SearcharxivSearch

arXiv subjects

Davide Sgalaberna

Publications and source records attributed to Davide Sgalaberna.

17 recordsLinked to original sources

Deep-learning-based low-energy trigger algorithms for the Hyper-Kamiokande experiment

Modern machine learning techniques have become increasingly important in particle physics because of their powerful pattern-recognition capabilities, including in real-time data acquisition where stringent runtime constraints apply. This paper details the performance of deep-learning-based trigger algorithms for a large water Cherenkov detector such as Hyper-Kamiokande aimed at low-energy neutrino events (below 7 MeV). The performance of custom neural-network supervised classifiers is shown alongside two anomaly-detection approaches trained solely on detector noise: a pure autoencoder and an energy-based model based on Manifold Projection--Diffusion Recovery (MPDR). The supervised model shows signal identification efficiencies of 76.7% for single electrons of 3 MeV kinetic energy, significantly exceeding signal efficiencies obtained from a traditional hit-count-based trigger of 26.4%, as does the MPDR approach with 31.8%. Runtime evaluations on GPU yield per-window inference latencies well below the millisecond scale, indicating that real-time operation is feasible.

physics.ins-det

PlatonSPAD: A novel SPAD sensor for large-scale high-resolution particle detectors

High-resolution 3D tracking with sub-nanosecond timing is required for the detection of elementary particles, such as neutrinos. Conventional detectors, which utilize analog silicon photomultipliers, face challenges in balancing spatial resolution and scalability. To address this issue, a CMOS single-photon avalanche diode (SPAD)-based high-resolution particle detector is being developed. This work presents a study on SPAD layout optimization and a 4x4 SPAD macropixel module, fabricated in 110 nm CIS technology. Measurement results confirm that high-fill-factor designs improve photon detection efficiency without significant noise degradation. Furthermore, event-driven photon mapping and time stamping, enabled by time-to-digital converters and dedicated pixel circuits integrated into the 4x4 SPAD macropixel, were successfully demonstrated. This work is an essential step towards a sensor that detects probabilistic particle interactions and it lays the groundwork for the development of future large-scale SPAD-based particle detectors.

physics.ins-det

An ultrafast plenoptic-camera system for high-resolution 3D particle tracking in unsegmented scintillators

Neutrino detectors, particle calorimeters and some dark matter detectors require dense and massive active materials. An extremely fine segmentation is desirable to achieve precise three-dimensional particle tracking. However, such systems introduce significant challenges in construction and demand a large number of readout electronics channels, leading to extremely high costs. In this article, we propose an alternative approach to elementary particle detection that enables ultrafast three-dimensional high-resolution imaging in large volumes of unsegmented scintillator. Enabling technologies are plenoptic systems and time-resolving single-photon avalanche diode array imaging sensors. Together, they enabled us, using a plenoptic camera, to reconstruct the origin of single photons in the scintillator. A case study focused on neutrino detection demonstrates full event reconstruction with a spatial resolution of two hundred micrometres. This work paves the way for a class of particle detectors whose capabilities should be further enhanced through future developments and expanded to Cherenkov light detection, medical imaging and neutron detection.

physics.ins-det

A 3D segmented Water-based Liquid Scintillator for high-precision detection of neutrinos in water

Precision detection of neutrino-nucleus interactions in water with the complete detection of the final state, including leptons and hadrons, is challenging due to water being a non-scintillating medium. This can be a limitation for the next-generation long-baseline neutrino oscillation experiments, such as Hyper-Kamiokande, where the neutrino-nucleus interaction models must reach a few percent-level accuracy. Water-based liquid scintillator can be a game changer for the future near detectors. In this article, we propose a novel design consisting of a 3D highly-segmented water-based liquid scintillator. The water-based liquid scintillator is encapsulated within a highly-segmented rigid but very light structure that provides the optical isolation with a 1 cm$^{3}$ granularity, each read out by orthogonal wavelength shifting fibers, and 81\% of water by mass in the active volume. Such configuration is also suitable for pure liquid scintillator. The detector design, prototyped and validated with cosmic ray data, is described and results are reported. The optical model is studied with Monte Carlo simulations and results are compared with the collected data.

physics.ins-det

Latest neutrino results from the FASER experiment and their implications for forward hadron production

