SearcharxivSearch

arXiv subjects

Eran Greenberg

Publications and source records attributed to Eran Greenberg.

18 recordsLinked to original sources

Silvanite AuAgTe$_4$: a rare case of gold superconducting material

Gold is one of the most inert metals, forming very few compounds, some with rather interesting properties, and only two of them currently known to be superconducting under certain conditions (AuTe$_2$ and SrAuSi$_3$). Compounds of another noble element, Ag, are also relatively rare, and very few of them are superconducting. Finding new superconducting materials containing gold (and silver) is a challenge - especially having in mind that the best high-$T_c$ superconductors at normal conditions are based upon their rather close ''relative'', Cu. Here we report combined X-ray diffraction, Raman, and resistivity measurements, as well as first-principles calculations, to explore the effect of hydrostatic pressure on the properties of the sylvanite mineral, AuAgTe$_4$. Our experimental results, supported by density functional theory, reveal a structural phase transition at $\sim$5 GPa from a monoclinic $P2/c$ to $P2/m$ phase, resulting in almost identical coordinations of Au and Ag ions, with rather uniform interatomic distances. Further, resistivity measurements show the onset of superconductivity at $\sim$1.5 GPa in the $P2/c$ phase, followed by a linear increase of $T_c$ up to the phase transition, with a maximum in the $P2/m$ phase, and a gradual decrease afterwards. Our calculations indicate phonon-mediated superconductivity, with the electron-phonon coupling coming predominantly from the low-energy phonon modes. Thus, along with the discovery of a new superconducting compound of gold/silver, our results advance understanding of the mechanism of the superconductivity in Au-containing compounds, which may pave the way to the discovery of novel ones.

cond-mat.str-el

Superconductor-insulator transitions in three-dimensional indium-oxide at high pressures

Experiments investigating magnetic-field-tuned superconductor-insulator transition (HSIT) mostly focus on two-dimensional material systems where the transition and its proximate ground-state phases, often exhibit features that are seemingly at odds with the expected behavior. Here we present a complementary study of a three-dimensional pressure-packed amorphous indium-oxide (InOx) powder where granularity controls the HSIT. Above a low threshold pressure of ~0.2 GPa, vestiges of superconductivity are detected, although neither a true superconducting transition nor insulating behavior are observed. Instead, a saturation at very high resistivity at low pressure is followed by saturation at very low resistivity at higher pressure. We identify both as different manifestations of anomalous metallic phases dominated by superconducting fluctuations. By analogy with previous identification of the low resistance saturation as a "failed superconductor", our data suggests that the very high resistance saturation is a manifestation of a "failed insulator". Above a threshold pressure of ~6 GPa, the sample becomes fully packed, and superconductivity is robust, with TC tunable with pressure. A quantum critical point at PC~25 GPa marks the complete suppression of superconductivity. For a finite pressure below PC, a magnetic field is shown to induce a HSIT from a true zero-resistance superconducting state to a weakly insulating behavior. Determining the critical field, HC, we show that similar to the 2D behavior, the insulating-like state maintains a superconducting character, which is quenched at higher field, above which the magnetoresistance decreases to its fermionic normal state value.

cond-mat.supr-con

A latent heat method to detect melting and freezing of metals at megabar pressures

The high-pressure melting curves of metals provide simple and useful tests for theories of melting, as well as important constraints for the modeling of planetary interiors. Here, we present an experimental technique that reveals the latent heat of fusion of a metal sample compressed inside a diamond anvil cell. The technique combines microsecond-timescale pulsed electrical heating with an internally-heated diamond anvil cell for the first time. Further, we use the technique to measure the melting curve of platinum to the highest pressure measured to date. Melting temperature increases from $\sim 3000$ K at 34 GPa to $\sim 4500$ K at 107 GPa, thermodynamic conditions that are between the steep and shallow experimental melting curves reported previously. The melting curve is a linear function of compression over the 0 to 20% range of compression studied here, allowing a good fit to the Kraut-Kennedy empirical model with fit parameter $C=6.0$.

cond-mat.mtrl-sci

Stabilization of hexazine rings in potassium polynitride at high pressure

Polynitrogen molecules represent the ultimate high energy-density materials as they have a huge potential chemical energy originating from their high enthalpy. However, synthesis and storage of such compounds remain a big challenge because of difficulties to find energy efficient synthetic routes and stabilization mechanisms. Compounds of metals with nitrogen represent promising candidates for realization of energetic polynitrogen compounds, which are also environmentally benign. Here we report the synthesis of polynitrogen planar N6 hexazine rings, stabilized in K2N6 compound, which was formed from K azide upon laser heating in a diamond anvil cell at high pressures in excess of 45 GPa and remains metastable down to 20 GPa. Synchrotron X-ray diffraction and Raman spectroscopy are used to identify this material, also exhibiting metallic luster, being all consistent with theoretically predicted structural, vibrational and electronic properties. The documented here N6 hexazine rings represent new highly energetic polynitrogens, which have a potential for future recovery and utilization.

