arXiv subjects

Erio Tosatti

Publications and source records attributed to Erio Tosatti.

At least 55 records · Page 3Linked to original sources

arXiv2017

Mechanical dissipation at a tip-induced Kondo onset

The onset or demise of Kondo effect in a magnetic impurity on a metal surface can be triggered, as often observed, by the simple mechanical nudging of a tip. This mechanically-driven quantum phase transition must reflect in a corresponding mechanical dissipation peak; yet, this kind of effect has not been focused upon so far. Aiming at the simplest theoretical modeling, we initially treat the impurity as a non-interacting resonant level turned cyclically on and off, and obtain a dissipation per cycle which is proportional to the hybridization $Γ$, with a characteristic temperature dependent resonant peak value. A better treatment is obtained next by solving an Anderson impurity model by numerical renormalization group. Here, many body effects yield a dissipation whose peak value is now proportional to $T_K |\log T|$ so long as $T\sim T_K$, followed for $T\sim Γ$ by a second high temperature regime where dissipation is proportional to $Γ|\log T|$. The detectability of Kondo mechanical dissipation in atomic force microscopy is discussed.

cond-mat.str-el↗

arXiv2017

Quantum Lubricity

The quantum motion of nuclei, generally ignored in sliding friction, can become important for an atom, ion, or light molecule sliding in an optical lattice. The density-matrix-calculated evolution of a quantum Prandtl-Tomlinson model, describing the frictional dragging by an external force of a quantum particle, shows that classical predictions can be very wrong. The strongest quantum effect occurs not for weak, but for strong periodic potentials, where barriers are high but energy levels in each well are discrete, and resonant tunnelling to excited states in the nearest well can preempt classical stick-slip with great efficiency. The resulting permeation of otherwise impassable barriers is predicted to cause quantum lubricity

cond-mat.mes-hall↗

arXiv2017

Graphene nanoribbons on gold: Understanding superlubricity and edge effects

We address the atomistic nature of the longitudinal static friction against sliding of graphene nanoribbons (GNRs) deposited on gold, a system whose structural and mechanical properties have been recently the subject of intense experimental investigation. By means of numerical simulations and modeling we show that the GNR interior is structurally lubric ("superlubric") so that the static friction is dominated by the front/tail regions of the GNR, where the residual uncompensated lateral forces arising from the interaction with the underneath gold surface opposes the free sliding. As a result of this edge pinning the static friction does not grow with the GNR length, but oscillates around a fairly constant mean value. These friction oscillations are explained in terms of the GNR-Au(111) lattice mismatch: at certain GNR lengths close to an integer number of the beat (or moire') length there is good force compensation and superlubric sliding; whereas close to half odd-integer periods there is significant pinning of the edge with larger friction. These results make qualitative contact with recent state-of-the-art atomic force microscopy experiment, as well as with the sliding of other different incommensurate systems.

cond-mat.mes-hall↗

arXiv2017

Graphene on h-BN: to align or not to align?

The contact strength, adhesion and friction, between graphene and an incommensurate crystalline substrate such as {\it h}-BN depends on their relative alignment angle $θ$. The well established Novaco-McTague (NM) theory predicts for a monolayer graphene on a hard bulk {\it h}-BN crystal face a small spontaneous misalignment, here $θ_{NM}$\,$\simeq$\,0.45 degrees which if realized would be relevant to a host of electronic properties besides the mechanical ones. Because experimental equilibrium is hard to achieve, we inquire theoretically about alignment or misalignment by simulations based on dependable state-of-the-art interatomic force fields. Surprisingly at first, we find compelling evidence for $θ= 0$, i.e., full energy-driven alignment in the equilibrium state of graphene on {\it h}-BN. Two factors drive this deviation from NM theory. First, graphene is not flat, developing on {\it h}-BN a long-wavelength out-of-plane corrugation. Second, {\it h}-BN is not hard, releasing its contact stress by planar contractions/expansions that accompany the interface moiré structure. Repeated simulations by artificially forcing graphene to keep flat, and {\it h}-BN to keep rigid, indeed yield an equilibrium misalignment similar to $θ_{NM}$ as expected. Subsequent sliding simulations show that friction of graphene on {\it h}-BN, small and essentially independent of misalignments in the artificial frozen state, strongly increases in the more realistic corrugated, strain-modulated, aligned state.