The muon puzzle -- an excess of muons relative to simulation predictions in ultra-high-energy cosmic-ray air showers -- has been reported by many experiments. This suggests that forward particle production in hadronic interactions is not fully understood. Some of the scenarios proposed to resolve this predict reduced production of forward neutral pions and enhanced production of forward kaons (or other particles). The FASER experiment at the LHC is located 480 m downstream of the ATLAS interaction point and is sensitive to neutrinos and muons, which are the decay products of forward charged pions and kaons. In this study, the latest measurements of electron and muon neutrino fluxes are presented using the data corresponding to 9.5 $\mathrm{fb^{-1}}$ and 65.6 $\mathrm{fb^{-1}}$ of proton-proton collisions with $\sqrt{s}=13.6~\mathrm{TeV}$ by the FASER$\nu$ and the FASER electronic detector, respectively. These fluxes are compared with predictions from recent hadronic interaction models, including EPOS-LHCr, SIBYLL 2.3e, and QGSJET 3. The predictions are generally consistent with the measured fluxes from FASER, although some discrepancies appear in certain energy bins. More precise flux measurements with additional data will follow soon, enabling validation of pion, kaon, and charm meson production with finer energy binning, reduced uncertainties, and multi-differential analyses.

hep-ex

Prospects and Opportunities with an upgraded FASER Neutrino Detector during the HL-LHC era: Input to the EPPSU

The FASER experiment at CERN has opened a new window in collider neutrino physics by detecting TeV-energy neutrinos produced in the forward direction at the LHC. Building on this success, this document outlines the scientific case and design considerations for an upgraded FASER neutrino detector to operate during LHC Run 4 and beyond. The proposed detector will significantly enhance the neutrino physics program by increasing event statistics, improving flavor identification, and enabling precision measurements of neutrino interactions at the highest man-made energies. Key objectives include measuring neutrino cross sections, probing proton structure and forward QCD dynamics, testing lepton flavor universality, and searching for beyond-the-Standard Model physics. Several detector configurations are under study, including high-granularity scintillator-based tracking calorimeters, high-precision silicon tracking layers, and advanced emulsion-based detectors for exclusive event reconstruction. These upgrades will maximize the physics potential of the HL-LHC, contribute to astroparticle physics and QCD studies, and serve as a stepping stone toward future neutrino programs at the Forward Physics Facility.

hep-ex

Beam test results of a fully 3D-printed plastic scintillator particle detector prototype

Plastic scintillators are widely used for the detection of elementary particles, and 3D reconstruction of particle tracks is achieved by segmenting the detector into 3D granular structures. In this study, we present a novel prototype fabricated by additive manufacturing, consisting of a 5 x 5 x 5 array of 1 cm3 plastic scintillator cubes, each optically isolated. This innovative approach eliminates the need to construct complex monolithic geometries in a single operation and gets rid of the traditional time-consuming manufacturing and assembling processes. The prototype underwent performance characterization during a beam test at CERN's Proton-Synchrotron facility. Light yield, optical crosstalk, and light response uniformity, were evaluated. The prototype demonstrated a consistent light yield of approximately 27 photoelectrons (p.e.) per channel, similar to traditional cast scintillator detectors. Crosstalk between adjacent cubes averaged 4-5%, and light yield uniformity within individual cubes exhibited about 7% variation, indicating stability and reproducibility. These results underscore the potential of the novel additive manufacturing technique, for efficient and reliable production of high-granularity scintillator detectors.

physics.ins-det

First Measurement of the Muon Neutrino Interaction Cross Section and Flux as a Function of Energy at the LHC with FASER

This letter presents the measurement of the energy-dependent neutrino-nucleon cross section in tungsten and the differential flux of muon neutrinos and anti-neutrinos. The analysis is performed using proton-proton collision data at a center-of-mass energy of $13.6 \, {\rm TeV}$ and corresponding to an integrated luminosity of $(65.6 \pm 1.4) \, \mathrm{fb^{-1}}$. Using the active electronic components of the FASER detector, $338.1 \pm 21.0$ charged current muon neutrino interaction events are identified, with backgrounds from other processes subtracted. We unfold the neutrino events into a fiducial volume corresponding to the sensitive regions of the FASER detector and interpret the results in two ways: We use the expected neutrino flux to measure the cross section, and we use the predicted cross section to measure the neutrino flux. Both results are presented in six bins of neutrino energy, achieving the first differential measurement in the TeV range. The observed distributions align with Standard Model predictions. Using this differential data, we extract the contributions of neutrinos from pion and kaon decays.

hep-ex

Shining Light on the Dark Sector: Search for Axion-like Particles and Other New Physics in Photonic Final States with FASER

