arXiv subjects

Eric Pop

Publications and source records attributed to Eric Pop.

At least 55 records · Page 3Linked to original sources

arXiv2021

Pinpointing the Dominant Component of Contact Resistance to Atomically Thin Semiconductors

Achieving good electrical contacts is one of the major challenges in realizing devices based on atomically thin two-dimensional (2D) semiconductors. Several studies have examined this hurdle, but a universal understanding of the contact resistance and an underlying approach to its reduction are currently lacking. In this work we expose the shortcomings of the classical contact resistance model in describing contacts to 2D materials, and offer a correction based on the addition of a lateral pseudo-junction resistance component (Rjun). We use a combination of unique contact resistance measurements to experimentally characterize Rjun for Ni contacts to monolayer MoS2. We find that Rjun is the dominating component of the contact resistance in undoped 2D devices and show that it is responsible for most of the back-gate bias and temperature dependence. Our corrected model and experimental results help understand the underlying physics of state-of-the-art contact engineering approaches in the context of minimizing Rjun.

physics.app-ph↗

arXiv2021

Toward Low-Temperature Solid-Source Synthesis of Monolayer MoS2

Two-dimensional (2D) semiconductors have been proposed for heterogeneous integration with existing silicon technology; however, their chemical vapor deposition (CVD) growth temperatures are often too high. Here, we demonstrate direct CVD solid-source precursor synthesis of continuous monolayer (1L) MoS$_2$ films at 560 C in 50 min, within the 450-to-600 C, 2 h thermal budget window required for back-end-of-the-line compatibility with modern silicon technology. Transistor measurements reveal on-state current up to ~140 $\mathrm{μA/μm}$ at 1 V drain-to-source voltage for 100 nm channel lengths, the highest reported to date for 1L MoS$_2$ grown below 600 C using solid-source precursors. The effective mobility from transfer length method test structures is $\mathrm{29 \pm 5\ cm^2V^{-1}s^{-1}}$ at $\mathrm{6.1 \times 10^{12}\ cm^{-2}}$ electron density, which is comparable to mobilities reported from films grown at higher temperatures. The results of this work provide a path toward the realization of high-quality, thermal-budget-compatible 2D semiconductors for heterogeneous integration with silicon manufacturing.

physics.app-ph↗

arXiv2021

Uncovering Thermal and Electrical Properties of Sb2Te3/GeTe Superlattice Films

Superlattice-like phase change memory (SL-PCM) promises lower switching current than conventional PCM based on Ge2Sb2Te5 (GST). However, a fundamental understanding of SL-PCM requires detailed characterization of the interfaces within such a SL. Here, we explore the electrical and thermal transport of SLs with deposited Sb2Te3 and GeTe alternating layers of various thicknesses. We find up to ~4X reduction of the effective cross-plane thermal conductivity of the SL stack (as-deposited polycrystalline) compared to polycrystalline GST (as-deposited amorphous and later annealed) due to the thermal interface resistances within the SL. Thermal measurements with varying periods of our SLs show a signature of phonon coherence with a transition from wave-like to particle-like phonon transport, further described by our modeling. Electrical resistivity measurements of such SLs reveal strong anisotropy (~2000X) between the in-plane and cross-plane directions due to the weakly interacting van der Waals gaps. This work uncovers electro-thermal transport in SLs based on Sb2Te3 and GeTe, for improved design of low-power PCM.

cond-mat.mtrl-sci↗

arXiv2021

Engineering thermal transport across layered graphene-MoS2 superlattices

Layering two-dimensional van der Waals materials provides unprecedented control over atomic placement, which could enable tailoring of vibrational spectra and heat flow at the sub-nanometer scale. Here, using spatially-resolved ultrafast thermoreflectance and spectroscopy, we uncover the design rules governing cross-plane heat transport in superlattices assembled from monolayers of graphene (G) and MoS2 (M). Using a combinatorial experimental approach, we probe nine different stacking sequences: G, GG, MG, GGG, GMG, GGMG, GMGG, GMMG, GMGMG and identify the effects of vibrational mismatch, interlayer adhesion, and junction asymmetry on thermal transport. Pure G sequences display signatures of quasi-ballistic transport, whereas adding even a single M layer strongly disrupts heat conduction. The experimental data are described well by molecular dynamics simulations which include thermal expansion, accounting for the effect of finite temperature on the interlayer spacing. The simulations show that a change of only 1.5% in the layer separation can lead to a nearly 100% increase of the thermal resistance. Using these design rules, we experimentally demonstrate a 5-layer GMGMG superlattice with an ultralow effective cross-plane thermal conductivity comparable to air, paving the way for a new class of thermal metamaterials with extreme properties.

