SearcharxivSearch

arXiv subjects

Davide Sisana

Publications and source records attributed to Davide Sisana.

2 recordsLinked to original sources

Optomechanical Design of the MANTIS SmallSat: An Extreme-, Far- and Near-Ultraviolet Spectrograph for Exoplanet Host Stars

The MANTIS (Monitoring Activity of Nearby sTars with uv Imaging and Spectroscopy) observatory is a compact, multi-instrument small satellite designed for simultaneous extreme- (EUV; 100 - 560 Angstrom), far- (FUV; 1150-1800 Angstrom) and near-ultraviolet/visible (NUV/VIS; 2000-6400 Angstrom) spectroscopy of low-mass stars. The EUV optical system consists of a first-of-its-kind Hettrick-Bowyer grazing incidence telescope contributed by the Italian National Institute for Astrophysics (INAF) feeding an advanced e-beam lithographic etched variable line spacing grating developed at Pennsylvania State University (PSU). The resulting low-resolution spectrum is imaged on an advanced microchannel plate detector with a potassium iodide (KI) photocathode for extremely low background noise, resulting in a limiting sensitivity for MANTIS that exceeds that of the last EUV-sensitive astrophysics point-source spectrograph, the Deep Survey/Spectrometer (DS/S) on EUVE. The FUV and NUV/Optical channels are fed by a compact rectangular telescope that focuses onto a series of point-source apertures. The diverging beam is refocused and the FUV band dispersed by a holographic grating, then folded back onto the same detector as the EUV channel by a toroidal fold mirror. The zero-order light is picked off by a flat NUV grating, with the NUV/Optical spectrum recorded on an e2v CCD 42-10 detector. The MANTIS spacecraft is a custom build that leverages the experience derived from prior University of Colorado - LASP SmallSats for avionics, power, communications, and mechanical structure. MANTIS is projected to be completed in 2027 with an anticipated 2028 launch as an ESPA-class payload on a rideshare opportunity.

astro-ph.IM

Effect of chromatic dispersion on image size and lattice plane curvature measurements with Rocking Curve Imaging

ADP crystals of large dimensions (80x80x20 mm3), to be used as a X-ray beam expanders in the BEaTriX facility at INAF-OABrera, have been characterised at BM05 beamline at ESRF synchrotron with the main purpose to determine lattice plane curvature with a unprecedent accuracy, as the BEaTriX setup requires a radius of curvature larger than 22 km. In this beamline, the monochromator is made by 2 Si(111) parallel crystals in the non-dispersive configuration. Due to the difference in the Bragg angles between the Si(111) monochromator and the ADP(008) diffractions, only a limited part of the sample area, hit by the X-ray beam (11x11 mm2 cross section), produced a diffracted beam for a given value of angle of incidence. In the rocking curve imaging techniques, a full image of the sample for a given peak position is obtained by combining images taken at different angles of incidence compensated by the dispersion correction, that is the Bragg condition difference in different points of the sample. It is found that the resulting image size parallel to the scattering plane is affected by this dispersion correction. A 4.5 % elongation along the scattering plane was evaluated in the present Bragg case. This contribution is opposite in the Laue case.

physics.ins-det