arXiv subjects

E. Fioravanti

Publications and source records attributed to E. Fioravanti.

At least 55 records · Page 3Linked to original sources

arXiv2018

Observation of $ψ(3686) \to η' e^+ e^- $

Using a data sample of $448.1 \times 10^6$ $ψ(3686)$ events collected with the BESIII detector at the BEPCII collider, we report the first observation of the electromagnetic Dalitz decay $ψ(3686) \to η' e^+ e^-$, with significances of 7.0$σ$ and 6.3$σ$ when reconstructing the $η'$ meson via its decay modes $η'\toγπ^+ π^-$ and $η'\toπ^+π^-η$ ($η\to γγ$), respectively. The weighted average branching fraction is determined to be $\mathcal{B}(ψ(3686) \to η' e^+ e^-)= (1.90 \pm 0.25 \pm 0.11) \times 10^{-6}$, where the first uncertainty is statistical and the second systematic.

hep-ex↗

arXiv2018

Observation of $ψ(3686) \to n\bar{n}$ and improved measurement of $ψ(3686) \to p \bar{p}$

We observe the decay $ψ(3686) \to n \bar{n}$ for the first time and measure $ψ(3686) \to p \bar{p}$ with improved accuracy by using $1.07\times 10^8$ $ψ(3686)$ events collected with the BESIII detector. The measured branching fractions are $\mathcal{B}(ψ(3686) \to n \bar{n}) = (3.06 \pm 0.06 \pm 0.14)\times 10^{-4}$ and $\mathcal{B}(ψ(3686) \to p \bar{p}) = (3.05 \pm 0.02 \pm 0.12) \times 10^{-4}$. Here, the first uncertainties are statistical and the second ones systematic. With the hypothesis that the polar angular distributions of the neutron and proton in the center-of-mass system obey $1+α\cos^2θ$, we determine the $α$ parameters to be $α_{n\bar{n}} = 0.68 \pm 0.12 \pm 0.11$ and $α_{p\bar{p}} = 1.03 \pm 0.06 \pm 0.03$ for $ψ(3686)\to n\bar{n}$ and $ψ(3686)\to p\bar{p}$, respectively.

hep-ex↗

arXiv2018

A Cylindrical GEM Inner Tracker for the BESIII experiment at IHEP

The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector that collects data provided by the collision in the Beijing Electron Positron Collider II (BEPCII), hosted at the Institute of High Energy Physics of Beijing. Since the beginning of its operation, BESIII has collected the world largest sample of J/ψ and ψ(2s). Due to the increase of the luminosity up to its nominal value of 10^33 cm-2 s-1 and aging effect, the MDC decreases its efficiency in the first layers up to 35% with respect to the value in 2014. Since BESIII has to take data up to 2022 with the chance to continue up to 2027, the Italian collaboration proposed to replace the inner part of the MDC with three independent layers of Cylindrical triple-GEM (CGEM). The CGEM-IT project will deploy several new features and innovation with respect the other current GEM based detector: the μTPC and analog readout, with time and charge measurements will allow to reach the 130 μm spatial resolution in 1 T magnetic field requested by the BESIII collaboration. In this proceeding, an update of the status of the project will be presented, with a particular focus on the results with planar and cylindrical prototypes with test beams data. These results are beyond the state of the art for GEM technology in magnetic field.

physics.ins-det↗

arXiv2018

Search for invisible decays of $ω$ and $ϕ$ with $J/ψ$ data at BESIII

Using a data sample of $(1310.6 \pm 7.0)\times 10^6$ $J/ψ$ events collected with the BESIII detector operating at the BEPCII collider, we perform the first experimental search for invisible decays of a light vector meson ($V=ω,ϕ$) via $J/ψ\to V η$ decays. The decay of $η\to π^+π^-π^0$ is utilized to tag the $V$ meson decaying into the invisible final state. No evidence for a significant invisible signal is observed, and the upper limits on the ratio of branching fractions at the 90\% confidence level are determined to be $\frac{\mathcal{B}(ω\rightarrow \rm{invisible})}{\mathcal{B}(ω\to π^+π^-π^0)} < 8.1 \times 10^{-5}$ and $\frac{\mathcal{B}(ϕ\to \rm{invisible})}{\mathcal{B}(ϕ\to K^+K^-)} < 3.4\times 10^{-4}$. By using the world average values of $\mathcal{B}(ω\to π^+π^-π^0)$ and $\mathcal{B}(ϕ\to K^+K^-)$, the upper limits on the decay branching fractions at the $90\%$ confidence level are set as $\mathcal{B}(ω\to \rm{invisible})< 7.3 \times 10^{-5}$ and $\mathcal{B}(ϕ\to \rm{invisible})< 1.7\times 10^{-4}$, respectively.

