arXiv subjects

Elynn Wu

Publications and source records attributed to Elynn Wu.

8 recordsLinked to original sources

arXiv2026

Stochastic Emulation of a Fully Coupled Preindustrial E3SMv3 Simulation

We present a stochastic coupled emulator of E3SM version 3, built on the SamudrACE framework, which couples an atmosphere emulator (ACE2) with a full-depth ocean emulator (Samudra). We replace the deterministic atmosphere emulator with its stochastic counterpart, ACE2S, and fine-tune the coupled system with a probabilistic objective, so that the atmosphere acts as a source of internal variability for the ocean. Trained on 105 years of a pre-industrial control simulation and evaluated on an independent 400 years, the emulator reproduces E3SMv3's mean climate state with biases much smaller than existing model-to-observation differences. Relative to a deterministic baseline, stochastic training maintains internal variability across timescales, most notably in the ENSO power spectrum, eddy-rich SST anomalies, and sea ice variability in the marginal ice zone. The emulator captures daily precipitation accurately up to the 99.99th percentile, but underestimates the rarest tropical extremes. These results show that stochastic coupled emulators can reproduce long-timescale variability with high fidelity, while extrapolation to unseen extremes remains a key challenge.

physics.ao-ph↗

arXiv2026

Disentangling the effects of sea surface temperature and CO$_2$ in global machine learned weather-climate emulators

While previous versions of the Ai2 Climate Emulator (ACE) have been trained with CO$_2$ as a forcing, they are only accurate within a narrow range of scenarios, for example climate over the last 80 years forced by observed sea surface temperature (SST), sea ice, and CO$_2$ (AMIP), or equilibrium or near-equilibrium climates with CO$_2$ concentrations ranging from 1x to 4x that of the present day. Attempting to simulate climate forced by AMIP SST perturbed by +4 K or the response to an abrupt quadrupling of CO$_2$, results in unphysical behavior. We attribute this to these models being trained on datasets where the SST and CO$_2$ are correlated, limiting their ability to accurately learn their separate effects. In this study we introduce a new class of "random-CO$_2$" reference simulations where the SST and CO$_2$ are prescribed to vary independently. Trained on a balance of AMIP, equilibrium-climate, and random-CO$_2$ data, and including a total energy conservation constraint for improved interpretability, we present a more data-efficient model that not only accurately emulates its reference model in scenarios in which previous models excelled, but also scenarios like AMIP +4 K and slab-ocean-coupled abrupt 4xCO$_2$ where they did not. Limitations are that it has simplified or prescribed representations of other Earth system components like the ocean, land, and sea ice; does not expose other known climate drivers as forcings; and relies solely on physics-based model output for training data, inheriting the biases relative to observations thereof. Each of these represent opportunities for future work.

physics.ao-ph↗

arXiv2026

FloeNet: A mass-conserving global sea ice emulator that generalizes across climates

We introduce FloeNet, a machine-learning emulator trained on the Geophysical Fluid Dynamics Laboratory global sea ice model, SIS2. FloeNet is a mass-conserving model, emulating 6-hour mass and area budget tendencies related to sea ice and snow-on-sea-ice growth, melt, and advection. We train FloeNet using simulated data from a reanalysis-forced ice-ocean simulation and test its ability to generalize to pre-industrial control and 1% CO2 climates. FloeNet outperforms a non-conservative model at reproducing sea ice and snow-on-sea-ice mean state, trends, and inter-annual variability, with volume anomaly correlations above 0.96 in the Antarctic and 0.76 in the Arctic, across all forcings. FloeNet also produces the correct thermodynamic vs dynamic response to forcing, enabling physical interpretability of emulator output. Finally, we show that FloeNet outputs high-fidelity coupling-related variables, including ice-surface skin temperature, ice-to-ocean salt flux, and melting energy fluxes. We hypothesize that FloeNet will improve polar climate processes within existing atmosphere and ocean emulators.

physics.ao-ph↗

arXiv2025

SamudrACE: Fast and Accurate Coupled Climate Modeling with 3D Ocean and Atmosphere Emulators

Traditional numerical global climate models simulate the full Earth system by exchanging boundary conditions between separate simulators of the atmosphere, ocean, sea ice, land surface, and other geophysical processes. This paradigm allows for distributed development of individual components within a common framework, unified by a coupler that handles translation between realms via spatial or temporal alignment and flux exchange. Following a similar approach adapted for machine learning-based emulators, we present SamudrACE: a coupled global climate model emulator which produces centuries-long simulations at 1-degree horizontal, 6-hourly atmospheric, and 5-daily oceanic resolution, with 145 2D fields spanning 8 atmospheric and 19 oceanic vertical levels, plus sea ice, surface, and top-of-atmosphere variables. SamudrACE is highly stable and has low climate biases comparable to those of its components with prescribed boundary forcing, with realistic variability in coupled climate phenomena such as ENSO that is not possible to simulate in uncoupled mode.

physics.ao-ph↗

arXiv2025

Applying the ACE2 Emulator to SST Green's Functions for the E3SMv3 Global Atmosphere Model

