arXiv subjects

Elisa Vianello

Publications and source records attributed to Elisa Vianello.

28 records · Page 2Linked to original sources

arXiv2021

PCM-trace: Scalable Synaptic Eligibility Traces with Resistivity Drift of Phase-Change Materials

Dedicated hardware implementations of spiking neural networks that combine the advantages of mixed-signal neuromorphic circuits with those of emerging memory technologies have the potential of enabling ultra-low power pervasive sensory processing. To endow these systems with additional flexibility and the ability to learn to solve specific tasks, it is important to develop appropriate on-chip learning mechanisms.Recently, a new class of three-factor spike-based learning rules have been proposed that can solve the temporal credit assignment problem and approximate the error back-propagation algorithm on complex tasks. However, the efficient implementation of these rules on hybrid CMOS/memristive architectures is still an open challenge. Here we present a new neuromorphic building block,called PCM-trace, which exploits the drift behavior of phase-change materials to implement long lasting eligibility traces, a critical ingredient of three-factor learning rules. We demonstrate how the proposed approach improves the area efficiency by >10X compared to existing solutions and demonstrates a techno-logically plausible learning algorithm supported by experimental data from device measurements

cs.ET↗

arXiv2020

Implementation of Ternary Weights with Resistive RAM Using a Single Sense Operation per Synapse

The design of systems implementing low precision neural networks with emerging memories such as resistive random access memory (RRAM) is a significant lead for reducing the energy consumption of artificial intelligence. To achieve maximum energy efficiency in such systems, logic and memory should be integrated as tightly as possible. In this work, we focus on the case of ternary neural networks, where synaptic weights assume ternary values. We propose a two-transistor/two-resistor memory architecture employing a precharge sense amplifier, where the weight value can be extracted in a single sense operation. Based on experimental measurements on a hybrid 130 nm CMOS/RRAM chip featuring this sense amplifier, we show that this technique is particularly appropriate at low supply voltage, and that it is resilient to process, voltage, and temperature variations. We characterize the bit error rate in our scheme. We show based on neural network simulation on the CIFAR-10 image recognition task that the use of ternary neural networks significantly increases neural network performance, with regards to binary ones, which are often preferred for inference hardware. We finally evidence that the neural network is immune to the type of bit errors observed in our scheme, which can therefore be used without error correction.

cs.ET↗

arXiv2020

Embracing the Unreliability of Memory Devices for Neuromorphic Computing

The emergence of resistive non-volatile memories opens the way to highly energy-efficient computation near- or in-memory. However, this type of computation is not compatible with conventional ECC, and has to deal with device unreliability. Inspired by the architecture of animal brains, we present a manufactured differential hybrid CMOS/RRAM memory architecture suitable for neural network implementation that functions without formal ECC. We also show that using low-energy but error-prone programming conditions only slightly reduces network accuracy.

cs.ET↗

arXiv2020

In-Memory Resistive RAM Implementation of Binarized Neural Networks for Medical Applications

The advent of deep learning has considerably accelerated machine learning development. The deployment of deep neural networks at the edge is however limited by their high memory and energy consumption requirements. With new memory technology available, emerging Binarized Neural Networks (BNNs) are promising to reduce the energy impact of the forthcoming machine learning hardware generation, enabling machine learning on the edge devices and avoiding data transfer over the network. In this work, after presenting our implementation employing a hybrid CMOS - hafnium oxide resistive memory technology, we suggest strategies to apply BNNs to biomedical signals such as electrocardiography and electroencephalography, keeping accuracy level and reducing memory requirements. We investigate the memory-accuracy trade-off when binarizing whole network and binarizing solely the classifier part. We also discuss how these results translate to the edge-oriented Mobilenet~V1 neural network on the Imagenet task. The final goal of this research is to enable smart autonomous healthcare devices.

eess.SP↗

arXiv2020

Low Power In-Memory Implementation of Ternary Neural Networks with Resistive RAM-Based Synapse

The design of systems implementing low precision neural networks with emerging memories such as resistive random access memory (RRAM) is a major lead for reducing the energy consumption of artificial intelligence (AI). Multiple works have for example proposed in-memory architectures to implement low power binarized neural networks. These simple neural networks, where synaptic weights and neuronal activations assume binary values, can indeed approach state-of-the-art performance on vision tasks. In this work, we revisit one of these architectures where synapses are implemented in a differential fashion to reduce bit errors, and synaptic weights are read using precharge sense amplifiers. Based on experimental measurements on a hybrid 130 nm CMOS/RRAM chip and on circuit simulation, we show that the same memory array architecture can be used to implement ternary weights instead of binary weights, and that this technique is particularly appropriate if the sense amplifier is operated in near-threshold regime. We also show based on neural network simulation on the CIFAR-10 image recognition task that going from binary to ternary neural networks significantly increases neural network performance. These results highlight that AI circuits function may sometimes be revisited when operated in low power regimes.

cs.ET↗

arXiv2020

Spiking Neural Networks Hardware Implementations and Challenges: a Survey

Neuromorphic computing is henceforth a major research field for both academic and industrial actors. As opposed to Von Neumann machines, brain-inspired processors aim at bringing closer the memory and the computational elements to efficiently evaluate machine-learning algorithms. Recently, Spiking Neural Networks, a generation of cognitive algorithms employing computational primitives mimicking neuron and synapse operational principles, have become an important part of deep learning. They are expected to improve the computational performance and efficiency of neural networks, but are best suited for hardware able to support their temporal dynamics. In this survey, we present the state of the art of hardware implementations of spiking neural networks and the current trends in algorithm elaboration from model selection to training mechanisms. The scope of existing solutions is extensive; we thus present the general framework and study on a case-by-case basis the relevant particularities. We describe the strategies employed to leverage the characteristics of these event-driven algorithms at the hardware level and discuss their related advantages and challenges.