cond-mat.mtrl-sci↗

arXiv2017

Finite-temperature phase diagram and critical point of the Aubry pinned-sliding transition in a 2D monolayer

The Aubry unpinned--pinned transition in the sliding of two incommensurate lattices occurs for increasing mutual interaction strength in one dimension ($1D$) and is of second order at $T=0$, turning into a crossover at nonzero temperatures. Yet, real incommensurate lattices come into contact in two dimensions ($2D$), at finite temperature, generally developing a mutual Novaco-McTague misalignment, conditions in which the existence of a sharp transition is not clear. Using a model inspired by colloid monolayers in an optical lattice as a test $2D$ case, simulations show a sharp Aubry transition between an unpinned and a pinned phase as a function of corrugation. Unlike $1D$, the $2D$ transition is now of first order, and, importantly, remains well defined at $T>0$. It is heavily structural, with a local rotation of moiré pattern domains from the nonzero initial Novaco-McTague equilibrium angle to nearly zero. In the temperature ($T$) -- corrugation strength ($W_0$) plane, the thermodynamical coexistence line between the unpinned and the pinned phases is strongly oblique, showing that the former has the largest entropy. This first-order Aubry line terminates with a novel critical point $T=T_c$, marked by a susceptibility peak. The expected static sliding friction upswing between the unpinned and the pinned phase decreases and disappears upon heating from $T=0$ to $T=T_c$. The experimental pursuit of this novel scenario is proposed.

cond-mat.mes-hall↗

arXiv2017

Two-Band $s_\pm$ Strongly Correlated Superconductivity in K$_3$ p-Terphenyl?

A new organic superconductor, possibly with formula $K_3$ p-terphenyl, has been discovered by Wang, Gao, Huang and Chen, reaching a very high $T_c$ of about 120~K. Besides a clear diamagnetic signal, most other details such as stoichiometry and structure are yet unknown. However, pristine p-terphenyl has a familiar $P2_1/a$ staggered bimolecular structure, and it can be reasonably assumed that a similar bimolecular structure could be retained by hypothetical $K_3$ p-terphenyl. We point out that the resulting 2-narrow band metal would support the same $s_{\pm}$ superconductivity recently proposed for doped polycyclic aromatic hydrocarbons such as La-phenanthrene or $K_3$-picene. In that model, narrow bands, a large Hubbard $U$ and the neighbourhood of a Mott transition enhance superconductivity rather than damaging it.

cond-mat.supr-con↗

arXiv2017

Cooling quasiparticles in A$_3$C$_{60}$ fullerides by excitonic mid-infrared absorption

Long after its discovery superconductivity in alkali fullerides A$_3$C$_{60}$ still challenges conventional wisdom. The freshest inroad in such ever-surprising physics is the behaviour under intense infrared (IR) excitation. Signatures attributable to a transient superconducting state extending up to temperatures ten times higher than the equilibrium $T_c\sim$ 20 K have been discovered in K$_3$C$_{60}$ after ultra-short pulsed IR irradiation -- an effect which still appears as remarkable as mysterious. Motivated by the observation that the phenomenon is observed in a broad pumping frequency range that coincides with the mid-infrared electronic absorption peak still of unclear origin, rather than to TO phonons as has been proposed, we advance here a radically new mechanism. First, we argue that this broad absorption peak represents a "super-exciton" involving the promotion of one electron from the $t_{1u}$ half-filled state to a higher-energy empty $t_{1g}$ state, dramatically lowered in energy by the large dipole-dipole interaction acting in conjunction with Jahn Teller effect within the enormously degenerate manifold of $\big(t_{1u}\big)^2\big(t_{1g}\big)^1$ states. Both long-lived and entropy-rich because they are triplets, the IR-induced excitons act as a sort of cooling mechanism that permits transient superconductive signals to persist up to much larger temperatures.

cond-mat.str-el↗

arXiv2017

High-pressure phase diagram, structural transitions, and persistent non-metallicity of BaBiO$_3$: theory and experiment

