arXiv subjects

Enze Xie

Publications and source records attributed to Enze Xie.

At least 19 recordsLinked to original sources

arXiv2026

Sol-Attn: Accelerating Video Generation Inference via On-the-Fly Attention Sparsification

Diffusion transformers are essential for high-fidelity video generation, but long token sequences make attention a dominant inference bottleneck. Training-free dynamic sparse attention alleviates this bottleneck by computing only selected key-value blocks, yet existing methods struggle to sparsify attention both efficiently and accurately for two reasons: (1) Rigid, unpredictable, and costly routing: selecting a fixed fraction of top-ranked blocks by proxy score imposes fixed budgets, whereas retaining blocks to reach a target cumulative proxy probability mass yields dynamic but potentially imbalanced budgets; both incur non-negligible overhead from computing and materializing proxy scores. (2) Lossy keep-or-drop sparsification: unselected blocks are discarded entirely, degrading accuracy under aggressive sparsity. These limitations motivate cheaper dynamic-budget routing while limiting accuracy degradation. In this paper, we introduce training-free Sol-Attn (Sparsifying online attention), which unifies dynamic routing, sparse computation, and approximation correction in a single online-softmax pass, achieving a better accuracy-efficiency trade-off in sparse attention. The core of Sol-Attn is on-the-fly block thresholding with proxy-score reuse, which selects critical blocks by comparing block proxy scores against a threshold during online softmax. This design enables dynamic yet controllable block budgets without materializing the proxy map, while directly reusing the proxy scores of unselected blocks to approximate their contribution. Experiments across image and video generation tasks show that Sol-Attn advances the quality-efficiency frontier of training-free sparse attention, delivering 2.1 times and 2.3 times end-to-end speedups for video generation and editing, respectively, while preserving visual quality.

cs.CV↗

arXiv2026

SANA-Video 2.0: Hybrid Linear Attention with Attention Residuals for Efficient Video Generation

We introduce SANA-Video 2.0, a hybrid video diffusion transformer instantiated at 5B and 14B scales under a unified architecture. Designed to generate high-quality video up to 720p on a single GPU, SANA-Video 2.0 matches full-softmax video DiTs in quality while retaining the favorable long-sequence scaling of linear attention. To avoid quadratic attention throughout, Hybrid Linear-Softmax Attention combines gated linear attention for O(N)-dominated mixing with periodic gated-softmax anchors at a 3:1 ratio, restoring the full-rank token interactions that pure linear attention lacks. To propagate these refreshed representations across depth, Block Attention Residuals (AttnRes) route completed block summaries into later linear layers, enabling anchor-feature reuse and boosting deep-layer effective rank by ~12%. Through from-scratch training, SANA-Video 2.0 learns the complete hybrid directly rather than linearizing pretrained models, with reduced-resolution proxy studies establishing 25% softmax as the optimal quality-efficiency trade-off. With 40-step sampling, SANA-Video 2.0 achieves a VBench score of 84.30 in 13.2s at 480p on a single H100, remaining competitive with far larger softmax video DiTs at a fraction of the latency. Its compiled DiT forward pass is 3.2x faster than a matched full-softmax baseline at 720p/60s, a gap that expands with video duration. Furthermore, full-stack Sol-Engine optimization (kernel fusion, caching, and sparse attention) accelerates this hardware-friendly backbone by a further 3.58x, bringing the 5B pipeline to 13.06s at 720p/5s and making it 120x faster than Wan 2.2-A14B on one H100. Overall, our hybrid design recovers softmax-level expressiveness at substantially reduced cost, unlocking scalable long, high resolution video generation.

cs.CV↗

arXiv2026

Nemotron-Labs-Diffusion: A Tri-Mode Language Model Unifying Autoregressive, Diffusion, and Self-Speculation Decoding

