arXiv subjects

Etienne Burdet

Publications and source records attributed to Etienne Burdet.

At least 19 recordsLinked to original sources

arXiv2026

How haptic feedback enables human group synchronization

Synchronization often emerges spontaneously among interacting people, yielding practical benefits for tasks such as sports, physical rehabilitation, and collaborative manufacturing, and fostering a sense of unity and trust. Although visual interaction is typically considered the primary channel for achieving synchronization, it is constrained by sensorimotor delays, occlusions, and limited attentional resources. Here, we tested whether haptic communication can induce or enhance synchronization in a group motor task. Six quartets performed oscillatory wrist flexion/extension while being connected via virtual elastic bands; we compared haptic only, visual only, combined haptic\&visual, and no feedback conditions. Even weak haptic coupling induced group synchronization, and combining haptic with visual feedback yielded higher and more stable synchronization than either modality alone. Haptic feedback also increased the frequency at which groups coordinated, and movement smoothness rose with frequency. These findings lay the groundwork for designing haptic interaction protocols for collaborative group environments.

eess.SY↗

arXiv2026

Intention assimilation control for accurate tracking with variable impedance in teleoperation

Robot systems for teleoperation commonly use a spring-like force pulling the follower robot towards the leader's position to track their movements. With this control strategy, the tracking accuracy deteriorates when the follower' stiffness is low, but high stiffness poses a danger to objects or people in the follower robot's environment. To address this trade-off between tracking accuracy and safety, we propose an alternative intention assimilation control (IAC) strategy where the robot's tracking accuracy can be ensured without high stiffness. Different from traditional approaches, which transmit the leader's current position to the follower, this new controller estimates the leader's target position and transmits it to the follower. With this strategy, the follower impedance can be changed on-the-fly to continuously reflect the user's desired impedance or modulated automatically to fulfill the task requirements. Our controller was validated on two 7 degree-of-freedom manipulators, yielding high tracking accuracy with varying impedance. Four experiments were conducted to compare {teleoperation} with IAC to tele-impedance control (TIC) during free tracking, interaction with a balloon, during peg insertion, and table polishing with force feedback. The results show that IAC increases tracking accuracy, improves task completion rate and reduces completion time. IAC enables the robot to accurately replicate the user's movement while giving them freedom to modulate the impedance according to their intention, providing an unprecedented level of control of the follower's position and its impedance during unilateral and bilateral teleoperation.

cs.RO↗

arXiv2026

Cross-Modal Visuo-Tactile Object Perception

Estimating physical properties is critical for safe and efficient autonomous robotic manipulation, particularly during contact-rich interactions. In such settings, vision and tactile sensing provide complementary information about object geometry, pose, inertia, stiffness, and contact dynamics, such as stick-slip behavior. However, these properties are only indirectly observable and cannot always be modeled precisely (e.g., deformation in non-rigid objects coupled with nonlinear contact friction), making the estimation problem inherently complex and requiring sustained exploitation of visuo-tactile sensory information during action. Existing visuo-tactile perception frameworks have primarily emphasized forceful sensor fusion or static cross-modal alignment, with limited consideration of how uncertainty and beliefs about object properties evolve over time. Inspired by human multi-sensory perception and active inference, we propose the Cross-Modal Latent Filter (CMLF) to learn a structured, causal latent state-space of physical object properties. CMLF supports bidirectional transfer of cross-modal priors between vision and touch and integrates sensory evidence through a Bayesian inference process that evolves over time. Real-world robotic experiments demonstrate that CMLF improves the efficiency and robustness of latent physical properties estimation under uncertainty compared to baseline approaches. Beyond performance gains, the model exhibits perceptual coupling phenomena analogous to those observed in humans, including susceptibility to cross-modal illusions and similar trajectories in learning cross-sensory associations. Together, these results constitutes a significant step toward generalizable, robust and physically consistent cross-modal integration for robotic multi-sensory perception.

cs.RO↗

arXiv2026

Adaptive Manipulation Potential and Haptic Estimation for Tool-Mediated Interaction