The first FASER search for a light, long-lived particle decaying into a pair of photons is reported. The search uses LHC proton-proton collision data at $\sqrt{s}=13.6~\text{TeV}$ collected in 2022 and 2023, corresponding to an integrated luminosity of $57.7\text{fb}^{-1}$. A model with axion-like particles (ALPs) dominantly coupled to weak gauge bosons is the primary target. Signal events are characterised by high-energy deposits in the electromagnetic calorimeter and no signal in the veto scintillators. One event is observed, compared to a background expectation of $0.44 \pm 0.39$ events, which is entirely dominated by neutrino interactions. World-leading constraints on ALPs are obtained for masses up to $300~\text{MeV}$ and couplings to the Standard Model W gauge boson, $g_{aWW}$, around $10^{-4}$ GeV$^{-1}$, testing a previously unexplored region of parameter space. Other new particle models that lead to the same experimental signature, including ALPs coupled to gluons or photons, U(1)$_B$ gauge bosons, up-philic scalars, and a Type-I two-Higgs doublet model, are also considered for interpretation, and new constraints on previously viable parameter space are presented in this paper.

hep-ex

AI-based particle track identification in scintillating fibres read out with imaging sensors

This paper presents the development and application of an AI-based method for particle track identification using scintillating fibres read out with imaging sensors. We propose a variational autoencoder (VAE) to efficiently filter and identify frames containing signal from the substantial data generated by SPAD array sensors. Our VAE model, trained on purely background frames, demonstrated a high capability to distinguish frames containing particle tracks from background noise. The performance of the VAE-based anomaly detection was validated with experimental data, demonstrating the method's ability to efficiently identify relevant events with rapid processing time, suggesting a solid prospect for deployment as a fast inference tool on hardware for real-time anomaly detection. This work highlights the potential of combining advanced sensor technology with machine learning techniques to enhance particle detection and tracking.

cs.LG

Additive manufacturing of a 3D-segmented plastic scintillator detector for tracking and calorimetry of elementary particles

Plastic-scintillator detectors are devices used for the detection of elementary particles. They provide good particle identification with excellent time resolution, whilst being inexpensive due to the affordability of plastic materials. Particle tracking is achieved by segmenting the scintillator into smaller optically-isolated 3D granular sub-structures which require the integration of multiple types of plastic materials as well as several thousands of tiny holes through a compact volume of several cubic meters. Future particle detectors necessitate larger volumes, possibly with even finer segmentation. However, manufacturing such geometries with current production strategies is challenging, as they involve time-consuming and costly fabrication processes, followed by the assembly of millions of individual parts. The difficulty in scaling up such a workflow can be addressed by additive manufacturing, enabling the construction of complex, monolithic geometries in a single operation. This article presents the fabrication of the first additive manufactured plastic scintillator detector, capable of 3D tracking elementary particles and measuring their stopping power. Its performance is comparable to the state of the art of plastic scintillator detectors. This work paves the way towards a new feasible, time and cost-effective process for the production of future plastic-based scintillator detectors, regardless their size and difficulty in geometry.

physics.ins-det

Demonstration of particle tracking with scintillating fibres read out by a SPAD array sensor and application as a neutrino active target

Scintillating fibre detectors combine sub-mm resolution particle tracking, precise measurements of the particle stopping power and sub-ns time resolution. Typically, fibres are read out with silicon photomultipliers (SiPM). Hence, if fibres with a few hundred $μ$m diameter are used, either they are grouped together and coupled with a single SiPM, losing spatial resolution, or a very large number of electronic channels is required. In this article we propose and provide a first demonstration of a novel configuration which allows each individual scintillating fibre to be read out regardless of the size of its diameter, by imaging them with Single-Photon Avalanche Diode (SPAD) array sensors. Differently from SiPMs, SPAD array sensors provide single-photon detection with single-pixel spatial resolution. In addition, O(us) or faster coincidence of detected photons allows to obtain noise-free images. Such a concept can be particularly advantageous if adopted as a neutrino active target, where scintillating fibres alternated along orthogonal directions can provide isotropic, high-resolution tracking in a dense material and reconstruct the kinematics of low-momentum protons (down to 150 MeV/c), crucial for an accurate characterisation of the neutrino nucleus cross section. In this work the tracking capabilities of a bundle of scintillating fibres coupled to SwissSPAD2 is demonstrated. The impact of such detector configuration in GeV-neutrino experiments is studied with simulations and reported. Finally, future plans, including the development of a new SPAD array sensor optimised for neutrino detection, are discussed.

physics.ins-det

Deep-learning-based decomposition of overlapping-sparse images: application at the vertex of neutrino interactions