We introduce Nemotron-Labs-Diffusion, a tri-mode language model (LM) that unifies AR, diffusion, and self-speculation decoding within a single architecture. Trained with a joint AR-diffusion objective, Nemotron-Labs-Diffusion can switch modes to sustain high throughput across deployment settings and concurrency levels. Our study shows that (1) AR and diffusion objectives are complementary: diffusion improves lookahead planning, while AR provides left-to-right linguistic priors. (2) In self-speculation mode, diffusion drafts while AR verifies, outperforming multi-token prediction (MTP) methods in both acceptance rate and real-device efficiency. (3) A speed-of-light analysis further demonstrates diffusion's long-term potential, with up to 76.5% more tokens per forward pass than self-speculation under an optimal sampler. Scaling to 3B, 8B, and 14B parameters, our Nemotron-Labs-Diffusion family, including base, instruct, and vision-language models, consistently outperforms state-of-the-art open-source AR and diffusion LMs in both accuracy and speed. For example, Nemotron-Labs-Diffusion-8B decodes 6x more tokens per forward than Qwen3-8B with comparable accuracy, translating to 4x higher throughput on SPEED-Bench with SGLang on a GB200 GPU.

cs.CL↗

arXiv2026

RoboDojo: A Unified Sim-and-Real Benchmark for Comprehensive Evaluation of Generalist Robot Manipulation Policies

Generalist robot manipulation policies have advanced rapidly, yet existing benchmarks remain limited in systematically evaluating their capabilities. Many rely on simple, short-horizon, or skill-narrow tasks with limited capability coverage, and are often conducted only in simulation or only in the real world. Simulation enables scalable feedback but misses physical deployment challenges, while real-world evaluation is costly, time-consuming, and difficult to reproduce. We introduce RoboDojo, a unified sim-and-real benchmark for comprehensive evaluation of generalist robot manipulation policies. RoboDojo includes 42 simulation tasks and 18 real-world tasks covering diverse and complementary manipulation capabilities. The simulation benchmark evaluates five dimensions: generalization, memory, precision, long-horizon execution, and open-vocabulary instruction following, while the real-world benchmark exposes policies to challenging physical-world deployment conditions. RoboDojo supports scalable evaluation through heterogeneous parallel simulation in Isaac Sim and provides RoboDojo-RealEval, a reproducible real-world evaluation system with remote cloud access, standardized hardware, scene reset, evaluation protocol, and deployment interface. Together with XPolicyLab, policies can be integrated once and evaluated across simulation and real-world settings with minimal adaptation. We integrate 30 policies into XPolicyLab and evaluate them on RoboDojo, establishing a public leaderboard and systematic analysis of current policy performance. The website is available at http://robodojo-benchmark.com/.

cs.RO↗

arXiv2026

PhysisForcing: Physics Reinforced World Simulator for Robotic Manipulation

Video generation models have emerged as a promising paradigm for embodied world simulation. However, both general-domain video generators and robot-specific data fine-tuned models can still produce physically implausible manipulations, including discontinuous motion trajectories and inconsistent robot-object interactions, which limits their reliability as world simulators. Through extensive experiments, we find that such physical instability mainly arises from two factors: deformation of moving objects and implausible spatio-temporal correlations among interacting entities, particularly during contact. Building on this observation, we propose PhysisForcing, a scalable training framework that strengthens physical consistency by focusing supervision on physics-informative regions through joint optimization of pixel-level and semantic-level features. The framework consists of a pixel-level trajectory alignment loss, which supervises DiT features using reference point trajectories, and a semantic-level relational alignment loss, which aligns DiT features with inter-region relations extracted from a frozen video understanding encoder. Extensive experiments on R-Bench, PAI-Bench, and EZS-Bench show that PhysisForcing consistently improves embodied video generation over strong baselines, improving the Wan2.2-I2V-A14B and Cosmos3-Nano base models on R-Bench by 22.3\% and 9.2\% (7.1\% and 3.7\% over vanilla finetuning), with the Cosmos3-Nano variant attaining the best overall score. Beyond generation, as a world model under the WorldArena action-planner protocol it raises the closed-loop success rate from 16.0\% to 24.0\% and further improves downstream policy success, indicating that physically aligned video models yield stronger representations for robotic manipulation.