Achieving human-level dexterity in contact-rich, tool-mediated manipulation remains a significant challenge due to visual occlusion and the underdetermined nature of haptic sensing. This paper introduces a parameterized Equilibrium Manifold (EM) as a unified representation for tool-mediated interaction, and develops a closed-loop framework that integrates haptic estimation, online planning, and adaptive stiffness control. We establish a physical-geometric duality using an adaptive manipulation potential incorporating a differentiable contact model, which induces the manifold's geometric structure and ensures that complex physical interactions are encapsulated as continuous operations on the EM. Within this framework, we reformulate haptic estimation as a manifold parameter estimation problem. Specifically, a hybrid inference strategy (haptic SLAM) is employed in which discrete object shapes are classified via particle filtering, while the continuous object pose is estimated using analytical gradients for efficient optimization. By continuously updating the parameters of the manipulation potential, the framework dynamically reshapes the induced EM to guide online trajectory replanning and implement uncertainty-aware impedance control, thereby closing the perception-action loop. The system is validated through simulation and over 260 real-world screw-loosening trials. Experimental results demonstrate robust identification and manipulation success in standard scenarios while maintaining accurate tracking. Furthermore, ablation studies confirm that haptic SLAM and uncertainty-aware stiffness modulation outperform fixed impedance baselines, effectively preventing jamming during tight tolerance interactions.

cs.RO↗

arXiv2026

Augmenting Human Balance with Generic Supernumerary Robotic Limbs

Supernumerary robotic limbs (SLs) have the potential to transform a wide range of human activities, yet their usability remains limited by key technical challenges, particularly in ensuring safety and achieving versatile control. Here, we address the critical problem of maintaining balance in the human-SLs system, a prerequisite for safe and comfortable augmentation tasks. Unlike previous approaches that developed SLs specifically for stability support, we propose a general framework for preserving balance with SLs designed for generic use. Our hierarchical three-layer architecture consists of: (i) a prediction layer that estimates human trunk and center of mass (CoM) dynamics, (ii) a planning layer that generates optimal CoM trajectories to counteract trunk movements and computes the corresponding SL control inputs, and (iii) a control layer that executes these inputs on the SL hardware. We evaluated the framework with ten participants performing forward and lateral bending tasks. The results show a clear reduction in stance instability, demonstrating the framework's effectiveness in enhancing balance. This work paves the path towards safe and versatile human-SLs interactions. [This paper has been submitted for publication to IEEE.]

cs.RO↗

arXiv2026

Model selection and real-time skill assessment for suturing in robotic surgery

Automated feedback systems have the potential to provide objective skill assessment for training and evaluation in robot-assisted surgery. In this study, we examine methods to achieve real-time prediction of surgical skill level in real-time based on Objective Structured Assessment of Technical Skills (OSATS) scores. Using data acquired from the da Vinci Surgical System, we carry out three main analyses, focusing on model design, their real-time performance, and their skill-level-based cross-validation training. For the model design, we evaluate the effectiveness of multimodal deep learning models for predicting surgical skill levels using synchronized kinematic and vision data. Our models include separate unimodal baselines and fusion architectures that integrate features from both modalities and are evaluated using mean Spearman's correlation coefficients, demonstrating that the fusion model consistently outperforms unimodal models for real-time predictions. For the real-time performance, we observe the prediction's trend over time and highlight correlation with the surgeon's gestures. For the skill-level-based cross-validation, we separately trained models on surgeons with different skill levels, which showed that high-skill demonstrations allow for better performance than those trained on low-skilled ones and generalize well to similarly skilled participants. Our findings show that multimodal learning allows more stable fine-grained evaluation of surgical performance and highlights the value of expert-level training data for model generalization.