cond-mat.mtrl-sci

High-pressure structural study of a-Mn: solving a three decades-old mystery

Manganese, in the a-Mn structure, has been studied using synchrotron powder x-ray diffraction in a diamond anvil cell up to 220 GPa at room temperature combined with density functional calculations (DFT). The experiment reveals an extended pressure stability of the a-Mn phase up to the highest pressure of this study, in contrast with previous experimental and theoretical studies. On the other hand, calculations reveal that the previously predicted hcp-Mn phase becomes lower in enthalpy than the a-Mn phase above 160 GPa. The apparent discrepancy is explained due to a substantial electron transfer between Mn ions, which stabilizes the a-Mn phase through the formation of ionic bonding between monatomic ions under pressure.

cond-mat.mtrl-sci

Novel hydrogen clathrate hydrate

We report a new hydrogen clathrate hydrate synthesized at 1.2 GPa and 298 K documented by single-crystal X-ray diffraction, Raman spectroscopy, and first-principles calculations. The oxygen sublattice of the new clathrate hydrate matches that of ice II, while hydrogen molecules are in the ring cavities, which results in the trigonal R3c or R-3c space group (proton ordered or disordered, respectively) and the composition of (H2O)6H2. Raman spectroscopy and theoretical calculations reveal a hydrogen disordered nature of the new phase C1', distinct from the well-known ordered C1 clathrate, to which this new structure transforms upon compression and/or cooling. This new clathrate phase can be viewed as a realization of a disordered ice II, unobserved before, in contrast to all other ordered ice structures.

cond-mat.mtrl-sci

Anomalous high-temperature superconductivity in YH$_6$

Pressure-stabilized hydrides are a new rapidly growing class of high-temperature superconductors which is believed to be described within the conventional phonon-mediated mechanism of coupling. Here we report the synthesis of yttrium hexahydride Im3m-YH$_6$ that demonstrates the superconducting transition with T$_c$ = 224 K at 166 GPa, much lower than the theoretically predicted (>270 K). The measured upper critical magnetic field B$_c$$_2$(0) of YH$_6$ was found to be 116-158 T, which is 2-2.5 times larger than the calculated value. A pronounced shift of T$_c$ in yttrium deuteride YD$_6$ with the isotope coefficient 0.4 supports the phonon-assisted superconductivity. Current-voltage measurements showed that the critical current I$_c$ and its density J$_c$ may exceed 1.75 A and 3500 A/mm$^2$ at 0 K, respectively, which is comparable with the parameters of commercial superconductors, such as NbTi and YBCO. The superconducting density functional theory (SCDFT) and anharmonic calculations suggest unusually large impact of the Coulomb repulsion in this compound. The results indicate notable departures of the superconducting properties of the discovered YH$_6$ from the conventional Migdal-Eliashberg and Bardeen-Cooper-Schrieffer theories.

cond-mat.supr-con

Synthesis of clathrate cerium superhydride CeH9 below 100 GPa with atomic hydrogen sublattice

Hydrogen-rich superhydrides are believed to be very promising high-Tc superconductors as they are expected to mimic characteristics of metallic hydrogen. Recent experiments discovered superhydrides at very high pressures, e.g. FeH5 at 130 GPa and LaH10 at 170 GPa. With the motivation of discovering new hydrogen-rich high-Tc superconductors at lowest possible pressure, here we report the prediction and experimental synthesis of cerium superhydride CeH9 below 100 GPa in the laser-heated diamond anvil cell. Ab-initio calculations were carried to evaluate the detailed chemistry of the Ce-H system and to understand the structure, stability and superconductivity of CeH9. CeH9 crystallizes in a P63/mmc clathrate structure with a substantially dense 3-dimensional hydrogen sublattice at 100 GPa. These findings shed a new light on the search for superhydrides in close proximity with atomic hydrogen within a feasible pressure range. Discovery of superhydride CeH9 provides a practical platform to further investigate and understand conventional superconductivity in hydrogen rich superhydrides.

cond-mat.mtrl-sci

High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re$_{2}$(N$_{2}$)N$_{2}$ stable at ambient conditions