hep-ex↗

arXiv2018

Measurement of e+e- --> D Dbar Cross Sections at the psi(3770) Resonance

We report new measurements of the cross sections for the production of D Dbar final states at the psi(3770) resonance. Our data sample consists of an integrated luminosity of 2.93/fb of e+e- annihilation data produced by the BEPCII collider and collected and analyzed with the BESIII detector. We exclusively reconstruct three D0 and six D+ hadronic decay modes and use the ratio of the yield of fully reconstructed D Dbar events ("double tags") to the yield of all reconstructed D or Dbar mesons ("single tags") to determine the number of D0 D0bar and D+D- events, benefiting from the cancellation of many systematic uncertainties. Combining these yields with an independent determination of the integrated luminosity of the data sample, we find the cross sections to be σ(e+e- --> D0 D0bar)=(3.615 +- 0.010 +- 0.038) nb and σ(e+e- --> D+D-)=(2.830 +- 0.011 +- 0.026) nb, where the uncertainties are statistical and systematic, respectively.

hep-ex↗

arXiv2018

Observation of $a^{0}_{0}(980)$-$f_{0}(980)$ Mixing

We report the first observation of $a^{0}_{0}(980)$-$f_{0}(980)$ mixing in the decays of $J/ψ\toϕf_{0}(980)\toϕa^{0}_{0}(980)\toϕηπ^{0}$ and $χ_{c1}\to a^{0}_{0}(980)π^{0}\to f_{0}(980)π^{0}\toπ^{+}π^{-}π^{0}$, using data samples of $1.31\times10^{9}$ $J/ψ$ events and $4.48\times10^{8}$ $ψ(3686)$ events accumulated with the BESIII detector. The signals of $f_{0}(980)\to a^{0}_{0}(980)$ and $a^{0}_{0}(980)\to f_{0}(980)$ mixing are observed at levels of statistical significance of $7.4σ$ and $5.5σ$, respectively. The corresponding branching fractions and mixing intensities are measured and the constraint regions on the coupling constants, $g_{a_{0}K^{+}K^{-}}$ and $g_{f_{0}K^{+}K^{-}}$, are estimated. The results improve the understanding of the nature of $a^{0}_{0}(980)$ and $f_{0}(980)$.

hep-ex↗

arXiv2018

Precision Study of $η^\prime\rightarrowγπ^+π^-$ Decay Dynamics

Using a low background data sample of $9.7\times10^{5}$ $Jψ\rightarrowγη^\prime$, $η^\prime\rightarrowγπ^+π^-$ events, which are 2 orders of magnitude larger than those from the previous experiments, recorded with the BESIII detector at BEPCII, the decay dynamics of $η^\prime\rightarrowγπ^+π^-$ are studied with both model-dependent and model-independent approaches. The contributions of $ω$ and the $ρ(770)-ω$ interference are observed for the first time in the decays $η^\prime\rightarrowγπ^+π^-$ in both approaches. Additionally, a contribution from the box anomaly or the $ρ(1450)$ resonance is required in the model-dependent approach, while the process specific part of the decay amplitude is determined in the model-independent approach.

hep-ex↗

arXiv2018

Measurements of Absolute Branching Fractions for $Λ^+_c\toΞ^0K^+$ and $Ξ(1530)^0K^+$

We report the first measurements of absolute branching fractions for the $W$-exchange-only processes $Λ^+_c\toΞ^0K^+$ and $Λ^+_c\toΞ(1530)^0K^+$ with the double-tag technique, by analyzing an $e^{+}e^{-}$ collision data sample, that corresponds to an integrated luminosity of 567 pb$^{-1}$ collected at a center-of-mass energy of 4.6 GeV by the BESIII detector. The branching fractions are measured to be $\mathcal{B}(Λ^+_c\toΞ^0K^+)=(5.90\pm0.86\pm0.39)\times10^{-3}$ and $\mathcal{B}(Λ^+_c\toΞ(1530)^0K^+)=(5.02\pm0.99\pm0.31)\times10^{-3}$, where the first uncertainties are statistical and the second systematic. Our results are more precise than the previous relative measurements.

hep-ex↗

arXiv2018

Measurement of the absolute branching fraction of the inclusive semileptonic $Λ_c^+$ decay

