arXiv subjects

Debora Pierucci

Publications and source records attributed to Debora Pierucci.

At least 19 recordsLinked to original sources

arXiv2026

Tuning the Charge Transfer of Transition Metal Dichalcogenides via Misfit Layer Compounds

Misfit layer compounds (MLCs) are a versatile platform for exploring the electronic phase diagram of two dimensional (2D) materials beyond the limits of conventional gating techniques. This work demonstrates the precise tunability of electron doping in NbSe2 monolayers through chemical alloying within the rocksalt layer of (LaxPb1xSe)1.14(NbSe2)2 heterostructures. By combining first principles density functional theory (DFT) calculations with angle resolved photoemission spectroscopy (ARPES), we prove that the rocksalt unit acts as an universal electron donor. We show that varying the La Pb ratio results in a rigid Fermi level shift, still preserving the NbSe2 electronic structure. Crucially, photon energy dependent ARPES confirms that the NbSe2 layers nearly maintain their intrinsic 2D character and orbital identity within the three dimensional misfit. This study establishes MLCs as a reliable platform for engineering emergent states in 2D transition metal dichalcogenides through precise stoichiometric control.

cond-mat.mtrl-sci↗

arXiv2026

Emergent 3D Fermiology and Magnetism in an Intercalated Van der Waals System

Intercalation of magnetic atoms into van der Waals materials provides a versatile platform for tailoring unconventional magnetic properties. However, its impact on electronic dimensionality and exchange mechanisms remains poorly understood. Using Fe-intercalated TaS$_2$ as a model system, we combine X-ray absorption and resonant inelastic scattering with angle-resolved photoemission and first-principles calculations to reveal that intercalation reshapes the host electronic structure. We identify a spin-polarized intercalant-host hybridized band with pronounced out-of-plane dispersion crossing the Fermi level, providing an itinerant channel for interlayer magnetic exchange. This mechanism explains the breakdown of a purely atomic picture and establishes a direct link between lattice geometry, electronic dispersion, and magnetic order. Our findings demonstrate that intercalant-induced itinerancy enables tunable interlayer coupling in otherwise layered magnets, offering a general microscopic framework for engineering magnetic dimensionality in a broad class of intercalated vdW materials.

cond-mat.mtrl-sci↗

arXiv2024

Darkness in interlayer and charge density wave states of 2H-TaS2

The wave-like nature of electrons is evident from quantum interference effects observed during the photoemission process. When there are different nuclei in the unit cell of a crystal and/or structural distortions, photo-electron wavefunctions can interfere, giving rise to peculiar intensity modulation of the spectrum, which can also hide energy states in a photoemission experiment. The 2H phase of transition metal dichalcogenides, with two nonequivalent layers per unit cell and charge density wave distortion, is an optimal platform for such effects to be observed. Here, we discover undetectable states in 2H-TaS2, interpreting high-resolution angular resolved photoemission spectroscopy considering interference effects of the correlated electron wave functions. In addition, phase mismatching induced by the charge density wave distortion, results in evident signature of the phase transition in the photoemission spectrum. Our results highlight the importance of quantum interference, electronic correlations and structural distortion to understand the physics of layered materials.

cond-mat.str-el↗

arXiv2024

Infrared Imaging using thermally stable HgTe/CdS nanocrystals

Transferring the nanocrystals (NCs) from the laboratory environment toward practical applications has raised new challenges. In the case of NCs for display and lightning, the focus was on reduced Auger recombination and maintaining luminescence at high temperatures. When it comes to infrared sensing, narrow band gap materials are required and HgTe appears as the most spectrally tunable platform. Its low-temperature synthesis reduces the growth energy cost yet also favors sintering. As a result, once coupled to a read-out circuit, the Joule effect aggregates the particles leading to a poorly defined optical edge and dramatically large dark current. Here, we demonstrate that CdS shells bring the expected thermal stability (no redshift upon annealing, reduced tendency to form amalgams and preservation of photoconduction after an atomic layer deposition process). The peculiar electronic structure of these confined particles is unveiled using k.p self-consistent simulations showing a significant exciton biding energy at around 200 meV. After shelling, the material displays a p-type behavior that favors the generation of photoconductive gain. The latter is then used to increase the external quantum

