SearcharxivSearch

arXiv subjects

E. Tatulli

Publications and source records attributed to E. Tatulli.

At least 19 recordsLinked to original sources

Laser Tomography Adaptive Optics (LTAO): A performance study

We present an analytical derivation of the on-axis performance of Adaptive Optics systems using a given number of guide stars of arbitrary altitude, distributed at arbitrary angular positions in the sky. The expressions of the residual error are given for cases of both continuous and discrete turbulent atmospheric profiles. Assuming Shack-Hartmann wavefront sensing with circular apertures, we demonstrate that the error is formally described by integrals of products of three Bessel functions. We compare the performance of Adaptive Optics correction when using natural, Sodium or Rayleigh laser guide stars. For small diameter class telescopes (~5m), we show that a few number of Rayleigh beacons can provide similar performance to that of a single Sodium laser, for a lower overall cost of the instrument. For bigger apertures, using Rayleigh stars may not be such a suitable alternative because of the too severe cone effect that drastically degrades the quality of the correction.

astro-ph.IM

PIONIER: a status report

The visitor instrument PIONIER provides VLTI with improved imaging capabilities and sensitivity. The instrument started routinely delivering scientific data in November 2010, that is less than 12 months after being approved by the ESO Science and Technical Committee. We recall the challenges that had to be tackled to design, built and commission PIONIER. We summarize the typical performances and some astrophysical results obtained so far. We conclude this paper by summarizing lessons learned.

astro-ph.IM

PIONIER: a 4-telescope visitor instrument at VLTI

PIONIER stands for Precision Integrated-Optics Near-infrared Imaging ExpeRiment. It combines four 1.8m Auxilliary Telescopes or four 8m Unit Telescopes of the Very Large Telescope Interferometer (ESO, Chile) using an integrated optics combiner. The instrument has been integrated at IPAG starting in December 2009 and commissioned at the Paranal Observatory in October 2010. It provides scientific observations since November 2010. In this paper, we detail the instrumental concept, we describe the standard operational modes and the data reduction strategy. We present the typical performance and discuss how to improve them. This paper is based on laboratory data obtained during the integrations at IPAG, as well as on-sky data gathered during the commissioning at VLTI. We illustrate the imaging capability of PIONIER on the binaries deltaSco and HIP11231. PIONIER provides 6 visibilities and 3 independent closure phases in the H band, either in a broadband mode or with a low spectral dispersion (R=40), using natural light (i.e. unpolarized). The limiting magnitude is Hmag=7 in dispersed mode under median atmospheric conditions (seeing<1", tau0>3ms) with the 1.8m Auxiliary Telescopes. We demonstrate a precision of 0.5deg on the closure phases. The precision on the calibrated visibilities ranges from 3 to 15% depending on the atmospheric conditions. PIONIER has been installed and successfully tested as a visitor instrument for the VLTI. It permits high angular resolution imaging studies at an unprecedented level of sensitivity. The successful combination of the four 8m Unit Telescopes in March 2011 demonstrates that VLTI is ready for 4-telescope operation.

astro-ph.IM

Detection of CH+ emission from the disc around HD100546

Despite its importance in the thermal-balance of the gas and in the determination of primeval planetary atmospheres, the chemistry in protoplanetary discs remains poorly constrained with only a handful of detected species. We observed the emission from disc around the Herbig Be star HD 100546 with the PACS instrument in the spectroscopic mode on board the Herschel Space Telescope as part of the Gas in Protoplanetary Systems (GASPS) programme and used archival data from the DIGIT programme to search for the rotational emission of CH+. We detected in both datasets an emission line centred at 72.16 micron that most likely corresponds to the J=5-4 rotational emission of CH+. The J=3-2 and 6-5 transitions are also detected albeit with lower confidence. Other CH+ rotational lines in the PACS observations are blended with water lines. A rotational diagram analysis shows that the CH+ gas is warm at 323 (+2320/-151) K with a mass of 3e-14-5e-12 M_Sun. We modelled the CH+ chemistry with the chemo-physical code ProDiMo using a disc density structure and grain parameters that match continuum observations and near- and mid-infrared interferometric data. The model suggests that CH+ is most abundant at the location of the disc rim at 10-13 AU from the star where the gas is warm, consistent with previous observations of hot CO gas emission.