cs.RO↗

arXiv2025

Embodied Tactile Perception of Soft Objects Properties

To enable robots to develop human-like fine manipulation, it is essential to understand how mechanical compliance, multi-modal sensing, and purposeful interaction jointly shape tactile perception. In this study, we use a dedicated modular e-Skin with tunable mechanical compliance and multi-modal sensing (normal, shear forces and vibrations) to systematically investigate how sensing embodiment and interaction strategies influence robotic perception of objects. Leveraging a curated set of soft wave objects with controlled viscoelastic and surface properties, we explore a rich set of palpation primitives-pressing, precession, sliding that vary indentation depth, frequency, and directionality. In addition, we propose the latent filter, an unsupervised, action-conditioned deep state-space model of the sophisticated interaction dynamics and infer causal mechanical properties into a structured latent space. This provides generalizable and in-depth interpretable representation of how embodiment and interaction determine and influence perception. Our investigation demonstrates that multi-modal sensing outperforms uni-modal sensing. It highlights a nuanced interaction between the environment and mechanical properties of e-Skin, which should be examined alongside the interaction by incorporating temporal dynamics.

cs.RO↗

arXiv2025

Peripheral brain interfacing: Reading high-frequency brain signals from the output of the nervous system

Accurate and robust recording and decoding from the central nervous system (CNS) is essential for advances in human-machine interfacing. However, technologies used to directly measure CNS activity are limited by their resolution, sensitivity to interferences, and invasiveness. Advances in muscle recordings and deep learning allow us to decode the spiking activity of spinal motor neurons (MNs) in real time and with high accuracy. MNs represent the motor output layer of the CNS, receiving and sampling signals originating in different regions in the nervous system, and generating the neural commands that control muscles. The input signals to MNs can be estimated from the MN outputs. Here we argue that peripheral neural interfaces using muscle sensors represent a promising, non-invasive approach to estimate some neural activity from the CNS that reaches the MNs but does not directly modulate force production. We also discuss the evidence supporting this concept, and the necessary advances to consolidate and test MN-based CNS interfaces in controlled and real-world settings.

q-bio.NC↗

arXiv2025

Confidence-based Intent Prediction for Teleoperation in Bimanual Robotic Suturing

Robotic-assisted procedures offer enhanced precision, but while fully autonomous systems are limited in task knowledge, difficulties in modeling unstructured environments, and generalisation abilities, fully manual teleoperated systems also face challenges such as delay, stability, and reduced sensory information. To address these, we developed an interactive control strategy that assists the human operator by predicting their motion plan at both high and low levels. At the high level, a surgeme recognition system is employed through a Transformer-based real-time gesture classification model to dynamically adapt to the operator's actions, while at the low level, a Confidence-based Intention Assimilation Controller adjusts robot actions based on user intent and shared control paradigms. The system is built around a robotic suturing task, supported by sensors that capture the kinematics of the robot and task dynamics. Experiments across users with varying skill levels demonstrated the effectiveness of the proposed approach, showing statistically significant improvements in task completion time and user satisfaction compared to traditional teleoperation.

cs.RO↗

arXiv2025

Design and Preliminary Evaluation of a Torso Stabiliser for Individuals with Spinal Cord Injury

Spinal cord injuries generally result in sensory and mobility impairments, with torso instability being particularly debilitating. Existing torso stabilisers are often rigid and restrictive. We present an early investigation into a non-restrictive 1 degree-of-freedom (DoF) mechanical torso stabiliser inspired by devices such as centrifugal clutches and seat-belt mechanisms. First, the paper presents a motion-capture (MoCap) and OpenSim-based kinematic analysis of the cable-based system to understand the requisite device characteristics. The evaluation in simulation resulted in the cable-based device to require 55-60\,cm of unrestricted travel, and to lock at a threshold cable velocity of 80-100\,cm/s. Next, the developed 1-DoF device is introduced. The proposed mechanical device is transparent during activities of daily living, and transitions to compliant blocking when incipient fall is detected. Prototype behaviour was then validated using a MoCap-based kinematic analysis to verify non-restrictive movement, reliable transition to blocking, and compliance of the blocking.

cs.RO↗

arXiv2025

Switch-based Independent Antagonist Actuation with a Single Motor for a Soft Exosuit