physics.app-ph↗

arXiv2023

Hydrogenic Spin-Valley states of the Bromine donor in 2H-MoTe$_2$

In semiconductors, the identification of doping atomic elements allowing to encode a qubit within spin states is of intense interest for quantum technologies. In transition metal dichalcogenides semiconductors, the strong spin-orbit coupling produces locked spin-valley states with expected long coherence time. Here we study the substitutional Bromine Br\textsubscript{Te} dopant in 2H-MoTe$_2$. Electron spin resonance measurements show that this dopant carries a spin with long-lived nanoseconds coherence time. Using scanning tunneling spectroscopy, we find that the hydrogenic wavefunctions associated with the dopant levels have characteristics spatial modulations that result from their hybridization to the \textbf{Q}-valleys of the conduction band. From a Fourier analysis of the conductance maps, we find that the amplitude and phase of the Fourier components change with energy according to the different irreducible representations of the impurity-site point-group symmetry. These results demonstrate that a dopant can inherit the locked spin-valley properties of the semiconductor and so exhibit long spin-coherence time.

cond-mat.mes-hall↗

arXiv2022

Unidirectional Rashba Spin Splitting in Single Layer WS$_{2(1-x)}$Se$_{2x}$ alloy

Atomically thin two-dimensional (2D) layered semiconductors such as transition metal dichalcogenides (TMDs) have attracted considerable attention due to their tunable band gap, intriguing spin-valley physics, piezoelectric effects and potential device applications. Here we study the electronic properties of a single layer WS$_{1.4}$Se$_{0.6}$ alloys. The electronic structure of this alloy, explored using angle resolved photoemission spectroscopy, shows a clear valence band structure anisotropy characterized by two paraboloids shifted in one direction of the k-space by a constant in-plane vector. This band splitting is a signature of a unidirectional Rashba spin splitting with a related giant Rashba parameter of 2.8 0.7 eV . The combination of angle resolved photoemission spectroscopy with piezo force microscopy highlights the link between this giant unidirectional Rashba spin splitting and an in-plane polarization present in the alloy. These peculiar anisotropic properties of the WS$_{1.4}$Se$_{0.6}$ alloy can be related to local atomic orders induced during the growth process due the different size and electronegativity between S and Se atoms. This distorted crystal structure combined to the observed macroscopic tensile strain, as evidenced by photoluminescence, displays electric dipoles with a strong in-plane component, as shown by piezoelectric microscopy. The interplay between semiconducting properties, in-plane spontaneous polarization and giant out-of-plane Rashba spin-splitting in this two-dimensional material has potential for a wide range of applications in next-generation electronics, piezotronics and spintronics devices.

cond-mat.mtrl-sci↗

arXiv2022

Visualizing giant ferroelectric gating effects in large-scale WSe$_2$/BiFeO$_3$ heterostructures

Multilayers based on quantum materials (complex oxides, topological insulators, transition-metal dichalcogenides, etc) have enabled the design of devices that could revolutionize microelectronics and optoelectronics. However, heterostructures incorporating quantum materials from different families remain scarce, while they would immensely broaden the range of possible applications. Here we demonstrate the large-scale integration of compounds from two highly-multifunctional families: perovskite oxides and transition-metal dichalcogenides (TMDs). We couple BiFeO$_3$, a room-temperature multiferroic oxide, and WSe$_2$, a semiconducting two-dimensional material with potential for photovoltaics and photonics. WSe$_2$ is grown by molecular beam epitaxy and transferred on a centimeter-scale onto BiFeO$_3$ films. Using angle-resolved photoemission spectroscopy, we visualize the electronic structure of 1 to 3 monolayers of WSe$_2$ and evidence a giant energy shift as large as 0.75 eV induced by the ferroelectric polarization direction in the underlying BiFeO$_3$. Such a strong shift opens new perspectives in the efficient manipulation of TMDs properties by proximity effects.

cond-mat.mtrl-sci↗

arXiv2022

Evidence for Highly p-type doping and type II band alignment in large scale monolayer WSe2 /Se-terminated GaAs heterojunction grown by Molecular beam epitaxy