astro-ph.GA

Constraining the structure of the planet-forming region in the disk of the Herbig Be star HD 100546

Studying the physical conditions in circumstellar disks is a crucial step toward understanding planet formation. Of particular interest is the case of HD 100546, a Herbig Be star that presents a gap within the first 13 AU of its protoplanetary disk, that may originate in the dynamical interactions of a forming planet. We gathered a large amount of new interferometric data using the AMBER/VLTI instrument in the H- and K-bands to spatially resolve the warm inner disk and constrain its structure. Then, combining these measurements with photometric observations, we analyze the circumstellar environment of HD 100546 in the light of a passive disk model based on 3D Monte-Carlo radiative transfer. Finally, we use hydrodynamical simulations of gap formation by planets to predict the radial surface density profile of the disk and test the hypothesis of ongoing planet formation. The SED and the NIR interferometric data are adequately reproduced by our model. We show that the H- and K-band emissions are coming mostly from the inner edge of the internal dust disk, located near 0.24 AU from the star, i.e., at the dust sublimation radius in our model. We directly measure an inclination of $33^{\circ} \pm 11^{\circ}$ and a position angle of $140^{\circ} \pm 16^{\circ}$ for the inner disk. This is similar to the values found for the outer disk ($i \simeq 42^{\circ}$, $PA \simeq 145^{\circ}$), suggesting that both disks may be coplanar. We finally show that 1 to 8 Jupiter mass planets located at $\sim 8$ AU from the star would have enough time to create the gap and the required surface density jump of three orders of magnitude between the inner and outer disk. However, no information on the amount of matter left in the gap is available, which precludes us from setting precise limits on the planet mass, for now.

astro-ph.SR

Warm dust resolved in the cold disk around T Cha with VLTI/AMBER

The transition between massive Class II circumstellar disks and Class III debris disks, with dust residuals, has not yet been clearly understood. Disks are expected to dissipate with time, and dust clearing in the inner regions can be the consequence of several mechanisms. Planetary formation is one of them that will possibly open a gap inside the disk. According to recent models based on photometric observations, T Cha is expected to present a large gap within its disk, meaning that an inner dusty disk is supposed to have survived close to the star. We investigate this scenario with new near-infrared interferometric observations. We observed T Cha in the H and K bands using the AMBER instrument at VLTI and used the MCFOST radiative transfer code to model the SED of T Cha and the interferometric observations simultaneously and to test the scenario of an inner dusty structure. We also used a toy model of a binary to check that a companion close to the star can reproduce our observations. The scenario of a close (few mas) companion cannot satisfactorily reproduce the visibilities and SED, while a disk model with a large gap and an inner ring producing the bulk of the emission (in H and K-bands) close to 0.1 AU is able to account for all the observations. With this study, the presence of an optically thick inner dusty disk close to the star and dominating the H and K- bands emission is confirmed. According to our model, the large gap extends up to ~ 7.5 AU. This points toward a companion (located at several AU) gap-opening scenario to explain the morphology of T Cha.

astro-ph.SR

VLTI/AMBER spectro-interferometry of the Herbig Be star MWC 297 with spectral resolution 12 000

Circumstellar disks and outflows play a fundamental role in star formation. Infrared spectro-interferometry allows the inner accretion-ejection region to be resolved. We measured interferometric visibilities, wavelength-differential phases, and closure phases of MWC 297 with a spectral resolution of 12000. To interpret our MWC 297 observations, we employed disk-wind models. The measured continuum visibilities confirm previous results that the continuum-emitting region of MWC 297 is remarkably compact. We derive a continuum ring-fit radius of ~2.2 mas (~0.56 AU at a distance of 250 pc), which is ~5.4 times smaller than the 3 AU dust sublimation radius expected for silicate grains (in the absence of radiation-shielding material). The strongly wavelength-dependent and asymmetric Br gamma-emitting region is more extended (~2.7 times) than the continuum-emitting region. At the center of the Br gamma line, we derive a Gaussian fit radius of ~6.3 mas HWHM (~1.6 AU). To interpret the observations, we employ a magneto-centrifugally driven disk-wind model consisting of an accretion disk, which emits the observed continuum radiation, and a disk wind, which emits the Br gamma line. The calculated wavelength-dependent model intensity distributions and Br gamma line profiles are compared with the observations (i.e., K-band spectrum, visibilities, differential phases, and closure phases). The closest fitting model predicts a continuum-emitting disk with an inner radius of ~0.3 AU and a disk wind ejection region with an inner radius of ~0.5 AU (~17.5 stellar radii). We obtain a disk-wind half-opening angle (the angle between the rotation axis and the innermost streamline of the disk wind) of ~80 degrees, which is larger than in T Tau models, and a disk inclination angle of ~20 degrees (i.e., almost pole-on).

