arXiv subjects

Fèlix Casanova

Publications and source records attributed to Fèlix Casanova.

At least 73 records · Page 4Linked to original sources

arXiv2021

Paramagnetic spin Hall magnetoresistance

Spin Hall magnetoresistance (SMR) refers to a resistance change in a metallic film reflecting the magnetization direction of a magnet attached to the film. The mechanism of this phenomenon is spin exchange between conduction-electron spins and magnetization at the interface. SMR has been used to read out information written in a small magnet and to detect magnetization dynamics, but it has been limited to magnets; magnetic ordered phases or instability of magnetic phase transition has been believed to be indispensable. Here, we report the observation of SMR in a paramagnetic insulator Gd$_{3}$Ga$_{5}$O$_{12}$ (GGG) without spontaneous magnetization combined with a Pt film. The paramagnetic SMR can be attributed to spin-transfer torque acting on localized spins in GGG. We determine the efficiencies of spin torque and spin-flip scattering at the Pt/GGG interface, and demonstrate these quantities can be tuned with external magnetic fields. The results clarify the mechanism of spin-transport at a metal/paramagnetic insulator interface, which gives new insight into the spintronic manipulation of spin states in paramagnetic systems.

cond-mat.mtrl-sci↗

arXiv2021

Electrical control of valley-Zeeman spin-orbit coupling-induced spin precession at room temperature

The ultimate goal of spintronics is achieving electrically controlled coherent manipulation of the electron spin at room temperature to enable devices such as spin field-effect transistors. With conventional materials, coherent spin precession has been observed in the ballistic regime and at low temperatures only. However, the strong spin anisotropy and the valley character of the electronic states in 2D materials provide unique control knobs to manipulate spin precession. Here, by manipulating the anisotropic spin-orbit coupling in bilayer graphene by the proximity effect to WSe$_2$, we achieve coherent spin precession in the absence of an external magnetic field, even in the diffusive regime. Remarkably, the sign of the precessing spin polarization can be tuned by a back gate voltage and by a drift current. Our realization of a spin field-effect transistor at room temperature is a cornerstone for the implementation of energy-efficient spin-based logic.

cond-mat.mes-hall↗

arXiv2021

Disentangling spin, anomalous and planar Hall effects in ferromagnetic/heavy metal nanostructures

Ferromagnetic (FM)/heavy metal (HM) nanostructures can be used for the magnetic state readout in the proposed magneto-electric spin-orbit logic by locally injecting a spin-polarized current and measure the spin-to-charge conversion via the spin Hall effect. However, this local configuration is prone to spurious signals. In this work, we address spurious Hall effects that can contaminate the spin Hall signal in these FM/HM T-shaped nanostructures. The most pronounced Hall effects in our Co50Fe50/Pt nanostructures are the planar Hall effect and the anomalous Hall effect generated in the FM nanowire. We find that the planar Hall effect, induced by misalignment between magnetization and current direction in the FM wire, is manifested as a shift in the measured baseline resistance, but does not alter the spin Hall signal. In contrast, the anomalous Hall effect, arising from the charge current distribution within the FM, adds to the spin Hall signal. However, the effect can be made insignificant by minimizing the shunting effect via proper design of the device. We conclude that local spin injection in FM/HM nanostructures is a suitable tool for measuring spin Hall signals and, therefore, a valid method for magnetic state readout in prospective spin-based logic.

cond-mat.mes-hall↗

arXiv2020

Tailoring Superconductivity in Large-Area Single-Layer NbSe2 via Self-Assembled Molecular Adlayers

Two-dimensional transition metal dichalcogenides (TMDs) represent an ideal testbench for the search of materials by design, because their optoelectronic properties can be manipulated through surface engineering and molecular functionalization. However, the impact of molecules on intrinsic physical properties of TMDs, such as superconductivity, remains largely unexplored. In this work, the critical temperature (TC) of large-area NbSe2 monolayers is manipulated, employing ultrathin molecular adlayers. Spectroscopic evidence indicates that aligned molecular dipoles within the self-assembled layers act as a fixed gate terminal, collectively generating a macroscopic electrostatic field on NbSe2. This results in an \sim 55\% increase and a 70\% decrease in TC depending on the electric field polarity, which is controlled via molecular selection. The reported functionalization, which improves the air stability of NbSe2, is efficient, practical, up-scalable, and suited to functionalize large-area TMDs. Our results indicate the potential of hybrid 2D materials as a novel platform for tunable superconductivity.