cs.NE↗

arXiv2020

In-situ learning harnessing intrinsic resistive memory variability through Markov Chain Monte Carlo Sampling

Resistive memory technologies promise to be a key component in unlocking the next generation of intelligent in-memory computing systems that can act and learn locally at the edge. However, current approaches to in-memory machine learning focus often on the implementation of models and algorithms which cannot be reconciled with the true, physical properties of resistive memory. Consequently, these properties, in particular cycle-to-cycle conductance variability, are considered as non-idealities that require mitigation. Here by contrast, we embrace these properties by selecting a more appropriate machine learning model and algorithm. We implement a Markov Chain Monte Carlo sampling algorithm within a fabricated array of 16,384 devices, configured as a Bayesian machine learning model. The algorithm is realised in-situ, by exploiting the devices as random variables from the perspective of their cycle-to-cycle conductance variability. We train experimentally the memory array to perform an illustrative supervised learning task as well as a malignant breast tissue recognition task, achieving an accuracy of 96.3%. Then, using a behavioural model of resistive memory calibrated on array level measurements, we apply the same approach to the Cartpole reinforcement learning task. In all cases our proposed approach outperformed software-based neural network models realised using an equivalent number of memory elements. This result lays a foundation for a new path in-memory machine learning, compatible with the true properties of resistive memory technologies, that can bring localised learning capabilities to intelligent edge computing systems.

cs.ET↗

arXiv2019

Digital Biologically Plausible Implementation of Binarized Neural Networks with Differential Hafnium Oxide Resistive Memory Arrays

The brain performs intelligent tasks with extremely low energy consumption. This work takes inspiration from two strategies used by the brain to achieve this energy efficiency: the absence of separation between computing and memory functions, and the reliance on low precision computation. The emergence of resistive memory technologies indeed provides an opportunity to co-integrate tightly logic and memory in hardware. In parallel, the recently proposed concept of Binarized Neural Network, where multiplications are replaced by exclusive NOR (XNOR) logic gates, offers a way to implement artificial intelligence using very low precision computation. In this work, we therefore propose a strategy to implement low energy Binarized Neural Networks, which employs brain-inspired concepts, while retaining energy benefits from digital electronics. We design, fabricate and test a memory array, including periphery and sensing circuits, optimized for this in-memory computing scheme. Our circuit employs hafnium oxide resistive memory integrated in the back end of line of a 130 nanometer CMOS process, in a two transistors - two resistors cell, which allows performing the exclusive NOR operations of the neural network directly within the sense amplifiers. We show, based on extensive electrical measurements, that our design allows reducing the amount of bit errors on the synaptic weights, without the use of formal error correcting codes. We design a whole system using this memory array. We show on standard machine learning tasks (MNIST, CIFAR-10, ImageNet and an ECG task) that the system has an inherent resilience to bit errors. We evidence that its energy consumption is attractive compared to more standard approaches, and that it can use the memory devices in regimes where they exhibit particularly low programming energy and high endurance.

cs.ET↗

arXiv2019

Outstanding Bit Error Tolerance of Resistive RAM-Based Binarized Neural Networks

Resistive random access memories (RRAM) are novel nonvolatile memory technologies, which can be embedded at the core of CMOS, and which could be ideal for the in-memory implementation of deep neural networks. A particularly exciting vision is using them for implementing Binarized Neural Networks (BNNs), a class of deep neural networks with a highly reduced memory footprint. The challenge of resistive memory, however, is that they are prone to device variation, which can lead to bit errors. In this work we show that BNNs can tolerate these bit errors to an outstanding level, through simulations of networks on the MNIST and CIFAR10 tasks. If a standard BNN is used, up to 10^-4 bit error rate can be tolerated with little impact on recognition performance on both MNIST and CIFAR10. We then show that by adapting the training procedure to the fact that the BNN will be operated on error-prone hardware, this tolerance can be extended to a bit error rate of 4x10^-2. The requirements for RRAM are therefore a lot less stringent for BNNs than more traditional applications. We show, based on experimental measurements on a RRAM HfO2 technology, that this result can allow reduce RRAM programming energy by a factor 30.

cs.ET↗

arXiv2019

In-Memory and Error-Immune Differential RRAM Implementation of Binarized Deep Neural Networks

RRAM-based in-Memory Computing is an exciting road for implementing highly energy efficient neural networks. This vision is however challenged by RRAM variability, as the efficient implementation of in-memory computing does not allow error correction. In this work, we fabricated and tested a differential HfO2-based memory structure and its associated sense circuitry, which are ideal for in-memory computing. For the first time, we show that our approach achieves the same reliability benefits as error correction, but without any CMOS overhead. We show, also for the first time, that it can naturally implement Binarized Deep Neural Networks, a very recent development of Artificial Intelligence, with extreme energy efficiency, and that the system is fully satisfactory for image recognition applications. Finally, we evidence how the extra reliability provided by the differential memory allows programming the devices in low voltage conditions, where they feature high endurance of billions of cycles.

cs.ET↗