Here we report the synthesis of metallic, ultraincompressible (bulk modulus $K_{0}$ = 428(10) GPa) and very hard (nanoindentation hardness 36.7(8) GPa) rhenium (V) nitride pernitride Re$_{2}$(N$_{2}$)N$_{2}$. While the empirical chemical formula of the compound, ReN$_{2}$, is the same as for other known transition metals pernitrides, e.g. IrN$_{2}$, PtN$_{2}$, PdN$_{2}$ and OsN$_{2}$, its crystal chemistry is unique. The known pernitrides of transition metals consist of a metal in the oxidation state +IV and pernitride anions N$_{2}^{4-}$. ReN$_{2}$ contains both pernitride N$_{2}^{4-}$ and discrete N$^{3-}$ anions, which explains its exceptional properties. Moreover, in the original experimental synthesis of Re$_{2}$(N$_{2}$)N$_{2}$ performed in a laser-heated diamond anvil cell via a direct reaction between rhenium and nitrogen at pressures from 40 to 90 GPa we observed that the material was recoverable at ambient conditions. Consequently, we developed a route to scale up its synthesis through a reaction between rhenium and ammonium azide, NH$_{4}$N$_{3}$, in a large-volume press at 33 GPa. Our work resulted not only in a discovery of a novel material with unusual crystal chemistry and a set of properties attractive for potential applications, but also demonstrated a feasibility of surmounting conceptions common in material sciences.

cond-mat.mtrl-sci

Helium-hydrogen immiscibility at high pressures

Hydrogen and helium are the most abundant elements in the universe and they constitute the interiors of gas giant planets. Thus, their equations of states, phase, chemical state, and chemical reactivity at extreme conditions are of great interest. Applying Raman spectroscopy, visual observation, and synchrotron X-ray diffraction in diamond anvil cells (DAC), we performed experiments on H2-He 1:1 and D2-He 1:10 compressed gas mixture up to 100 GPa at 300 K. By comparing with the available data on pure bulk materials, we find no sign of miscibility, chemical reactivity, and new compound formation.

cond-mat.mtrl-sci

Uranium polyhydrides at moderate pressures: prediction, synthesis, and expected superconductivity

Hydrogen-rich hydrides attract great attention due to recent theoretical (1) and then experimental discovery of record high-temperature superconductivity in H3S (Tc = 203 K at 155 GPa (2)). Here we search for stable uranium hydrides at pressures up to 500 GPa using ab initio evolutionary crystal structure prediction. Chemistry of the U-H system turned out to be extremely rich, with 14 new compounds, including hydrogen-rich UH5, UH6, U2H13, UH7, UH8, U2H17, and UH9. Their crystal structures are based on either common f.c.c. or h.c.p. uranium sublattice and unusual H8 cubic clusters. Our high-pressure experiments at 1-103 GPa confirm the predicted UH7, UH8, and three different phases of UH5, raising confidence about predictions of the other phases. Many of the newly predicted phases are expected to be high-temperature superconductors. The highest-Tc superconductor is UH7 predicted to be thermodynamically stable at pressures above 22 GPa (with Tc = 44-54 K) and this phase remains dynamically stable upon decompression to zero pressure (with Tc = 57-66 K).

cond-mat.mtrl-sci

Anharmonicity-induced isostructural phase transition of Zirconium under pressure

We have performed a detailed x-ray diffraction structural study of Zr under pressure and unambiguously identify the existence of a first-order isostructural bcc-to-bcc phase transition near 58 GPa. First-principles quantum molecular dynamics lattice dynamics calculations support the existence of this phase transition, in excellent agreement with experimental results, triggered by anharmonic effects. Our results highlight the potential ubiquity of anharmonically driven isostructural transitions within the periodic table under pressure and calls for follow-up experimental and theoretical studies.

cond-mat.mtrl-sci

Pressure induced spin crossover in disordered α-LiFeO2

Structural, magnetic and electrical-transport properties of α-LiFeO2, crystallizing in the rock salt structure with random distribution of Li and Fe ions, have been studied by synchrotron X-ray diffraction, 57Fe Mössbauer spectroscopy and electrical resistance measurements at pressures up to 100 GPa using diamond anvil cells. It was found that the crystal structure is stable at least to 82 GPa, though a significant change in compressibility has been observed above 50 GPa. The changes in the structural properties are found to be on a par with a sluggish Fe3+ high- to low-spin (HS-LS) transition (S=5/2 to S=1/2) starting at 50 GPa and not completed even at ~100 GPa. The HS-LS transition is accompanied by an appreciable resistance decrease remaining a semiconductor up to 115 GPa and is not expected to be metallic even at about 200 GPa. The observed feature of the pressure-induced HS-LS transition is not an ordinary behavior of ferric oxides at high pressures. The effect of Fe3+ nearest and next nearest neighbors on the features of the spin crossover is discussed.