cond-mat.supr-con↗

arXiv2020

Strong interfacial exchange field in a heavy metal/ferromagnetic insulator system determined by spin Hall magnetoresistance

Spin-dependent transport at heavy metal/magnetic insulator interfaces is at the origin of many phenomena at the forefront of spintronics research. A proper quantification of the different interfacial spin conductances is crucial for many applications. Here, we report the first measurement of the spin Hall magnetoresistance (SMR) of Pt on a purely ferromagnetic insulator (EuS). We perform SMR measurements in a wide range of temperatures and fit the results by using a microscopic model. From this fitting procedure we obtain the temperature dependence of the spin conductances ($G_s$, $G_r$ and $G_i$), disentangling the contribution of field-like torque ($G_i$), damping-like torque ($G_r$), and spin-flip scattering ($G_s$). An interfacial exchange field of the order of 1 meV acting upon the conduction electrons of Pt can be estimated from $G_i$, which is at least three times larger than $G_r$ below the Curie temperature. Our work provides an easy method to quantify this interfacial spin-splitting field, which play a key role in emerging fields such as superconducting spintronics and caloritronics, and topological quantum computation.

cond-mat.mes-hall↗

arXiv2020

Quantification of interfacial spin-charge conversion in metal/insulator hybrid structures by generalized boundary conditions

We present and verify experimentally a universal theoretical framework for the description of spin-charge interconversion in non-magnetic metal/insulator structures with interfacial spin-orbit coupling (ISOC). Our formulation is based on drift-diffusion equations supplemented with generalized boundary conditions. The latter encode the effects of ISOC and relate the electronic transport in such systems to spin loss and spin-charge interconversion at the interface, which are parameterized, respectively, by $G_{\parallel/\perp}$ and $σ_{\rm{sc/cs}}$. We demonstrate that the conversion efficiency depends solely on these interfacial parameters. We apply our formalism to two typical spintronic devices that exploit ISOC: a lateral spin valve and a multilayer Hall bar, for which we calculate the non-local resistance and the spin Hall magnetoresistance, respectively. Finally, we perform measurements on these two devices with a BiO$_x$/Cu interface and verify that transport properties related to the ISOC are quantified by the same set of interfacial parameters.

cond-mat.mes-hall↗

arXiv2020

Gate tunability of highly efficient spin-to-charge conversion by spin Hall effect in graphene proximitized with WSe$_2$

The proximity effect opens ways to transfer properties from one material into another and is especially important in two-dimensional materials. In van der Waals heterostructures, transition metal dichalcogenides (TMD) can be used to enhance the spin-orbit coupling of graphene leading to the prediction of gate controllable spin-to-charge conversion (SCC). Here, we report for the first time and quantify the SHE in graphene proximitized with WSe$_2$ up to room temperature. Unlike in other graphene/TMD devices, the sole SCC mechanism is the spin Hall effect and no Rashba-Edelstein effect is observed. Importantly, we are able to control the SCC by applying a gate voltage. The SCC shows a high efficiency, measured with an unprecedented SCC length larger than 20 nm. These results show the capability of two-dimensional materials to advance towards the implementation of novel spin-based devices and future applications.

cond-mat.mes-hall↗

arXiv2020

Differences in the magnon diffusion length for electrically and thermally driven magnon currents in Y$_3$Fe$_5$O$_{12}$

Recent demonstration of efficient transport and manipulation of spin information by magnon currents have opened exciting prospects for processing information in devices. Magnon currents can be driven both electrically and thermally, even in magnetic insulators, by applying charge currents in an adjacent metal layer. Earlier reports in thin yttrium iron garnet (YIG) films suggested that the diffusion length of magnons is independent on the biasing method, but different values were obtained in thicker films. Here, we study the magnon diffusion length for electrically and thermally driven magnon currents in the linear regime in a 2-$μ$m-thick YIG film as a function of temperature and magnetic field. Our results show a decrease of the magnon diffusion length with magnetic field for both biasing methods and at all temperatures from 5 to 300 K, indicating that sub-thermal magnons dominate the long-range transport. Moreover, we demonstrate that the value of the magnon diffusion length depends on the driving mechanism, suggesting that different non-equilibrium magnon distributions are biased for each method. Finally, we demonstrate that the magnon diffusion length for thermally driven magnon currents is independent of the YIG thickness and material growth conditions, confirming that this quantity is an intrinsic parameter of YIG.