cs.CV↗

arXiv2026

Sol Video Inference Engine: Agent-Native Full-Stack Acceleration Framework for Efficient Video Generation

Modern video diffusion models achieve higher generation quality through scaling, but this also increases inference cost. Although many acceleration methods have been proposed, a central challenge is that the most effective acceleration strategy is highly instance-specific: a recipe that works well for one combination of model, hardware, and inference configuration often does not transfer to another. Different models vary in architecture, numerical sensitivity, and attention concentration patterns. Inference settings differ in spatial and temporal resolution and video duration, while hardware platforms differ in memory hierarchy, supported numerical formats, and kernel throughput. These factors create a large tuning space, making manual performance engineering costly. We present Sol Video Inference Engine, an agentic, native, training-free acceleration framework for video diffusion models. It organizes five broadly applicable techniques, cache, sparse attention, token pruning, quantization, and kernel fusion, into an agentic acceleration stack for instance-specific optimization. For a concrete deployment target defined by a model, hardware platform, and serving configuration, parallel skill agents optimize the implementation of each technique, an agent integrator composes them into a global acceleration stack, and a human validator provides feedback on generation quality. We instantiate this workflow on three video models with different sizes and architectures: 64B Cosmos3-Super, 22B LTX-2.3, and 2B SANA-Video. With little human effort, the full stack achieves more than 2x end-to-end acceleration while maintaining near-lossless VBench quality, demonstrating the effectiveness of the agent framework for video diffusion acceleration.

cs.CV↗

arXiv2026

HumanScale: Egocentric Human Video Can Outperform Real-Robot Data for Embodied Pretraining

Embodied foundation models are expected to benefit from data scaling like large language models, but face a much tighter data bottleneck. Teleoperated real-robot trajectories remain the dominant pretraining source due to their precise action supervision and embodiment alignment, yet their scalability is limited by high collection cost, acquisition difficulty, and low behavioral and environmental diversity. These limitations have sparked interest in egocentric human video as a scalable, substantially lower-cost, and more diverse alternative for embodied model pretraining. However, its effectiveness compared to teleoperated real-robot data remains underexplored. To address this question, we conduct a systematic study comparing egocentric human video and teleoperated real-robot trajectories as pretraining data sources for embodied foundation models, under fixed post-training and validation protocols. Surprisingly, we find that egocentric data, when processed through a carefully designed filtering and labeling pipeline, is not merely a viable substitute for model pretraining but can lead to superior performance. With the same amount of pretraining data, models pretrained on egocentric data achieve a 24% lower validation loss on real-robot action prediction, as well as 52.5% and 90% higher success rates on in-distribution and out-of-distribution real-robot task execution, respectively. This finding verifies a scalable paradigm for embodied foundation models: pretrain on egocentric human video to learn diverse world representations, then adapt with a small amount of labeled real-robot data for action-space alignment. We hope this study encourages broader exploration of egocentric data and offers guidance for data quality assessment before costly robot data collection.

cs.CV↗

arXiv2026

Light Interaction: Training-Free Inference Acceleration for Interactive Video World Models

Interactive video world models generate video chunk by chunk in response to user-controlled camera movements, enabling applications such as real-time game simulation, virtual scene navigation, and embodied AI training. However, scaling to long interactive trajectories is prohibitively expensive due to growing context memory, quadratic attention complexity, and repeated denoising steps. We present Light Interaction, a training-free inference acceleration framework for interactive video world models. Our key insight is that interaction naturally enables trajectory-dependent adaptive computation: retrieved spatial memory can be discarded during novel exploration, temporal context can be adjusted according to local latent dynamics, and early-step model outputs can be reused when the camera revisits familiar regions. Based on this insight, Light Interaction combines adaptive context management, denoising cache acceleration, and hardware-software co-designed 3D block sparse attention with fused Triton kernels. Evaluated on HY-WorldPlay and Matrix-Game-3.0, Light Interaction achieves up to 2.59x speedup without model retraining while maintaining competitive visual quality.