BaBiO$_3$ is a mixed-valence perovskite which escapes the metallic state through a Bi valence (and Bi-O bond) disproportionation or CDW distortion, resulting in a semiconductor with a gap of 0.8 eV at zero pressure. The evolution of structural and electronic properties at high pressure is, however, largely unknown. Pressure, one might have hoped, could reduce the disproportionation, making the two Bi ions equivalent and bringing the system closer to metallicity or even to superconductivity, such as is attained at ambient pressure upon metal doping. We address the high-pressure phase diagram of pristine BaBiO$_3$ by ab initio DFT calculations based on GGA and hybrid functionals in combination with crystal structure prediction methods based on evolutionary algorithms, molecular dynamics and metadynamics. The calculated phase diagram from 0 to 50 GPa indicates that pristine BaBiO$_3$ resists metallization under pressure, undergoing instead at room temperature structural phase transitions from monoclinic \textit{I2/m} to nearly tetragonal \textit{P-1} at 7 GPa, possibly to monoclinic \textit{C2/m} at 27 GPa, and to triclinic \textit{P1} at 43 GPa. Remarkably, all these phases sustain and in fact increase the inequivalence of two Bi neighboring sites and of their Bi-O bonds and, in all cases except semimetallic \textit{C2/m}, the associated insulating character. We then present high-pressure resistivity data which generally corroborate these results, and show that the insulating character persists at least up to 80 GPa, suggesting that the \textit{C2/m} phase is probably an artifact of the small computational cell.

cond-mat.mtrl-sci↗

arXiv2016

Nanoscale orbital excitations and the infrared spectrum of a molecular Mott insulator: A15-Cs$_{3}$C$_{60}$

The quantum physics of ions and electrons behind low-energy spectra of strongly correlated {\it molecular} conductors, superconductors and Mott insulators is poorly known, yet fascinating especially in orbitally degenerate cases. The fulleride insulator Cs$_{3}$C$_{60}$ (A15), one such system, exhibits infrared (IR) spectra with low temperature peak features and splittings suggestive of static Jahn-Teller distortions with breakdown of orbital symmetry in the molecular site. That is puzzling, for there is no detectable static distortion, and because the features and splittings disappear upon modest heating, which they should not. Taking advantage of the Mott-induced collapse of electronic wavefunctions from lattice-extended to nanoscale localized inside a caged molecular site, we show that unbroken spin and orbital symmetry of the ion multiplets explains the IR spectrum without adjustable parameters. This demonstrates the importance of a fully quantum treatment of nuclear positions and orbital momenta in the Mott insulator sites, dynamically but not statically distorted. The observed demise of these features with temperature is explained by the thermal population of a multiplet term whose nuclear positions are essentially undistorted, but whose energy is very low-lying. That term is in facts a scaled-down orbital excitation analogous to that of other Mott insulators, with the same spin $1/2$ as the ground state, but with a larger orbital moment of two instead of one.

cond-mat.supr-con↗

arXiv2016

Creating new layered structures at high pressures: SiS$_2$

Old and novel layered structures are attracting increasing attention for their physical, electronic, and frictional properties. SiS$_2$, isoelectronic to SiO$_2$, CO$_2$ and CS$_2$, is a material whose phases known experimentally up to 6 GPa exhibit 1D chain-like, 2D layered and 3D tetrahedral structures. We present highly predictive $ab$ $initio$ calculations combined with evolutionary structure search and molecular dynamics simulations of the structural and electronic evolution of SiS$_2$ up to 100 GPa. A highly stable CdI$_2$-type layered structure, which is octahedrally coordinated with space group $P\bar{3}m1$ surprisingly appears between 4 and up to at least 100 GPa. The tetrahedral-octahedral switch is naturally expected upon compression, unlike the layered character realized here by edge-sharing SiS$_6$ octahedral units connecting within but not among sheets. The predicted phase is semiconducting with an indirect band gap of about 2 eV at 10 GPa, decreasing under pressure until metallization around 40 GPa. The robustness of the layered phase suggests possible recovery at ambient pressure, where calculated phonon spectra indicate dynamical stability. Even a single monolayer is found to be dynamically stable in isolation, suggesting that it could possibly be sheared or exfoliated from bulk $P\bar{3}m1$-SiS$_2$.

