

cs.AR↗

arXiv2021

A Fully-Integrated 5mW, 0.8Gbps Energy-Efficient Chip-to-Chip Data Link for Ultra-Low-Power IoT End-Nodes in 65-nm CMOS

The increasing complexity of Internet-of-Things (IoT) applications and near-sensor processing algorithms is pushing the computational power of low-power, battery-operated end-node systems. This trend also reveals growing demands for high-speed and energy-efficient inter-chip communications to manage the increasing amount of data coming from off-chip sensors and memories. While traditional micro-controller interfaces such as SPIs cannot cope with tight energy and large bandwidth requirements, low-voltage swing transceivers can tackle this challenge thanks to their capability to achieve several Gbps of the communication speed at milliwatt power levels. However, recent research on high-speed serial links focused on high-performance systems, with a power consumption significantly larger than the one of low-power IoT end-nodes, or on stand-alone designs not integrated at a system level. This paper presents a low-swing transceiver for the energy-efficient and low power chip-to-chip communication fully integrated within an IoT end-node System-on-Chip, fabricated in CMOS 65nm technology. The transceiver can be easily controlled via a software interface; thus, we can consider realistic scenarios for the data communication, which cannot be assessed in stand-alone prototypes. Chip measurements show that the transceiver achieves 8.46x higher energy efficiency at 15.9x higher performance than a traditional microcontroller interface such as a single-SPI.

eess.SP↗

arXiv2021

End-to-end 100-TOPS/W Inference With Analog In-Memory Computing: Are We There Yet?

In-Memory Acceleration (IMA) promises major efficiency improvements in deep neural network (DNN) inference, but challenges remain in the integration of IMA within a digital system. We propose a heterogeneous architecture coupling 8 RISC-V cores with an IMA in a shared-memory cluster, analyzing the benefits and trade-offs of in-memory computing on the realistic use case of a MobileNetV2 bottleneck layer. We explore several IMA integration strategies, analyzing performance, area, and energy efficiency. We show that while pointwise layers achieve significant speed-ups over software implementation, on depthwise layer the inability to efficiently map parameters on the accelerator leads to a significant trade-off between throughput and area. We propose a hybrid solution where pointwise convolutions are executed on IMA while depthwise on the cluster cores, achieving a speed-up of 3x over SW execution while saving 50% of area when compared to an all-in IMA solution with similar performance.

cs.AR↗