Using a data sample corresponding to an integrated luminosity of 567 pb$^{-1}$ collected at a center-of-mass energy of $\sqrt{s}=4.6$ GeV with the BESIII detector, we measure the absolute branching fraction of the inclusive semileptonic $Λ_c^+$ decay with a double-tag method. We obtain $\mathcal{B}(Λ_c^+ \rightarrow X e^+ ν_e) = (3.95\pm0.34\pm0.09)\%$, where the first uncertainty is statistical and the second systematic. Using the known $Λ_c^+$ lifetime and the charge-averaged semileptonic decay width of nonstrange charmed measons ($D^0$ and $D^+$), we obtain the ratio of the inclusive semileptonic decay widths $Γ(Λ_c^+ \rightarrow X e^+ ν_e)/\barΓ(D\rightarrow X e^+ ν_e)= 1.26\pm0.12$.

hep-ex↗

arXiv2018

Measurement of the Integrated Luminosities of Cross-section Scan Data Samples Around the $ψ(3770)$ Mass Region

To investigate the nature of the $ψ(3770)$ resonance and to measure the cross section for $e^+e^- \to D\bar{D}$, a cross-section scan data sample, distributed among 41 center-of-mass energy points from 3.73 to 3.89~GeV, was taken with the BESIII detector operated at the BEPCII collider in the year 2010. By analyzing the large angle Bhabha scattering events, we measure the integrated luminosity of the data sample at each center-of-mass energy point. The total integrated luminosity of the data sample is $76.16\pm0.04\pm0.61$~pb$^{-1}$, where the first uncertainty is statistical and the second systematic.

hep-ex↗

arXiv2018

Search for the rare decays $D\to h(h')e^+e^-$

We search for rare decays of $D$ mesons to hadrons accompany with an electron-positron pair (h(h')$e^+e^-$), using an $e^+e^-$ collision sample corresponding to an integrated luminosity of 2.93 fb$^{-1}$ collected with the BESIII detector at $\sqrt{s}$ = 3.773 GeV. No significant signals are observed, and the corresponding upper limits on the branching fractions at the $90\%$ confidence level are determined. The sensitivities of the results are at the level of $10^{-5} \sim 10^{-6}$, providing a large improvement over previous searches.

hep-ex↗

arXiv2018

Measurement of Singly Cabibbo-Suppressed Decays $D^{0}\toπ^{0}π^{0}π^{0}$, $π^{0}π^{0}η$, $π^{0}ηη$ and $ηηη$

Using a data sample of $e^+e^-$ collision data corresponding to an integrated luminosity of 2.93 $fb^{-1}$ collected with the BESIII detector at a center-of-mass energy of $\sqrt{s}= 3.773~GeV$,we search for the singly Cabibbo-suppressed decays $D^{0}\toπ^{0}π^{0}π^{0}$, $π^{0}π^{0}η$, $π^{0}ηη$ and $ηηη$ using the double tag method. The absolute branching fractions are measured to be $\mathcal{B}(D^{0}\toπ^{0}π^{0}π^{0}) = (2.0 \pm 0.4 \pm 0.3)\times 10^{-4}$, $\mathcal{B}(D^{0}\toπ^{0}π^{0}η) = (3.8 \pm 1.1 \pm 0.7)\times 10^{-4}$ and $\mathcal{B}(D^{0}\toπ^{0}ηη) = (7.3 \pm 1.6 \pm 1.5)\times 10^{-4}$ with the statistical significances of $4.8σ$, $3.8σ$ and $5.5σ$, respectively, where the first uncertainties are statistical and the second ones systematic. No significant signal of $D^{0}\toηηη$ is found, and the upper limit on its decay branching fraction is set to be $\mathcal{B}(D^{0}\toηηη) < 1.3 \times 10^{-4}$ at the $90\%$ confidence level.

hep-ex↗

arXiv2018

Precision measurement of the $e^{+}e^{-}~\rightarrow~Λ_{c}^{+} \barΛ_{c}^{-}$ cross section near threshold

The Born cross section of the $e^{+}e^{-}~\rightarrow~Λ_{c}^{+} \barΛ_{c}^{-}$ process is measured with unprecedented precision using data collected with the BESIII detector at $\sqrt{s}=4574.5$, $45580.0$, $4590.0$ and $4599.5$ $\mathrm{MeV}$. The non-zero cross section near the $Λ_{c}^{+} \barΛ_{c}^{-}$ production threshold is discerned. At center-of-mass energies $\sqrt{s}=4574.5$ and $4599.5 $ $\mathrm{MeV}$, the higher statistics data enable us to measure the $Λ_{c}$ polar angle distributions. From these, the ratio between the $Λ_{c}$ electric and magnetic form factors ($|G_{E}/G_{M}|$) is measured for the first time. They are found to be $1.14\pm0.14\pm0.07$ and $1.23\pm0.05\pm0.03$ respectively, where the first uncertainties are statistical and the second are systematic.