Image decomposition plays a crucial role in various computer vision tasks, enabling the analysis and manipulation of visual content at a fundamental level. Overlapping images, which occur when multiple objects or scenes partially occlude each other, pose unique challenges for decomposition algorithms. The task intensifies when working with sparse images, where the scarcity of meaningful information complicates the precise extraction of components. This paper presents a solution that leverages the power of deep learning to accurately extract individual objects within multi-dimensional overlapping-sparse images, with a direct application in high-energy physics with decomposition of overlaid elementary particles obtained from imaging detectors. In particular, the proposed approach tackles a highly complex yet unsolved problem: identifying and measuring independent particles at the vertex of neutrino interactions, where one expects to observe detector images with multiple indiscernible overlapping charged particles. By decomposing the image of the detector activity at the vertex through deep learning, it is possible to infer the kinematic parameters of the identified low-momentum particles - which otherwise would remain neglected - and enhance the reconstructed energy resolution of the neutrino event. We also present an additional step - that can be tuned directly on detector data - combining the above method with a fully-differentiable generative model to improve the image decomposition further and, consequently, the resolution of the measured parameters, achieving unprecedented results. This improvement is crucial for precisely measuring the parameters that govern neutrino flavour oscillations and searching for asymmetries between matter and antimatter.

cs.CV

Longitudinal kinematic imbalances in neutrino and antineutrino interactions for improved measurements of neutrino energy and the axial vector form factor

Current and future accelerator neutrino oscillation experiments require an improved understanding of nuclear effects in neutrino-nucleus interactions. One important systematic uncertainty is introduced by the collective impact of nuclear effects which bias the reconstruction of the neutrino energy, such as the nuclear removal energy. In this manuscript, we introduce a novel observable for accelerator neutrino oscillation experiments, the visible longitudinal momentum imbalance, reconstructed in charged current quasi-elastic interactions from the outgoing charged lepton and nucleon. We demonstrate it to be minimally dependent on the neutrino energy and sensitive to sources of bias in neutrino energy reconstruction. Furthermore, we show how the use of the longitudinal imbalance in antineutrino interactions in a target containing hydrogen allows for an improved, high-purity selection of the interactions on hydrogen. This approach offers the potential for precise measurements of the nuclear axial vector form factor as well as of the antineutrino flux.

hep-ph

The role of de-excitation in the final-state interactions of protons in neutrino-nucleus interactions

Present and next generation of long-baseline accelerator experiments are bringing the measurement of neutrino oscillations into the precision era with ever-increasing statistics. One of the most challenging aspects of achieving such measurements is developing relevant systematic uncertainties in the modeling of nuclear effects in neutrino-nucleus interactions. To address this problem, state-of-the-art detectors are being developed to extract detailed information about all particles produced in neutrino interactions. To fully profit from these experimental advancements, it is essential to have reliable models of propagation of the outgoing hadrons through nuclear matter able to predict how the energy is distributed between all the final-state observed particles. In this article, we investigate the role of nuclear de-excitation in neutrino-nucleus scattering using two Monte Carlo cascade models: NuWro and INCL coupled with the de-excitation code ABLA. The ablation model ABLA is used here for the first time to model de-excitation in neutrino interactions. As input to ABLA, we develop a consistent simulation of nuclear excitation energy tuned to electron-scattering data. The paper includes the characterization of the leading proton kinematics and of the nuclear cluster production during cascade and de-excitation. The observability of nuclear clusters as vertex activity and their role in a precise neutrino energy reconstruction is quantified.

hep-ph

Artificial intelligence for improved fitting of trajectories of elementary particles in inhomogeneous dense materials immersed in a magnetic field

In this article, we use artificial intelligence algorithms to show how to enhance the resolution of the elementary particle track fitting in inhomogeneous dense detectors, such as plastic scintillators. We use deep learning to replace more traditional Bayesian filtering methods, drastically improving the reconstruction of the interacting particle kinematics. We show that a specific form of neural network, inherited from the field of natural language processing, is very close to the concept of a Bayesian filter that adopts a hyper-informative prior. Such a paradigm change can influence the design of future particle physics experiments and their data exploitation.

physics.data-an

Graph neural network for 3D classification of ambiguities and optical crosstalk in scintillator-based neutrino detectors

Deep learning tools are being used extensively in high energy physics and are becoming central in the reconstruction of neutrino interactions in particle detectors. In this work, we report on the performance of a graph neural network in assisting with particle flow event reconstruction. The three-dimensional reconstruction of particle tracks produced in neutrino interactions can be subject to ambiguities due to high multiplicity signatures in the detector or leakage of signal between neighboring active detector volumes. Graph neural networks potentially have the capability of identifying all these features to boost the reconstruction performance. As an example case study, we tested a graph neural network, inspired by the GraphSAGE algorithm, on a novel 3D-granular plastic-scintillator detector, that will be used to upgrade the near detector of the T2K experiment. The developed neural network has been trained and tested on diverse neutrino interaction samples, showing very promising results: the classification of particle track voxels produced in the detector can be done with efficiencies and purities of 94-96% per event and most of the ambiguities can be identified and rejected, while being robust against systematic effects.

physics.data-an