cond-mat.mes-hall↗

arXiv2021

Enhanced Meta-Displays Using Advanced Phase-Change Materials

Structural colors generated due to light scattering from static all-dielectric metasurfaces have successfully enabled high-resolution, high-saturation, and wide-gamut color printing applications. Despite recent advances, most demonstrations of these structure-dependent colors lack post-fabrication tunability. This hinders their applicability for front-end dynamic display technologies. Phase-change materials (PCMs), with significant contrast of their optical properties between their amorphous and crystalline states, have demonstrated promising potentials in reconfigurable nanophotonics. Herein, we leverage tunable all-dielectric reflective metasurfaces made of newly emerged classes of low-loss optical PCMs, i.e., antimony trisulphide (Sb$_2$S$_3$) and antimony triselenide (Sb$_2$Se$_3$), with superb characteristics to realize switchable, high-saturation, high-efficiency and high-resolution dynamic meta-pixels. Exploiting polarization-sensitive building blocks, the presented meta-pixel can generate two different colors when illuminated by either one of two orthogonally polarized incident beams. Such degrees of freedom (i.e., material phase and polarization state) enable a single reconfigurable metasurface with fixed geometrical parameters to generate four distinct wide-gamut colors. We experimentally demonstrate, for the first time, an electrically-driven micro-scale display through the integration of phase-change metasurfaces with an on-chip heater formed by transparent conductive oxide. Our experimental findings enable a versatile platform suitable for a wide range of applications, including tunable full-color printing, enhanced dynamic displays, information encryption, and anti-counterfeiting.

physics.optics↗

arXiv2021

Lateral Transport and Field-Effect Characteristics of Sputtered P-Type Chalcogenide Thin Films

Investigating lateral electrical transport in p-type thin film chalcogenides is important to evaluate their potential for field-effect transistors (FETs) and phase-change memory applications. For instance, p-type FETs with sputtered materials at low temperature (<= 250 C) could play a role in flexible electronics or back-end-of-line (BEOL) silicon-compatible processes. Here, we explore lateral transport in chalcogenide films (Sb2Te3, Ge2Sb2Te5, Ge4Sb6Te7) and multilayers, with Hall measurements (in <= 50 nm thin films) and with p-type transistors (in <= 5 nm ultrathin films). The highest Hall mobilities are measured for Sb2Te3/GeTe superlattices (~18 cm2/V/s at room temperature), over 2-3x higher than the other films. In ultrathin p-type FETs with Ge2Sb2Te5, we achieve field-effect mobility up to ~5.5 cm2/V/s with current on/off ratio ~10000, the highest for Ge2Sb2Te5 transistors to date. We also explore process optimizations (e.g., AlOx capping layer, type of developer for lithography) and uncover their trade-offs towards the realization of p-type transistors with acceptable mobility and on/off current ratio. Our study provides essential insights into the optimization of electronic devices based on p-type chalcogenides.

cond-mat.mtrl-sci↗

arXiv2021

Vibrational Properties of a Naturally Occurring Semiconducting van der Waals heterostructure

We present vibrational properties of Franckeite, which is a naturally occurring van der Waals heterostructure consisting of two different semiconducting layers. Franckeite is a complex layered crystal composed of alternating SnS$_2$ like pseudohexagonal and PbS-like pseudotetragonal layers stacked on top of each other, providing a unique platform to study vibrational properties and thermal transport across layers with mass density and phonon mismatches. By using micro-Raman spectroscopy and first-principles Raman simulations, we found that the PbS-like pseudotetragonal structure is mostly composed of Pb$_3$SbS$_4$. We also discovered several low-frequency Raman modes that originate from the intralayer vibrations of the pseudotetragonal layer. Using density functional theory, we determined all vibrational patterns of Franckeite, whose signatures are observed in the Raman spectrum. By studying temperature dependent Raman spectroscopy (300 K - 500 K), we have found different temperature coefficients for both pseudotetragonal and pseudohexagonal layers. We believe that our study will help understand the vibration modes of its complex heterostructure and the thermal properties at the nanoscale.