physics.chem-ph↗

arXiv2016

Metallic, Magnetic and Molecular Nanocontacts

Scanning tunnelling microscopy and break-junction experiments realize metallic and molecular nanocontacts that act as ideal one-dimensional channels between macroscopic electrodes. Emergent nanoscale phenomena typical of these systems encompass structural, mechanical, electronic, transport, and magnetic properties. This Review focuses on the theoretical explanation of some of these properties obtained with the help of first-principles methods. By tracing parallel theoretical and experimental developments from the discovery of nanowire formation and conductance quantization in gold nanowires to recent observations of emergent magnetism and Kondo correlations, we exemplify the main concepts and ingredients needed to bring together ab initio calculations and physical observations. It can be anticipated that diode, sensor, spin-valve and spin-filter functionalities relevant for spintronics and molecular electronics applications will benefit from the physical understanding thus obtained.

cond-mat.mes-hall↗

arXiv2016

Pressure-induced gap closing and metallization of MoSe$_{2}$ and MoTe$_{2}$

Layered molybdenum dichalchogenides are semiconductors whose gap is controlled by delicate interlayer interactions. The gap tends to drop together with the interlayer distance, suggesting collapse and metallization under pressure. We predict, based on first principles calculations, that layered semiconductors 2H$_c$-MoSe$_2$ and 2H$_c$-MoTe$_2$ should undergo metallization at pressures between 28 and 40 GPa (MoSe$_2$) and 13 and 19 GPa (MoTe$_2$). Unlike MoS$_2$ where a 2H$_c$ $\to$ 2H$_a$ layer sliding transition is known to take place, these two materials appear to preserve the original 2H$_c$ layered structure at least up to 100 GPa and to increasingly resist lubric layer sliding under pressure. Similar to metallized MoS$_2$ they are predicted to exhibit a low density of states at the Fermi level, and presumably very modest superconducting temperatures if any. We also study the $β$-MoTe$_2$ structure, metastable with a higher enthalpy than 2H$_c$-MoTe$_2$. Despite its ready semimetallic and (weakly) superconducting character already at zero pressure, metallicity is not expected to increase dramatically with pressure.

cond-mat.mtrl-sci↗

arXiv2016

CDW slips and giant frictional dissipation peaks at the NbSe$_2$ surface

Accessing, controlling and understanding nanoscale friction and dissipation is a crucial issue in nanotechnology, where moving elements are central. Recently, ultra-sensitive noncontact pendulum Atomic Force Microscope (AFM) succeeded in detecting the electronic friction drop caused by the onset of superconductivity in Nb, raising hopes that a wider variety of mechanisms of mechanical dissipation arising from electron organization into different collective phenomena will become accessible through this unconventional surface probe. Among them, the driven phase dynamics of charge-density-waves (CDWs) represents an outstanding challenge as a source of dissipation. Here we report a striking multiplet of AFM dissipation peaks arising at nanometer distances above the surface of NbSe$_2$ - a layered compound exhibiting an incommensurate CDW. Each peak appears at a well defined tip-surface interaction force of the order of a nN, and persists until T=70K where CDW short-range order is known to disappear. A theoretical model is presented showing that the peaks are connected to tip-induced local 2$π$ CDW phase slips. Under the attractive potential of the approaching tip, the local CDW surface phase landscape deforms continuously until a series of 2$π$ jumps occur between different values of the local phase. As the tip oscillates to and fro, each slip gives rise to a hysteresis cycle, appearing at a selected distance, the dissipation corresponding to "pumping" in and out a local slip in the surface CDW phase of NbSe$_2$.

cond-mat.mes-hall↗

arXiv2016

Microscopic Friction Emulators

Cold ions sliding across periodic potential patterns formed by lasers elucidate the physics of dry friction between crystals. Experiments with no more than six ions suffice to explore a vast domain of frictional forces.

cond-mat.mes-hall↗

arXiv2016

Slider Thickness Promotes Lubricity: from 2D Islands to 3D Clusters

The sliding of three-dimensional clusters and two-dimensional islands adsorbed on crystal surfaces represent an important test case to understand friction. Even for the same material, monoatomic islands and thick clusters will not as a rule exhibit the same friction, but specific differences have not been explored. Through realistic molecular dynamics simulations of the static friction gold on graphite, an experimentally relevant system, we uncover as a function of gold thickness a progressive drop of static friction from monolayer islands, that are easily pinned, towards clusters, that slide more readily. The main ingredient contributing to this thickness-induced lubricity appears to be the increased effective rigidity of the atomic contact, acting to reduce the cluster interdigitation with the substrate. A second element which plays a role is lateral contact size, which can accommodate the solitons typical of the incommensurate interface only above a critical contact diameter, which is larger for monolayer islands than for thick clusters. The two effects concur to make clusters more lubric than islands, and large sizes more lubric than smaller ones. These conclusions are expected to be of broader applicability in diverse nanotribological systems, where the role played by static, and dynamic, friction is generally quite important.