cs.CV↗

arXiv2026

SANA-Streaming: Real-time Streaming Video Editing with Hybrid Diffusion Transformer

Real-time streaming video-to-video editing (V2V) is critical for interactive applications such as live broadcasting and gaming, yet it remains a formidable challenge due to the stringent requirements for temporal consistency and inference throughput. In this paper, we present SANA-Streaming, a system-algorithm co-designed framework for high-resolution, real-time streaming video editing on consumer GPUs, with the following three core designs: (1) Hybrid Diffusion Transformer architecture introduces softmax attention in part of the blocks to improve local modeling capabilities while preserving the efficiency of linear layers. (2) Cycle-Reverse Regularization is a novel training strategy that enforces semantic consistency by predicting source frames from generated content via flow matching, improving temporal consistency without requiring paired long edited videos. (3) Efficient System Co-design combines fused GDN kernels and Mixed-Precision Quantization (MPQ) optimized for the NVIDIA Blackwell (RTX 5090) architecture. By profiling real-world throughput, our MPQ maximizes Tensor Core utilization while maintaining generation quality. The resulting system achieves real-time 1280 x 704 resolution editing at 24 end-to-end FPS on a single RTX 5090 GPU, with the DiT core running at 58 FPS. Experimental results demonstrate that our co-design approach significantly outperforms existing SOTA methods in both temporal coherence and system throughput.

cs.CV↗

arXiv2026

Fast-dDrive: Efficient Block-Diffusion VLM for Autonomous Driving

End-to-end autonomous driving via Vision-Language-Action (VLA) models demands a precarious balance between high-fidelity trajectory planning and efficient inference. Existing paradigms typically fall short: autoregressive (AR) VLAs are memory-bandwidth-bound on edge hardware and prone to exposure-bias drift, while full-sequence diffusion models preclude KV-cache reuse and suffer from "logical leakage" that violates the fundamental perceive-then-plan causality. We present Fast-dDrive, a block-diffusion VLA that performs bidirectional refinement within semantic units while enforcing strict causal ordering across them. Leveraging the observation that driving VLAs often emit structured JSON-like outputs, Fast-dDrive freezes structural tokens into a section scaffold and employs a section-aware training recipe that prioritizes safety-critical planning. We further introduce Scaffold Speculative Decoding to achieve AR-equivalent quality at significantly higher throughput. Finally, we propose a low-overhead test-time scaling scheme: by forking $N$ stochastic trajectory rollouts from a single shared-prefix KV cache and averaging them, we effectively suppress prediction variance at a fractional computational cost. Empirical results demonstrate that Fast-dDrive redefines the speed-accuracy frontier for driving agents. On the WOD-E2E test set, Fast-dDrive achieves SOTA ADE@3s and ADE@5s, alongside the highest RFS among diffusion-based VLAs; on nuScenes, it reduces average L2 error to $0.32$m (a $22\%$ improvement). When integrated with SGLang, our framework delivers $12\times$ throughput speedup over the AR baseline, narrowing the gap between high-capacity VLAs and the efficiency demands of real-time on-vehicle deployment.