cond-mat.mes-hall↗

arXiv2021

High-Specific-Power Flexible Transition Metal Dichalcogenide Solar Cells

Semiconducting transition metal dichalcogenides (TMDs) are promising for flexible high-specific-power photovoltaics due to their ultrahigh optical absorption coefficients, desirable band gaps and self-passivated surfaces. However, challenges such as Fermi-level pinning at the metal contact-TMD interface and the inapplicability of traditional doping schemes have prevented most TMD solar cells from exceeding 2% power conversion efficiency (PCE). In addition, fabrication on flexible substrates tends to contaminate or damage TMD interfaces, further reducing performance. Here, we address these fundamental issues by employing: 1) transparent graphene contacts to mitigate Fermi-level pinning, 2) $\rm{MoO}_\it{x}$ capping for doping, passivation and anti-reflection, and 3) a clean, non-damaging direct transfer method to realize devices on lightweight flexible polyimide substrates. These lead to record PCE of 5.1% and record specific power of $\rm{4.4\ W\,g^{-1}}$ for flexible TMD ($\rm{WSe_2}$) solar cells, the latter on par with prevailing thin-film solar technologies cadmium telluride, copper indium gallium selenide, amorphous silicon and III-Vs. We further project that TMD solar cells could achieve specific power up to $\rm{46\ W\,g^{-1}}$, creating unprecedented opportunities in a broad range of industries from aerospace to wearable and implantable electronics.

physics.app-ph↗

arXiv2021

Scaling Theory of Two-Dimensional Field Effect Transistors

We present a scaling theory of two-dimensional (2D) field effect transistors (FETs). For devices with channel thickness less than 4 nm, the device electrostatics is dominated by the physical gate oxide thickness and not the effective oxide thickness. Specifically, for symmetric double gate (DG) FETs the scale length (Λ) varies linearly with the gate oxide thickness(t_{ox}) as Λ ~ 3/4t_{ox}. The gate oxide dielectric permittivity and the semiconductor channel thickness do not affect the device electrostatics for such device geometries. For an asymmetric device such as single gate (SG) FETs, the fringing fields have a second order effect on the scale length. However, like symmetric DG FETs, the scale length in asymmetric FETs is also ultimately limited by the physical gate oxide thickness. We compare our theoretical predictions for scaled monolayer MoS2 DG FETs.

cond-mat.mes-hall↗

arXiv2021

Improving Electric Contacts to Two-Dimensional Semiconductors

Electrical contact resistance to two-dimensional (2D) semiconductors such as monolayer MoS_{2} is a key bottleneck in scaling the 2D field effect transistors (FETs). The 2D semiconductor in contact with three-dimensional metal creates unique current crowding that leads to increased contact resistance. We developed a model to separate the contribution of the current crowding from the intrinsic contact resistivity. We show that current crowding can be alleviated by doping and contact patterning. Using Landauer-Büttiker formalism, we show that van der Waals (vdW) gap at the interface will ultimately limit the electrical contact resistance. We compare our models with experimental data for doped and undoped MoS_{2} FETs. Even with heavy charge-transfer doping of > 2x10^{13} cm^{-2}, we show that the state-of-the-art contact resistance is 100 times larger than the ballistic limit. Our study highlights the need to develop efficient interface to achieve contact resistance of < 10 Ω.μm, which will be ideal for extremely scaled devices.

cond-mat.mes-hall↗

arXiv2021

Uncovering Phase Change Memory Energy Limits by Sub-Nanosecond Probing of Power Dissipation Dynamics

Phase change memory (PCM) is one of the leading candidates for neuromorphic hardware and has recently matured as a storage class memory. Yet, energy and power consumption remain key challenges for this technology because part of the PCM device must be self-heated to its melting temperature during reset. Here, we show that this reset energy can be reduced by nearly two orders of magnitude by minimizing the pulse width. We utilize a high-speed measurement setup to probe the energy consumption in PCM cells with varying pulse width (0.3 to 40 nanoseconds) and uncover the power dissipation dynamics. A key finding is that the switching power (P) remains unchanged for pulses wider than a short thermal time constant of the PCM ($τ$$_t$$_h$ < 1 ns in 50 nm diameter device), resulting in a decrease of energy (E=P$τ$) as the pulse width $τ$ is reduced in that range. In other words, thermal confinement during short pulses is achieved by limiting the heat diffusion time. Our improved programming scheme reduces reset energy density below 0.1 nJ/$μ$m$^2$, over an order of magnitude lower than state-of-the-art PCM, potentially changing the roadmap of future data storage technology and paving the way towards energy-efficient neuromorphic hardware

cond-mat.mes-hall↗

arXiv2021

Electrically driven programmable phase-change meta-switch reaching 80% efficiency