cond-mat.mes-hall↗

arXiv2016

Non-equilibrium and non-homogeneous phenomena around a first-order quantum phase transition

We consider non-equilibrium phenomena in a very simple model that displays a zero-temperature first-order phase transition. The quantum Ising model with a four-spin exchange is adopted as a general representative of first-order quantum phase transitions that belong to the Ising universality class, such as for instance the order-disorder ferroelectric transitions, and possibly first-order T = 0 Mott transitions. In particular, we address quantum quenches in the exactly solvable limit of infinite connectivity and show that, within the coexistence region around the transition, the system can remain trapped in a metastable phase, as long as it is spatially homogeneous so that nucleation can be ignored. Motivated by the physics of nucleation, we then study in the same model static but inhomogeneous phenomena that take place at surfaces and interfaces. The first order nature implies that both phases remain locally stable across the transition, and with that the possibility of a metastable wetting layer showing up at the surface of the stable phase, even at T=0. We use mean-field theory plus quantum fluctuations in the harmonic approximation to study quantum surface wetting.

cond-mat.str-el↗

arXiv2015

Subharmonic Shapiro steps of sliding colloidal monolayers in optical lattices

We investigate theoretically the possibility to observe dynamical mode locking, in the form of Shapiro steps, when a time-periodic potential or force modulation is applied to a two-dimensional (2D) lattice of colloidal particles that are dragged by an external force over an optically generated periodic potential. Here we present realistic molecular dynamics simulations of a 2D experimental setup, where the colloid sliding is realized through the motion of soliton lines between locally commensurate patches or domains, and where the Shapiro steps are predicted and analyzed. Interestingly, the jump between one step and the next is seen to correspond to a fixed number of colloids jumping from one patch to the next, across the soliton line boundary, during each AC cycle. In addition to ordinary "integer" steps, coinciding here with the synchronous rigid advancement of the whole colloid monolayer, our main prediction is the existence of additional smaller "subharmonic" steps due to localized solitonic regions of incommensurate layers executing synchronized slips, while the majority of the colloids remains pinned to a potential minimum. The current availability and wide parameter tunability of colloid monolayers makes these predictions potentially easy to access in an experimentally rich 2D geometrical configuration.

cond-mat.mes-hall↗

arXiv2015

Electrical charging effects on the sliding friction of a model nano-confined ionic liquid

Recent measurements suggest the possibility to exploit ionic liquids (ILs) as smart lubricants for nano-contacts, tuning their tribological and rheological properties by charging the sliding interfaces. Following our earlier theoretical study of charging effects on nanoscale confinement and squeezout of a model IL, we present here molecular dynamics simulations of the frictional and lubrication properties of that model under charging conditions.First we describe the case when two equally charged plates slide while being held together to a confinement distance of a few molecular layers.The shear sliding stress is found to rise as the number of IL layers decreases stepwise. However the shear stress shows, within each given number of layers, only a weak dependence upon the precise value of the normal load, a result in agreement with data extracted from recent experiments.We subsequently describe the case of opposite charging of the sliding plates, and follow the shear stress when the charging is slowly and adiabatically reversed in the course of time, under fixed load. Despite the fixed load, the number and structure of the confined IL layers changes with changing charge, and that in turn drives strong friction variations. The latter involve first of all charging-induced freezing of the IL film, followed by a discharging-induced melting, both made possible by the nanoscale confinement. Another mechanism for charging-induced frictional changes is a shift of the plane of maximum shear from mid-film to the plate-film interface, and viceversa. While these occurrences and results invariably depend upon the parameters of the model IL and upon its specific interaction with the plates, the present study helps identifying a variety of possible behavior, obtained under very simple assumptions, while connecting it to an underlying equilibrium thermodynamics picture.

cond-mat.mtrl-sci↗