cs.CL↗

arXiv2026

LongLive-2.0: An NVFP4 Parallel Infrastructure for Long Video Generation

We present LongLive-2.0, an NVFP4-based parallel infrastructure throughout the full training and inference workflow of long video generation, addressing speed and memory bottlenecks. For training, we introduce sequence-parallel autoregressive (AR) training, instantiated as Balanced SP, which co-designs the efficient teacher-forcing layout with SP execution by pairing clean-history and noisy-target temporal chunks on each rank, enabling a natural teacher-forcing mask with SP-aware chunked VAE encoding. Combined with NVFP4 precision, it reduces GPU memory cost and accelerates GEMM computation during training, the proportion of which increases as video length grows. Moreover, we show that a high-quality infrastructure and dataset enable a remarkably clean training pipeline. Unlike existing Self-Forcing series methods that rely on ODE initialization and subsequent distribution matching distillation (DMD), LongLive-2.0 directly tunes a diffusion model into a long, multi-shot, interactive auto-regressive (AR) diffusion model. It can be further converted to real-time generation (4 to 2 denoising steps) with standalone LoRA weights. For inference on Blackwell GPUs, we enable W4A4 NVFP4 inference, quantize KV cache into NVFP4 for memory savings, and boost end-to-end throughput with asynchronous streaming VAE decoding. On non-Blackwell GPU architectures, we deploy SP inference to match the speed on Blackwell GPUs, while the quantized KV cache can lower inter-GPU communication of SP. Experiments show up to 2.15x speedup in training, and 1.84x in inference. LongLive-2.0-5B achieves 45.7 FPS inference while attaining strong performance on benchmarks. To our knowledge, LongLive-2.0 is the first NVFP4 training and inference system for long video generation.

cs.CV↗

arXiv2026

SANA-WM: Efficient Minute-Scale World Modeling with Hybrid Linear Diffusion Transformer

We introduce SANA-WM, an efficient 2.6B-parameter open-source world model natively trained for one-minute generation, synthesizing high-fidelity, 720p, minute-scale videos with precise camera control. SANA-WM achieves visual quality comparable to large-scale industrial baselines such as LingBot-World and HY-WorldPlay, while significantly improving efficiency. Four core designs drive our architecture: (1) Hybrid Linear Attention combines frame-wise Gated DeltaNet (GDN) with softmax attention for memory-efficient long-context modeling. (2) Dual-Branch Camera Control ensures precise 6-DoF trajectory adherence. (3) Two-Stage Generation Pipeline applies a long-video refiner to stage-1 outputs, improving quality and consistency across sequences. (4) Robust Annotation Pipeline extracts accurate metric-scale 6-DoF camera poses from public videos to yield high-quality, spatiotemporally consistent action labels. Driven by these designs, SANA-WMdemonstrates remarkable efficiency across data, training compute, and inference hardware: it uses only $\sim$213K public video clips with metric-scale pose supervision, completes training in 15 days on 64 H100s, and generates each 60s clip on a single GPU; its distilled variant can be deployed on a single RTX 5090 with NVFP4 quantization to denoise a 60s 720p clip in 34s. On our one-minute world-model benchmark, SANA-WM demonstrates stronger action-following accuracy than prior open-source baselines and achieves comparable visual quality at $36\times$ higher throughput for scalable world modeling.

cs.CV↗

arXiv2026

Fast-dVLM: Efficient Block-Diffusion VLM via Direct Conversion from Autoregressive VLM

Vision-language models (VLMs) predominantly rely on autoregressive decoding, which generates tokens one at a time and fundamentally limits inference throughput. This limitation is especially acute in physical AI scenarios such as robotics and autonomous driving, where VLMs are deployed on edge devices at batch size one, making AR decoding memory-bandwidth-bound and leaving hardware parallelism underutilized. While block-wise discrete diffusion has shown promise for parallel text generation, extending it to VLMs remains challenging due to the need to jointly handle continuous visual representations and discrete text tokens while preserving pretrained multimodal capabilities. We present Fast-dVLM, a block-diffusion-based VLM that enables KV-cache-compatible parallel decoding and speculative block decoding for inference acceleration. We systematically compare two AR-to-diffusion conversion strategies: a two-stage approach that first adapts the LLM backbone with text-only diffusion fine-tuning before multimodal training, and a direct approach that converts the full AR VLM in one stage. Under comparable training budgets, direct conversion proves substantially more efficient by leveraging the already multimodally aligned VLM; we therefore adopt it as our recommended recipe. We introduce a suite of multimodal diffusion adaptations, block size annealing, causal context attention, auto-truncation masking, and vision efficient concatenation, that collectively enable effective block diffusion in the VLM setting. Extensive experiments across 11 multimodal benchmarks show Fast-dVLM matches its autoregressive counterpart in generation quality. With SGLang integration and FP8 quantization, Fast-dVLM achieves over 6x end-to-end inference speedup over the AR baseline.