Two-dimensional materials (2D) arranged in hybrid van der Waals (vdW) heterostructures provide a route toward the assembly of 2D and conventional III-V semiconductors. Here, we report the structural and electronic properties of single layer WSe2 grown by molecular beam epitaxy on Se-terminated GaAs(111)B. Reflection high-energy electron diffraction images exhibit sharp streaky features indicative of a high-quality WSe2 layer produced via vdW epitaxy. This is confirmed by in-plane x-ray diffraction. The single layer of WSe2 and the absence of interdiffusion at the interface are confirmed by high resolution X-ray photoemission spectroscopy and high-resolution transmission microscopy. Angle-resolved photoemission investigation revealed a well-defined WSe2 band dispersion and a high p-doping coming from the charge transfer between the WSe2 monolayer and the Se-terminated GaAs substrate. By comparing our results with local and hybrid functionals theoretical calculation, we find that the top of the valence band of the experimental heterostructure is close to the calculations for free standing single layer WSe2. Our experiments demonstrate that the proximity of the Se-terminated GaAs substrate can significantly tune the electronic properties of WSe2. The valence band maximum (VBM, located at the K point of the Brillouin zone) presents an upshifts of about 0.56 eV toward the Fermi level with respect to the VBM of WSe2 on graphene layer, which is indicative of high p-type doping and a key feature for applications in nanoelectronics and optoelectronics.

cond-mat.mes-hall↗

arXiv2022

Hybridization and localized flat band in the WSe2/MoSe2 heterobilayer grown by molecular beam epitaxy

Nearly localized moire flat bands in momentum space, arising at particular twist angles, are the key to achieve correlated effects in transition-metal dichalcogenides. Here, we use angle-resolved photoemission spectroscopy (ARPES) to visualize the presence of a flat band near the Fermi level of van der Waals (vdW) WSe2/MoSe2 heterobilayer grown by molecular beam epitaxy. This flat band is localized near the K point of the Brillouin zone and has a width of several hundred meVs. By combining ARPES measurements with density functional theory (DFT) calculations, we confirm the coexistence of different domains, namely the reference 2H stacking without layer misorientation and regions with arbitrary twist angles. For the 2H-stacked heterobilayer, our ARPES results show strong interlayer hybridization effects, further confirmed by complementary micro- Raman spectroscopy measurements. The spin-splitting of the valence band at K is determined to be 470 meV. The valence band maximum (VBM) position of the heterobilayer is located at the Gamma point. The energy difference between the VBM at Gamma and the K point is of -60 meV, which is a stark difference compared to individual 1L WSe2 and 1L WSe2, showing both a VBM at K.

cond-mat.mtrl-sci↗

arXiv2020

Indirect to direct band gap crossover in two-dimensional WS2(1-x)Se2x alloys

In atomically thin transition metal dichalcogenide semiconductors, there is a crossover from indirect to direct bandgap as the thickness drops to one monolayer, which comes with a fast increase of the photoluminescence signal. Here, we show that for different alloy compositions of WS2(1-x)Se2x this trend may be significantly affected by the alloy content and we demonstrate that the sample with the highest Se ratio presents a strongly reduced effect. The highest micro-PL intensity is found for bilayer WS2(1-x)Se2x (x = 0.8) with a decrease of its maximum value by only a factor of 2 when passing from mono- to bi-layer. To better understand this factor and explore the layer-dependent band structure evolution of WS2(1-x)Se2x, we performed a nano-angle resolved photoemission spectroscopy study coupled with first-principles calculations. We find that the high micro-PL value for bilayer WS2(1-x)Se2x (x = 0.8) is due to the overlay of direct and indirect optical transitions. This peculiar high PL intensity in WS2(1-x)Se2x opens the way for spectrally tunable light-emitting devices.

cond-mat.mes-hall↗

arXiv2019

Nanomechanical strain concentration on a 2D nanobridge within a large suspended bilayer graphene for molecular mass detection