cond-mat.str-el

Superconductor-insulator transition in fcc-GeSb2Te4 at elevated pressures

We show that polycrystalline GeSb2Te4 in the fcc phase (f-GST), which is an insulator at low temperature at ambient pressure, becomes a superconductor at elevated pressures. Our study of the superconductor to insulator transition versus pressure at low temperatures reveals a second order quantum phase transition with linear scaling (critical exponent close to unity) of the transition temperature with the pressure above the critical zero-temperature pressure. In addition, we demonstrate that at higher pressures the f-GST goes through a structural phase transition via amorphization to bcc GST (b-GST), which also become superconducting. We also find that the pressure regime where an inhomogeneous mixture of amorphous and b-GST exists, there is an anomalous peak in magnetoresistance, and suggest an explanation for this anomaly.

cond-mat.supr-con

Synthesis of Xenon and Iron/Nickel intermetallic compounds at Earth's core thermodynamic conditions

Although Xe is known to form stable compounds with strong electronegative elements, evidence on the formation of stable compounds with electropositive elements, such as Fe and Ni, was missing until very recently. In addition to the significance of the emerging field of noble gas elements chemistry, the possible formation of Xe-Fe/Ni compounds has been proposed as a plausible explanation of the so-called "missing Xe paradox". Here we explore the possible formation of stable compounds in the Xe-Fe/Ni systems at thermodynamic conditions representative of Earth's core. Using in situ synchrotron X-ray diffraction and Raman spectroscopy in concert with first principles calculations we demonstrate the synthesis of stable Xe(Fe,Fe/Ni)$_3$ and XeNi$_3$ compounds. The results indicate the changing chemical properties of elements under extreme conditions where noble gas elements can form stable compounds with elements which are electropositive at ambient conditions but become slightly electronegative at high pressures.

physics.chem-ph

Raman spectroscopy and X-ray diffraction of sp3-CaCO3 at lower mantle pressures

The exceptional ability of carbon to form sp2 and sp3 bonding states leads to a great structural and chemical diversity of carbon-bearing phases at non-ambient conditions. Here we use laser-heated diamond anvil cells combined with synchrotron x-ray diffraction, Raman spectroscopy, and first-principles calculations to explore phase transitions in CaCO3 at P > 40 GPa. We find that post-aragonite CaCO3 transforms to the previously predicted P21/c-CaCO3 with sp3-hybridized carbon at 105 GPa (~30 GPa higher than the theoretically predicted crossover pressure). The lowest enthalpy transition path to P21/c-CaCO3 includes reoccurring sp2- and sp3-CaCO3 intermediate phases and transition states, as reveled by our variable-cell nudged elastic band simulation. Raman spectra of P21/c-CaCO3 show an intense band at 1025 cm-1, which we assign to the symmetric C-O stretching vibration based on empirical and first principles calculations. This Raman band has a frequency that is ~20 % lower than the symmetric C-O stretching in sp2-CaCO3, due to the C-O bond length increase across the sp2-sp3 transition, and can be used as a fingerprint of tetrahedrally-coordinated carbon in other carbonates.

physics.geo-ph

Stable high-pressure phases in the H-S system determined by chemically reacting hydrogen and sulfur

Synchrotron X-ray diffraction and Raman spectroscopy have been used to study chemical reactions of molecular hydrogen (H2) with sulfur (S) at high pressures. We find theoretically predicted Cccm and Im-3m H3S to be the reaction products at 50 and 140 GPa, respectively. Im-3m H3S is a stable crystalline phase above 140 GPa and it transforms to R3m H3S on pressure release below 140 GPa. The latter phase is (meta)stable down to at least 70 GPa where it transforms to Cccm H3S upon annealing (T<1300 K) to overcome the kinetic hindrance. Cccm H3S has an extended structure with symmetric hydrogen bonds at 50 GPa and upon decompression it experiences a transformation to a molecular mixed H2S-H2 structure below 40 GPa without any apparent change in the crystal symmetry.

cond-mat.supr-con

Size-Dependent Structural Phase Transitions in SrTiO3 Nanoparticles

Understanding the structural phase diagram of nano scale SrTiO3 has important implications on the basic physics and applications of the general class of transition metal oxide perovskites. Pressure dependent structural measurements on monodispersed nanoscale SrTiO3 samples with average diameters of 10 to ~80 nm were conducted. A robust pressure independent polar structure was detected in the 10 nm sample for pressures of up to 13 GPa while a size dependent cubic to tetragonal transition occurs (at P = Pc) for larger particle sizes. The results suggest that the growth of ~10 nm STO particles on substrates with large lattice mismatch will not alter the polar state of the system for a large range of strain values, possibly enabling device use.

cond-mat.mtrl-sci