cs.CL↗

arXiv2026

FP4 Explore, BF16 Train: Diffusion Reinforcement Learning via Efficient Rollout Scaling

Reinforcement-Learning-based post-training has recently emerged as a promising paradigm for aligning text-to-image diffusion models with human preferences. In recent studies, increasing the rollout group size yields pronounced performance improvements, indicating substantial room for further alignment gains. However, scaling rollouts on large-scale foundational diffusion models (e.g., FLUX.1-12B) imposes a heavy computational burden. To alleviate this bottleneck, we explore the integration of FP4 quantization into Diffusion RL rollouts. Yet, we identify that naive quantized pipelines inherently introduce risks of performance degradation. To overcome this dilemma between efficiency and training integrity, we propose Sol-RL (Speed-of-light RL), a novel FP4-empowered Two-stage Reinforcement Learning framework. First, we utilize high-throughput NVFP4 rollouts to generate a massive candidate pool and extract a highly contrastive subset. Second, we regenerate these selected samples in BF16 precision and optimize the policy exclusively on them. By decoupling candidate exploration from policy optimization, Sol-RL integrates the algorithmic mechanisms of rollout scaling with the system-level throughput gains of NVFP4. This synergistic algorithm-hardware design effectively accelerates the rollout phase while reserving high-fidelity samples for optimization. We empirically demonstrate that our framework maintains the training integrity of BF16 precision pipeline while fully exploiting the throughput gains enabled by FP4 arithmetic. Extensive experiments across SANA, FLUX.1, and SD3.5-L substantiate that our approach delivers superior alignment performance across multiple metrics while accelerating training convergence by up to $4.64\times$, unlocking the power of massive rollout scaling at a fraction of the cost.

cs.LG↗

arXiv2026

MHLA: Restoring Expressivity of Linear Attention via Token-Level Multi-Head

While the Transformer architecture dominates many fields, its quadratic self-attention complexity hinders its use in large-scale applications. Linear attention offers an efficient alternative, but its direct application often degrades performance, with existing fixes typically re-introducing computational overhead through extra modules (e.g., depthwise separable convolution) that defeat the original purpose. In this work, we identify a key failure mode in these methods: global context collapse, where the model loses representational diversity. To address this, we propose Multi-Head Linear Attention (MHLA), which preserves this diversity by computing attention within divided heads along the token dimension. We prove that MHLA maintains linear complexity while recovering much of the expressive power of softmax attention, and verify its effectiveness across multiple domains, achieving a 3.6\% improvement on ImageNet classification, a 6.3\% gain on NLP, a 12.6\% improvement on image generation, and a 41\% enhancement on video generation under the same time complexity.

cs.CV↗

arXiv2025

Efficient-DLM: From Autoregressive to Diffusion Language Models, and Beyond in Speed