astro-ph.SR

Estimating the phase in ground-based interferometry: performance comparison between single-mode and multimode schemes

In this paper we compare the performance of multi and single-mode interferometry for the estimation of the phase of the complex visibility. We provide a theoretical description of the interferometric signal which enables to derive the phase error in presence of detector, photon and atmospheric noises, for both multi and single-mode cases. We show that, despite the loss of flux occurring when injecting the light in the single-mode component (i.e. single-mode fibers, integrated optics), the spatial filtering properties of such single-mode devices often enable higher performance than multimode concepts. In the high flux regime speckle noise dominated, single-mode interferometry is always more efficient, and its performance is significantly better when the correction provided by adaptive optics becomes poor, by a factor of 2 and more when the Strehl ratio is lower than 10%. In low light level cases (detector noise regime), multimode interferometry reaches better performance, yet the gain never exceeds 20%, which corresponds to the percentage of photon loss due to the injection in the guides. Besides, we demonstrate that single-mode interferometry is also more robust to the turbulence in both cases of fringe tracking and phase referencing, at the exception of narrow field of views (<1 arcsec).

astro-ph.IM

PIONIER: a visitor instrument for the VLTI

PIONIER is a 4-telescope visitor instrument for the VLTI, planned to see its first fringes in 2010. It combines four ATs or four UTs using a pairwise ABCD integrated optics combiner that can also be used in scanning mode. It provides low spectral resolution in H and K band. PIONIER is designed for imaging with a specific emphasis on fast fringe recording to allow closure-phases and visibilities to be precisely measured. In this work we provide the detailed description of the instrument and present its updated status.

astro-ph.IM

The 2008 outburst in the young stellar system ZCMa: I. Evidence of an enhanced bipolar wind on the AU-scale

Accretion is a fundamental process in star formation. Although the time evolution of accretion remains a matter of debate, observations and modelling studies suggest that episodic outbursts of strong accretion may dominate the formation of the protostar. Observing young stellar objects during these elevated accretion states is crucial to understanding the origin of unsteady accretion. ZCMa is a pre-main-sequence binary system composed of an embedded Herbig Be star, undergoing photometric outbursts, and a FU Orionis star. The Herbig Be component recently underwent its largest optical photometric outburst detected so far. We aim to constrain the origin of this outburst by studying the emission region of the HI Brackett gamma line, a powerful tracer of accretion/ejection processes on the AU-scale in young stars. Using the AMBER/VLTI instrument at spectral resolutions of 1500 and 12 000, we performed spatially and spectrally resolved interferometric observations of the hot gas emitting across the Brackett gamma emission line, during and after the outburst. From the visibilities and differential phases, we derive characteristic sizes for the Brackett gamma emission and spectro-astrometric measurements across the line, with respect to the continuum. We find that the line profile, the astrometric signal, and the visibilities are inconsistent with the signature of either a Keplerian disk or infall of matter. They are, instead, evidence of a bipolar wind, maybe partly seen through a disk hole inside the dust sublimation radius. The disappearance of the Brackett gamma emission line after the outburst suggests that the outburst is related to a period of strong mass loss rather than a change of the extinction along the line of sight. Based on these conclusions, we speculate that the origin of the outburst is an event of enhanced mass accretion, similar to those occuring in EX Ors and FU Ors.

astro-ph.EP

The complex structure of the disk around HD100546: the inner few astronomical units