The use of a cable-driven soft exosuit poses challenges with regards to the mechanical design of the actuation system, particularly when used for actuation along multiple degrees of freedom (DoF). The simplest general solution requires the use of two actuators to be capable of inducing movement along one DoF. However, this solution is not practical for the development of multi-joint exosuits. Reducing the number of actuators is a critical need in multi-DoF exosuits. We propose a switch-based mechanism to control an antagonist pair of cables such that it can actuate along any cable path geometry. The results showed that 298.24ms was needed for switching between cables. While this latency is relatively large, it can reduced in the future by a better choice of the motor used for actuation.

cs.RO↗

arXiv2025

Space Physiology and Technology: Musculoskeletal Adaptations, Countermeasures, and Opportunities for Wearable Systems

Space poses significant challenges for humans, leading to physiological adaptations in response to an environment vastly different from Earth. A comprehensive understanding of these physiological adaptations is needed to devise effective countermeasures to support human life in space. This narrative review first focuses on the impact of the environment in space on the musculoskeletal system. It highlights the complex interplay between bone and muscle adaptations and their implications on astronaut health. Despite advances in current countermeasures, such as resistive exercise and pharmacological interventions, they remain partially effective, bulky, and resource-intensive, posing challenges for future missions aboard compact spacecraft. This review proposes wearable sensing and robotic technology as a promising alternative to overcome these limitations. Wearable systems, such as sensor-integrated suits and (soft) exoskeletons, can provide real-time monitoring, dynamic loading, and exercise protocols tailored to individual needs. These systems are lightweight, modular, and capable of operating in confined environments, making them ideal for long-duration missions. In addition to space applications, wearable technologies hold significant promise for terrestrial uses, supporting rehabilitation and assistance for the ageing population, individuals with musculoskeletal disorders, and enhance physical performance in healthy users. By integrating advanced materials, sensors and actuators, and intelligent and energy-efficient control, these technologies can bridge gaps in current countermeasures while offering broader applications on Earth.

cs.RO↗

arXiv2024

Predictive Visuo-Tactile Interactive Perception Framework for Object Properties Inference

Interactive exploration of the unknown physical properties of objects such as stiffness, mass, center of mass, friction coefficient, and shape is crucial for autonomous robotic systems operating continuously in unstructured environments. Precise identification of these properties is essential to manipulate objects in a stable and controlled way, and is also required to anticipate the outcomes of (prehensile or non-prehensile) manipulation actions such as pushing, pulling, lifting, etc. Our study focuses on autonomously inferring the physical properties of a diverse set of various homogeneous, heterogeneous, and articulated objects utilizing a robotic system equipped with vision and tactile sensors. We propose a novel predictive perception framework for identifying object properties of the diverse objects by leveraging versatile exploratory actions: non-prehensile pushing and prehensile pulling. As part of the framework, we propose a novel active shape perception to seamlessly initiate exploration. Our innovative dual differentiable filtering with Graph Neural Networks learns the object-robot interaction and performs consistent inference of indirectly observable time-invariant object properties. In addition, we formulate a $N$-step information gain approach to actively select the most informative actions for efficient learning and inference. Extensive real-robot experiments with planar objects show that our predictive perception framework results in better performance than the state-of-the-art baseline and demonstrate our framework in three major applications for i) object tracking, ii) goal-driven task, and iii) change in environment detection.

cs.RO↗

arXiv2024

Interacting humans and robots can improve sensory prediction by adapting their viscoelasticity

To manipulate objects or dance together, humans and robots exchange energy and haptic information. While the exchange of energy in human-robot interaction has been extensively investigated, the underlying exchange of haptic information is not well understood. Here, we develop a computational model of the mechanical and sensory interactions between agents that can tune their viscoelasticity while considering their sensory and motor noise. The resulting stochastic-optimal-information-and-effort (SOIE) controller predicts how the exchange of haptic information and the performance can be improved by adjusting viscoelasticity. This controller was first implemented on a robot-robot experiment with a tracking task which showed its superior performance when compared to either stiff or compliant control. Importantly, the optimal controller also predicts how connected humans alter their muscle activation to improve haptic communication, with differentiated viscoelasticity adjustment to their own sensing noise and haptic perturbations. A human-robot experiment then illustrated the applicability of this optimal control strategy for robots, yielding improved tracking performance and effective haptic communication as the robot adjusted its viscoelasticity according to its own and the user's noise characteristics. The proposed SOIE controller may thus be used to improve haptic communication and collaboration of humans and robots.

