SearcharxivSearch

arXiv subjects

Dionisio Doering

Publications and source records attributed to Dionisio Doering.

8 recordsLinked to original sources

HeteroViT: A Versatile Single-Layer Vision Transformer Concept, Co-Designed for Distributed Real-Time Data Reduction on Scientific Detectors

Next-generation X-ray detectors generate data faster than any system can affordably store or process. LCLS-II, the upgraded Linac Coherent Light Source at SLAC, produces data on the order of terabytes per second, with raw-data transfer and storage projected to be prohibitively costly, even though much of the data is not scientifically useful. This concept paper focuses on two major points. The first is versatility: a deliberately tiny, single-layer Vision Transformer (ViT) is enough to serve distinct scientific quick-evaluation tasks. We demonstrate this on two very different problems: (a) a supervised hit/miss/maybe classification on the CSPAD dataset, made to resemble ePixUHR-like detector frames, and (b) a self-supervised latent space for rare-event detection in X-ray diffraction spanning two learning paradigms, two output types, and two detector modalities, with one small backbone. The second is hardware co-design: because the ViT's blocks are structurally uniform, the model maps cleanly onto the heterogeneous hardware already present in the LCLS detector pipeline (ASIC -> FPGA -> GPU) under a simple rule one ASIC is one token so the data is reduced progressively at each stage and a keep/discard decision is produced in real time at the edge. The two claims reinforce each other: versatility is precisely what justifies freezing the front-end in silicon, since a reusable front-end is only worth committing to hardware if it serves many tasks. We are explicit that this is a concept supported by early software analysis, not a hardware demonstration. The natural and primary next phase is the hardware implementation of this distributed pipeline. The decisive evidence still owed an end-to-end latency budget, ASIC feasibility of the in-sensor embedding, and the false-negative behavior that matters for a data veto defines that program. HeteroViT is our first step toward it.

physics.ins-det

Discrete Wavelet Transform for Serial X-ray Crystallography Image Segmentation

Upcoming LCLS-II/II-HE operation at repetition rates approaching 1MHz demands on-detector data reduction to manage the resulting data volumes. We present a 2D discrete wavelet transform (DWT) pre-processing algorithm that segments background scatter from crystal diffraction in serial crystallography images, enabling early data analysis and, when combined with peak finding, lossy compression by transmitting only the identified diffraction peaks. The method zeroes the approximation (LL) coefficients of a multi-level Haar wavelet decomposition and reconstructs from detail subbands only, exploiting the natural separation of smooth background and sharp Bragg peaks in the wavelet domain. Evaluated on 100 simulated nanoBragg frames with known ground truth, the pipeline achieves $F1 \approx 0.96$ at four decomposition levels ($J = 4$), substantially outperforming the established peakfinder8 algorithm ($F1 \approx 0.37$) in both precision ($P \approx 1.00$ vs.\ $0.94$) and recall ($R \approx 0.92$ vs.\ $0.24$). A comparison of 12 wavelet families confirms that Haar is optimal for Bragg-peak detection due to its minimal filter support. Downstream crystallographic analysis performed on real ePix10kA data shows that CC* and $R_\mathrm{split}$ converge at $J = 4$ and track the unprocessed baseline through the practical resolution limit. Under added noise exceeding $\sim$50 ADU, the current pipeline's precision degrades significantly more than that of the pf8 algorithm, exposing a limitation of the proposed strategy. We also demonstrate an FPGA implementation of the DWT filters on an Alveo U200 at 200MHz, with a projected resource footprint compatible with integration into the upcoming ePixUHR firmware and a path to on-detector ASIC implementation in SparkPix detector family.

physics.ins-det

A 28nm Multiply-Accumulate ASIC Architecture for On-Chip Data Compression in MHz Frame Rate X-ray and Electron Pixel Detectors

Modern X-ray detector systems urgently require compact, efficient, and fast data compression schemes to handle the transmission of big data from pixel arrays, enabling frame rates in the MHz regime. In this work, a data compression ASIC that implements a streaming fixed-length lossy compression scheme is introduced and analyzed, proving the feasibility and benefits of on-chip compression. The compression scheme utilizes a vector matrix product logic, which performs a number of floating-point multiplications, additions, and accumulations. The logic is verified, synthesized, and shown to fit in the area resource available for the X-ray detector under study, which comprises 192 x 168 pixels each of 12-bit width, and having a total area of 20 mm x 20 mm, about 2 mm x 20 mm of which are available for the digital logic. Several system architectures, precisions, and compression ratios ranging from 100 to 250 were analyzed to pave the way for on-chip fixed-length compression (e.g., principal component analysis, singular value decomposition) and data reduction (e.g., azimuthal integration) for X-ray and electron detectors.