Disclosing the structure of disks surrounding Herbig AeBe stars is important to expand our understanding of the formation and early evolution of stars and planets. We aim at revealing the sub-AU disk structure around the 10 Myr old Herbig Be star HD100546 and at investigating the origin of its near and mid-infrared excess. We used AMBER/VLTI observations to resolve the K-band emission and to constrain the location and composition of the hot dust in the innermost disk. Combining AMBER observations with photometric and MIDI/VLTI measurements from the litterature, we revisit the disk geometry using a passive disk model based on 3D radiative transfer. We propose a model that includes a tenuous inner disk made of micron-sized dust grains, a gap, and a massive optically thick outer disk, that successfully reproduces the interferometric data and the SED. We locate the bulk of the K-band emission at ~0.26 AU. Assuming that this emission originates from silicate, we show that micron-sized grains are required to enable the dust to survive at such a distance from the star. As a consequence, more than 40% of the K-band flux is related to scattering, showing that direct thermal emission is not sufficient to explain the near-infrared excess. In the massive outer disk, large grains in the mid-plane are responsible for the mm emission while a surface layer of small grains allows the mid and far infrared excesses to be reproduced. Such vertical structure may be an evidence for sedimentation. The observations are consistent with a model that includes a gap until ~13 AU and a total dust mass of ~0.008 lunar mass inside it. These values together with the derived scale height (~2.5 AU) and temperature (~220 K) at the inner edge of the outer disk (r=13 AU), are consistent with recent CO observations.

astro-ph.SR

Resolving the asymmetric inner wind region of the yellow hypergiant IRC+10420 with VLTI/AMBER in low and high spectral resolution mode

We obtained near-infrared long-baseline interferometry of IRC+10420 with the AMBER instrument of ESO's Very Large Telescope Interferometer (VLTI) in low and high spectral resolution (HR) mode to probe the photosphere and the innermost circumstellar environment of this rapidly evolving yellow hypergiant. In the HR observations, the visibilities show a noticeable drop across the Brackett gamma (BrG) line on all three baselines, and we found differential phases up to -25 degrees in the redshifted part of the BrG line and a non-zero closure phase close to the line center. The calibrated visibilities were corrected for AMBER's limited field-of-view to appropriately account for the flux contribution of IRC+10420's extended dust shell. We derived FWHM Gaussian sizes of 1.05 +/- 0.07 and 0.98 +/- 0.10 mas for IRC+10420's continuum-emitting region in the H and K bands, respectively, and the BrG-emitting region can be fitted with a geometric ring model with a diameter of 4.18 +0.19/-0.09 mas, which is approximately 4 times the stellar size. The geometric model also provides some evidence that the BrG line-emitting region is elongated towards a position angle of 36 degrees, well aligned with the symmetry axis of the outer reflection nebula. The HR observations were further analyzed by means of radiative transfer modeling using CMFGEN and the 2-D Busche & Hillier codes. Our spherical CMFGEN model poorly reproduces the observed line shape, blueshift, and extension, definitively showing that the IRC+10420 outflow is asymmetric. Our 2-D radiative transfer modeling shows that the blueshifted BrG emission and the shape of the visibility across the emission line can be explained with an asymmetric bipolar outflow with a high density contrast from pole to equator (8-16), where the redshifted light is substantially diminished.

astro-ph.SR

Optical configuration and analysis of the AMBER/VLTI instrument

This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance. On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instrument and defined the exact implementation of the AMBER optics. The performance was assessed with laboratory measurements and commissionings at the VLTI, in terms of spectral coverage and resolution, instrumental contrast higher than 0.80, minimum magnitude of 11 in K, absolute visibility accuracy of 1%, and differential phase stability of 1E-3 rad over one minute.

astro-ph

The origin of hydrogen line emission for five Herbig Ae/Be stars spatially resolved by VLTI/AMBER spectro-interferometry