Despite recent advances in active metaoptics, wide dynamic range combined with high-speed reconfigurable solutions is still elusive. Phase-change materials (PCMs) offer a compelling platform for metasurface optical elements, owing to the large index contrast and fast yet stable phase transition properties. Here, we experimentally demonstrate an in situ electrically-driven reprogrammable metasurface by harnessing the unique properties of a phase-change chalcogenide alloy, Ge$_{2}$Sb$_{2}$Te$_{5}$ (GST), in order to realize fast, non-volatile, reversible, multilevel, and pronounced optical modulation in the near-infrared spectral range. Co-optimized through a multiphysics analysis, we integrate an efficient heterostructure resistive microheater that indirectly heats and transforms the embedded GST film without compromising the optical performance of the metasurface even after several reversible phase transitions. A hybrid plasmonic-PCM meta-switch with a record electrical modulation of the reflectance over eleven-fold (an absolute reflectance contrast reaching 80%), unprecedented quasi-continuous spectral tuning over 250 nm, and switching speed that can potentially reach a few kHz is presented. Our work represents a significant step towards the development of fully integrable dynamic metasurfaces and their potential for beamforming applications.

physics.optics↗

arXiv2021

Spectral Decomposition of Thermal Conductivity: Comparing Velocity Decomposition Methods in Homogeneous Molecular Dynamics Simulations

The design of new applications, especially those based on heterogeneous integration, must rely on detailed knowledge of material properties, such as thermal conductivity (TC). To this end, multiple methods have been developed to study TC as a function of vibrational frequency. Here, we compare three spectral TC methods based on velocity decomposition in homogenous molecular dynamics simulations: Green-Kubo modal analysis (GKMA), the spectral heat current (SHC) method, and a method we propose called homogeneous nonequilibrium modal analysis (HNEMA). First, we derive a convenient per-atom virial expression for systems described by general many-body potentials, enabling compact representations of the heat current, each velocity decomposition method, and other related quantities. Next, we evaluate each method by calculating the spectral TC for carbon nanotubes, graphene, and silicon. We show that each method qualitatively agrees except at optical phonon frequencies, where a combination of mismatched eigenvectors and a large density of states produces artificial TC peaks for modal analysis methods. Our calculations also show that the HNEMA and SHC methods converge much faster than the GKMA method, with the SHC method being the most computationally efficient. Finally, we demonstrate that our single-GPU modal analysis implementation in GPUMD (Graphics Processing Units Molecular Dynamics) is over 1000 times faster than the existing LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator) implementation on one CPU.

cond-mat.mtrl-sci↗

arXiv2021

High-Performance Flexible Nanoscale Field-Effect Transistors Based on Transition Metal Dichalcogenides

Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) are good candidates for high-performance flexible electronics. However, most demonstrations of such flexible field-effect transistors (FETs) to date have been on the micron scale, not benefitting from the short-channel advantages of 2D-TMDs. Here, we demonstrate flexible monolayer MoS2 FETs with the shortest channels reported to date (down to 50 nm) and remarkably high on-current (up to 470 uA/um at 1 V drain-to-source voltage) which is comparable to flexible graphene or crystalline silicon FETs. This is achieved using a new transfer method wherein contacts are initially patterned on the rigid TMD growth substrate with nanoscale lithography, then coated with a polyimide (PI) film which becomes the flexible substrate after release, with the contacts and TMD. We also apply this transfer process to other TMDs, reporting the first flexible FETs with MoSe2 and record on-current for flexible WSe2 FETs. These achievements push 2D semiconductors closer to a technology for low-power and high-performance flexible electronics.

