arXiv subjects

Dodd Gray

Publications and source records attributed to Dodd Gray.

9 recordsLinked to original sources

arXiv2026

An Integrated Ultralow Noise Spiral Interferometric Laser

Photonic integration offers the potential to bring complex high-performance optical systems to the form factor of a compact semiconductor chip. However, the range of system functions accessible critically depends on the extent to which free-space and fiber components can be made integrable. The ultralow-expansion cavity-stabilized laser$-$often used in precision metrology, high-resolution sensors, and advanced systems in atomic physics$-$is one component that currently has no direct parallel on chip. Lasers stabilized to photonically-integrated resonators exist, but exhibit considerably higher frequency noise and are accompanied by large levels of frequency drift. We demonstrate here a new architecture for an ultranarrow linewidth integrated laser based on stabilization to a sinusoidal fringe of an interferometer having a long 25-m unbalanced delay line. Our interferometric laser not only advances the state-of-the-art for on-chip lasers, but we in addition introduce an amplitude locking scheme that greatly suppresses the laser's long-term frequency wander. We achieve a record on-chip fractional frequency noise of $5.6 \times 10^{-14}$, corresponding to a linewidth of 12 Hz centered at 1348 nm. To showcase the utility of this laser, we divide the optical carrier to microwave frequencies, demonstrating the ability to outperform state-of-the-art quartz crystal oscillators by 15 dB or more.

physics.optics↗

arXiv2025

Multi-scale second harmonic generation microscopy of ferroelectric domains in x-cut thin-film lithium niobate

Thin-film lithium niobate (TFLN) is a widely used platform for nonlinear frequency conversion, as its strong nonlinear susceptibility and enhanced modal confinement intensify nonlinear interactions. Frequency doubling from NIR to visible wavelengths necessitates fabrication of quasi-phase matching (QPM) gratings with minimal period variation (<20nm) and control of ferroelectric domain inversion at the micron-scale along centimeter-long waveguides. Second harmonic generation microscopy (SHM) is a powerful tool for optimizing domain engineering (E-field poling), and it enabled the fabrication of near-ideal QPM gratings. Here, we show that increasing the SHM raster scan step size from 200nm to 400nm results in a 4x imaging speedup without sacrificing the accuracy of QPM grating characterization. To that end, Monte Carlo simulation of the coupled rate equations agreed with experimental measurements of second harmonic output power. We also employed a statistical subsampling scheme to characterize 5.6 mm-long waveguides (poling period = 3.240um) in approximately 5 minutes (30 seconds per field x 10 fields per waveguide). Each field is 100 microns in length, so our results indicate that sampling only ~300 periods of a QPM grating is sufficient to accurately predict its second harmonic output. For the device characterized, this corresponds to ~20% of the total grating length. Together, discretization and device-length subsampling speed up SHM imaging by an order of magnitude.

physics.optics↗

arXiv2025

Magic Cancellation Point for Vibration Resilient Ultrastable Microwave Signal

Photonically-synthesized microwave signals have demonstrated the ability to surpass the phase-noise performance achievable by traditional means of RF signal generation. However, in order for microwave-photonic oscillators to truly replace their RF counterparts, this phase noise advantage must also be realizable when operating outside of a laboratory. Oscillators in general are known to be notoriously vibration sensitive, with both traditional RF and optical oscillators degrading sharply in phase noise in all but the most stationary of environments. We demonstrate here a powerful technique that makes use of a precise frequency difference between two optical signals, termed the "magic cancellation point", to enable the cancellation of vibration-induced noise upon optical frequency division to the RF. Beyond simply mitigating the effects of vibration, this technique also preserves the excellent phase noise that would ordinarily be characteristic of signals obtained from a frequency division process. At a center frequency of 10 GHz, our divided down oscillator achieves -42 dBc/Hz, -72 dBc/Hz, -102 dBc/Hz, and -139 dBc/Hz at 1 Hz, 10 Hz, 100 Hz, and 10 kHz offset frequencies, respectively. In addition, from optical to RF, we showcase the cancellation of vibration-induced phase noise by 22.6 dB, reaching an acceleration sensitivity of $1.5 \times 10^{-10}$ g$^{-1}$. This technique applies widely to optical carriers of any center wavelength and derived from an arbitrary resonator geometry.

physics.optics↗

arXiv2024

Inverse Design for Waveguide Dispersion with a Differentiable Mode Solver

Inverse design of optical components based on adjoint sensitivity analysis has the potential to address the most challenging photonic engineering problems. However existing inverse design tools based on finite-difference-time-domain (FDTD) models are poorly suited for optimizing waveguide modes for adiabatic transformation or perturbative coupling, which lies at the heart of many important photonic devices. Among these, dispersion engineering of optical waveguides is especially challenging in ultrafast and nonlinear optical applications involving broad optical bandwidths and frequency-dependent anisotropic dielectric material response. In this work we develop gradient back-propagation through a general purpose electromagnetic eigenmode solver and use it to demonstrate waveguide dispersion optimization for second harmonic generation with maximized phase-matching bandwidth. This optimization of three design parameters converges in eight steps, reducing the computational cost of optimization by ~100x compared to exhaustive search and identifies new designs for broadband optical frequency doubling of laser sources in the 1.3-1.4 micron wavelength range.Furthermore we demonstrate that the computational cost of gradient back-propagation is independent of the number of parameters, as required for optimization of complex geometries. This technique enables practical inverse design for a broad range of previously intractable photonic devices.