Green's functions are a useful technique for interpreting atmospheric state responses to changes in the spatial pattern of sea surface temperature (SST). Here we train version 2 of the Ai2 Climate Emulator (ACE2) on reference historical SST simulations of the US Department of Energy's EAMv3 global atmosphere model. We compare how well the SST Green's functions generated by ACE2 match those of EAMv3, following the protocol of the Green's Function Model Intercomparison Project (GFMIP). The spatial patterns of top-of-atmosphere (TOA) radiative response from the individual GFMIP SST patch simulations are similar for ACE and the EAMv3 reference. The derived sensitivity of global net TOA radiation sensitivity to SST patch location is qualitatively similar in ACE as in EAMv3, but there are statistically significant discrepancies for some SST patches, especially over the subtropical northeast Pacific. These discrepancies may reflect insufficient diversity in the SST patterns sampled over the course of the EAMv3 AMIP simulation used for training ACE. Both ACE and EAMv3 Green's functions reconstruct the historical record of the global annual-mean TOA radiative flux from a reference EAMv3 AMIP simulation reasonably well. Notably, under our configuration and compute resources, ACE achieves these results approximately 100 times faster in wall-clock time compared to EAMv3, highlighting its potential as a powerful and efficient tool for tackling other computationally intensive problems in climate science.

physics.ao-ph↗

arXiv2024

ACE2-SOM: Coupling an ML atmospheric emulator to a slab ocean and learning the sensitivity of climate to changed CO$_2$

While autoregressive machine-learning-based emulators have been trained to produce stable and accurate rollouts in the climate of the present-day and recent past, none so far have been trained to emulate the sensitivity of climate to substantial changes in CO$_2$ or other greenhouse gases. As an initial step we couple the Ai2 Climate Emulator version 2 to a slab ocean model (hereafter ACE2-SOM) and train it on output from a collection of equilibrium-climate physics-based reference simulations with varying levels of CO$_2$. We test it in equilibrium and non-equilibrium climate scenarios with CO$_2$ concentrations seen and unseen in training. ACE2-SOM performs well in equilibrium-climate inference with both in-sample and out-of-sample CO$_2$ concentrations, accurately reproducing the emergent time-mean spatial patterns of surface temperature and precipitation change with CO$_2$ doubling, tripling, or quadrupling. In addition, the vertical profile of atmospheric warming and change in extreme precipitation rates up to the 99.9999th percentile closely agree with the reference model. Non-equilibrium-climate inference is more challenging. With CO$_2$ increasing gradually at a rate of 2% year$^{-1}$, ACE2-SOM can accurately emulate the global annual mean trends of surface and lower-to-middle atmosphere fields but produces unphysical jumps in stratospheric fields. With an abrupt quadrupling of CO$_2$, ML-controlled fields transition unrealistically quickly to the 4xCO$_2$ regime. In doing so they violate global energy conservation and exhibit unphysical sensitivities of and surface and top of atmosphere radiative fluxes to instantaneous changes in CO$_2$. Future emulator development needed to address these issues should improve its generalizability to diverse climate change scenarios.

physics.ao-ph↗

arXiv2024

ACE2: Accurately learning subseasonal to decadal atmospheric variability and forced responses

Existing machine learning models of weather variability are not formulated to enable assessment of their response to varying external boundary conditions such as sea surface temperature and greenhouse gases. Here we present ACE2 (Ai2 Climate Emulator version 2) and its application to reproducing atmospheric variability over the past 80 years on timescales from days to decades. ACE2 is a 450M-parameter autoregressive machine learning emulator, operating with 6-hour temporal resolution, 1° horizontal resolution and eight vertical layers. It exactly conserves global dry air mass and moisture and can be stepped forward stably for arbitrarily many steps with a throughput of about 1500 simulated years per wall clock day. ACE2 generates emergent phenomena such as tropical cyclones, the Madden Julian Oscillation, and sudden stratospheric warmings. Furthermore, it accurately reproduces the atmospheric response to El Niño variability and global trends of temperature over the past 80 years. However, its sensitivities to separately changing sea surface temperature and carbon dioxide are not entirely realistic.

physics.ao-ph↗

arXiv2022

Productive Performance Engineering for Weather and Climate Modeling with Python

Earth system models are developed with a tight coupling to target hardware, often containing specialized code predicated on processor characteristics. This coupling stems from using imperative languages that hard-code computation schedules and layout. We present a detailed account of optimizing the Finite Volume Cubed-Sphere Dynamical Core (FV3), improving productivity and performance. By using a declarative Python-embedded stencil domain-specific language and data-centric optimization, we abstract hardware-specific details and define a semi-automated workflow for analyzing and optimizing weather and climate applications. The workflow utilizes both local and full-program optimization, as well as user-guided fine-tuning. To prune the infeasible global optimization space, we automatically utilize repeating code motifs via a novel transfer tuning approach. On the Piz Daint supercomputer, we scale to 2,400 GPUs, achieving speedups of up to 3.92x over the tuned production implementation at a fraction of the original code.

cs.DC↗