cond-mat.mtrl-sci↗

arXiv2021

Field-effect at electrical contacts to two-dimensional materials

The inferior electrical contact to two-dimensional (2D) materials is a critical challenge for their application in post-silicon very large-scale integrated circuits. Electrical contacts were generally related to their resistive effect, quantified as contact resistance. With a systematic investigation, this work demonstrates a capacitive metal-insulator-semiconductor (MIS) field-effect at the electrical contacts to 2D materials: the field-effect depletes or accumulates charge carriers, redistributes the voltage potential, and give rise to abnormal current saturation and nonlinearity. On the one hand, the current saturation hinders the devices' driving ability, which can be eliminated with carefully engineered contact configurations. On the other hand, by introducing the nonlinearity to monolithic analog artificial neural network circuits, the circuits' perception ability can be significantly enhanced, as evidenced using a COVID-19 critical illness prediction model. This work provides a comprehension of the field-effect at the electrical contacts to 2D materials, which is fundamental to the design, simulation, and fabrication of electronics based on 2D material.

physics.app-ph↗

arXiv2020

High Current Density in Monolayer MoS$_2$ Doped by AlO$_x$

Semiconductors require stable doping for applications in transistors, optoelectronics, and thermoelectrics. However, this has been challenging for two-dimensional (2D) materials, where existing approaches are either incompatible with conventional semiconductor processing or introduce time-dependent, hysteretic behavior. Here we show that low temperature (< 200$^\circ$ C) sub-stoichiometric AlO$_x$ provides a stable n-doping layer for monolayer MoS$_2$, compatible with circuit integration. This approach achieves carrier densities > 2x10$^{13}$ 1/cm$^2$, sheet resistance as low as ~7 kOhm/sq, and good contact resistance ~480 Ohm.um in transistors from monolayer MoS$_2$ grown by chemical vapor deposition. We also reach record current density of nearly 700 uA/um (>110 MA/cm$^2$) in this three-atom-thick semiconductor while preserving transistor on/off current ratio > $10^6$. The maximum current is ultimately limited by self-heating and could exceed 1 mA/um with better device heat sinking. With their 0.1 nA/um off-current, such doped MoS$_2$ devices approach several low-power transistor metrics required by the international technology roadmap

physics.app-ph↗

arXiv2020

Size scaling, dynamics, and electro-thermal bifurcation of VO2 Mott oscillators

Traditional electronic devices are well-known to improve in speed and energy-efficiency as their dimensions are reduced to the nanoscale. However, this scaling behavior remains unclear for nonlinear dynamical circuit elements, such as Mott neuron-like spiking oscillators, which are of interest for bio-inspired computing. Here we show that shrinking micrometer-sized VO2 oscillators to sub-100 nm effective sizes, achieved using a nanogap cut in a metallic carbon nanotube (CNT) electrode, does not guarantee faster spiking. However, an additional heat source such as Joule heating from the CNT, in combination with small size and heat capacity (defined by the narrow volume of VO2 whose insulator-metal transition is triggered by the CNT), can increase the spiking frequency by ~1000x due to an electro-thermal bifurcation in the nonlinear dynamics. These results demonstrate that nonlinear dynamical switches operate in a complex phase space which can be controlled by careful electro-thermal design, offering new tuning parameters for designing future biomimetic electronics.

cond-mat.mtrl-sci↗

arXiv2020

Application-Driven Synthesis and Characterization of Hexagonal Boron Nitride on Metal and Carbon Nanotube Substrates

Hexagonal boron nitride (h-BN) is unique among two-dimensional materials, with a large band gap (~6 eV) and high thermal conductivity (>400 W/m/K), second only to diamond among electrical insulators. Most electronic studies to date have relied on h-BN exfoliated from bulk crystals; however, for scalable applications the material must be synthesized by methods such as chemical vapor deposition (CVD). Here, we demonstrate single- and few-layer h-BN synthesized by CVD on single crystal platinum and on carbon nanotube (CNT) substrates, also comparing these films with h-BN deposited on the more commonly used polycrystalline Pt and Cu growth substrates. The h-BN film grown on single crystal Pt has a lower surface roughness and is more spatially homogeneous than the film from a polycrystalline Pt foil, and our electrochemical transfer process allows for these expensive foils to be reused with no measurable degradation. In addition, we demonstrate monolayer h-BN as an ultrathin, 3.33 $\unicode{x212B}$ barrier protecting MoS2 from damage at high temperatures and discuss other applications that take advantage of the conformal h-BN deposition on various substrates demonstrated in this work.

cond-mat.mtrl-sci↗