The recent emergence of strain gradient engineering directly affects the nanomechanics, optoelectronics and thermal transport fields in 2D materials. More specifically, large suspended graphene under very high stress represents the quintessence for nanomechanical mass detection through unique molecular reactions. Different techniques have been used to induce strain in 2D materials, for instance by applying tip indentation, pressure or substrate bending on a graphene membrane. Nevertheless, an efficient way to control the strain of a structure is to engineer the system geometry as shown in everyday life in architecture and acoustics. Similarly, we studied the concentration of strain in artificial nanoconstrictions (~100 nm) in a suspended epitaxial bilayer graphene membrane with different geometries and lengths ranging from 10 to 40 micrometer. We carefully isolated the strain signature from micro-Raman measurements and extracted information on a scale below the laser spot size by analyzing the broadened shape of our Raman peaks, up to 100 cm-1. We potentially measured a strong strain concentration in a nanoconstriction up to 5percent, which is 20 times larger than the native epitaxial graphene strain. Moreover, with a bilayer graphene, our configuration naturally enhanced the native asymmetric strain between the upper and lower graphene layers. In contrast to previous results, we can achieve any kind of complex strain tensor in graphene thanks to our structural approach. This method completes the previous strain-induced techniques and opens up new perspectives for bilayer graphene and 2D heterostructures based devices.

cond-mat.mes-hall↗

arXiv2019

Evidence of Direct Electronic Band Gap in two-dimensional van der Waals Indium Selenide crystals

Metal mono-chalcogenide compounds offer a large variety of electronic properties depending on chemical composition, number of layers and stacking-order. Among them, the InSe has attracted much attention due to the promise of outstanding electronic properties, attractive quantum physics, and high photo-response. Metal mono-chalcogenide compounds offer a large variety of electronic properties depending on chemical composition, number of layers and stacking-order. Among them, the InSe has attracted much attention due to the promise of outstanding electronic properties, attractive quantum physics, and high photo-response. Precise experimental determination of the electronic structure of InSe is sorely needed for better understanding of potential properties and device applications. Here, combining scanning tunneling spectroscopy (STS) and two-photon photoemission spectroscopy (2PPE), we demonstrate that InSe exhibits a direct band gap of about 1.25 eV located at the Gamma point of the Brillouin zone (BZ). STS measurements underline the presence of a finite and almost constant density of states (DOS) near the conduction band minimum (CBM) and a very sharp one near the maximum of the valence band (VMB). This particular DOS is generated by a poorly dispersive nature of the top valence band, as shown by angle resolved photoemission spectroscopy (ARPES) investigation. technologies. In fact, a hole effective mass of about m/m0 = -0.95 gammaK direction) was measured. Moreover, using ARPES measurements a spin-orbit splitting of the deeper-lying bands of about 0.35 eV was evidenced. These findings allow a deeper understanding of the InSe electronic properties underlying the potential of III-VI semiconductors for electronic and photonic

cond-mat.mes-hall↗

arXiv2018

Flat Electronic Bands in Long Sequences of Rhombohedral-stacked Multilayer Graphene

The crystallographic stacking order in multilayer graphene plays an important role in determining its electronic properties. It has been predicted that a rhombohedral (ABC) stacking displays a conducting surface state with flat electronic dispersion. In such a flat band, the role of electron-electron correlation is enhanced possibly resulting in high Tc superconductivity, charge density wave or magnetic orders. Clean experimental band structure measurements of ABC stacked specimens are missing because the samples are usually too small in size. Here, we directly image the band structure of large multilayer graphene flake containing approximately 14 consecutive ABC layers. Angle-resolved photoemission spectroscopy experiments reveal the flat electronic bands near the K point extends by 0.13 Å-1 at the Fermi level at liquid nitrogen temperature. First-principle calculations identify the electronic ground state as an antiferromagnetic state with a band gap of about 40 meV.

cond-mat.mtrl-sci↗

arXiv2018

Van der Waals epitaxy of two-dimensional single-layer h-BN on graphite by molecular beam epitaxy: Electronic properties and band structure

We report on the controlled growth of h-BN/graphite by means of molecular beam epitaxy (MBE). X-ray photoelectron spectroscopy (XPS) suggests an interface without any reaction or intermixing, while the angle resolved photoemission spectroscopy (ARPES) measurements show that the h-BN layers are epitaxially aligned with graphite. A well-defined band structure is revealed by ARPES measurement, reflecting the high quality of the h-BN films. The measured valence band maximum (VBM) located at 2.8 eV below the Fermi level reveals the presence of undoped h-BN films (band gap ~ 6 eV). These results demonstrate that, although only weak van der Waals interactions are present between h-BN and graphite, a long range ordering of h-BN can be obtained even on polycrystalline graphite via van der Waals epitaxy, offering the prospect of large area, single layer h-BN.