cond-mat.mes-hall↗

arXiv2020

Spin Hall Effect in Bilayer Graphene Combined with an Insulator up to Room Temperature

Spin-orbit coupling in graphene can be enhanced by chemical functionalization, adatom decoration or proximity with a van der Waals material. As it is expected that such enhancement gives rise to a sizeable spin Hall effect, a spin-to-charge current conversion phenomenon of technological relevance, it has sparked wide research interest. However, it has only been measured in graphene/transition metal dichalcogenide van der Waals heterostructures with limited scalability. Here, we experimentally demonstrate spin Hall effect up to room temperature in bilayer graphene combined with a nonmagnetic insulator, an evaporated bismuth oxide layer. The measured spin Hall effect raises most likely from an extrinsic mechanism. With a large spin-to-charge conversion efficiency, scalability, and ease of integration to electronic devices, we show a promising material heterostructure suitable for spin-based device applications.

cond-mat.mes-hall↗

arXiv2020

Tuning Ambipolarity in a Polymer Field Effect Transistor using Graphene electrodes

Polymer field-effect transistors with 2D graphene electrodes are devices that merge the best of two worlds: on the one hand, the low-cost and processability of organic materials and, on the other hand, the chemical robustness, extreme thinness and flexibility of graphene. Here, we demonstrate the tuning of the ambipolar nature of the semiconductor polymer N2200 from Polyera ActiveInk by incorporating graphene electrodes in a transistor geometry. Our devices show a balanced ambipolar behavior with high current ON-OFF ratio and charge carrier mobilities. These effects are caused by both the effective energy barrier modulation and by the weak electric field screening effect at the graphene-polymer interface. Our results provide a strategy to integrate 2D graphene electrodes in ambipolar transistors in order to improve and modulate their characteristics, paving the way for the design of novel organic electronic devices.

physics.app-ph↗

arXiv2020

Top Dielectric Induced Ambipolarity in an n-channel dual-gated Organic Field Effect Transistor

The realization of both p-type and n-type operations in a single organic field effect transistor (OFET) is critical for simplifying the design of complex organic circuits. Typically, only p-type or n-type operation is realized in an OFET, while the respective counterpart is either suppressed by charge trapping or limited by the injection barrier with the electrodes. Here we show that only the presence of a top dielectric turns an n-type polymer semiconductor (N2200, Polyera ActiveInk) into an ambipolar one, as detected from both bottom and top gated OFET operation. The effect is independent of the channel thickness and the top dielectric combinations. Variable temperature transfer characteristics show that both the electrons and holes can be equally transported through the bulk of the polymer semiconductor.

physics.app-ph↗

arXiv2020

Spin-orbit magnetic state readout in scaled ferromagnetic/heavy metal nanostructures

Efficient detection of the magnetic state at nanoscale dimensions is an important step to utilize spin logic devices for computing. Magnetoresistance effects have been hitherto used in magnetic state detection, but they suffer from energetically unfavorable scaling and do not generate an electromotive force that can be used to drive a circuit element for logic device applications. Here, we experimentally show that a favorable miniaturization law is possible via the use of spin-Hall detection of the in-plane magnetic state of a magnet. This scaling law allows us to obtain a giant signal by spin Hall effect in CoFe/Pt nanostructures and quantify an effective spin-to-charge conversion rate for the CoFe/Pt system. The spin-to-charge conversion can be described as a current source with an internal resistance, i.e., it generates an electromotive force that can be used to drive computing circuits. We predict that the spin-orbit detection of magnetic states can reach high efficiency at reduced dimensions, paving the way for scalable spin-orbit logic devices and memories.

cond-mat.mes-hall↗

arXiv2020

Absence of evidence of spin transport through amorphous Y$_3$Fe$_5$O$_{12}$

Long-distance transport of spin information in insulators without long-range magnetic order has been recently reported. Here, we perform a complete characterization of amorphous Y$_3$Fe$_5$O$_{12}$ (a-YIG) films grown on top of SiO$_2$. We confirm a clear amorphous structure and paramagnetic behavior of our a-YIG films, with semiconducting behavior resistivity that strongly decays with increasing temperature. The non-local transport measurements show a signal which is not compatible with spin transport and can be attributed to the drop of the a-YIG resistivity caused by Joule heating. Our results emphasize that exploring spin transport in amorphous materials requires careful procedures in order to exclude the charge contribution from the spin transport signals.