physics.ins-det

GAMPix: a novel fine-grained, low-noise and ultra-low power pixelated charge readout for TPCs

We report on the development of a novel pixel charge readout system, Grid Activated Multi-scale pixel readout (GAMPix), which is under development for use in the GammaTPC gamma ray instrument concept. GammaTPC is being developed to optimize the use of liquid argon time projection chamber technology for gamma ray astrophysics, for which a fine grained low power charge readout is essential. GAMPix uses a new architecture with coarse and fine scale instrumented electrodes to solve the twin problems of loss of measured charge after diffusion, and high readout power. Fundamentally, it enables low noise and ultra low power charge readout at the spatial scale limited by diffusion in a time projection chamber, and has other possibly applications, including future DUNE modules.

physics.ins-det

Smart sensors using artificial intelligence for on-detector electronics and ASICs

Cutting edge detectors push sensing technology by further improving spatial and temporal resolution, increasing detector area and volume, and generally reducing backgrounds and noise. This has led to a explosion of more and more data being generated in next-generation experiments. Therefore, the need for near-sensor, at the data source, processing with more powerful algorithms is becoming increasingly important to more efficiently capture the right experimental data, reduce downstream system complexity, and enable faster and lower-power feedback loops. In this paper, we discuss the motivations and potential applications for on-detector AI. Furthermore, the unique requirements of particle physics can uniquely drive the development of novel AI hardware and design tools. We describe existing modern work for particle physics in this area. Finally, we outline a number of areas of opportunity where we can advance machine learning techniques, codesign workflows, and future microelectronics technologies which will accelerate design, performance, and implementations for next generation experiments.

physics.ins-det

Characterisation of a CMOS Active Pixel Sensor for use in the TEAM Microscope

A 1M- and a 4M-pixel monolithic CMOS active pixel sensor with 9.5x9.5 micron^2 pixels have been developed for direct imaging in transmission electron microscopy as part of the TEAM project. We present the design and a full characterisation of the detector. Data collected with electron beams at various energies of interest in electron microscopy are used to determine the detector response. Data are compared to predictions of simulation. The line spread function measured with 80 keV and 300 keV electrons is (12.1+/-0.7) micron and (7.4+/-0.6) micron, respectively, in good agreement with our simulation. We measure the detection quantum efficiency to be 0.78+/-0.04 at 80 keV and 0.74+/-0.03 at 300 keV. Using a new imaging technique, based on single electron reconstruction, the line spread function for 80 keV and 300 keV electrons becomes (6.7+/-0.3) micron and (2.4+/-0.2) micron, respectively. The radiation tolerance of the pixels has been tested up to 5 Mrad and the detector is still functional with a decrease of dynamic range by ~30%, corresponding to a reduction in full-well depth from ~39 to ~27 primary 300 keV electrons, due to leakage current increase, but identical line spread function performance.

physics.ins-det

CMOS Pixel Sensor Response to Low Energy Electrons in Transmission Electron Microscopy

This paper presents the results of a study of the response of a test CMOS sensor with a radiation tolerant pixel cell design to 80 keV and 100 keV electrons. The point spread function is measured to be (13.0+/- 1.7) microns at 100 keV and (12.1 +/- 1.6) microns at 80 keV, for 20 micron pixels. Results agree well with values predicted by a Geant-4 and dedicated charge collection simulation.

physics.ins-det

A Rad-hard CMOS Active Pixel Sensor for Electron Microscopy

Monolithic CMOS pixel sensors offer unprecedented opportunities for fast nano-imaging through direct electron detection in transmission electron microscopy. We present the design and a full characterisation of a CMOS pixel test structure able to withstand doses in excess of 1 MRad. Data collected with electron beams at various energies of interest in electron microscopy are compared to predictions of simulation and to 1.5 GeV electron data to disentagle the effect of multiple scattering. The point spread function measured with 300 keV electrons is (8.1 +/- 1.6) micron for 10 micron pixel and (10.9 +/- 2.3) micron for 20 micron pixels, respectively, which agrees well with the values of 8.4 micron and 10.5 micron predicted by our simulation.

physics.ins-det