cond-mat.mtrl-sci↗

arXiv2018

Electronic band structure of Two-Dimensional WS2/Graphene van der Waals Heterostructures

Combining single-layer two-dimensional semiconducting transition metal dichalcogenides (TMDs) with graphene layer in van der Waals heterostructures offers an intriguing means of controlling the electronic properties through these heterostructures. Here, we report the electronic and structural properties of transferred single layer WS2 on epitaxial graphene using micro-Raman spectroscopy, angle-resolved photoemission spectroscopy measurements (ARPES) and Density Functional Theory (DFT) calculations. The results show good electronic properties as well as well-defined band arising from the strong splitting of the single layer WS2 valence band at K points, with a maximum splitting of 0.44 eV. By comparing our DFT results with local and hybrid functionals, we find the top valence band of the experimental heterostructure is close to the calculations for suspended single layer WS2. . Our results provide an important reference for future studies of electronic properties of WS2 and its applications in valleytronic devices.

cond-mat.mtrl-sci↗

arXiv2018

Tunable Doping in Hydrogenated Single Layered Molybdenum Disulfide

Structural defects in the molybdenum disulfide (MoS2) monolayer are widely known for strongly altering its properties. Therefore, a deep understanding of these structural defects and how they affect MoS2 electronic properties is of fundamental importance. Here, we report on the incorporation of atomic hydrogen in mono-layered MoS2 to tune its structural defects. We demonstrate that the electronic properties of single layer MoS2 can be tuned from the intrinsic electron (n) to hole (p) doping via controlled exposure to atomic hydrogen at room temperature. Moreover, this hydrogenation process represents a viable technique to completely saturate the sulfur vacancies present in the MoS2 flakes. The successful incorporation of hydrogen in MoS2 leads to the modification of the electronic properties as evidenced by high resolution X-ray photoemission spectroscopy and density functional theory calculations. Micro-Raman spectroscopy and angle resolved photoemission spectroscopy measurements show the high quality of the hydrogenated MoS2 confirming the efficiency of our hydrogenation process. These results demonstrate that the MoS2 hydrogenation could be a significant and efficient way to achieve tunable doping of transition metal dichalcogenides (TMD) materials with non-TMD elements.

cond-mat.mtrl-sci↗

arXiv2018

Interface Dipole and Band Bending in Hybrid p-n Heterojunction MoS2/GaN(0001)

Hybrid heterostructures based on bulk GaN and two-dimensional (2D) materials offer novel paths toward nanoelectronic devices with engineered features. Here, we study the electronic properties of a mixed-dimensional heterostructure composed of intrinsic n-doped MoS2 flakes transferred on p-doped GaN(0001) layers. Based on angle-resolved photoemission spectroscopy (ARPES) and high resolution X-ray photoemission spectroscopy (HR-XPS), we investigate the electronic structure modification induced by the interlayer interactions in MoS2/GaN heterostructure. In particular, a shift of the valence band with respect to the Fermi level for MoS2/GaN heterostructure is observed; which is the signature of a charge transfer from the 2D monolayer MoS2 to GaN. ARPES and HR-XPS revealed an interface dipole associated with local charge transfer from the GaN layer to the MoS2 monolayer. Valence and conduction band offsets between MoS2 and GaN are determined to be 0.77 and -0.51 eV, respectively. Based on the measured work functions and band bendings, we establish the formation of an interface dipole between GaN and MoS2 of 0.2 eV.

cond-mat.mtrl-sci↗

arXiv2018

Nanostructures in suspended mono- and bilayer epitaxial graphene

Suspended graphene membrane presents a particular structure with fundamental interests and applications in nanomechanics, thermal transport and optoelectronics. Till now, the commonly used geometries are still quite simple and limited to the microscale. We propose here to overcome this problem by making nanostructures in suspended epitaxial bilayer graphene on a large scale and with a large variety of geometries. We also demonstrate a new hybrid thin film of SiC-graphene with an impressive robustness. Since the mechanics and thermal dissipation of a suspended graphene membrane are strongly related to its own geometry, we have in addition focused on thermal transport and strain engineering experiments. Micro-Raman spectroscopy mapping was successfully performed for various geometries with intrinsic properties measurements at the nanoscale. Our engineering of graphene geometry has permitted to reduce the thermal transport, release and modulate the strain in our structures.

cond-mat.mes-hall↗