arXiv subjects

Eros Reato

Publications and source records attributed to Eros Reato.

4 recordsLinked to original sources

arXiv2024

Multiparameter admittance spectroscopy for investigating defects in MoS${_2}$ thin film MOSFETs

A method for assessing the quality of electronic material properties of thin-film metal oxide semiconductor field-effect transistors (MOSFETs) is presented. By investigating samples with MOCVD-grown MoS${_2}$ channels exposed to atmospheric conditions, the existence of electron traps in MoS${_2}$ and at the interface between the gate insulator and the thin-film MoS${_2}$ are revealed. Differential conductance and capacitance data of the transistor channels are plotted as 3D surfaces on a base plane spanned by the measurement frequency versus the gate voltage. The existence of defects is confirmed by comparison with ideal results from a theoretical model.

physics.app-ph↗

arXiv2024

CVD Graphene Contacts for Lateral Heterostructure MoS${_2}$ Field Effect Transistors

Intensive research is carried out on two-dimensional materials, in particular molybdenum disulfide, towards high-performance transistors for integrated circuits. Fabricating transistors with ohmic contacts is challenging due to the high Schottky barrier that severely limits the transistors' performance. Graphene-based heterostructures can be used in addition or as a substitute for unsuitable metals. We present lateral heterostructure transistors made of scalable chemical vapor-deposited molybdenum disulfide and chemical vapor-deposited graphene with low contact resistances of about 9 k$Ω$$μ$m and high on/off current ratios of 10${^8}$. We also present a theoretical model calibrated on our experiments showing further potential for scaling transistors and contact areas into the few nanometers range and the possibility of a strong performance enhancement by means of layer optimizations that would make transistors promising for use in future logic circuits.

cond-mat.mes-hall↗

arXiv2024

Button Shear Testing for Adhesion Measurements of 2D Materials

Two-dimensional (2D) materials are considered for numerous applications in microelectronics, although several challenges remain when integrating them into functional devices. Weak adhesion is one of them, caused by their chemical inertness. Quantifying the adhesion of 2D materials on three-dimensional surfaces is, therefore, an essential step toward reliable 2D device integration. To this end, button shear testing is proposed and demonstrated as a method for evaluating the adhesion of 2D materials with the examples of graphene and hexagonal boron nitride (hBN), molybdenum disulfide, and tungsten diselenide on silicon dioxide (SiO${_2}$) and silicon nitride substrates. We propose a fabrication process flow for polymer buttons on the 2D materials and establish suitable button dimensions and testing shear speeds. We show with our quantitative data that low substrate roughness and oxygen plasma treatments on the substrates before 2D material transfer result in higher shear strengths. Thermal annealing increases the adhesion of hBN on SiO${_2}$ and correlates with the thermal interface resistance between these materials. This establishes button shear testing as a reliable and repeatable method for quantifying adhesion of 2D materials.

physics.app-ph↗

arXiv2022

Zero Bias Power Detector Circuits based on MoS$_2$ Field Effect Transistors on Wafer-Scale Flexible Substrates

We demonstrate the design, fabrication, and characterization of wafer-scale, zero-bias power detectors based on two-dimensional MoS$_2$ field effect transistors (FETs). The MoS$_2$ FETs are fabricated using a wafer-scale process on 8 $μ$m thick polyimide film, which in principle serves as flexible substrate. The performances of two CVD-MoS$_2$ sheets, grown with different processes and showing different thicknesses, are analyzed and compared from the single device fabrication and characterization steps to the circuit level. The power detector prototypes exploit the nonlinearity of the transistors above the cut-off frequency of the devices. The proposed detectors are designed employing a transistor model based on measurement results. The fabricated circuits operate in Ku-band between 12 and 18 GHz, with a demonstrated voltage responsivity of 45 V/W at 18 GHz in the case of monolayer MoS2 and 104 V/W at 16 GHz in the case of multilayer MoS$_2$, both achieved without applied DC bias. They are the best performing power detectors fabricated on flexible substrate reported to date. The measured dynamic range exceeds 30 dB outperforming other semiconductor technologies like silicon complementary metal oxide semiconductor (CMOS) circuits and GaAs Schottky diodes.

physics.app-ph↗