cond-mat.mtrl-sci↗

arXiv2019

Large multi-directional spin-to-charge conversion in low symmetry semimetal MoTe$_2$ at room temperature

Efficient and versatile spin-to-charge current conversion is crucial for the development of spintronic applications, which strongly rely on the ability to electrically generate and detect spin currents. In this context, the spin Hall effect has been widely studied in heavy metals with strong spin-orbit coupling. While the high crystal symmetry in these materials limits the conversion to the orthogonal configuration, unusual configurations are expected in low symmetry transition metal dichalcogenide semimetals, which could add flexibility to the electrical injection and detection of pure spin currents. Here, we report the observation of spin-to-charge conversion in MoTe$_2$ flakes, which are stacked in graphene lateral spin valves. We detect two distinct contributions arising from the conversion of two different spin orientations. In addition to the conventional conversion where the spin polarization is orthogonal to the charge current, we also detect a conversion where the spin polarization and the charge current are parallel. Both contributions, which could arise either from bulk spin Hall effect or surface Edelstein effect, show large efficiencies comparable to the best spin Hall metals and topological insulators. Our finding enables the simultaneous conversion of spin currents with any in-plane spin polarization in one single experimental configuration.

cond-mat.mes-hall↗

arXiv2019

Spin-Hall magnetoresistance in a low-dimensional magnetic insulator

We observe an unusual behavior of the spin Hall magnetoresistance (SMR) measured in a Pt ultra-thin film deposited on a ferromagnetic insulator, which is a tensile-strained LaCoO3 (LCO) thin film with the Curie temperature Tc=85K. The SMR displays a strong magnetic-field dependence below Tc, with the SMR amplitude continuing to increase (linearly) with increasing the field far beyond the saturation value of the ferromagnet. The SMR amplitude decreases gradually with raising the temperature across Tc and remains measurable even above Tc. Moreover, no hysteresis is observed in the field dependence of the SMR. These results indicate that a novel low-dimensional magnetic system forms on the surface of LCO and that the Pt/LCO interface decouples magnetically from the rest of the LCO thin film. To explain the experiment, we revisit the derivation of the SMR corrections and relate the spin-mixing conductances to the microscopic quantities describing the magnetism at the interface. Our results can be used as a technique to probe quantum magnetism on the surface of a magnetic insulator.

cond-mat.mes-hall↗

arXiv2019

Spin diffusion length of Permalloy using spin absorption in lateral spin valves

We employ the spin absorption technique in lateral spin valves to extract the spin diffusion length of Permalloy (Py) as a function of temperature and resistivity. A linear dependence of the spin diffusion length with conductivity of Py is observed, evidencing that Elliott-Yafet is the dominant spin relaxation mechanism in Permalloy. Completing the data set with additional data found in literature, we obtain $λ_{Py}= (0.91\pm 0.04) (fΩm^2)/ρ_{Py}$.

cond-mat.mes-hall↗

arXiv2019

Interfacial mechanism in the anomalous Hall effect of Co/Bi$_2$O$_3$ bilayers

Oxide interfaces are a source of spin-orbit coupling which can lead to novel spin-to-charge conversion effects. In this work the contribution of the Bi$_2$O$_3$ interface to the anomalous Hall effect of Co is experimentally studied in Co/Bi$_2$O$_3$ bilayers. We evidence a variation of 40% in the AHE of Co when a Bi$_2$O$_3$ capping layer is added to the ferromagnet. This strong variation is attributed to an additional source of asymmetric transport in Co/Bi$_2$O$_3$ bilayers that originates from the Co/Bi$_2$O$_3$ interface and contributes to the skew scattering.

cond-mat.mes-hall↗

arXiv2018

Spin-dependent Seebeck effect in non-local spin valve devices

We performed measurements of Py/Cu and Py/Ag lateral spin valves as function of injection current direction and magnitude. Above a 'critical' current, there is an unexpected dependence of spin injection on current direction. Positive currents show higher polarization of spin injection than negative. This implies that in addition to current-induced spin injection, there is a thermally induced injection from a spin-dependent Seebeck effect. A temperature gradient in the Py electrode, caused by Joule heating, is responsible for injecting excess spins into the non-magnetic channel. This effect has important consequences for understanding high-current spin-based devices, such as spin transfer torque devices.

cond-mat.mes-hall↗