Diffusion language models (dLMs) have emerged as a promising paradigm that enables parallel, non-autoregressive generation, but their learning efficiency lags behind that of autoregressive (AR) language models when trained from scratch. To this end, we study AR-to-dLM conversion to transform pretrained AR models into efficient dLMs that excel in speed while preserving AR models' task accuracy. We achieve this by identifying limitations in the attention patterns and objectives of existing AR-to-dLM methods and then proposing principles and methodologies for more effective AR-to-dLM conversion. Specifically, we first systematically compare different attention patterns and find that maintaining pretrained AR weight distributions is critical for effective AR-to-dLM conversion. As such, we introduce a continuous pretraining scheme with a block-wise attention pattern, which remains causal across blocks while enabling bidirectional modeling within each block. We find that this approach can better preserve pretrained AR models' weight distributions than fully bidirectional modeling, in addition to its known benefit of enabling KV caching, and leads to a win-win in accuracy and efficiency. Second, to mitigate the training-test gap in mask token distributions (uniform vs. highly left-to-right), we propose a position-dependent token masking strategy that assigns higher masking probabilities to later tokens during training to better mimic test-time behavior. Leveraging this framework, we conduct extensive studies of dLMs' attention patterns, training dynamics, and other design choices, providing actionable insights into scalable AR-to-dLM conversion. These studies lead to the Efficient-DLM family, which outperforms state-of-the-art AR models and dLMs, e.g., our Efficient-DLM 8B achieves +5.4%/+2.7% higher accuracy with 4.5x/2.7x higher throughput compared to Dream 7B and Qwen3 4B, respectively.

cs.CL↗

arXiv2025

ChronoEdit: Towards Temporal Reasoning for Image Editing and World Simulation

Recent advances in large generative models have greatly enhanced both image editing and in-context image generation, yet a critical gap remains in ensuring physical consistency, where edited objects must remain coherent. This capability is especially vital for world simulation related tasks. In this paper, we present ChronoEdit, a framework that reframes image editing as a video generation problem. First, ChronoEdit treats the input and edited images as the first and last frames of a video, allowing it to leverage large pretrained video generative models that capture not only object appearance but also the implicit physics of motion and interaction through learned temporal consistency. Second, ChronoEdit introduces a temporal reasoning stage that explicitly performs editing at inference time. Under this setting, target frame is jointly denoised with reasoning tokens to imagine a plausible editing trajectory that constrains the solution space to physically viable transformations. The reasoning tokens are then dropped after a few steps to avoid the high computational cost of rendering a full video. To validate ChronoEdit, we introduce PBench-Edit, a new benchmark of image-prompt pairs for contexts that require physical consistency, and demonstrate that ChronoEdit surpasses state-of-the-art baselines in both visual fidelity and physical plausibility. Project page for code and models: https://research.nvidia.com/labs/toronto-ai/chronoedit

cs.CV↗

arXiv2025

Understanding the Mixture-of-Experts with Nadaraya-Watson Kernel

Mixture-of-Experts (MoE) has become a cornerstone in recent state-of-the-art large language models (LLMs). Traditionally, MoE relies on $\mathrm{Softmax}$ as the router score function to aggregate expert output, a designed choice that has persisted from the earliest MoE models to modern LLMs, and is now widely regarded as standard practice. However, the necessity of using $\mathrm{Softmax}$ to project router weights into a probability simplex remains an unchallenged assumption rather than a principled design choice. In this work, we first revisit the classical Nadaraya-Watson regression and observe that MoE shares the same mathematical formulation as Nadaraya-Watson regression. Furthermore, we show that both feed-forward neural network (FFN) and MoE can be interpreted as a special case of Nadaraya-Watson regression, where the kernel function corresponds to the input neurons of the output layer. Motivated by these insights, we propose the \textbf{zero-additional-cost} Kernel Inspired Router with Normalization (KERN), an FFN-style router function, as an alternative to $\mathrm{Softmax}$. We demonstrate that this router generalizes both $\mathrm{Sigmoid}$- and $\mathrm{Softmax}$-based routers. \textbf{Based on empirical observations and established practices in FFN implementation, we recommend the use of $\mathrm{ReLU}$ activation and $\ell_2$-normalization in $\mathrm{KERN}$ router function.} Comprehensive experiments in MoE and LLM validate the effectiveness of the proposed FFN-style router function \methodNorm.

cs.CL↗