hep-ex↗

arXiv2018

Innovative design and construction technique for the Cylindrical GEM detector for the BESIII experiment

Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the particles and to exploit the its properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allow to create very large area GEM foils (up to 50x100 cm2) and thanks to the small thickness of these foil is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by permaglass rings glued at the edges. These rings are use to assembly the CGEM together with a dedicated Vertical Insertion System and moreover there is placed the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this presentation will be presented an overview of the construction technique and the validation of this technique through the realization of a CGEM and its first tests. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.

physics.ins-det↗

arXiv2018

Performance of the micro-TPC Reconstruction for GEM Detectors at High Rate

Gas detectors are one of the pillars of the research in fundamental physics. Since many years, a new concept of detectors, the Micro Pattern Gas Detectors, allows to overcome many of the problems of other types of commonly used detectors, as drift chambers and microstrips, reducing the discharge rate and increasing the radiation tolerance. Among these, one of the most commonly used is the Gas Electron Multiplier. Commonly deployed as fast timing detectors and triggers, due to their fast response, high rate capability and high radiation hardness, they can also be used as trackers. The center of gravity readout technique allows to overcome the limit of the digital pads, whose spatial resolution is constrained by the pitch size. The presence of a high external magnetic field can distort the electronic cloud and affect the spatial resolution. The micro-TPC reconstruction method allows to reconstruct the three dimensional particle position as in a traditional Time Projection Chamber, but within a drift gap of a few millimeters. This method brings these detectors into a new perspective for what concerns the spatial resolution in strong magnetic field. In this report, the basis of this new technique will be shown and it will be compared to the traditional center of gravity. The results of a series of test beam performed with 10 x 10 cm2 planar prototypes in magnetic field will also be presented. This is one of the first implementations of this technique for GEM detectors in magnetic field and allows to reach unprecedented performance for gas detectors, up to a limit of 120 micron at 1T, one of the world's best results for MPGDs in strong magnetic field. The micro-TPC reconstruction has been recently tested at very high rates in a test beam at the MAMI facility; preliminary results of the test will be presented.

physics.ins-det↗

arXiv2018

Test beam results of a Cylindrical GEM detector for the BESIII experiment

Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the charged particles and to exploit their properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allows to create very large area GEM foils (up to 50x100 $\mathrm{cm}^2$) and thanks to the small thickness of these foils is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by Permaglass rings glued at the edges. These rings are used to assembly the CGEM, together with a dedicated Vertical Insertion System and moreover they host the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this contribution an overview of the construction technique, the validation of this technique through the realization of a CGEM, and its first tests will be presented. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.

physics.ins-det↗

arXiv2018

The new cylindrical GEM inner tracker of BESIII

The Cylindrical GEM-Inner Tracker (CGEM-IT) is the upgrade of the internal tracking system of the BESIII experiment. It consists of three layers of cylindrically-shaped triple GEMs, with important innovations with respect to the existing GEM detectors, in order to achieve the best performance with the lowest material budget. It will be the first cylindrical GEM running with analog readout inside a 1T magnetic field. The simultaneous measurement of both the deposited charge and the signal time will permit to use a combination of two algorithms to evaluate the spatial position of the charged tracks inside the CGEM-IT: the charge centroid and the micro time projection chamber modes. They are complementary and can cope with the asymmetry of the electron avalanche when running in magnetic field and with non-orthogonal incident tracks. To evaluate the behavior under different working settings, both planar chambers and the first cylindrical prototype have been tested during various test beams at CERN with 150 GeV/c muons and pions. This paper reports the results obtained with the two reconstruction methods and a comparison between the planar and cylindrical chambers.

physics.ins-det↗

arXiv2018

Test beam results with prototypes for the new Cylindrical GEM Inner Tracker of the BESIII experiment

A cylindrical GEM tracker is under construction in order to replace and improve the inner tracking system of the BESIII experiment. Tests with planar chamber prototypes were carried out on the H4 beam line of SPS (CERN) with muons of 150 GeV/c momentum, to evaluate the efficiency and resolution under different working conditions. The obtained efficiency was in the 96 - 98% range. Two complementary algorithms for the position determination were developed: the charge centroid and the micro-TPC methods. With the former, resolutions <100 micron and <200 micron were achieved without and with magnetic field, respectively. The micro-TPC improved these results. By the end of 2016, the first cylindrical prototype was tested on the same beam line. It showed optimal stability under different settings. The comparison of its performance with respect to the planar chambers is ongoing. Here, the results of the planar prototype tests will be addressed.

physics.ins-det↗