arXiv subjects

E. Liu

Publications and source records attributed to E. Liu.

7 recordsLinked to original sources

arXiv2025

Excitation Spectra of the ${}^{12}{\rm C}(p,d)$ Reaction near the $\eta'$-Meson Emission Threshold Measured in Coincidence with High-Momentum Protons

The missing mass of the ${}^{12}{\rm C}(p,d)$ reaction has been measured near the $\eta'$-meson emission threshold in coincidence with a high-momentum proton to selectively collect $\eta'$-${}^{11}{\rm C}$ mesic nucleus formation events at GSI, Germany. A 2.5 GeV proton excites a carbon nucleus to form an $\eta'$-mesic nucleus emitting a deuteron forward with an energy of $\sim 1.6$ GeV. The deuteron is momentum-analyzed by the Fragment Separator used as a high-resolution spectrometer to deduce the excitation energy of the residual system. The large-acceptance detector WASA surrounding the target identifies high-momentum protons emitted in the decay of the $\eta'$-mesic nucleus. The measured semi-exclusive spectrum exhibits structures below the threshold though the statistical significance is limited. The spectrum is fitted by theoretically calculated spectra varying optical-potential parameters of the $\eta'$-nucleus interaction. The analysis results indicate $\eta'$-mesic nuclei formation for the real potential depth of $\sim -61$ MeV with a local statistical significance of $3.5 \sigma$ and, taking into account the look-elsewhere effect, a global significance of $2.1 \sigma$.

nucl-ex↗

arXiv2025

Performance of newly constructed plastic scintillator barrel in the WASA-FRS experiments and evaluation of radiation damage effects on multi-pixel photon counter

A barrel-shaped plastic scintillation counter with Multi-Pixel Photon Counter (MPPC) readout has been developed and operated in the first WASA-FRS experimental campaign at GSI. The detector was used to measure charged particles emitted from reactions induced by a 2.5 GeV proton beam incident on a carbon target, providing particle identification in combination with momentum reconstruction in a 1 T magnetic field. The performance of this detector, particularly its response to energy deposition and time resolution, was systematically investigated as a function of count rate and total number of irradiating protons. A time resolution of 45-75 ps ($\sigma$), depending on the energy deposition, was achieved. Stable performance was maintained under high-rate conditions up to 1.35 MHz per single counter, with no significant degradation in either signal amplitude or timing response. Radiation-induced damage to the MPPCs was observed primarily as a reduction in signal amplitude, with approximately $35\%$ decrease at an estimated 1 MeV neutron-equivalent fluence of $2.4 \times 10^{10}$ cm$^{-2}$.

physics.ins-det↗

arXiv2024

Measurements of proton hardness factors in silicon at energies between 10 MeV and 25 MeV

Silicon detector technologies are often employed for high energy particle physics applications due to their excellent radiation hardness. Radiation damage in the form of bulk or substrate damage is dependent on the incident particle species and energy. The fluence is therefore often quoted as the 1 MeV neutron equivalent fluence, with hardness factors being the scaling quantity. The hardness factor can be determined by analysing the change in the leakage current of silicon pad diodes post-irradiation. Using the MC40 cyclotron facility at the University of Birmingham, n-in-p FZ silicon pad diodes were irradiated to several fluence points at three different proton beam energies. The hardness factors acquired were 3.07 $\pm$ 0.37 for 10.5 MeV protons, 2.73 $\pm$ 0.27 for 16.4 MeV protons and 2.19 $\pm$ 0.22 for 24.3 MeV protons. The value for 16.4 MeV protons agrees with the theoretical predictions, whereas the values for 10.5 MeV and 24.3 MeV are lower than predicted by the same calculations.

physics.ins-det↗

arXiv2023

Hypernuclear event detection in the nuclear emulsion with Monte Carlo simulation and machine learning

This study developed a novel method for detecting hypernuclear events recorded in nuclear emulsion sheets using machine learning techniques. The artificial neural network-based object detection model was trained on surrogate images created through Monte Carlo simulations and image-style transformations using generative adversarial networks. The performance of the proposed model was evaluated using $\alpha$-decay events obtained from the J-PARC E07 emulsion data. The model achieved approximately twice the detection efficiency of conventional image processing and reduced the time spent on manual visual inspection by approximately 1/17. The established method was successfully applied to the detection of hypernuclear events. This approach is a state-of-the-art tool for discovering rare events recorded in nuclear emulsion sheets without any real data for training.

nucl-ex↗

arXiv2018

SOT-MRAM 300mm integration for low power and ultrafast embedded memories

We demonstrate for the first time full-scale integration of top-pinned perpendicular MTJ on 300 mm wafer using CMOS-compatible processes for spin-orbit torque (SOT)-MRAM architectures. We show that 62 nm devices with a W-based SOT underlayer have very large endurance (> 5x10^10), sub-ns switching time of 210 ps, and operate with power as low as 300 pJ.

cond-mat.mes-hall↗

arXiv2017

Annealing stability of magnetic tunnel junctions based on dual MgO free layers and [Co/Ni] based thin synthetic antiferromagnet fixed system

We study the annealing stability of bottom-pinned perpendicularly magnetized magnetic tunnel junctions based on dual MgO free layers and thin fixed systems comprising a hard [Co/Ni] multilayer antiferromagnetically coupled to thin a Co reference layer and a FeCoB polarizing layer. Using conventional magnetometry and advanced broadband ferromagnetic resonance, we identify the properties of each sub-unit of the magnetic tunnel junction and demonstrate that this material option can ensure a satisfactory resilience to the 400$^\circ$C thermal annealing needed in solid-state magnetic memory applications. The dual MgO free layer possesses an anneal-robust 0.4 T effective anisotropy and suffers only a minor increase of its Gilbert damping from 0.007 to 0.010 for the toughest annealing conditions. Within the fixed system, the ferro-coupler and texture-breaking TaFeCoB layer keeps an interlayer exchange above 0.8 mJ/m$^2$, while the Ru antiferrocoupler layer within the synthetic antiferromagnet maintains a coupling above -0.5 mJ/m$^2$. These two strong couplings maintain the overall functionality of the tunnel junction upon the toughest annealing despite the gradual degradation of the thin Co layer anisotropy that may reduce the operation margin in spin torque memory applications. Based on these findings, we propose further optimization routes for the next generation magnetic tunnel junctions.

cond-mat.mtrl-sci↗

arXiv2016

Ferromagnetic resonance study of composite Co/Ni - FeCoB free layers with perpendicular anisotropy

We study the properties of composite free layers with perpendicular anisotropy. The free layers are made of a soft FeCoB layer ferromagnetically coupled by a variable spacer (Ta, W, Mo) to a very anisotropic [Co/Ni] multilayer embodied in a magnetic tunnel junction meant for spin torque memory applications. For this we use broadband ferromagnetic resonance to follow the field dependence of the acoustical and optical excitation of the composite free layer in both in-plane and out-of-plane applied fields. The modeling provides the interlayer exchange coupling, the anisotropies and the damping factors. The popular Ta spacer are outperformed by W and even more by Mo, which combines the strongest interlayer exchange coupling without sacrificing anisotropies, damping factors and transport properties.

cond-mat.mtrl-sci↗