physics.optics↗

arXiv2024

Optical Atomic Clock Interrogation Via an Integrated Spiral Cavity Laser

Optical atomic clocks have demonstrated revolutionary advances in precision timekeeping, but their applicability to the real world is critically dependent on whether such clocks can operate outside a laboratory setting. The challenge to clock portability stems from the many obstacles not only in miniaturizing the underlying components of the clock $-$ namely the ultrastable laser, the frequency comb, and the atomic reference itself $-$ but also in making the clock resilient to environmental fluctuations. Photonic integration offers one compelling solution to simultaneously address the problems of miniaturization and ruggedization, but brings with it a new set of challenges in recreating the functionality of an optical clock using chip-scale building blocks. The clock laser used for atom interrogation is one particular point of uncertainty, as the performance of the meticulously-engineered bulk-cavity stabilized lasers would be exceptionally difficult to transfer to chip. Here we demonstrate that a chip-integrated ultrahigh quality factor (Q) spiral cavity, when interfaced with a 1348 nm seed laser, reaches a fractional frequency instability of $7.5 \times 10^{-14}$, meeting the stability requirements for interrogating the narrow-linewidth transition of $^{88}$Sr$^+$ upon frequency doubling to 674 nm. In addition to achieving the record for laser stability on chip, we use this laser to showcase the operation of a Sr-ion clock with short-term instability averaging down as $3.9 \times 10^{-14} / \sqrt{\tau}$, where $\tau$ is the averaging time. Our demonstration of an optical atomic clock interrogated by an integrated spiral cavity laser opens the door for future advanced clock systems to be entirely constructed using lightweight, portable, and mass-manufacturable integrated optics and electronics.

physics.atom-ph↗

arXiv2023

Ultralow Noise Microwave Synthesis Via Difference Frequency Division of a Brillouin Resonator

Low phase noise microwave oscillators are at the center of a multitude of applications that span the gamut of photonics and electronics. Within this space, optically-derived approaches to microwave frequency synthesis are particularly compelling owing to their unique combination of ultrawideband frequency access and the potential for resiliency to temperature and environmental perturbation via common-mode noise rejection. We demonstrate here an optical frequency divider that uses the 30 terahertz frequency gap between two stimulated Brillouin scattering (SBS) lasers as the basis for frequency division. The resulting microwave signal, centered at 10 GHz frequency, exhibits exceptionally low phase noise levels of -95 dBc/Hz and -110 dBc/Hz at 10 Hz and 100 Hz frequency offset, respectively. Moreover, the two SBS lasers, generated from a common fiber resonator, exhibits a high degree of correlated noise cancellation in their frequency difference. We measure 16.1 dB of noise rejection against intentionally applied vibrations, thus showcasing a promising pathway towards portable and robust ultralow noise photonic-microwave synthesis.

physics.optics↗

arXiv2020

Thermo-Optic Multi-Stability and Relaxation in Silicon Microring Resonators with Lateral Diodes

We demonstrate voltage-tunable thermo-optic bi- and tri-stability in silicon photonic microring resonators with lateral p-i-n junctions and present a technique for characterizing the thermo-optic transient response of integrated optical resonators. Our method for thermo-optic transient response measurement is applicable to any integrated photonics platform and uses standard equipment. Thermo-optic relaxation in encapsulated waveguides is found to be approximately logarithmic in time, consistent with the analytic solution for 2D heat diffusion. We develop a model for thermo-optic microring multi-stability and dynamics which agrees with experiment data over a wide range of operating conditions. Our work highlights the fundamental connection in semiconductor waveguides between active free-carrier removal and thermo-optic heating, a result of particular relevance to Kerr soliton state stability and on-chip frequency comb generation. The devices studied here were fabricated in a CMOS foundry process and as a result our model is useful for design of silicon photonic waveguide devices.

physics.optics↗

arXiv2018

Laser Annealing for Radiatively Broadened MoSe2 grown by Chemical Vapor Deposition

We report on a laser annealing procedure which greatly improves the quality of suspended monolayers of chemical vapor deposition (CVD) grown MoSe2. Annealing with a green laser locally heats the suspended flake to approximately 600 K, which both removes contaminants and reduces strain gradients. At 4 K, we observe linewidths as narrow as 3.5 meV (1.6nm) full-width at half-max (FWHM) for both photoluminescence (PL) and reflection. Large peak reflectances up to 47% are also observed. These values are comparable to those of the highest quality hexagonal boron nitride (hBN) encapsulated samples. We demonstrate that this laser annealing process can yield highly spatially homogeneous samples, with the length scale of the homogeneity limited primarily by the size of the suspended area. Annealed regions are very stable, exhibiting negligible deterioration over 24 hours at cryogenic temperatures. The annealing method is also very repeatable, with substantial improvements of sample quality on every spot (> 40) tested.

cond-mat.mtrl-sci↗

arXiv2018

Conditions for Parametric and Free-Carrier Oscillation in Silicon Ring Cavities

We model optical parametric oscillation in ring cavities with two-photon absorption, focusing on silicon at 1.55$\mu$m. Oscillation is possible if free-carrier absorption can be mitigated; this can be achieved using carrier sweep-out in a reverse-biased p-i-n junction to reduce the carrier lifetime. By varying the pump power, detuning, and reverse-bias voltage, it is possible to generate frequency combs in cavities with both normal and anomalous dispersion at a wide range of wavelengths including 1.55$\mu$m. Furthermore, a free-carrier self-pulsing instability leads to rich dynamics when the carrier lifetime is sufficiently long.

physics.optics↗