cs.RO↗

arXiv2024

Human Impedance Modulation to Improve Visuo-Haptic Perception

Humans activate muscles to shape the mechanical interaction with their environment, but can they harness this control mechanism to best sense the environment? We investigated how participants adapt their muscle activation to visual and haptic information when tracking a randomly moving target with a robotic interface. The results exhibit a differentiated effect of these sensory modalities, where participants' muscle cocontraction increases with the haptic noise and decreases with the visual noise, in apparent contradiction to previous results. These results can be explained, and reconciled with previous findings, when considering muscle spring like mechanics, where stiffness increases with cocontraction to regulate motion guidance. Increasing cocontraction to more closely follow the motion plan favors accurate visual over haptic information, while decreasing it avoids injecting visual noise and relies on accurate haptic information. We formulated this active sensing mechanism as the optimization of visuo-haptic information and effort. This OIE model can explain the adaptation of muscle activity to unimodal and multimodal sensory information when interacting with fixed or dynamic environments, or with another human, and can be used to optimize human-robot interaction.

cs.HC↗

arXiv2024

Haptic feedback of front car motion can improve driving control

This study investigates the role of haptic feedback in a car-following scenario, where information about the motion of the front vehicle is provided through a virtual elastic connection with it. Using a robotic interface in a simulated driving environment, we examined the impact of varying levels of such haptic feedback on the driver's ability to follow the road while avoiding obstacles. The results of an experiment with 15 subjects indicate that haptic feedback from the front car's motion can significantly improve driving control (i.e., reduce motion jerk and deviation from the road) and reduce mental load (evaluated via questionnaire). This suggests that haptic communication, as observed between physically interacting humans, can be leveraged to improve safety and efficiency in automated driving systems, warranting further testing in real driving scenarios.

cs.RO↗

arXiv2024

Visuo-Tactile based Predictive Cross Modal Perception for Object Exploration in Robotics

Autonomously exploring the unknown physical properties of novel objects such as stiffness, mass, center of mass, friction coefficient, and shape is crucial for autonomous robotic systems operating continuously in unstructured environments. We introduce a novel visuo-tactile based predictive cross-modal perception framework where initial visual observations (shape) aid in obtaining an initial prior over the object properties (mass). The initial prior improves the efficiency of the object property estimation, which is autonomously inferred via interactive non-prehensile pushing and using a dual filtering approach. The inferred properties are then used to enhance the predictive capability of the cross-modal function efficiently by using a human-inspired `surprise' formulation. We evaluated our proposed framework in the real-robotic scenario, demonstrating superior performance.

cs.RO↗

arXiv2024

Design, Fabrication and Evaluation of a Stretchable High-Density Electromyography Array

The adoption of high-density electrode systems for human-machine interfaces in real-life applications has been impeded by practical and technical challenges, including noise interference, motion artifacts and the lack of compact electrode interfaces. To overcome some of these challenges, we introduce a wearable and stretchable electromyography (EMG) array, and present its design, fabrication methodology, characterisation, and comprehensive evaluation. Our proposed solution comprises dry-electrodes on flexible printed circuit board (PCB) substrates, eliminating the need for time-consuming skin preparation. The proposed fabrication method allows the manufacturing of stretchable sleeves, with consistent and standardised coverage across subjects. We thoroughly tested our developed prototype, evaluating its potential for application in both research and real-world environments. The results of our study showed that the developed stretchable array matches or outperforms traditional EMG grids and holds promise in furthering the real-world translation of high-density EMG for human-machine interfaces.

cs.RO↗