To trace the accretion and outflow processes around YSOs, diagnostic spectral lines such as the BrG 2.166 micron line are widely used, although due to a lack of spatial resolution, the origin of the line emission is still unclear. Employing the AU-scale spatial resolution which can be achieved with infrared long-baseline interferometry, we aim to distinguish between theoretical models which associate the BrG line emission with mass infall or mass outflow processes. Using the VLTI/AMBER instrument, we spatially and spectrally (R=1500) resolved the inner environment of five Herbig Ae/Be stars (HD163296, HD104237, HD98922, MWC297, V921Sco) in the BrG emission line as well as in the adjacent continuum. All objects (except MWC297) show an increase of visibility within the BrG emission line, indicating that the BrG-emitting region in these objects is more compact than the dust sublimation radius. For HD98922, our quantitative analysis reveals that the line-emitting region is compact enough to be consistent with the magnetospheric accretion scenario. For HD163296, HD104237, MWC297, and V921Sco we identify a stellar wind or a disk wind as the most likely line-emitting mechanism. We search for general trends and find that the size of the BrG-emitting region does not seem to depend on the basic stellar parameters, but correlates with the H-alpha line profile shape. We find evidence for at least two distinct BrG line-formation mechanisms. Stars with a P-Cygni H-alpha line profile and a high mass-accretion rate seem to show particularly compact BrG-emitting regions (R_BrG/R_cont<0.2), while stars with a double-peaked or single-peaked H-alpha-line profile show a significantly more extended BrG-emitting region (0.6<R_BrG/R_cont<1.4), possibly tracing a stellar wind or a disk wind.

astro-ph

VSI: the VLTI spectro-imager

The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.

astro-ph

Spatially resolving the hot CO around the young Be star 51 Ophiuchi

51 Oph is one of the few young Be stars displaying a strong CO overtone emission at 2.3 microns in addition to the near infrared excess commonly observed in this type of stars. In this paper we first aim to locate the CO bandheads emitting region. Then, we compare its position with respect to the region emitting the near infrared continuum. We have observed 51 Oph with AMBER in low spectral resolution (R=35), and in medium spectral resolution (R=1500) centered on the CO bandheads. The medium resolution AMBER observations clearly resolve the CO bandheads. Both the CO bandheads and continuum emissions are spatially resolved by the interferometer. Using simple analytical ring models to interpret the measured visibilities, we find that the CO bandheads emission region is compact, located at $0.15_{-0.04}^{0.07}$AU from the star, and that the adjacent continuum is coming from a region further away $0.25_{-0.03}^{0.06}$AU. These results confirm the commonly invoked scenario in which the CO bandheads originate in a dust free hot gaseous disk. Furthermore, the continuum emitting region is closer to the star than the dust sublimation radius (by at least a factor two) and we suggest that hot gas inside the dust sublimation radius significantly contributes to the observed 2 $μ$m continuum emission.

astro-ph

MWC 297: a young high-mass star rotating at critical velocity

MWC 297 is a young massive nearby B[e] star. The central star has a large projected rotational velocity of 350 km/s. Despite the wealth of published observations, the nature of this object and its dust-rich surroundings is not well understood. With the present paper, we shed light on the geometrical structure of the circumstellar matter which produces the near- to mid-infrared flux excess, and construct an overall image of the source's appearance and evolutionary status. The H-, K- and N-band brightness distribution of MWC 297 is probed with the ESO interferometric spectrographs AMBER and MIDI. We have obtained visibility measurements on 3 AMBER and 12 MIDI baselines, covering a wide range of spatial frequencies. We have reconstructed the brightness distribution in H, K and N with a geometric model consisting of three Gaussian disks with different extent and brightness temperature. This model can account for the entire near- to mid-IR emission of MWC 297. The near- and mid-IR emission, including the silicate emission at 10 micron, emanates from a very compact region (FWHM < 1.5 AU) around the central star. We argue that the circumstellar matter in the MWC 297 system is organized in a disk, seen under moderate (i < 40 deg) inclination. The disk displays no inner emission-free gap at the resolution of our interferometric data. The low inclination of the disk implies that the actual rotational velocity of the star exceeds its critical velocity. We discuss the impact of this result in terms of the formation of high-mass stars, and the main-sequence evolution of classical Be stars.

astro-ph

Gas and dust in the inner disk of the Herbig Ae star MWC 758

In this Letter we investigate the origin of the near-infrared emission of the Herbig Ae star MWC 758 on sub-astronomical unit (AU) scales using spectrally dispersed low resolution (R=35) AMBER/VLTI interferometric observations both in the H ($1.7 μ$m) and K ($2.2 μ$m) bands. We find that the K band visibilities and closure phases are consistent with the presence of a dusty disk inner rim located at the dust evaporation distance (0.4 AU) while the bulk of the H band emission arises within 0.1 AU from the central star. Comparing the observational results with theoretical model predictions, we suggest that the H band emission is dominated by an hot gaseous accretion disk.

astro-ph